I need help on organizing some albums

So, I have about 8 different albums that are basically comprised of several songs and each are from a different artist. I would normally put the original name under the Artist field, and then put the label name under Album Artist so they would all be grouped into the same album and would show up in order under the Albums pane. But when I go to artists, and I would like to see songs by individual artists, it doesn't recognizes the artists and instead they appear under the name of the album artist. I need help with keeping all the songs in their albums by album artist in the albums pane, but for the individual songs to appear under their individual artists when i go to the artists pane.
These are several of the albums and you can see they are organized by one album artist and within them, there are several artists.
But under artist, it still appears as the album artist, but I want the songs to appear by the real artists.

See Grouping tracks into albums for general guidance. Seleting the Songs view and then unticking the View > Column Browser > Use Album Artists setting may help.
tt2

Similar Messages

I need help buying iPhoto photo album.

I need help buying iPhoto photo album. iPhoto was built in to my iMac. I am supposed to be able to make picture albums using my photos. It won't let me purchase the photo album i just made. I can't find any kind of help anywhere. Please help

If you have iPhoto '08 or older it is no longer supported for print products
If you have iPhoto '09 or '11 reboot, launch iphoto and
Before ordering your book preview it using this method - http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference - the delivered book will match it.
If the preview s good and you can not order boot into safe mode, preview again and order
LN

TS1389 Needing help, I purchased some apps, and music, using my computer iTunes, and now I am having problems installing, it says that I computer is not authorised, but I've authorised it many times, a window keeps popping up saying I need to authorise. P

Needing help authorizing my computer to install my purchases, I tried the >store,> authorise this computer.
When I try to install a window pops up saying I need to authorise it

Hello dizzy bizzy,
Thank you for providing the details of the issue you are experiencing with purchases from the iTunes Store. I recommend following the steps in the following article:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/ts1389
Thank you for using Apple Support Communities.
Best,
Sheila M.

NEED HELP BADLY ON SOME FUNNY ERROR

"This installation package could not be opened. Verify that the package exits and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer package"
I NEED HELP! I TRY TO INSTALL BUT CANT! what happen anyone noe? can anyone pls help me out with this problem? this is what happen when i try to open the file and install. it just cant open and it will show me that msg on top

Here is an article from the apple support website that might help out.
http://support.apple.com/kb/HT1926?viewlocale=en_US

I need help with creating some formulas

I'm not sure if anyone around here can help me, but I'm trying to create a Numbers document and need some help with creating a formula/function.
I have a column of amounts and I would like to create a formula which deducts a percentage (11.9%) and puts the result in another column.
If anyone can help me, it would be greatly appreciated.

Here is an example that shows one way to do this:
The original data is in column A. In column B we will store formulas to adjust the amounts:
1) select the cell where you want to formula (in this case cell B2)
2) Type the "=" (equal sign):
3) click cell A2:
4) now type the rest of the formula which is: "*(100-11.9)/100" that is asterisk, then open parenthesis, 100 minus eleven point nine close parenthesis forward slash one hundred
The Asterisk is the multiply operator (times) and the forward slash is the division operator (divide)
now hit return. select cell B2 and hover the cursor over the bottom edge of the cell:
drag the little yellow dot down to "fill" the formula down as needed.

Need help to find some mumbers.

I have a class where I enter some information 5 times.
Name, and a number.
So I have 5 names and 5 numbers related to thoses names.
I need to find the biggest number and display the name, how I would implement that?
can someone help me here.

> I have a class where I enter some information 5
times.
Name, and a number.
So I have 5 names and 5 numbers related to thoses
names.
I need to find the biggest number and display the
name, how I would implement that?
can someone help me here.
Sure.
First create an object called Person [1] which has a name (String) and a number (int or double). Then create an array of those Person objects [2] and use a for-statement [3] to fill the array. Within that for-statement, you will let the user enter some input [4]. From the input you will create a Person object and store it in the array.
When the array is filled, loop through the array (using the for statement again) to see which has the biggest number.
Good luck.
[1] Lesson: Object-Oriented Programming Concepts
[2] Creating and Using Arrays
[3] The for Statement
[4] Read user input directly from the command line

I NEED HELP! IPOD AND ALBUM ARTWORK ISSUES

I can use the music store and surf the internet fine. BUT, I try to use the ministore and with the new itunes, update mmy ipod and download album artowrk, it says itunes cannot connect, please make sure my connection is active. I tried the network diagnostics and it said network failed, but in the report, it says it connected to the music store. I dont understand, this shouldnt be because I can use the music store no problem. What is odd is on my other accounts on the computer, this issue doesnt exist. I dont recall changing any settings. Can someone help please?

You can get album artwork from various other sources as well as Amazon. You can even locate artwork using Google image search by using the artist or album name. I find this site is a good source of artwork: CD/Album Cover Art Search from SlothRadio.
Locate the album from any of those sources, right click on the image and save it to the desktop, once it's there drag it to the iTunes artwork pane. Once you've added the artwork you can either delete the original file or keep it in a folder somewhere in case you need to use it again. Alternatively there are programs like these that help locate artwork: iTunes Art Importer or MP3 Tag

Need help showing singles and albums after searching for them In I Tunes 11 Win 7

Just got I tunes 11 iusing Win 7 and when I add songs and search for them in the upper right hand corner the album or the song appears. NowI need to view the single so I can add info. But I cannot figure out where to click to jump to that single shown in the main display or the album shown in the main display window. Can somebody please help me? What to you click on? Thanks in advance. Also where are your playlists?

I wanted to bring closure to this unanswered thread. I came to realize that I put way too much into that post (information overload) and couldn't possibly expect for anyone to take on such a compilation of driver issues all at once. I later put each issue into separate threads and then got the help I needed. I learned how to find out what the Hardware ID was for each one and got the appropriate software driver to match.
Kudos go to Jerry_Lippey who helped me out in so many ways plus gave me the link to a page where I learned how do do this myself.
That can be seen here: How to identify an unknown device (e.g. Wireless LAN module)?
And, you can look up Hardware ID's here: PCI Vendor and Device Lists
I hope this helps someone in the future who is the same boat that I was once in.

Need help to change some code

Hi Experts,
I am new to Java and i struck up in some java code. could some one modify the code according to my requirement please..
we hava a booking form contains the details like Destination ware house no, load number,PO number, line number.... When the supplier submit the form,Here we should reject the booking form .
The booking form should reject in some cases where i have mentioned below. accordingly could some one modify the java code please..
We have to reject such a booking form through the logic
If Destination Warehouse = Different AND Load number = Common then
“Reject the booking form”
Else if
Destination Warehouse = Different AND Load number = Different then
"Pass the Booking form"
Else If
If Destination Warehouse = Common AND (Load number = Common OR Load number = Different)
“Pass the booking form”
Else
it should Reject the form for different site on same load.
The java code has been written like this. could someone modify it according to my requirement as i am new to Beginner to Java
String[] vendor = new String[status.length];
String[] load = new String[status.length]; //array of load numbers
String[] site = new String[status.length]; // array of site (dest wh) numbers
String[] temp = new String[20];
String[] lstatus = status;
String[] fail_loads = new String[status.length];
String[] fail_sites = new String[status.length];
MappingTrace trace = container.getTrace();
trace.addInfo("No. of records: " + status.length);
for(int i=0;i<status.length;i++){
result.addValue(status);
try{
if (status.length != 1) {
//Split input into Load Number and Vendor Number
for (int i = 0; i < status.length; i++) {
temp = status[i].split(":");
load[i] = temp[1];
site[i] = temp[5];
if (temp[2].equals("9999999999")) vendor[i] = null;
else vendor[i] = temp[2];
temp = null;
//Get Loads with two or more vendors
String p_vendor = vendor[0];
String p_load = load[0];
String p_site = site[0];
int idx = 0;
int idxs = 0;
trace.addInfo("Load Length: " + load.length);
for (int i = 1; i < load.length; i++) {
if (vendor[i] != null) {
if (p_vendor != null && load[i].equals(p_load) && !load[i].equals("00")) { //same load as previous
if (!vendor[i].equals(p_vendor)) { //second vendor in same load
fail_loads[idx] = load[i];
idx = idx + 1;
if (!site[i].equals(p_site)) { //second site in same load
fail_sites[idxs] = load[i];
idxs = idxs + 1;
p_load = load[i];
p_vendor = vendor[i];
p_site = site[i];
trace.addInfo("For Loop 2: Index: " + i);
trace.addInfo("fail Loads length: " + fail_loads.length);
trace.addInfo("fail Sites length: " + fail_sites.length);
//Set values in array Status[]
for (int i = 0; i < status.length; i++) {
for (int j = 0; j < fail_loads.length; j++)
if (load[i].equals(fail_loads[j])) {
//set status[i] to fail
trace.addInfo("status[" + i + "] = " + status[i]);
String msg = "fail" + status[i].substring(4);
if (msg.length() <= 30)
msg += ":999";
status[i] = msg;
trace.addInfo("status[" + i + "] = " + status[i]);
break;
for (int j = 0; j < fail_sites.length; j++)
if (load[i].equals(fail_sites[j])) {
//set status[i] to fail
trace.addInfo("status[" + i + "] = " + status[i]);
String msg = "fail" + status[i].substring(4);
if (msg.length() <= 30)
msg += ":998";
status[i] = msg;
trace.addInfo("status[" + i + "] = " + status[i]);
break;
result.addValue(status[i]);
}// end for i
}//endif
else
result.addValue(status[0]);
}//end try
catch (Exception e)
StringWriter stringWritter = new StringWriter();
PrintWriter printWritter = new PrintWriter(stringWritter, true);
e.printStackTrace(printWritter);
String error = "Exception: "
+ stringWritter.toString();
trace.addInfo("This is exception: " + e.getStackTrace());
Thanks,
Suesh

990094 wrote:
I am new to Java and i struck up in some java code. could some one modify the code according to my requirement please..No. Ask for help so YOU can change it and learn from it, don't flat out ask other people to do it for you. People will just assume you'll be the one flipping their burgers in the future if you do that.
new to JavaThere is a forum that has this exact name, I suggest you take your further questions (not requests to outsource work) there.

My startup disk is full. I need help clearing up some space.

It says 12.6 GB of movies; I don't know where these movies are. I don't have any downloaded. How can I find them to delete them?
I have also deleted all of my photos except three and it still says 11.44 GB. That docen't seem right either.
When I search my computer, files in Dropbox come up. But I thought those weren't included in my computer? (There are no movies on there, either.)
Sorry for the multiple parts of a question. I can't even download an update.

For information about the Other category in the Storage display, see this support article. If the Storage display seems to be inaccurate, try rebuilding the Spotlight index.
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
Do the same in other applications, such as Aperture, that have an internal Trash feature. Then restart the computer. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation—not the mythical 10%, 15%, or any other percentage. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
See this support article for some simple ways to free up storage space.
You can more effectively use a tool such as OmniDiskSweeper (ODS) or GrandPerspective (GP) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one. Note that ODS only works with OS X 10.8 or later. If you're running an older OS version, use GP.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS or GP can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
Install the app you downloaded in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the corresponding line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
sudo /Applications/GrandPerspective.app/Contents/MacOS/GrandPerspective
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Ignore any other messages that appear in the Terminal window.
The application window will open, eventually showing all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.
I don't recommend that you make a habit of doing this. Don't delete anything as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with the app, quit it and also quit Terminal.

Need help in deleting photo album...please

I transeferred a photo album to my idop nano directly from windows without using Adobe Photoshop or any Adobe program..and i cant delete the photo album because the iPhoto menu does not show on my iTunes...?

Double click the iPod on the desktop and delete the folder you put on there.

I need help finding an artist/album

I was just on iTunes yesterday and I listened to a song or two by an artist that I can't remember now. It was a female artist that had sort of a folk/jazz blend (one of the reviews actually mentioned this exact mix of styles) and it featured the artist on the cover standing outside among some leaves with a fall/winter coat on.
I think it is a fairly recent release, and I want to say her first name was something like Stephanie, but I did a search and came up with zilch.
Any ideas out there?

Thanks for the try, but I was just slogging through the other "New Releases" on the Jazz page, and saw on one of the artists "other listeners also bought" portion, the name, Sara Gazarek!
That was what I was looking for; so thanks, but found it myself!

I would need help with the following please: I need to save some of my email on a disk. I was going to Print, then Save PDF but then I am stuck. Help please. Thanks. Elisabeth

I would need help with saving some eamil messages to a disk to unclutter my email. How can I do this please?
Thanks.
Elisabeth

Open the email and then from the File menu select Save As Rich Text Format. That'll save it to open in TextEdit. If you want a pdf then open the email and do command-p (Print) and then from the PDF drop down box lower left corner select Save as PDF.

Firefox will not update plugins labeled in red as "potentially vulnerable plugins". Need help.

Firefox will not update three plugins appearing below the
statement in red : " vulnerable plugins". I tried three times, and
all I got was other pages with lots of ads. I need help. Thanks.

Some plugins may need to be removed using the Control Panel, or Windows Explorer, because they are managed by other software or dropped in nonstandard folders. Can you list the three plugins so people can give specific advice on them?
For the RealPlayer Browser Record Plugin you might need to update RealPlayer or use its options dialog to turn off the recording/downloading feature in order to remove this one.

I need help creat

I install windows vista in my computer and conect my zen micro 5gb and dont work beacause is not compatible, my language is spanish i need help driver or some to fixed my problem thank you atte. jose campoy (my country is spain)

ok well i remeberin reading somewhere that the firmware needs upgraded to work with vista but it need to be done in a xp machine maybe try these forums over here http://forums.creative.com/creativel...d?board.id=dap

I need help on organizing some albums

Similar Messages

Maybe you are looking for