I need help on how to fix this

Ok, ive tried everything...
My comp crashed and at the same time so did my ipod 4th gen. it was chaos so i didnt have the software on my comp.
What happened was my ipod froze and i reset it and it came up with a sad face. Sometimes it comes up with a folder with the esclamation point or a battery sign.
I set it in disk mode and tried to install it and it didnt work. can i send this in or can somebody help me with it
4th Generation   Windows XP  

Hello,
If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
http://docs.info.apple.com/article.html?artnum=60983
If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
Make sure you do all the following “TRYs”
A. Try to wait 30 minutes while iPod is charging.
B. Try another FireWire or USB through Dock Connector cable.
C. Try another FireWire or USB port on your computer .
D. Try to disconnect all devices from your computer's FireWire and USB ports.
E. Try to download and install the latest version of iPod software and iTunes
http://www.apple.com/ipod/download/
http://www.apple.com/itunes/download/
F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
http://www.apple.com/support/ipod/five_rs/
G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
http://docs.info.apple.com/article.html?artnum=93651
If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
Intermediate Level
A. Try to connect your iPod with another computer with the iPod updater pre-installed.
B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
For Mac computer
1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
5. Eject your iPod and do a Reset
6. Open the iPod Updater and click “Restore”
For Window computer
Go to folder “My Computer”
Hope you can see your iPod there and right click on the iPod
Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
Now select “Format”
Eject your iPod and do a Reset
Open the iPod Updater and click “Restore”
In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“Partition Magic”.
C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
Tips
a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iPod updater.
b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
http://discussions.apple.com/thread.jspa?messageID=2364921&#2364921
Advance Level
A. Diagnostic mode solution
If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
iPod 1G to 3G: "Menu" and "Play/Pause"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
iPod 1G to 3G: "REW", "FFW" and "Select"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
B. Format your iPod with a start disk
I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
If none of these steps address the issue, your iPod may need to be repaired.
Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
Or visit your local Apple Retail Store http://www.apple.com/retail/
In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ at your own risk
http://www.ipodresq.com/index.php
Just in case that you are at the following situation
Your iPod warranty is expired
You don’t want to pay any service charges
You are prepared to buy a new one
You can’t accept the re-sell value of your broken iPod
Rather than leave your iPod as paper-weight or throw it away.
You can try the following, but again, only do it as your last resort and at your own risk.
Warning ! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
Last Resort Level
1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery and HDD replacement (with Quicktimes)
http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html
2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
http://discussions.apple.com/thread.jspa?messageID=2438774#2438774
Have I tried these myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
What should I do with my iPod? Send it or keep it?
http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
Strange error on iPod (probably death)
http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
Sad Face on iPod for no apparent reason
http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
Meeting the Sad iPod icon
http://askpang.typepad.com/relevanthistory/2004/11/meeting_thesad.html#comment-10519524
Sad faced iPod, but my computer won’t recognize it?
http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
iPod Photo: unhappy icon + warranty question
http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
4th Gen iPod Users - are we all having the same problem?
http://discussions.apple.com/message.jspa?messageID=2235623#2235623
Low Battery, and clicking sounds
http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
Sad faced iPod, but my computer won’t recognize it
http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
Sad iPod solution
http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
Re: try to restore ipod and it says "can't mount ipod"
http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
iPod making clicking noise and is frozen
http://discussions.apple.com/thread.jspa?messageID=2420150#2420150
I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.

Similar Messages

  • I have a small problem i need help on how to fix this

    i downloaded a program with firefox "MP3Rocket version 6.0.6 Pro" when i want to start it up the program this happons:
    Copy Raport
    MP3Rocket version 6.0.6 Pro
    Java version 1.7.0_05 from Oracle Corporation
    Windows 7 v. 6.1 on x86
    Free/total memory: 15129208/16252928
    com.limegroup.gnutella.gui.GUILoader$StartupFailedException: file [vorbisspi.jar] has hash of [C02D434882D9212EE92A4D306FE01591] instead of expected [D840DAF0B8D76AE8F3B134647C38DF25]
    at com.limegroup.gnutella.gui.GUILoader.verifyHashes(Unknown Source)
    at com.limegroup.gnutella.gui.GUILoader.sanityCheck(Unknown Source)
    at com.limegroup.gnutella.gui.GUILoader.load(Unknown Source)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
    at java.lang.reflect.Method.invoke(Unknown Source)
    at com.limegroup.gnutella.gui.Main.main(Unknown Source)
    STARTUP ERROR!
    FILES IN CURRENT DIRECTORY:
    C:\Program Files (x86)\MP3 Rocket\gamespro1.zip
    LAST MODIFIED: 1304444080000
    SIZE: 90373
    C:\Program Files (x86)\MP3 Rocket\install.exe
    LAST MODIFIED: 1339081792000
    SIZE: 12873652
    C:\Program Files (x86)\MP3 Rocket\lib
    LAST MODIFIED: 1340012736772
    SIZE: 16384
    C:\Program Files (x86)\MP3 Rocket\License.txt
    LAST MODIFIED: 1304444080000
    SIZE: 17719
    C:\Program Files (x86)\MP3 Rocket\lua5.1.dll
    LAST MODIFIED: 1340012503649
    SIZE: 325960
    C:\Program Files (x86)\MP3 Rocket\MP3 Rocket (Minimized).lnk
    LAST MODIFIED: 1340012727855
    SIZE: 1931
    C:\Program Files (x86)\MP3 Rocket\MP3List.exe
    LAST MODIFIED: 1304529678000
    SIZE: 9838592
    C:\Program Files (x86)\MP3 Rocket\MP3Rocket.exe
    LAST MODIFIED: 1304444080000
    SIZE: 175104
    C:\Program Files (x86)\MP3 Rocket\MP3Rocket.ico
    LAST MODIFIED: 1304529676000
    SIZE: 33982
    C:\Program Files (x86)\MP3 Rocket\player.swf
    LAST MODIFIED: 1304444080000
    SIZE: 91375
    C:\Program Files (x86)\MP3 Rocket\radiopro1.zip
    LAST MODIFIED: 1304444080000
    SIZE: 165732
    C:\Program Files (x86)\MP3 Rocket\resource
    LAST MODIFIED: 1340012656143
    SIZE: 4096
    C:\Program Files (x86)\MP3 Rocket\root
    LAST MODIFIED: 1340012655983
    SIZE: 0
    C:\Program Files (x86)\MP3 Rocket\swfobject.js
    LAST MODIFIED: 1304444080000
    SIZE: 6887
    C:\Program Files (x86)\MP3 Rocket\tvpro7.zip
    LAST MODIFIED: 1304444080000
    SIZE: 311081
    C:\Program Files (x86)\MP3 Rocket\Uninstall
    LAST MODIFIED: 1340012503649
    SIZE: 4096
    C:\Program Files (x86)\MP3 Rocket\uninstall.exe
    LAST MODIFIED: 1340012736800
    SIZE: 130597
    C:\Program Files (x86)\MP3 Rocket\uninstall.ico
    LAST MODIFIED: 1304444080000
    SIZE: 33982
    C:\Program Files (x86)\MP3 Rocket\xml.war
    LAST MODIFIED: 1304529676000
    SIZE: 17356
    ? help ?

    hello, this is an issue with the program and/or java & not related to firefox, so we probably can't help you with that...

  • Every time i try to press new tab nothing happens it wont open, i need help on how to fix this

    I'm unable to open a new tab in Firefox. I've tried restarting Firefox, pressing Ctrl t, and going to file and pressing new tab. but none of it is working. does anyone know ow to fix this

    This issue can be caused by an extension that isn't working properly.
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    You can use the SearchReset extension to reset some preferences to the default values.
    *https://addons.mozilla.org/firefox/addon/searchreset/
    Note that the SearchReset extension only runs once and then uninstalls automatically, so it won't show on the "Firefox > Add-ons" page (about:addons).

  • MacBook 2008 wifi suddenly stopped working and says no wifi hardware. Took it to an apple shop, they said it could be the airport card but wouldn't do anymore then that.  Any help on how to fix this? How do I know if it is the airport card or not?

    MacBook 2008 wifi suddenly stopped working and says no wifi hardware. Took it to an apple shop, they said it could be the airport card but wouldn't do anymore then that.
    Any help on how to fix this? How do I know if it is the airport card or not?
    is there anything else I can try first?
    thanks

    If the technician at the shop is competent, he has given you a diagnosis that should have identified the problem.  You could run the Apple Hardware Test to verify the findings:
    https://support.apple.com/en-us/HT201257
    Note the Apple Hardware Test is not definitive.
    Go to the iFixit.com and Powerbookmedic.com web sites.  They have parts and installation instructions.  To install an Airport card is fairly easy.
    Ciao.

  • WiFi is disabled, i am not able to on my WiFi my version is IOS 6.1.2 latest version. Please help me how to fix this.

    WiFi is disabled, i am not able to on my WiFi my version is IOS 6.1.2 latest version. Please help me how to fix this.

    see this support article:
    http://www.apple.com/support/iphone/wifi/

  • WiFi is disabled, i am not able to on my WiFi my version of IOS 6.1.2 latest version. Please help me how to fix this.

    WiFi is disabled, i am not able to on my WiFi my version of IOS 6.1.2 latest version. Please help me how to fix this.

    see this support article:
    http://www.apple.com/support/iphone/wifi/

  • My wife and I have separate AppleID accounts and always have. For some reason after she bought the iPhone 5c, whenever she tries to update her apps, it comes up for my AppleID and asks for my password. Please help on how to fix this!

    My wife and I have separate AppleID accounts. Ever since she updated to the iPhone 5c, for some reason when she tries to update her apps, it comes up with my AppleID and asks for my password.  I cannot figure out why this happening and how to fix this.  Please help!

    I have had this issue lately.
    I can only put it down to using the one computer to update all our IPads for me and my wife.
    Some of our apps, although downloaded from both our seperate accounts on our IPads, are the same.
    However after plugging her IPad into the computer when my AppleID is on ITunes, I think something strange has happened and when she then tries to update Apps on her IPad and I try on mine it now asks for the others Apple ID password.
    The only way I have found to counteract this is to update an app one at a time, if that app asks for your wifes password then delete it and then reinstall it.
    That has solved it for me.
    Hope this helps

  • Ipod dissabled/ need help on how to fix it!

    My Ipod has been disabled because it wouldnt take my passcode. It said connect to Itunes and i need help on how to get back into it now. Can someone please help me?

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes       
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
    I could not read the blue text in your initial post, it is unreadable. In the future stick with black in normal font too.

  • Need help on how to do this :

    This might be a little off topic, but since it
    invovles a cf app, I thought I would post here for
    help.
    The problem I am having seems simple enough, but I cannot get
    it to work.
    My form contains two radio buttons and two input
    fields.
    Button 1 corresponds to field 1 and button 2
    corresonpds to field 2.
    One of the buttons must be select and I have
    javascript to check for that. Now here is my problem :
    If button 1 is selected, then field 1 must be filled
    in, and if button 2 is selected, then field 2 must be
    filled in.
    I have javascript to check for entries in the fields,
    but I cannot seem to combine both together to get them
    to work.
    So if they attempt to submit without checking one of
    the buttons, I display an error message. If they check
    button 1 and do not fill in field 1 and attempt to
    submit, then I need to display an alert (error
    message), same for button 2 and field 2.
    Can someone please help and show me how to do this ?
    Thanks

    quote:
    Originally posted by:
    trojnfn
    Can somebody please help me with this ?
    Writing down the requirements in english is a good way to go
    about it. Reading your first post I would understand your
    requirements to be
    1. if they attempt to submit without checking one of the
    buttons, I display an error message.
    2. If they check button 1 and do not fill in field 1 and
    attempt to submit, then I need to display an alert (error
    message)
    3. Repeat #2 for button 2 and field 2
    In psuedo-code that might translate to
    if (neither button is checked) {
    display error message
    else if (button1 is checked and field1 is empty) {
    display an error message
    else if (button2 is checked and field2 is empty) {
    display an error message
    else {
    everything is okay. submit the form
    Then translate that into javascript. The code needs some
    extra work like trimming values, but its a good starting point.
    I'll leave the rest up to you.
    <script language="javascript">
    // code assumes your form fields have the unique id's
    'button1' , 'button2' , 'field1', 'field2'.
    function validateForm(buyer_form) {
    //determine if buttons 1 and 2 are checked
    var isButton1Checked =
    document.getElementById('button1').checked;
    var isButton2Checked =
    document.getElementById('button2').checked;
    //get the values of fields 1 and 2
    var field1Value = document.getElementById('field1').value;
    var field2Value = document.getElementById('field2').value;
    //if neither button is checked
    if (!isButton1Checked && !isButton2Checked) {
    alert("Please Indicate whether you wish to send a NOR letter
    to this supplier, or not");
    //if button 1 is checked but field 1 is empty
    else if (isButton1Checked && field1Value == "") {
    alert("When button 1 is checked, you must enter a value in
    Field 1");
    //if button 2 is checked but field 2 is empty
    else if (isButton2Checked && field2Value == "") {
    alert("When button 2 is checked, you must enter a value in
    Field 2");
    //if okay, submit the form
    else {
    buyer_form.submit();
    </script>
    If you haven't already, you should familiarize yourself with
    DOM javascript. Elements should have a unique ID so they can be
    accessed using:
    document.getElementById('theIDOfTheElementYouWant'); Note, element
    ID is not the same as "name".
    http://www.w3schools.com/htmldom/met_doc_getelementbyid.asp

  • Need help on how to code this SQL statement! (one key has leading zeros)

    Good day, everyone!
    First of all, I apologize if this isn't the best forum.  I thought of putting it in the SAP Oracle database forum, but the messages there seemed to be geared outside of ABAP SELECTs and programming.  Here's my question:
    I would like to join the tables FMIFIIT and AUFK.  The INNER JOIN will be done between FMIFIIT's MEASURE (Funded Program) field, which is char(24), and AUFK's AUFNR (Order Number) field, which is char(12).
    The problem I'm having is this:  All of the values in AUFNR are preceeded by two zeros.  For example, if I have a MEASURE value of '5200000017', the corresponding value in AUFNR is '005200000017'.  Because I have my SQL statement coded to just match the two fields, I obviously get no records returned because, I assume, of those leading zeros.
    Unfortunately, I don't have a lot of experience coding SQL, so I'm not sure how to resolve this.
    Please help!  As always, I will award points to ALL helpful responses!
    Thanks!!
    Dave

    >
    Dave Packard wrote:
    > Good day, everyone!
    > I would like to join the tables FMIFIIT and AUFK.  The INNER JOIN will be done between FMIFIIT's MEASURE (Funded Program) field, which is char(24), and AUFK's AUFNR (Order Number) field, which is char(12).
    >
    > The problem I'm having is this:  All of the values in AUFNR are preceeded by two zeros.  For example, if I have a MEASURE value of '5200000017', the corresponding value in AUFNR is '005200000017'.  Because I have my SQL statement coded to just match the two fields, I obviously get no records returned because, I assume, of those leading zeros.
    > Dave
    You can't do a join like this in SAP's open SQL.  You could do it in real SQL ie EXEC.... ENDEXEC by using SUSBTR to strip off the leading zeros from AUFNR but this would not be a good idea because a)  modifying a column in the WHERE clause will stop any index on that column being used and b) using real SQL rather than open SQL is really not something that should be encouraged for database portability reasons etc. 
    Forget about a database join and do it in two stages; get your AUFK data into an itab, strip off the leading zeros, and then use FAE to get the FMIFIIT data (or do it the other way round). 
    I do hope you've got an index on your FMIFIIT MEASURE field (we don't have one here); otherwise your SELECT could be slow if the table holds a lot of data.

  • Really need help on how to write this program some 1 plz help me out here.

    i am new to java and i confused on how to be writing this program.
    i have completed the Part 1 but i am stuck on Part 2 & 3 so it would would be really great if any 1 could help me out on how to write the program.
    Part I
    An algorithm describes how a problem is solved in terms of the actions to be executed, and it specifies the order in which the actions should be executed. An algorithm must be detailed enough so that you can "walk" through the algorithm with test data. This means the algorithm must include all the necessary calculations.
    Here is an algorithm that calculates the cost of a rectangular window. The
    total cost of a window is based on two prices; the cost of the glass plus the cost of the metal frame around the glass. The glass is 50 cents per
    square inch (area) and the metal frame is 75 cents per inch (perimeter).
    The length and width of the window will be entered by the user. The
    output of the program should be the length and width (entered by the user)
    and the total cost of the window.
    FORMULAS:
    area = length times width perimeter = 2 times (length plus width)
    Here is the corresponding algorithm:
    read in the length of the window in inches
    read in the width of the window in inches
    compute the area
    compute the cost of the glass (area times 50 cents)
    compute the perimeter
    compute the cost of the frame (perimeter times 75 cents)
    compute the total cost of the window (cost of glass plus cost of frame)
    display the length, width and total cost
    The next step would be to "desk check" the algorithm. First you would need to make up the "test data". For this algorithm, the test data would involve making up a length and a width, and then calculating the cost of the window based on those values. The results are computing by hand or using a calculator. The results of your test data are always calculated before translating your algorithm into a programming language. Here is an example of the test data for the problem given:
    length = 10
    width = 20
    area = 200, glass cost= 100.00 (area times 50 cents)
    perimeter = 60, frame cost = 45.00 (perimeter times 75 cents)
    total cost =145.00
    Once the test data is chosen, you should "walk" through the algorithm using the test data to see if the algorithm produces the same answers that you obtained from your calculations.
    If the results are the same, then you would begin translating your algorithm into a programming language. If the results are not the same, then you would attempt to find out what part of the algorithm is incorrect and correct it. It is also
    necessary to re-check your hand calculations.
    Each time you revise your algorithm, you should walk through it with your test data again. You keep revising your algorithm until it produces the same answers as your test data.
    ?Now write and submit a Java program that will calculate the cost of a rectangular window according to the algorithm explained. Be sure to prompt for input and label your output.?
    Part II
    Write, compile and execute a Java program that displays the following prompts:
    Enter an integer.
    Enter a second integer
    Enter a third integer.
    Enter a fourth integer.
    After each prompt is displayed, your program should use the nextint method of the Scanner class to accept a number from the keyboard for the displayed
    prompt. After the fourth integer has been entered, your program should calculate and display the average of the four integers and the value of the first integer entered raised to the power of the second integer entered. The average and result of raising to a power should be included in an appropriate messages
    (labels).
    Sample Test Data:
    Set 1: 100 100 100 100
    Set 2: 100 0 100 0
    Be sure to write an algorithm first before attempting to write the Java code. Walk through your algorithm with test data to be sure it works as anticipated.
    Part III
    Repeat Part lI but only calculate the average, not the power. This time, make sure to use the same variable name, number, for each of the four numbers input. Also use the variable sum for the sum of the numbers. (Hint: To do this, you may use the statement sum = sum + number after each number is read.)
    For Part 1 this is what i got
    import java.util.Scanner;
    public class Window
         public static void main(String[] args)
              double length, width, glass_cost, perimeter, frame_cost, area, total;
              Scanner keyboard = new Scanner (System.in);
              System.out.println("Enter the length of the window in inches");
              length = keyboard.nextInt();
              System.out.println("Enter the width of the window in inches");
              width = keyboard.nextInt();
              area = length * width;
              glass_cost = area * .5;
              perimeter = 2 * (length + width);
              frame_cost = perimeter * .75;
              total = glass_cost + frame_cost;
                   System.out.println("The Length of the window is " + length + "inches");
                   System.out.println("The Width of the window is " + length + "inches");
                   System.out.println("The total cost of the window is $ " + total);
         Enter the length of the window in inches
         5
         Enter the width of the window in inches
         8
         The Length of the window is 5.0inches
         The Width of the window is 5.0inches
         The total cost of the window is $ 39.5
    Press any key to continue . . .
    Edited by: Adhi on Feb 24, 2008 10:33 AM

    Adhi wrote:
    i am new to java and i confused on how to be writing this program.
    i have completed the Part 1 but i am stuck on Part 2 & 3 so it would would be really great if any 1 could help me out on how to write the program.Looks like homework to me.
    What have you written so far? Post it.
    Part I
    An algorithm describes how a problem is solved in terms of the actions to be executed, and it specifies the order in which the actions should be executed. An algorithm must be detailed enough so that you can "walk" through the algorithm with test data. This means the algorithm must include all the necessary calculations.
    Here is an algorithm that calculates the cost of a rectangular window. The
    total cost of a window is based on two prices; the cost of the glass plus the cost of the metal frame around the glass. The glass is 50 cents per
    square inch (area) and the metal frame is 75 cents per inch (perimeter).
    The length and width of the window will be entered by the user. The
    output of the program should be the length and width (entered by the user)
    and the total cost of the window.
    FORMULAS:
    area = length times width perimeter = 2 times (length plus width)
    Here is the corresponding algorithm:
    read in the length of the window in inches
    read in the width of the window in inches
    compute the area
    compute the cost of the glass (area times 50 cents)
    compute the perimeter
    compute the cost of the frame (perimeter times 75 cents)
    compute the total cost of the window (cost of glass plus cost of frame)
    display the length, width and total cost
    The next step would be to "desk check" the algorithm. First you would need to make up the "test data". For this algorithm, the test data would involve making up a length and a width, and then calculating the cost of the window based on those values. The results are computing by hand or using a calculator. The results of your test data are always calculated before translating your algorithm into a programming language. Here is an example of the test data for the problem given:
    length = 10
    width = 20
    area = 200, glass cost= 100.00 (area times 50 cents)
    perimeter = 60, frame cost = 45.00 (perimeter times 75 cents)
    total cost =145.00
    Once the test data is chosen, you should "walk" through the algorithm using the test data to see if the algorithm produces the same answers that you obtained from your calculations.
    If the results are the same, then you would begin translating your algorithm into a programming language. If the results are not the same, then you would attempt to find out what part of the algorithm is incorrect and correct it. It is also
    necessary to re-check your hand calculations.
    Each time you revise your algorithm, you should walk through it with your test data again. You keep revising your algorithm until it produces the same answers as your test data.
    &#147;Now write and submit a Java program that will calculate the cost of a rectangular window according to the algorithm explained. Be sure to prompt for input and label your output.&#148;
    Part II
    Write, compile and execute a Java program that displays the following prompts:
    Enter an integer.
    Enter a second integer
    Enter a third integer.
    Enter a fourth integer.
    After each prompt is displayed, your program should use the nextint method of the Scanner class to accept a number from the keyboard for the displayed
    prompt. After the fourth integer has been entered, your program should calculate and display the average of the four integers and the value of the first integer entered raised to the power of the second integer entered. The average and result of raising to a power should be included in an appropriate messages
    (labels).
    Sample Test Data:
    Set 1: 100 100 100 100
    Set 2: 100 0 100 0
    Be sure to write an algorithm first before attempting to write the Java code. Walk through your algorithm with test data to be sure it works as anticipated.So this is where you actually have to do something. My guess is that you've done nothing so far.
    Part III
    Repeat Part lI but only calculate the average, not the power. This time, make sure to use the same variable name, number, for each of the four numbers input. Also use the variable sum for the sum of the numbers. (Hint: To do this, you may use the statement sum = sum + number after each number is read.)Man, this specification writes itself. Sit down and start coding.
    One bit of advice: Nobody here takes kindly to lazy, stupid students who are just trying to con somebody into doing their homework for them. If that's you, better have your asbestos underpants on.
    %

  • Pictures that I have stored on my laptop are fine but all of the pictures online are blurry and I just need to know how to fix this problem?

    This has just started happening recently but all the pictures online look very pixely. I've started to notice this on facebook and other websites like Bing.com. I can't figure out what the problem is and have tried messing with my screen resolution but nothing seems to be working.

    I am having the same problem after ugrading to Mountain Lion 10.8.4.
    I found on the net a guy who says to do the following "log in as root and trash the old user icon images file. Then copy the folder froma ML factory disk image and restart". I can't get back to the original post-- tried buy it no longer seems to be there.
    OK-- I don't understand how to do any of that.  I need to know: 1.  what is the name of the folder I am supposed to trash what is the path to get to it. 2. Where do I get the new folder to replace it with and where do I put it.  
    I would really appreciate help. Thank you.

  • If my ipod shuts off my calender and the time defaults back to January 1st. Help on how to fix this please :)

    I need help

    Did you already try to reset your ipod by holding the sleep and home button until the Apple logo comes back again?
    If this does not help, try to restore: http://support.apple.com/kb/HT1414

  • PLEASE HELP!!!! Java 7 Update - Can someone help me how to fix this?

    I'm trying to help my colleagues who are using Apple computers and we have a site that needs to be accessed. However, when they have upgraded Java to version 7, they are being prompted whenever they try to launch the site. Below is the message they get:
    ERSInstaller failed. ensureDirectory error.
    ensureDirectory error. Directory(/Users/JohnSmith1/IBMERS/G2.0 Expense Reporting/ can not be created
    Thanks so helping!

    Talk to your email provider. The error message is from them.

  • When I try to load an image from the scanner, or from a file, into a bank deposit script, I get a message - "Error Java heap space". Need help to diagnose and fix this problem.

    I am running a script from my banking facility which asks me to load an image of the front and back of the check. I never had a problem before, but this time when I try to load the images either directly from the scanner, or from previously saved jpg files I get an error window message that says - Error Java heap space,
    Ed Marcato

    I am running a script from my banking facility which asks me to load an image of the front and back of the check. I never had a problem before, but this time when I try to load the images either directly from the scanner, or from previously saved jpg files I get an error window message that says - Error Java heap space,
    Ed Marcato

Maybe you are looking for

  • Can I copy an iPad email message to a folder?

    In "Mail" on my home computer, I can copy messages to a local (on this MAC) folder, which leaves them intact in the Inbox on the IMAP server, so that I can "see them" in the inbox when I am at my office computer. The folders on my home and office com

  • How to use sharepoint online lists in different subsites as a datasource to powerpivot

    My customer has sharepoint online + project online. As you might know each project has a site, and in each site there are lists with the same name on each site. We need a pivot table where we can aggregate all that list data, is this possible? Do I n

  • Problem in concurrent access of a single method

    Hi, I have one servlet named "Controllerservlet.java" and a jsp page "Inward jsp". Now from this jsp user enters data which are being passed to controller servlet 's "insertData" method which is a synchronized method then it stores the query result i

  • Photoshop cursor show up as a BIG BLACK BOX?!! - HELP CS3

    I'm not sure what happened, but when I select ANY tool other than the 'move tool' my cursor shows up a a solid black box of varying sizes. The move tool shows up correctly but any other tool shows up a a large solid square. If I hold the command, the

  • Flash Transparency Issue

    I am working on a site and it's home page is done all in flash. From that main flash piece there is a button that once clicked should load an external swf that contains a video clip. That external swf has the transparency turned on. The external swf