I need help on the Sound Blaster Audig

I just got the sound Blaster Audigy 4 and installed it on a Dell computer. The receiver that comes with the card worked fine with the media center the first time it is installed but after that the red LED light comes on instead of blinking when the remote control is used. I tried to re-intalled the driver of the card which took a lot of time but did not fix the problem. Would somebody please tell me what the problem is with the receiver and what should I do the address the problem?

I would suggest uninstalling the SB drivers in Add/Remove program then run the SB installation again.
Dell XPS 600 Intel Pent D 830 3.0ghz
Chipset- Nvidia nForce4 SLI Intel Edition
WD 60gb HD
2gb Ram
DVD-ROM
DVD-RW (Plextor 760A)
Creative XF-I Extreme Music
Logitech X-540 speakers
EVGA 7950GT
Dell 2007WFP (I-SPS panel)
Win XP SP2
BIOS A

Similar Messages

I need help with the sound on my computer.

I know this question isnt apple related but when I go to websites with video I can watch the video but the sound doesn't work. I have been all over the internet and this was the best place I could think of to get information. Someone please help me.

Hi Emily
A few people here may be able to answer your question.
Have you tried posting your question at Yahoo Answers? http://answers.yahoo.com/
Or start a discussion at Google Groups http://groups.google.com/
You would also need to post more information on the subject, such as computer type, operating system, processor speed, amount of installed RAM , web browser that you are using. Also mention if you have Adobe Flash player, Adobe Shockwave player, Apple Quicktime Player or any other media player.
Hope this helps in your search
J.C
Message was edited by: J.C

Need help get the sound timed to the picture

Photoshop elements 12. On a PC. How do you get the sound to time with the picture when you are trying to edit it?

That makes more sense. I wish could help specifically, but I use another NLE video application.
Was the audio recorded separately or at the same time as the video? If the latter, I'm pretty sure Premiere should lock the audio event with the video as you move it. (At least most NLEs do.)

I have a macbook pro 1175 its a 2006 model which boot camp will work i tried 4.03 but it says this boot camp is not for this machine thats the oldest one i found here please help i have windows 7 32 bit installed but need drivers for the sound

i have a 2006 mackbook pro running windows 7 32 bit i need drivers for the sound and the earliest bootcamp on here is 4.03 my machine says its not for this system please help which version of boot camp can i use

Read this. You need to be running Snow Leopard or later.
http://support.apple.com/kb/ht3986

Linux and the Sound Blaster Live

Ive got my hands on a SB Li've 24bit external sound card and after some fiddling around I seem to only have standard stereo and no 5. Audio.
My question is has anyone got these things to output 5. on Linux yet.
I'm going to have to return it back to the distributor as I seem to be miss informed that it would work in Linux.
Im getting this feeling that most Creative stuff is not "Linux friendly" and may not recommend their wares in future,
Looks like its time to start a Linux Audio device company, 40 million users is a nice market.

Hello,
Please bear with me as I'm a complete novice on this.....
I have the laptop, and whist re-decorating the room, I have?run?6 cables (sub woofer to be at the?rear of the room) to a wall mounted connector plate. So I think I need the following;
. Software to convert the sound within my laptop to 5. format (if not already done) and to get it to a USB. Installed sound card should be capable of this.
2. USB?cable from PC to ?The Sound Blaster? Li've!? 24-bit External?
3. The Sound Blaster? Li've!? 24-bit External?
4. Maybe someting else to amplify and distribute the audio
5. 6 short leads to my wall mounted connector plate
6. Speakers
Not sure if the aboe helps?and perhaps there's another way of doing it instead of using the?Sound Blaster? Li've!? 24-bit External?
Many thanks

Major Issues with Windows XP and Sound Blaster Audig

As mentioned in the post title, I'm using a Sound Blaster Audigy 4 card (recently purchased) and am having issues with Windows XP apparently because of it. When the card is physically installed, but the drivers are not, there are no problems. However, when the drivers are installed, Windows XP's "explorer.exe" crashes on boot, locking up the start menu and any other open windows. Now, I can manually end the explorer.exe application and then reboot it, and things will work... however, I cannot imagine that that is the intended functionality of this card. Additionally, I suspect the card in the failure of a game (Eve Online) but I would assume the issues are related. I've already narrowed the issue down to the Sound Blaster drivers. I've tried booting with the SB drivers but without the video card drivers, and the problem recurred. Every time I boot with the SB drivers installed, it fails. Without them, things seem to run normally. If it helps, I'm using an Intel Core 2 Duo E6400 processor, with GB of DDR800 RAM. I've installed Windows Service Pack 2 and all the other updates. The video card is a Geforce 7950 GT, with the latest NVidia Forceware (93.7) drivers. I've had this problem with both the Audigy drivers on the CD that came with the card and the newest ones downloaded from this website. My motherboard is a Gigabyte GA-965P-DS3, which includes onboard sound hardware, but I have disabled it at the BIOS level. I can provide dxdiag information or anything like that if necessary. Does anyone have any advice, suggestions, or have you encountered a similar problem?Message Edited by DerekKatz on 2-04-200603:2 AM

Thanks for the helpful reply Dan
I ran the file, CTZAPXX.exe, like suggested, and it ran without a problem. It installed the files and even required me to reboot my computer!!
However, after a computer restart, I am still in the same boat. Codecs are installed, but the location of the device is "unknown". In Device manager, there are no unknown devices; it shows the codecs in the sound tab, but no actual hardware; as if my sound card does not exist.
I use my computer for music, and my buddy needs me tomorrow night to play some music stored on my computer. I really do appreciate the help I am offered. I do not mean to sound impatient, but I really need this device fixed, or I will have to have him buy me a sound card....

Will the Sound Blaster X-Fi Work with Sony Viao Laptop?

7Will the Sound Blaster X-Fi Work with Sony Viao Laptop?@ I have a Sony Vaio Laptop. When i purchased the laptop i did not know you could only play music through the mic on Sony Vaio. The mic and sound card are intergrated and there is no stereo mix on the Sony Vaio's.( You cannot en-able the stereo mix on Vaio's )I like to play music on a chat program called pal talk, they have music rooms. But my music sounds like crap because i have to play through the mic. I purchased this USB Sound Blaster to hopefully allow me to play through the sound blaster card. There is a lady on pal talk who plays music and talks on the mic using a Sony Vaio. She is the one that told me i needed to get a creavti've sound card to play music in the rooms. The problem is
I can't find her to ask which sound card she purchased. So i did some research and purchased the X-Fi usb card. Now the problems start. I purchased the X-Fi, turned on the?my laptop as stated?and inserted?the X-Fi?
Into the USB slot. The program asked for permission to run and i clicked yes. It download almost all the way and became stuck while installing the console, went from zero to 27% and stopped. I tryed it 8 times with the same thing happening. I went to the site and downloaded the software from there and the same thing happened. What am i doing wrong? Also when i inserted the unit in the USB slot and clicked on the speaker icon and pulled up the sound information, i see that the X-Fi mic is installed and working but i don't see the X-fi sound card? I checked every where! Also i tryed playing music in one of the music rooms and they said no sound, no sound! Is it just that this will not work with a Sony Vaio? Or am i doing something wrong? I am running vista 64 bit, 4 gig's of memory and daul core?processor and my Laptop is only months old. The laptop sound card is Reltek High Deff Audio. Any help would be great.

the usb sound blaster x fi 5.1 pro thx does come with ddl but not dts connect.
it works for games and movies using optical n get digital surround sound

Need help regarding the location of Exchange 2013 Logs for parsing

Hi, I am trying to create reports based on the logs that are created on my exchange server. I am using
exchange 2013. My problem is that I cannot handle every log, and instead want specific types of logs.
I need help finding the specific locations of the following types of logs (If they even exist), so that I can parse them and use them effectively:
Audit Logs (Mailbox logons, Mailbox permission changes, Mailbox property changes,
Exchange store changes)
Mail Report Logs (Mailbox size and growth, Mailbox storage growth, Enabled users, Expired and Soon-to-Expire Mailboxes)
Exchange Traffic Reports (Details on size and amount of messages sent and recieved, Internet traffic [to and from], Traffic between exchange users)
I understand this might sound like a huge undertaking, but any help that can be provided would be appreciated.
Again, I need information on the locations of these types of logs on the exchange server, so that I can parse them. Collecting them all and searching through them is not practical for my available resources.
Thanks,
Matt

Audit Logs (Mailbox logons, Mailbox permission
changes, Mailbox property changes, Exchange
store changes) ---- these are two type of logs, 1. mailbox audit logs and that is stored in each mailbox under dumpster
http://technet.microsoft.com/en-us/library/ff461930(v=exchg.150).aspx however you need to
enable
it for individual mailboxes... 2. admin audit log, this is stored into a system mailbox dumpster.... http://technet.microsoft.com/en-us/library/dd335052(v=exchg.141).aspx
Mail Report Logs (Mailbox size and growth, Mailbox
storage growth, Enabled users, Expired and Soon-to-Expire Mailboxes) ---- there isn't any specific log for this, you would need to create some time of script to collect this every day for you and store it somewhere... This is a good start... http://www.stevieg.org/2011/06/exchange-environment-report/
Exchange Traffic Reports (Details on size and
amount of messages sent and recieved, Internet traffic [to and from], Traffic between exchange users) ----- This you can get from message tracking log... http://technet.microsoft.com/en-us/library/bb124375(v=exchg.150).aspx

About the Sound Blaster Live!

Ok.... Can you not buy this card anymore? Cause every place i go to order they say the manufacturing is no longer supplying them or some crap. I ordered one and waited for almost 2 weeks finaly i e-mailed them and they were no longer available (from buy.com) and so other places they say it was in inventory so can you not buy the Sound Blaster Li've! 5. anymore? :'( cuz its the card i need =(

I've searched around for some options for you. Here is one that may do the trick, but it's not a simple PCI sound card. You may want to contact one of the sound card makers you are planning on purchasing from and ask them. You can contact Creative Labs from this page and they may be able to give you a better answer.
J.R. Allen

Help Please with sound blast

I recently bought a new sound card, i have inserted it and installed it. It is a Sound Blaster Audigy SE. I disabled my onboard sound already. I used the creative diagnostic because i was not recieving sound and it say something about the wave out device not working. When i went under audio and sound controls the sound audigy is list and is working properly but they say no audio device. Under the sound blaster proprities it say working properly but not started. i need to know what to do. I have windows xp service pack 2. a gateway.

raven23,
Here is a similar thread with a suggested solution.

The installation cd for the Sound Blaster creative Wireless Mu

hellocan anyone send me the installation cd for the Sound Blaster creative ?Wireless Musicmy e-mail is:
[email protected] and you can also send it to http://www.yousendit.com/?and give me the link for download fileplease your helpthank you very much

Try this thread.Message Edited by Katman on 03-22-200605:55 PM

No Sound from Sound Blaster Audig

My HP Pavillion came installed with the Sound Blaster Audigy 2 - Model # 0240 card. I've had about 2 years wth no problems. The other day the sound just stopped working. I know the speakers are set up properly since when I try to calibrate through Creative it plays those sounds but no other sounds through the computer. The Creative diagnostic tests finds the hardward but it fails the Midi, Wave and something else that I can't remember.
In Device Manager there is a yellow exclamation point before Sound Blaster 6 or AWE32. Under properties it says: This device cannot start. (Code 0). Under Resources it says: Resource Setting: This device isn't using any resources because it has a problem. That much I figured out....LOL.
I am not a computer expert but I'm pretty good at troubleshooting and nothing so far has worked. I tried removing and reinserting the sound card but to no avial. Howver, the card has two wires in the front of the card...one into AUX and the other port I cannot see what it is for but that wire is not plugged into the tower at all. Should it be? Is it possible it somehow became detached and that's why it no longer works? Could the card just be blown? I also tried a different slot when I took it out, also didn't work.
I have not installed any new hardware or software, however, my 3 year old son uses this computer and who knows what he's done.
Can anyone help me? I miss having sound!!!!!!
Thanks so much!!
Lisa
PS... I am running Windows XPMessage Edited by dknygirl on -2-2005 04:37 PM

Hi Jason,
I only have one sound card. Stamped on the card it says Sound Blaster Audigy 2 in one spot and in another spot it says Creative Audigy 2. Aren't they one in the same? In device manager it lists the following: Audio Codecs, Legacy Audio Drivers, Legacy Video Capture Devices, Media Control Devices, Sound Blaster 6 and Video Codecs. That's all that's listed under sounds.
So far I've been unable to locate the discs that came with the computer but I'm still searching.
In the meantime, do you think that wire on the sound card that isn't connected to anything in the tower could be the culprit's Is there anyway if I can find out if it should be plugged into something. I only see one place that it can fit although it has two less prong holes on the top row.
Any other suggestions? HP tells me to do a system recovery but on the chance the card is blown, that won't solve the problem.
Does anyone know what Code 0 means that is shown in the device manager?
Thanks!

I just created an iCloud email and I want to use that email for my iTunes account as well. I need help suiting the old apple I'd because I do not remember anything associated with that email and I don't know the security questions

I just created an iCloud email and I want to use that email for my iTunes account as well. I need help switching the old apple ID because I do not remember anything associated with that email and I don't know the security questions or the login for that old email.

You cannot do that. The AppleID you used to create the iCloud account is an active primary email address. The email address you created with the iCloud account is also an active primary email address (all Apple domain email address automatically become AppleIDs as well). You cannot replace the primary email address on one active AppleID with the primary email address on another, active AppleID.
You can use your iCloud email/AppleID with iTunes, but it will be a separate account, so all your previous purchases remain tied to the other AppleID you have.
I don't understand your statement that you could not remeber your old AppleID password, as you would have had to use it to create the iCloud account in the first place (the first step of creating the iCloud account required you to login with your existing AppleID and password)?

Need help with the Vibrance adjustment in Photoshop CC 2014.

Need help with the Vibrance adjustment in Photoshop CC 2014.
Anytime I select Vibrance to adjust the color of an image. The whole image turns Pink in the highlights when the slider is moved from "0" to - or + in value. Can the Vibrance tool be reset to prevent this from happening? When this happens I cn not make adjustments...just turns Pink.
Thanks,
GD

Thank you for your reply.
Yes, that does reset to “0” and the Pink does disappear.
But as soon as I move the slider +1 or -1 or higher the image turns Pink in all of the highlights again, rather than adjusting the overall color.
GD
Guy Diehl web: www.guydiehl.com | email: [email protected]

I need help with the iPad Remote app to connect to apple TV 2

I need help with the iPad Remote app to connect to apple TV 2 I have the app already on my ipad and when I open it only shows my itunes library and not the small black Apple TV 2 icon! How do i fix this and i know it's something

Get the manual at http://manuals.info.apple.com/en_US/AppleTV_SetupGuide.pdf
 Cheers, Tom

I need help on the Sound Blaster Audig

Similar Messages

Maybe you are looking for