I need help photos' resolution.

When I import photos,those photos loss resolutions.I don't why

If you are noticing a poor resolution in the viewer immediately after importing the photos this will only be temporary until the background processing has finished (I'm assuming you are running iMovie 10). Do you still see poor resolution after sharing?
Geoff.

Similar Messages

Need help, Photo appear sync in itunes but there are no photos on my ipad 2

Hi,
I need some advise, recently upgraded my itunes to iTunes 10 and at the same time I added new photos to my laptop( running on windows vista) pictures file.
I wanted to sync the photos from my laptop to my ipad, but in the end, on my itunes, it appear all photos are synced but on my ipad there are no photos at all.
Tried reinstalling iTunes, deleted the ipod photo cache and reset my ipad... and it still doesn't work!!
Any one can help??
Appreciate if only can help with this issue....

Did you restore to factory settings?new iPod via iTunes on this computer?
What happens when you try to sync?
Do the songs play in iTunes?
Do you have the right boxes checked to sync?
iTunes: Syncing media content to iOS devices and iPod
Try syncing using the manual method

Need help with resolution problem

I previously used Vista/PSE6/HP1200 laserjet to print B&W photographs on transparencies. The photographs were very high quality -- you couldn't see the pixels. My computer crashed, and now I'm using Windows 7/PSE8/the same HP1200 laserjet. No matter what I do, I cannot replicate the same high quality pictures. The pixilation remains the same (very noticeable), regardless of my efforts to change resolution. Help!

Not sure what you mean by print B&W photographs on transparencies? Perhaps you print onto acetate sheets?
Could you please give some details of the process and your current print settings?

[solved] Need help with resolution on HDTV being used as a monitor

This is a separate but sorta related problem to my previous post: https://bbs.archlinux.org/viewtopic.php?id=101770
I have a Sanyo HDTV and I'm using it as my computer Monitor. The desktop now shows up on the screen, but the position of the desktop is wrong. (tool bars are off screen) and the windows are really big.
The TV manual gives these settings for hooking up a computer:
1360x768 16:9 refresh 60hz horizontal freq: 47.71 vertical freq: 60
Thats resolution is not showing up as an option in nvidia x server settings.
I tried using xrandr to set up the TV's resolution by adding a new mode
xrandr --newmode "1360x768_60.00" 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync
xrandr --addmode default 1360x768_60.00
xrandr --output default --mode 1360x768_60.00
xrandr: Configure crtc 0 failed
It didn't work so I tried following another tutorial online and added a modeline to my xorg.cong
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder58) Thu Apr 22 20:35:23 PDT 2010
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildd@yellow) Fri Apr 9 11:51:21 UTC 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor0"
VendorName "Sanyo"
ModelName "SANYO LCD"
HorizSync 15.0 - 46.0
VertRefresh 59.0 - 61.0
Option "DPMS"
Modeline "1360x768@60" 84.50 1360 1392 1712 1744 768 783 791 807 -HSync +Vsync
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 9500 GT"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1360x768_60.00"
EndSubSection
EndSection
That did not work either and now I'm a bit lost on what to do to get my desktop to show up properly on the screen.
In windows 7 I had to use some weird settings to get it to work:
resolution: 1790x1012
DPI: 125%
Should I try using those settings?
Any help will be greatly appreciated.
Last edited by Meskarune (2010-08-12 06:47:38)

I'm having the same exact problem with my HDTV
Running latest NVIDIA 256.44-2, it keeps defaulting to 1024x768. Sometimes my monitor will display 1260x768 but nvidia-settings still only shows 1024x768 as the highest resolution.
Did you end up using 1360x768_60 or 1360x768@60?
Can you post your xorg.conf?
And what is the command to get your output of:
1360x768_60.00 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync
Here is my xorg.conf in case it helps
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 256.44 ([email protected]) Thu Jul 29 01:52:36 PDT 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "glx"
Load "record"
Load "xtrap"
Load "freetype"
Disable "dri"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
# HorizSync source: builtin, VertRefresh source: builtin
Identifier "Monitor0"
VendorName "Unknown"
ModelName "TV-0"
HorizSync 28.0 - 55.0
VertRefresh 43.0 - 72.0
Option "DPMS"
# Modeline "1360x768_60"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 7100 GS"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "TwinViewXineramaInfoOrder" "CRT-0"
#Option "DynamicTwinView" "false"
#Option "metamodes" "nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
Modes "1600x1200" "1366x768" "1360x768" "1260x768" "1024x768" "800x600"
EndSubSection
EndSection
Edit: I was able to get my resolution to 1280x768 using the xfree86 modeline generator http://xtiming.sourceforge.net/cgi-bin/xtiming.pl ( i put in 1360 but it defaults to 1280)
Last edited by ruhtranayr (2010-09-02 21:20:17)

Need help undersatnding resolution.

I exported one picture using different JPG compressions. I ended up with files ranging from 1.3MB to 127KB. I printed each as 4x5 & 8x10 to see what compression was acceptable.
I then opened each in Photoshop and was surprised to see that they all had the same number of pixels and pixels-per-inch (2048x1536 @ 240ppi).
I don't get it. I thought the low-res JPG would have fewer pixels. When zooming-in however, I see that there are just as many pixels but the color of each is different. The low-res picture has adjacent pixels sharing similar values (resulting in pixelation) but each pixel has slightly different color values.
Can someone explain this to me? is it better to resize in Photoship with the Image Size command and reduce the pixels-per-inch?
Thanks
-Ed

Ed,
I believe that you are confusing resolution and compression. All of your JPEG's are the same resolution, which is why the number of pixels is the same in PS. Changing the compression does not change the resolution. You can change the file size of a closed JPEG by either increasing the compression (as you did) or by leaving the compression the same and reducing the resolution. Compression works by throwing away data and representing similar areas in an image with fewer values to make the image smaller in file size, but looking approximately the same. As you throw away more and more data with higher compression values, you get the smaller file size at the expense of the quality of the image (which you saw as pixelation). When you open the image, it is reconstructed to the same number of pixels, even though more adjacent pixels have the same colors.
It depends on the purpose you have in wanting a smaller file size whether it is better to reduce the resolution or increase the compression to get it. Sometimes you might do both. For example when I email digital images to clients to choose an image, I will reduce the resolution to screen resolution (say to 4" x 6" at 72 ppi) and greatly increase the compression to lower the quality and make the image less likely to be printed.
I hope that this makes it a bit easier to understand.
John
John G. Blair

NEED HELP WITH RESOLUTION AND QUALITY?

hi guys
i have been making these vector type portraits in photoshop for the last couple weeks, it has all been going well until, when some one puts it up as a display picture on facebook etc the quality is not as good as when i just view the picture on my computer.
i have been starting the new in photoshop and using 800x800 pixels and the res at 72 pixels/inch, am i going wrong here some where? or is it the fact that i am using photoshop to do this task? im sure there are a lot of people that will advise me to use illustrator, which i have been thinking about doing. but i would like to know if this can be solved in photoshop first.
thanks in advance for your help
it is slightly pixel-ish in areas...
P.S. i have also notice it is work in the text "faulty" area.

so let me try get this straight lol the picture on the left is on facebook and that the quality is rubbish because its on facebook?
because when i opened the one on the right just to look at it, the quality was the same as when it was in photoshop.
they are both obviously jpg, so it has to be the fact that it is showing from facebook that makes it grainy, right?

Need help putting photos on my iPad

Trying to put scanned photos on my iPad. I have tried iTunes but under devices there is no photos to select. Need help.

Photos doesn't appear on the left-hand sidebar under Devices, it appears on the right-hand side in a similar way as for selecting and syncing music, apps etc
If you are on iTunes 11 on your computer then you may want to re-enable the left-hand sidebar via View > Show Sidebar (option-command-S on a Mac, control-S on a PC), which might make it easier to navigate and my instructions may make more sense.
To sync photos, connect and select your iPad on the left-hand side of your computer's iTunes (if you've enabled the sidebar), and on the right-hand side there should be a series of tabs, one of which should be Photos - if you select that tab you can then select which photo folders to sync to the iPad. There is a bit more info on this page. You will need to sync all the photos that you want on the iPad together in one go as only the most recent photo sync remains on the iPad - synced photos can't be deleted directly on the iPad, instead they are deleted by not including them in the next photo sync.
If you haven't enabled the sidebar, then from your library click 'iPad' at the top right of the screen and you should get a series of buttons along the top of the screen, including one for Photos

Magnify effect in photo gallery, need help...

Heya,
So if you visit
http://www.hookmedia.biz/cabinet_source/v4_f
and navigate to the "Gallery" page you'll see that, below the area
the large photo is displayed, there is a "film strip" of thumbnail
photo's. I need these photos to be magnified when you mouseover
them but I'm unsure of exactly how to do that. Can anyone help?
You can download the entire .fla via this link:
http://www.hookmedia.biz/cabinet_source/v4_f/index/fla
Once downloaded, double click on the main content area
(titled content_mc) and navigate to the second frame and open the
"photo_gallery" or "gallery" folder where you'll find the first
layer is actionscript for the photo gallery.
Thanks!

You rollover code doesn't work because you are assigning the
functions
before you load the images. The loaded images remove your
code. You should
not use loadMovie and use the MovieClipLoader class instead.
Then, in its
onLoadInit method you can assign your functions - so that
they are assigned
after the clip is loaded. Also, I'd either just create empty
clips, on the
fly, to load into or attach from the library. And
duplicateMovieClip is not
a property it is a method - calling like you are doing will
not work. If
you'd look in the Help you'll see that duplicateMovieClip can
accept an init
object, and also returns a ref to the new clip... So your
code can be much
simplified:
this.holder.duplicateMovieClip; //duplicates the MC holder
already on the
stage
this._name = "e"+i;
this["e"+i]_x = _x + 50;
this["e"+i]._alpha = 50;
To:
this.holder.duplicateMovieClip("e" + i,
this.getNextHighestDepth(),
{_x:theX, _alpha:50});
And you can't set _x to _x + 50 like that... for one you'd
need to use more
like this._x = this._x + 50 or this._x += 50. But it still
won't work here
since all the new clips are going to be created at x=0. You
need to
increment a variable... or base the spacing on your loop
variable, i - like
i *50.
Dave -
Head Developer
http://www.blurredistinction.com
Adobe Community Expert
http://www.adobe.com/communities/experts/

I still need help. i am technically challanged. i up graded my phonr to a 5 s. i backed up my phone on icloud. i cAn not get my notes or photos. it looks like the icloud email address is wrong. how can i change it or get my missing items

I need help. I am not good with technology. I upgraded phone today to 5 s I am missing notes and photos it looks like the cloud address is not correct. Any suggestions

Have you forgotten your password? - if so, you have a problem if the email address has gone dead.
If you know your password, go to the iTunes Store, click on Account. log in and you can change the associated email address.
If you don't know your password, and have no email address, you are going to have problems because it's difficult to see how Apple are going to identify you as the authorised owner of the account. Contact iTunes Support: go to http://www.apple.com/support/itunes/ - click on 'Other iTunes Store Features' in the list and then on 'Podcasts'. You will see a link to either 'Express Lane', which will guide you eventually to some contact options, or you may see a link to email them.

My ipod 5th generation has erased all of my music but when i restored my back up it made me update it too. and when i did it erased half of my photos and still my music wasnt on there i need help fixing it

I have a 5th generation pod and when i was trying to put music on my ipod it deleted all of my music and when i tryed restoring it it made me update it also well when i did it erased half of my photos and my music wasnt there anymor. i need help asap please

Hi,
To restore your music, connect to your computer's iTunes and try the following settings.
Then hit the Apply button on bottom right. I find it best to select "sync only checked songs and videos" in the Options in Summary.
Good luck

Need help to find photo's on my backup drive,since installing Mountain Lion cannot find where they are stored.The backups after ML install are greyed out except in Applications, MyFiles and Devices really welcome a hand with this please.

I need help to find my photo's please (2500) on my backup drive.Lost them after doing a clean install of Mountan Lion I have tried to find them but had no luck. I use Time Machine with a 1TB Western Digital usb drive. Thanking anyone in anticipation of a solution.

-Reece,
We only have 1 single domain, 1 domain forest, no subdomains, only alias. I had replied to the other post as well. But I am happy to paste it here in case anyone want to read it.
So, after a few months of testing, capture and sending logs back and forth to Apple Engineers, we found out there is a setting in AD, under User Account that prevent us to log into AD from Mountain Lion. If you would go to your AD server, open up a user account properties, then go to Account tab, the "Do not require Kerberos preauthentication" option is checked. As soon as I uncheck that option, immediately I was able to log into AD on the Mac client. Apple engineers copied all my AD settings and setup a test environment on their end and match exact mine AD environment. They was able to reproduce this issue.
The bad part about this is... our environment required the "Do not require Kerberos preauthentication" is checked in AD, in order for our users to login into some of our Unix and Linux services. Which mean that it is impossible for us to remove that check mark because most, if not all of them some way or another require to login into applications that run on Unix and Linux. Apple is working to see if they can come up with a fix. Apparently, no one has report this issue except us. I believe most of you out there don't have that check mark checked in your environment... Anyone out there have any suggestion to by pass or have a work around for this?

I dont know how i got my photos to my ipod touch from my pc and now i wanna delete them but couldn't. so need help. please let me know.

i dont know how i got my photos to my ipod touch from my pc and now i wanna delete them but couldn't. so need help. please let me know.

To turn off auto sync - launch iTunes and go to Edit>Preferences>Devices - check the box at the bottom that says - Prevent iPod, iPhones and iPads from syncing automatically. Click OK and then quit iTunes.
Connect your iDevice to your PC.
Launch iTunes,
Click on the device name on the left side of the iTunes Window.
Click on the Photos Tab in the iTunes window on the right.
Untick all of the photos or albums that you want to remove.
Click on Apply in the lower right corner of iTunes
If you untick or uncheck the Sync Photos heading and then click Apply it will remove all of the photos from the device when it syncs. In this screenshot - I have only certain albums and events selected to sync.

Iphoto update is messed how, i do i fix it. Photos that i try to sync aren't showing up in my "Last Import" or "Last Month" What's wrong with it? I need help a.s.a.p

please i need help on this. I really need to fix this

Remember: we cannot see your machine. There are 9 different versions of iPhoto and they run on 8 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Basic things like :
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For instance: 'iPhoto won't export' is best explained by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted?
- Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.
Posts that consist of "iPhoto doesn't work. Help" or "iPhoto won't print" or "Suddenly I have no photos!!!!!!!!!!" mean that any helper is simply guessing. More information means you get better assistance.

Need Help/Advice with Photo Web Gallery coming from SQL Database

This is my first attempt at a database driven website. I assume what I am trying to accomplish should be fairly easy for more experienced but I am stuck at this point.
First, let me explain what I am trying to accomplish.
I want to create a thumbnail photo gallery displayed in columns and rows. I want to be able to hover over or click on the thumbnail image and have a lightbox script display the image over the thumb page. I am developing locally right now with intent to upload to the hosting site upon completion.
I am developing with ASP vbScript pages. I have an SQL database where the paths to the image thumbnails and pictures are stored in a table. On the gallery page, I have created a div tag to hold my image recordset. Within this div, I have inserted 3 absolute positioned divs to hold the pictureID, the pictureName and the image inserted as a datasource. I then inserted the information from the bindings panel of my recordset. Last, I used a horizontal looper extension from Tom Muck to get the thumbnails to display in columns and rows. Everything works up to this point just fine.
Now, I want to be able to hover or click on a thumnail image and have it displayed in a lightbox. I downloaded and used a javascript called Lightbox 2 which contains 3 javascript files and a css stylesheet. I inserted the files into the head tag like instructed to but could not get things to work properly. Here is where I need help. Currently, I am clicking on the thumbImage binding within the image Div and creating a link holder. I am then binding the larger pictureImage to it with the a.href selected in the bind to. I am then adding the command to call the lightbox javascript. Now, when I test my page, my thumbnail images do not show up (my alt text does in its place) but the links are in place and you can click on the alt text and it will return the correct larger image, but not in the lightbox, just in a new window with no styles.
Am I going about this correctly? Can you use lightbox scripts with data-driven galleries? Does anybody have any suggestions of what I may be doing wrong or missing? Are there better ways to go about accomplishing this?
Any help would be appreciated as this dynamic data thing has my head spinning. Although I know a database is needed to simplify the update and maintenance of the photos while allowing them to be searchable by keywords and tags also set up in the database.
Thanks

As I explained, I am developing locally a the moment. I will see about getting the databased moved up to the hosting server and then provide a link for an example.
In the mean time, can you or anyone else explain a way that you would go about displaying an image thumbnail photo gallery laid out in rows / columns, with any lighbox script that would overlay the larger image over the existing page instead of opening a new browser window?
I don't have to use the method I tried to describe.
In all of the lightbox examples I have looked at thus far, they give instructions on how to append that javascript to a single static image or a group of static images, not images from a datasource. That is where I am getting confused.
Don't know if this will help or not but please see code below:
Javascript and CSS positioned in head tag

<link href="CSS/lightbox.css" rel="stylesheet" type="text/css" />
<script src="Scripts/protype.js" type="text/javascript"></script>
<script src="Scripts/scriptaculous.js?load=effects,builder" type="text/javascript"></script>
<script src="Scripts/lightbox.js" type="text/javascript"></script>

Calling for javascript in the galleryimage div when hovering over thumbnail image
    
    <div id="gallery">
      <p>
        
      </p>
      <table width="400" border="0" align="center" id="galleryNav2">
        <tr>
          <td width="100" align="center"><% If MM_offset <> 0 Then %>
              <a href="<%=MM_moveFirst%>">First</a>
          <% End If ' end MM_offset <> 0 %></td>
          <td width="100" align="center"><% If MM_offset <> 0 Then %>
            <a href="<%=MM_movePrev%>">Previous</a>
          <% End If ' end MM_offset <> 0 %></td>
          <td width="100" align="center"><% If Not MM_atTotal Then %>
            <a href="<%=MM_moveNext%>">Next</a>
          <% End If ' end Not MM_atTotal %></td>
          <td width="100" align="center"><% If Not MM_atTotal Then %>
            <a href="<%=MM_moveLast%>">Last</a>
          <% End If ' end Not MM_atTotal %></td>
        </tr>
      </table>
      <p> </p>
      <table align="center" id="HorzLooper">
        <%
startrw = 0
endrw = HLooper1__index
numberColumns = 5
numrows = 5
while((numrows <> 0) AND (Not rs_ssfGallery.EOF))
startrw = endrw + 1
endrw = endrw + numberColumns
%>
        <tr align="center" valign="top">
          <%
While ((startrw <= endrw) AND (Not rs_ssfGallery.EOF))
%>
          <td><div id="galleryImage">
            <div id="galleryThumb"><a href="images/pic/<%=(rs_ssfGallery.Fields.Item("picture_url").Value)%>"rel="lightbox"><img src="images/thumb/<%=(rs_ssfGallery.Fields.Item("thumb_url").Value)%>" alt="<%=(rs_ssfGallery.Fields.Item("alt_url").Value)%>" /></a></div>
            <div id="galleryImageID"><%=(rs_ssfGallery.Fields.Item("picture_ID").Value)%></div>
            <div id="galleryImageFamily"><%=(rs_ssfGallery.Fields.Item("family").Value)%></div>
          </div></td>
          <%
startrw = startrw + 1
rs_ssfGallery.MoveNext()
Wend
%>
        </tr>
        <%
numrows=numrows-1
Wend
%>
      </table>
      <p> </p>
      <table width="400" border="0" align="center" id="galleryNav">
        <tr>
          <td width="100" align="center"><% If MM_offset <> 0 Then %>
              <a href="<%=MM_moveFirst%>">First</a>
          <% End If ' end MM_offset <> 0 %></td>
          <td width="100" align="center"><% If MM_offset <> 0 Then %>
              <a href="<%=MM_movePrev%>">Previous</a>
          <% End If ' end MM_offset <> 0 %></td>
          <td width="100" align="center"><% If Not MM_atTotal Then %>
              <a href="<%=MM_moveNext%>">Next</a>
          <% End If ' end Not MM_atTotal %></td>
          <td width="100" align="center"><% If Not MM_atTotal Then %>
              <a href="<%=MM_moveLast%>">Last</a>
          <% End If ' end Not MM_atTotal %></td>
        </tr>
      </table>

    </div>
    
Thanks for any help or suggestions.

Need help placing photo image in laptop screen of a video...

I have footage that is both zooming and panning, and need a photo image to fit within the laptop screen space during the duration of the pan/zoom. Should I use "Track Motion" accompanied with key-framing in 2D? Does this make sense? Is there an easier way to achieve this, or is that the way to go?
Here is a rough take of the clip of which I speak. In reality, we will be placing the same image on both the HDTV and the laptop in the shot. Hopefully, this will make what I have said above a little more clear. Hope you can help. Thanks much.

If you have CS4 then I would recommend using Mocha for AE (a planar tracking software from imagineers system that comes bundled with AE CS4). It's basically designed for the kinds of stuff you described. There are some helpfull tutorials on the imagineer systems's website:
http://www.imagineersystems.com/support/mocha-AE/tutorials/

I need help photos' resolution.

Similar Messages

Maybe you are looking for