I NEED HELP!!! NOT ENOUGH DYNAMIC MEMORY TO LOAD FORM

Has anyone ever seen that error before for MIDP J2ME? There is a ton of free available memory on the PDA, but it still gives me this error, does anyone know why?!?

Don't know if this will help but there is a non-standard command line option:
java -Xmx
that sets the maximum heap size.

Similar Messages

Help!! Not Enough Dynamic Memory To Load Form

Has anyone ever seen this message before? Anyone out there programming J2ME and MIDP? I seriously need help, as I could not get rid of this problem I don't know what to do

use IBM's J9 VM. :))
I had this problem whith PersonalJava on iPaq. There it is solved if you make something like thi sbefore loading the form:
   System.gc();
   try{ Thread.sleep( xx);}
   catch( Exception e){}
   //load your form

Not enough dynamic memory to load Form

hi,
when i run an application on a palm(handspring treo) i got this error , and it couldnt even start the interface..There was no problem running it on "sony clie". and the Form at the beggining has only 6 buttons and their listeners.also there was an image but i ignored it after getting this error, but nothing changed..
then i tried a sample application containing a form, it worked..
so , any one has any idea??
can it be about the RecordStore initilizations, i have 4 of them, but why did it gave a Form error

ok. ifound the answer..
if ya gott this error, try to lower the heap size in HQ at the device below 64K so that it can handle these kinda interface initilizations...

There is not enough free memory to load the entire file

I saw an older reference to this error in a previous post which apparently got resolved, but didn't explain precisely how it got resolved:
Michael Kitzmiller, "There is not enough free memory to load the entire file" #, 27 Jul 2007 5:23 am
I presume that one answer is to rebuild the document from scratch, changing imported images to referenced images. But I want to recover the file as I put hours of work into it and expected that anything I can save that I also should be able to read back in. I will certainly change to referenced images, but I have to be able to open it first.
thank you

Web...
Here is a smattering of ideas.
Do you have ample unused HDD space? If not, defrag it, although in myu experience, this hardly makes a difference. Check your TEMP/TMP folders and clean them out. Consider downloading cCleaner and running it. Do everything you can to make ample room on your HDD and in places like your TEMP folders. If your HDD is congested, temporarily remove big but relatively unimportant applications and move data elsewhere for a while.
Even with 4GB of RAM, Frame can only use somewhere between 2.7 - 3.2 GB of it under the very best of conditions, and that includes the application as well as the files. Unpacking image files can consume considerably more space than it takes to store them. For example, a 1024 x 768 color image requires more than 3.1MB to describe it as a 32-bit color image, yet when stored in JPEG format, it can be as small as 50kB, a compression of 65:1. Of course, it's not reasonable to assume that your document is comprised entirely of such highly-compressed images, but in the unachievable extreme, it would take 980MB to simultaneously open 15MB worth of those kind of files. The point here is to not fall into the trap of thinking a 15MB file comprising a lot of images needs little more than 15MB of RAM.
Make sure ALL other applications are closed when trying to open your file...Outlook, IE or FireFox, Anti-Virus and Spyware apps, Word, etc.
Consider sending a copy of the file to someone else to see if they can open it for you and delete some of the images before resaving it. If you have a backup copy, rename your current file and restore the backup. Maybe your working copy is corrupt. Who knows? Anything is probably worth trying as long as you have a save copy stored somewhere.
Dennis...

"Not enough system memory" when there is?

Hi,
Yesterday I had a screen freeze and did a forced restart. After that I've been having a problem that will not go away, altho I have run Disk Warrior and Disk First Aid.
When I try to launch applications I'm sometimes getting an error message saying: "There is not enough system memory, please close an application, etc."
The puzzle is that I have plenty of free available memory when I'm getting this message. It also seems to jump between applications. First I couldn't open Word. Now Word launches but I can't open Internet Explorer, altho Mozilla launched okay. Re-starting and running Disk Warrior didn't help. I don't get it. What else should I do?
Thanks much!

Hi, Paul -
Is it possible for it to change itself during a mishap (freeze)?
It's just about impossible for that to happen. When a program's memory allocation settings are changed, the new numbers are not entered in an external document like most prefs setting. Instead, it changes a bit of the code in one of the resources in the program itself (judicious use of ResEdit will reveal this). For just that particular piece of code to be altered in an acceptable way as the result of a freeze is nigh impossible.
However, there is a utility program named Reaper whiuch will make such changes with no input from the user. Its purpose is to automatically change the memory allocations for programs based on perceived usage and need. Unfortunately it will make such changes according to its logic, which is not constrained by the logic of the user.
Check to see if Reaper has been installed. It uses a control panel as a user interface; not sure what the name of that control panel is, but it may be Reaper. If you find it has been installed, try deactivating it.

Safari hangs: not enough program memory, while 90G HD and 4G ram, OS re-installed, removed files etc. (mac book pro, leopard)

Safari hangs direct after starting up. Rainbow bol rotates around one hour after which a message is shown: "not enough program memory"
More than 90G free on HD, even removed more files and installed OS and programs again. Nothing helps.
Help

SIG, thanks for your reaction. After reading my question again I understand it was not clear.
The reason I mentioned the 90G free HD space was the information I found on internet about my problem in which it was assumed there was not enough RAM memory and the processor uses the HD for SWAP files?
In any way my problem is still there and I like to add some information:
MACBookPro OSX 10.6.7, 2.4 GHz duo, 4GB DDR3 RAM, L2 cache 3MB, 250 GB HD (90 GB free).
What I have done untill now:
Re-install OSX plus programs
Reboot in safe mode (cold start with shift C pressed)
A number of reports generated after a forced Safari stop were send to Apple. (by the way what are they doing with these? besides not helping me?).
Just today I learned where to find the Safari cache file's which I will empty when I am back from work tonight.
I hope, with this additional information you have some more suggestions. In any way I will come back with the result of emptying the Safari cache.

Photoshop CS3 "Not enough scratch memory available" error.

Hi,
I am Using Adobe Photoshop CS3 Version 10.0 and I keep getting the error "Not enough Scratch memory available to perform this action" whenever I try to Save a .psd file to a .jpg/.jpeg file.
I did go to Edit -> Preferences -> Performance, and add my other two partitions as scratch disks, also put up my E: drive as the primary scratch disk on the top of the list (Which has 80GB's of space) but I still keep getting this error.
My file (the .psd that i am trying to save to a .jpg) has a total size of 56MB and 300dpi with 4 or 5 layers in it and the target jpg file is supposed to be 12inches by 20inches.
Some other things I have tried is celaring the %temp% folder, Defragmenting my Hard Drive(s), Disk Cleanup, set my System Page file to 4GB, but all this is of no use.
I know that I have enough RAM and Hard disk space so please help me get rid of this problem.
Also, this maybe a stupid question but, does the type of RAM and Processor you are using effect this? I have a DDR RAM.. 2GB, I know its outdated, its our office computer I am working on.. My Processor is a Core 2 Duo which isnt bad.
HELP PLEASE!!!

I think Varun is mistaking one's forums Join Date for a post time stamp.
I'm moving this post from this forum for photoshop-dot-com (an online portal) to the correct forum for Photoshop pro users like yourselves.
FYI, the correct forum URL is: http://forums.adobe.com/community/photoshop
Since you've posted in this forum for Photoshop.com, you may receive additional posts in this forum unless you update your profile. After signing in on these forums, go to Your Stuff > Forums, and disable any forum you don't want to watch.
Kind regards,
Charlie

Yosemite - says "not enough application memory - and closes all open applications

Since the day I installed Yosemite I have had problems. First, some other file was downloaded when I did the Yosemite install which crashed the computer. It had to go in for repair. Once that was remedied, I frequently get an error message "Not enough
application Memory and it starts automatically shutting down all of my programs. Normally, first to go is Mail, then Google (Safari would not work with Maverick - it would freeze) then Photoshop and whatever else is open. I did not have this problem with Maverick. This is a pain!
I am working on a 2009 Mac Pro with 24 MB Ram.
Any ideas about what is going on and how to remedy it. I would appreciate it. Thanks

There is excessive swapping of data between physical memory (that is, the memory chips on the logic board) and virtual memory (one or more files on the startup volume.) That activity is relatively slow and causes the whole system to be less responsive. It can happen for two reasons:
          A long-running process with a memory leak (a kind of bug)
          Not enough memory for your usage pattern
Tracking down a memory leak can be difficult, and it may come down to a process of elimination.
These instructions are for OS X 10.9 and later. Some details may be slightly different for earlier versions of OS X.
When you notice the swap activity, open the Activity Monitor application and select All Processes from the View menu, if it's not already selected. Select the Memory tab. Click the heading of the Real Mem column in the process table twice to sort the table with the highest value at the top. If you don't see that column, select
          View ▹ Columns ▹ Real Memory
from the menu bar.
If one process (excluding "kernel_task") is using much more memory than all the others, that could be an indication of a leak. A better indication would be a process that continually grabs more and more real memory over time without ever releasing it. Here is an example of how it's done.
The processes named "Safari Web Content" render web pages for Safari. They use a lot of memory and may leak if certain Safari extensions or third-party web plugins are installed. Consider them prime suspects.
Another process often implicated in memory leaks is "inkjet4" or "inkjet8," which is a component of the HP printing software. If it's present, force-quit the process in Activity Monitor to solve the problem temporarily. Empty the print queues in the Printers & Scanners preference pane (which has a slightly different name in each recent version of OS X.) If you don't use an HP printer, remove the software. Otherwise, if the problem is recurrent, update the software (which may not help) or contact HP support.
"Wired" memory should be a small part of the total. That memory is not swapped, but it makes less physical memory available which may then result in swapping. If you have a lot of wired memory, that's usually an indication of a memory leak in a third-party program that modifies the operating system at a low level. Ask for guidance in that case.
If you don't have an obvious memory leak, your options are to install more memory (if possible) or to run fewer programs simultaneously.
The next suggestion is only for users familiar with the shell. For a more precise, but potentially misleading, test, run the following command:
sudo leaks -nocontext -nostacks process | grep total
where process is the name of a process you suspect of leaking memory. Almost every process will leak some memory; the question is how much, and especially how much the leak increases with time. I can’t be more specific. See the leaks(1) man page and the Apple developer documentation for details.

Not enough physical memory is available to power on this virtual machine with its configured settings.

hi ... My opering system is windows 8.1 and my system RAM is 6 GB with intel core i3 processor...
I got error in vmvare " not enough physical memory to start virtual machine. then after some day i visit at your webside and read the bolg about this error solution and i uninstalled the microsofts update like
"KB2995388" then reboot the system, after that i search config.ini file in drive "C:\Program Files (x86)\VMware\VMware Workstation" but i did'nt got this file, so i created a new "config.ini" file and write one line
vmmon.disableHostParameters = “TRUE” and save the file , then i copied this file to vmware workstation , like this path 'C:\Program Files (x86)\VMware\VMware Workstation' after that i opened my vmware and power on virtula machine but still i getting same error like not enough physical memory..........plesae any one can help me ? and give me a better solution to solve this problem ?

Welcome to the Community,
without any details about the VMware Workstation version you are using and the blog you read it's pretty hard to help. Anyway, the issue you mentioned was resolved with VMware Workstation 10.0.4 (see VMware Workstation 10.0.4 Release Notes), so in case you are running an older version it may be worth updating.
André
Message was edited by: a.p. - Fixed typo in version number 10.0.4 (instead of 10.4)

2146827284Microsoft Excel cannot open or save any more documents because there is not enough available memory or disk space

Hi Experts,
I am getting below error when Exporting data from my one web application to the Excel 2010 on Windows Server 2008 R2 ,
02/29/2012 18:54:50
Type : System.Exception, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b11a5c481859e569
Message : -2146827284Microsoft Excel cannot open or save any more documents because there is not enough available memory or disk space.
• To make more memory available, close workbooks or programs you no longer need.
• To free disk space, delete files you no longer need from the disk you are saving to.
The disk space is 30 GB free, I have cleared all the temp files, increased the virtual memory & internet temp files size to max but no luck

You want to use this one here - MMC
comexp.msc /32
THAT will launch the MMC process
as 32 bit then you'll the Microsoft Excel Application.
Right Click -> Properties.
What I did at this point was to select the Identity tab and then select "The Interactive User" (the default was "The launching user"). My app pool was already running as "LocalSystem". I believe by running it as the Interactive User now that it
has the right permissions to save workbooks.
Everything worked after this.
This was a tough one!
R. Matt Sampson

I need Help with the dynamic link feature in CS3

Hi I was wondering if anyone could help me with an issue I am having? I have the adobe cs3 master collection. Having watched tutorials on the dynamic link feature my version seems not to have the same options as those I have viewed. I wish to send my premiere video creation to encore using dynamic link, however when I click "file" and then "adobe dynamic link" the only options available are about "adobe after effects". I can export to encore however I am only alloowed to export one premiere sequence to one new encore file, I cannot create an encore file and import several premiere sequence into the same encore project. That means currently I can only have an encore creation with one premiere sequence in it, and I have no adobe dynamic link. Any help anyone could offer would be greatly appreciated.

Thanks very much for that guys but my premiere media encoder only lets me export as: MPEG1, MPEG1-VCD, MPEG2, MPEG2 blu-ray, MPEG2-DVD, MPEG2-SVCD, H.264, H.264 blu-ray, Adobe Flash Video, Quicktime, Real Media, Windows Media. Are any of these formats DV AVI?
Am I to export my videos direct to encore or save them elsewhere (e.g desktop). It seems that I cannot export sequences from different premiere projects to the same encore project.
Sorry if any of these questions seem obvious, I am just new to premiere and keen to do things right from the off.
Many thanks again guys.
Date: Tue, 24 Nov 2009 19:32:47 -0700
From: [email protected]
To: [email protected]
Subject: I need Help with the dynamic link feature in CS3
Harm is correct. For SD DVD, exporting as a DV AVI file from Pr will give you good results. Encore's Automatic Transcoding will give you maximum quality for the available disc space.
-Jeff
>

Not enough app memory

not enough app memory error message

It would be helpful if you indicated the model/year of your MBP, the OSX that is installed and the amount of RAM that is in the MBP.
Ciao.

C2-03 Not enough device memory availabe.

Hi,
I am facing very strange problems with my device.
The phone internal memory is only 7.2 MB memory. Even Nokia site shows it has 10MB memory.
out of this 7.2 MB the phone packed with 4.7 MB of default apps in "Apps and games", and Gallery contains some defaults pictures and default Nokia Ringtones and message tones of 2.0 MB data.
Also messaging App showing 417 KB of memory used.
Now my phone has only 400-600 KB memory left. And when i run the apps like. Nokia Maps, OVI Store. etc... then apps doesn't start and show message like: "Not enough device memory availabe."
I have factory restored my phone and checked the memory still full. I can't delete the games which are totally waste for me. Also there is no option to move any default apps to memory card.
Even i can't download any single software from third party sites which is large in size more than 300KB..
This phone is working like hell and i am very furstrared with it's poorely implemeted software.
I have no any single Text/MMS stored in my phone memory. but it is still showing 417KB data used in messaging.
Also when i try to apply any theme then it always shows "Please free some memory."
I'm wonderring how can i free such memory.
Please provide any option to delete (for games ) or move the apps to memory card which or not useful for everyone.
my older phone had have everything line 30 MB internal memory, Copy paste option, youtube video
Also make sure if these features are coming in the next frequent update or not. otherwise it is good to use a dumb phone along with my old phone.
waiting for your kind reply
Best regards,
Vikas Patidar

Kindly Update the phone SW to the latest version , all this game and some applications moved to MMC in the latest one , Try it and feed u Back
If I've helped in any way, a click upon the white star at bottom right of screen would always be appreciated.
However if my answer also solves your problem clickingbelow it will benefit other users!

There is not enough free memory to run this program

Hi all,
I am running into an issue with OfficeXP SP3 that has been virtualized using ZAV 8.0.1 and registered using the msi method. First, when you try to open a document from a web browser (Firefox in my case) it will open the downloads window and show the file but never launch the virtualized Office. Then if you try double-clicking on the document in the downloads window, nothing happens. If you open the folder that the document was saved to and double-click on it nothing happens. If you go into open with and choose the virtualized officexp it gives this error: "There is not enough free memory to run this program. Quit one or more programs, and then try again."
Now here is the really odd thing, you can double-click on a word/excel/etc document in MyDocuments, a network drive, anywhere and it will open the appropriate officexp application just fine. I will also mention that firefox is virtualized as well but the same process works fine with openoffice.org.
This also happens if you choose to save the file to a specific location. It cannot be opened. However I just discovered that if you move it to somewhere else, say the desktop, it will open just fine.
Anyone have an idea what might be causing this issue? Is it somehow related to the sandbox?
Thanks,

Look in the class section of the registry for the FF virt app... See if some of the same extentions are in there.
I would guess that FF has its own file associations for those document types and that is whats failing.
If you remove the file association conents (but leave the folder and set isoation to writecopy) then the FF virt should be able to view and use the workstation file associations for the virt XP.

"There is not enough virtual memory available. Please save your work and restart {0}"

This seems to be the most recent similar post. Prior posts are not useful as they have supposedly been fixed. The most relevant Microsoft connect case has been closed. The reported new Microsoft connect case has been deleted without explanation.
https://social.msdn.microsoft.com/Forums/expression/en-US/294b17e4-c986-4dc3-9fa6-b246a50a4339/vs-2013-update-4-there-is-not-enough-virtual-memory-availableerror?forum=visualstudiogeneral
Yet, still the problem persists. Only working on one small XAML file. VS2013 and Blend always report "There is not enough virtual memory available. Please save your work and restart {0}" (except when they report "Package 'DesignPackage'
failed to load" when run in safe mode) Saved my work and restarted VS2013, Blend, and the computer. Followed all other suggestions as much as possible.
There is an abundant available and virtual memory. The only changes from last week to this is Microsoft updates.
Has there been any new effort on this issue that I have missed?
What is left to do?

Get IT to do it. Get them to uninstall all the latest updates, since you can identify them as a proximal cause of the problem. Also, search MS Knowledge Base or do some googling for the exact error text.
We have no tech support resorces; we're just users.
A horse walks into a bar. The bartender asks "Why the long face?" "Because I was born into servitude and when I die my hooves will be used to make glue." It was at this point that the bartender realized he would not be getting a tip.

I NEED HELP!!! NOT ENOUGH DYNAMIC MEMORY TO LOAD FORM

Similar Messages

Maybe you are looking for