I need help on steps on working and building chat applet

is there a site where you can get some codes on building java chat applet?
whats the easiest thing to do on making a chat server?

java.sun.com has one.
Check out the client and server source here:
http://developer.java.sun.com/developer/technicalArticl
s/InnerWorkings/Burrowing/SimpleChatApplet.java
http://developer.java.sun.com/developer/technicalArticl
s/InnerWorkings/Burrowing/SimpleChatServer.java
Enjoy.
~Markhi mark! i'm sorry for the silly question i'm asking...
i have compiled the two source code u suggest, but...
i don't know what to do with them. i put the code of
applet in a html, and i run the server on port 6006.
do u need a web server? i've tryed to load
http://localhost/chat.html and i see the page but also
the error of communication.. so i put the :6006 but
i have the error page... what do i need? help, please..
thanks

Similar Messages

TS4268 I need help getting my face time and imessage to work.

I need help getting my face time and imessage to work. It is saying wating for activation. I just got my iphone 5 2 days ago. I have reset it from the phone and from itunes on the computer, made sure I'm attached to wifi.

The 3 basic troubleshooting steps are these in order: 1. Restart your iphone 2. Reset your settings/iphone 3. Restore your iphone. Since your iphone is only a couple of days old, you should backup your device before restoring. If you don't have anything on your iphone that you care to lose, then simply restoring without a backup is fine. A quick reset of pressing the sleep/wake button (top of iphone) and your home button simultaneously and holding it until the silver Apple logo appears.

I need help integrating Microsoft Office, Outlook and Calendar with my job and is it possible

Ok guys I am new to the iphone 4s. I just dumped my Blackberry after 10 years. I need help integrating Microsoft Office, Outlook and Calendar with my job and is it possible? Also I need it to automatically push email and appointments to my phone? I will buy any app just need to know which is best for work environment. Here is what I am thinking about doing. http://www.groovypost.com/howto/apple/sync-iphone-or-ipod-touch-calendar-and-con tacts-with-google/ Is this the best way? For personal use I am using paid G whiz app

I use Google Calendar Sync to sync my work Outlook calendar to a gmail account, then sync that to my iPhone. It works well for me for the past couple of years.
As far as mail itself, just ask your it folks for settings for remote access to your exchange account, and then set it up on the phone.
As far as working with Office docs, to be able to actually edit them and such, look in the app store for DocsToGo or QuickOffice - they both are good but each has it's pros and cons, so on balance it's down to mere preference i think.

Need help with my iPhone 5 and my Macbook Pro.

Need help with my iPhone 5 and my Macbook Pro. I was purchased some music on itunes at my mac. Some reason I deleted those music from both on Mac and iPhone 5. Today, I went to my iPhone iTunes store inside of iCloud to redownload my puchased. But those song won't able to sync back to my iTunes library on my Mac. Can anyone help me with that ??....
iPhone 5, iOS 6.0.1

You've posted to the iTunes Match forum, which your question does not appear to be related to. You'll get better support responses by posting to either the iTunes for Mac or iTunes for Windows forum. Which ever is more appropriate for your situation.

I am john and I need help downloading a progmmme yesterday and wanted to finish downloading open it and I am not told me that the program was shut down unexpectedly and restart ponia not opened and went back to download it and not opened my back probe to

i am john and I need help downloading a progmmme yesterday and wanted to finish downloading open it and I am not told me that the program was shut down unexpectedly and restart ponia not opened and went back to download it and not opened my back probe to turn off the computer and there was no case

i am john and I need your help yesterday bought a program called DJAY when I finish the download and got an error opened and I saw him there was no case to install and thank you for your help anyway

I need help i lost my ipod and found it but someone elses id is on it i trtied resoring it but i still cant go in it help

i need help i lost my ipod and found it but someone elses id is on it i trtied resoring it but i still cant go in it help

See this -> Find My iPhone Activation Lock: Removing a device from a previous owner’s account

Need help moving my cs5 illustrator and photoshop to my new computer

I need help installing my cs5 illustrator and photoshop on my new computer

I have a macbook air...not sure what operating system....
Kelsey West
Kelsey West Designs
[email protected]
818.631.0172
[image:
http://www.hmcatering.com/wp-content/uploads/2013/03/AsSeenOnSMP_Blue.png][image:
http://tobinphotography.com/wp-content/uploads/2013/02/Style_me_pretty_blog_badge.png]

HT201441 Need help here, a friend died and the family of his gave his ipad to us for our kids. I hooked it up to the computer and reset the ipad and it wont work again because it has find my iPad/iphone .

Need help here, a friend died from mesothelioma and his family gave his ipad to us for our children. I reset the ipad in iTunes on the computer and it has find my iPhone on it , now the ipad dont start or boot up again. How do I get for that because I am not able to get a hold of him obviously?

Just had an employee terminated most acrimoniously and had an iPhone 5C that was a brick. Apple support can help remove the lock. Better hold onto your original receipt and record the Serial# ! I do not mean the MEID or IMEI but the Serial# found on the original box or Settings>General>About. In my case no receipt or Serial#. 2 hours on the phone between Apple and Verizon and got what was needed. Submitted form and got reply to allow 2-10 business days.
Here is the form I had to complete and sent to [email protected]..
ORIGINAL SALES INFORMATION:
PRODUCT PURCHASE DATE:
INVOICE/RECEIPT NUMBER:
PRODUCT SERIAL NUMBER:
PRODUCT IMEI/MEID:
PRODUCT DESCRIPTION:
BUSINESS/INSTITUTION NAME:
REQUESTOR NAME/TITLE:
PHONE NUMBER:
STREET ADDRESS:
CITY:
STATE:
POSTAL CODE:
EMAIL ADDRESS:
UNLOCK AUTHORIZATION STATEMENT: I [YOUR NAME] representing
[BUSINESS/INSTITUTION NAME] authorize Apple, Inc. to unlock the devices listed.
Best regards,
The Apple Support Team

I need help to convert hours,minutes and seconds to seconds.

Hi, I need help with the code on how to convert the hours,minutes and seconds to seconds. I don't know which formula to use so that I can get the results in total number of seconds. Thanks.

Jos ("when in doubt: parenthesize correctly")Bracist.You're more right than you'd known: last week I climbed over a safety
fence (which I wasn't supposed to do of course) to adjust the position
of an optical measurement device we installed in a huge production
machine in a factory. I stepped on some sort of hose; the end of that
hose broke loose and hit me straight in the middle of my lower jaw. My
front teeth feel wiggly now and my molars on the left of my lower jaw are
not what they used to be. This Wednesday I get that all fixed at some
dental clinic. Keep your fingers crossed because me+dentists == war.
My tongue continuously keeps on reporting craters and disaster ;-)
Jos, how's it going? Besides a possible loss of some teeth, I'm fine ;-)
My Spring/Hibernate journey continues. I'm trying out Hibernate 3.2
annotations and the Ant tools. So far, so good.Good to hear. At the moment I'm putting my teeth (sic) in that darn snmp
stuff which simply refuses to work the way I want it and besides that I'm
heavily involved in some of that SAP stuff. Spring is not in the vicinity for
me in the next couple of months sadly enough.
kind regards,
Jos

Need Help with External Hard drives and too much music

I am not terribly tech-savvy, and I need your help. I have a G5 PPC dual processor with an internal 250GB drive. I have two seagate firewire/USB2 external hard drives. One is 250GB and one is 350GB. I want to know how to use them to get my Mac to run faster and better.
My original hard drive is 7GB shy of being full. Almost half of this is my itunes library which is over 100GB. The older (250GB) hard drive has about 150GB of photos/videos.
My Mac is running slow as molasses and when I power up the external hard drives it slows down to what I recall my original Mac Plus ran like.
I use the G5 primarily to work with photos, illustrations and creating the occasional DVD with video and photos. the apps I use most often are Photoshop, Illustrator and Painter. I always listen to music while work.
I hope all of this information is helpful! Here is my question:
What is the best way for me to set up and use these external hard drives to return my G5 to its original blazing (to me) fast speed?
PPC G5 Mac OS X (10.4.9)

I think you should look at adding two 500GB internal drives. I'd say Maxtor MaxLine Pro for cost, but they also run much warmer (43ºC even when nearly doing zilch) so I'd go with WD RE2 500GB for $40 ea. more.
dump whatever you don't need, trash anything that is hogging space and is just temp file or useless cache. Web browsers can leave behind a ton of small files eating up tens of MBs.
Use SuperDuper to backup/clone your drive.
Disk Warrior 4 to repair (after it gets to 15% free, or just forget for now).
A 250GB drive formats to 240GB and you have ~3% free it looks like.
For every data drive plan to have two backup drives.
Keep your boot drive to 40% used.
And your data drive to 60%.
Backups can go a little higher.
Drives are cheap and inexpensive, especially for the space and performance. And they have improved SATA over the years it has been out.
By doing a backup followed by erasing your drive, and then restoring it, using SuperDuper, which optimizes the organization, skips copying temp files that aren't needed, it also defragments your files. I would do backup daily to different sets that you "rotate." And before any OS update. And do the erase and restore probably every 2 months.
Make sure you keep one drive partition somewhere that is just your disk utility emergency boot drive that is not a copy of working system, used for doing repairs like running Disk Warrior and Disk Utility.
You may need to repair; backup; even erase and restore your external drives. Rather than spend on vendor made case, just pick up a good FireWire case either with drive, or bare (and add your own). I think it'd add 500GB FW drive though.
Why?
To begin backup of your current drive. To leave your other FW drives "as is" for now.
Then install a new internal 500GB drive as well so you now have a good current backup, and you have moved your data off 250GB to 500GB. If anything happens, you have one off line FW backup.
Then begin to clean up, organize, and get your FW drives working. It sure sounds like they have had some directory or file problems.
You can find a lot of Firewire and SATA drive choices over at OWC:
http://www.macsales.com/firewire/

Need help setting up my work email

I'm new to Blackberry and need help with setting up my device to receive my work email (we use Outlook). They use BES but since I purchased my Verizon Blackberry on my own, my workplace IT department will not assist me in setting it up. Since the desktop redirector does not allow me to get attachments, that is pretty much not a great option.
We can obtain email through Outlook Web Access, so I tried setting it up through BIS based on other postings. I've tried every combination of user/mailbox names, with and without the full domain name attached, but still getting the error, "A connection could not be established..." I don't believe we have Microsoft Internet Security and Acceleration Server (no /CookieAuth.dll added to web address). On the Web Access log-in page, I do have to select a domain from a drop-down menu, if that somehow plays a role in how I configure things??
Tried setting up a forwarding rule in Outlook, but it seems annoying that all the emails received from the device are from ME, and makes replying a bit painful.
Any suggestions would be great.
Thanks!

you can try integrating using POP or IMAP access if available.
and chk this fot typicak OWA integration issues:
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB02858
Click on KUDOS to appreciate our efforts and mark the thread RESOLVED if your issue is resolved.

I need help with my text tone and I have ring tone. no text tone for the 4s.

I need help with my text tone. I have ring tone no text tone. I have a 4s.

Hi Sarar2333! Let's get your text tones working again!
Here's a link with instructions how to enable and change your alert sounds for your text/notification settings on your iPhone 4S: http://vz.to/1stiF8a. You can ensure text tones are enabled by selecting a tone in the "Text Tone" setting. Let me know how that works out for you. Thanks!
AnthonyTa_VZW
Follow us on Twitter @VZWSupport

Need help with ext. SWF and XML

I'm trying to create an External SWF to load into my main
site (photography).
Home | Portfolio | Published Work | Bio | Contact
The SWF I want to load externally is Portfolio because it has
5 sections
Those 5 sections are:
-Editorial
-Adventure
-Fly Fishing
-Multimedia
-Weddings
I'm looking to keep this dynamic as possible, but I'm one of
those guys who doesn't write code from scratch, but knows AS well
enough to modify a base or a generic template if ever given. It
would be easier to use one subsection as an example, which could be
applied to all others.
e.g. "Fly Fishing" 1-Main container; 5-10 thumbnails (1
dyanamic thumbnailcontainer)
- I don't know XML (but can modify it). basically having an
ID tag for each image, possibly dynamically generate a thumbnail
too. Also have a spot for dynamic text to load in (captions with
multiple text lines for images upon onRelease - maybe this could be
it's own MC that loads on top of the main photo container)
- on (release) on a thumbnail: there would be a little
information icon that would appear. If you mouse over, it would
overlay a layer over that specific ID photo, and the text appear.
RollOut it would fade out the layer above that specific ID photo.
- Transition: FadeOut/Blur/Exposure Blur, something
interesting to that nature.
- Thumbnails: is it just easier to create thumbnail images
manually, and just create a separate container?
- Image folders: I would imagine each section would have
it's own watch folder. For example "Fly Fishing" would be a folder
"/swfImg_flyFishing/", but perhaps having one XML file.
- XML file details
id
location
caption summary
title
As you can see, if I had one template to build off of, I
could repeat it self for the others. I need help and if there is a
flash component (free or purchase) that does at least 70% of what I
need, please share information. thank you!Portfolio

I know doing a pushback to the client requires Flex Data
Services, but since I don't use FDS I can't tell you exactly how.
But look in the documentation about "pushing" data to the client.
Once you've figured out how to do that, you can trigger that push
once you've finished editing the xml file. You may want to ask over
in the FDS forum.

I need help trying to print ,move and resize multiple images on a page to print!help!

can anyone give me to some advice. I was using an older version of photoshop elements where i could position the image i wanted to print on the page. I could resize it, move it around and add more photo's. I print small images that I cut out for jewelry making and need to be able to add 12 small images to a 4x6 print size page. My new elements is not allowing me to do that! I'm frustrated and need help!! thanks!

It should work just the same as before: create a blank document, place your images on it, then print it. The only difference is that you can't change the position of the image in the print window anymore.

I need help understanding how this works. AS 2.0

Its my first time here and i only started learning flash today. I aint too great with maths and i was showed this piece of code that makes a triangles point follow the cursor. It involved mathimatical things ( which i aint so great at) and the guy said "You dont need to know how it works, just how to use it." well i copied his code and it worked, but i have no idea how to use it in other rotation apart from the one he taught us. I dont even understand how to redo his code i saved it to a word document and anytime i wanted to make something rotate something in that fashion i would refer to that. But i dont want to have to do that, i want to know how to use it, dont have to understand it, but use it for other rotation matters. If you are going to help, please try to be a bit simmple i explaining it, cause im new. Dont get me wrong i aint thick but i can find it a bit hard to follow some things, that is i my current problem.
here is the rotation code:
onEnterFrame = function()
hero._rotation = getmouse(hero);
getmouse = function(mc:MovieClip):Number
dy = _ymouse-mc._y;
dx = _xmouse-mc._x;
rad = Math.atan2(dy,dx);
rotate = rad*180/Math.PI
return rotate+90
also if it helps, here is the video i was watching: http://www.youtube.com/watch?v=w3OfrpbNhHs
please if you can, explain how the entire thing works.
thanks for any help given in advance.

Hi,
Here's a short primer. It may not be sufficient but here goes.
1st, move the closing bracket at the end and put it on the third line. This makes the code more efficient
onEnterFrame = function(){                               // this causes Flash to repeatedly
                                                                          execute the next line at the
                                                                          frame rate you selected
                                                                          for your document
       hero._rotation = getmouse(hero);               // this tells Flash to rotate a
                                                                          movie clip (named hero) based
                                                                          on the function getmouse()
};                                                                     // putting the }; here makes the
                                                                          code more efficient and readable
getmouse = function(mc:MovieClip):Number{   // This is the function called with
                                                                         mc referring to hero that was
                                                                         passed from the second line.
     dy = _ymouse-mc._y;                                // dy means delta y which subtracts
                                                                        the y position of the movieclip
                                                                        from the mouses y position
     dx = _xmouse-mc._x;                               // dx = delta x (same as above line
                                                                        but on the x axis)
                                                                     // once you have the x and y sides
                                                                        you male a triangle.
                                                                        Now use trig to find the angle
     rad = Math.atan2(dy,dx);                           // the computer works in radians
                                                                        the arc tangent atan2 will give the
                                                                        angle in radians
     rotate = rad*180/Math.PI                            // you want to convert the radians to
                                                                        degrees, that's what this line does
     return rotate+90                                         // this returns the value of rotate back
                                                                        to the calling function in line 2.
                                                                        the +90 determines which part
                                                                    // of the hero movie clip is facing the
                                                                       mouse.
If you put the mouse cursor over any of the green reserved words above in the Actions panel you will get a desctription of what these do.
hope that helps.

I need help on steps on working and building chat applet

Similar Messages

Maybe you are looking for