I need help please , i try to use itunes but my iPhone don't appear on itunes, i try everyting ,dowwload itunes again restart computer and iPhone,restart running device support,etc.
i need help please , i try to use itunes but my iPhone don't appear on itunes, i try everyting ,dowwload itunes again restart computer and iPhone,restart running device support,etc.
Windows doesn't detect iPhone: http://support.apple.com/kb/ts1538
Mac: http://support.apple.com/kb/ts1591
Similar Messages
-
HT204380 I can't access my FaceTime and messages through my iPod touch, I need help please!!!
I can't access my FaceTime and messages through my iPod touch, I need help please!!!
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
You posted in the iPad forum instead of the iPod forum. To get answers to your question, next time post in the proper forum. See https://discussions.apple.com/index.jspa I'll request that Apple relocate your post.
Cheers, Tom -
My iPhone 6 can't find my macbook pro on the airdrop list, although everything is in place, bluetooth, wi fi gets, need help please ?
Dear Niel, thank you but my mac is (MacBook Pro (Retina, 15-inch, Early 2013).
and i can send from it to my iPhone , but not vice versa -
After my iphone4S update to 7.0.6, it have a problem that keep searching network then no service show on display. Can't call. I have try check sim card, reset network settings, and restore my iphone. Still not working at all. Need help please.Urgent.TQ
Izit software or hardware? Confuse:(
Only can use wifi now.
Any way thanks guys for ur suggestion:) amishcake and simes -
Hi i need help please i been playing clash of clans over 13 months. And today o realise what someone using my game Centra. Someone playing on my game Clash of Clans. I been change my Apple ID password, email, but doesn't work. Then I playing game I can see what someone else trying connecting to my game And I don't know what to do.So if you can help me please? I don't wanna lose my game.
Contact iTunes
Contact iTunes -
Hi i need help please i been playing clash of clans over 13 months. And today o realise what someone using my game Centra. Someone playing on my game Clash of Clans. I been change my Apple ID password, email, but doesn't work. When I playing game I can see what someone else trying connecting to my game And I don't know what to do.So if you can help me please? I don't wanna lose my game.
Hello Vaidas Vaidas,
It sounds like you are noticing someone else is accessing your Clash of Clans data by playing the game and you have tried to reset your Apple ID password. If you are following the steps outlined in this article:
Apple ID: Changing your password
http://support.apple.com/kb/ht5624
What is preventing you from changing your password? Any error messages or prompts?
Thank you for using Apple Support Communities.
All the best,
Sterling -
After many months of non-use, when I tried to open Photoshop CS4 Extended, I got an error message 148.3. "Licensing for this product has stopped working." I need help, please.
Error "Licensing has stopped working" | Windows
Error "Licensing has stopped working" | Mac OS
Mylenium -
had a problem with my itunes so i had went on itunes website and reinstall itunes for windows and after it complete it said that the feature yoy are trying to use is on a network resource that is unavailable i need help please!!!!!!!!!
first, head into your Add/Remove programs and uninstall your QuickTime. if it goes, good. if it doesn't, we'll just attend to it when we attend to itunes.
next, download and install the revo uninstaller http://http://www.revouninstaller.com/revo_uninstaller_free_download.html. use it to clear any existing itunes and/or QuickTime installation configuration information from the PC.
next download itunes. it worked for me hope this is helpful!!
oonce you get into the revo uninstallergo thru to delete itunes hit uninstall on the itunes icon then you will go thru to it will tell u the same nmessage about the feature and network hit cancell then go thru and hit scan (make sure bthe advance scan button is pushed) this will take awhile but go thru the list and hit everything associated with itunes. hit delete then install itunes again. it worked for me hope it works for you! -
HI. When I plug in my charger and use my macbook, I feel some kind of roughness on the body. It feels like some current flowing around it. Need help please.
My 2006 MacBook Pro and my 2011 MacBook Air both do it. It happens because the earth ground stops at the power brick and is not carried through to the case of the machine. It is not dangerous or the machine would not have been UL approved.
Since I operate on battery 99.9999% of the time it doesn't bother me at all. -
I have a Steinberg MI4 and a Roland Fantom X7, and am trying to use my Fantom in Logic to record audio. Need help setting it all up using MIDI cables. Please help !
Encryption wouldn't matter except for Wifi.
While 10.2 might help, there's not much you can do on the Internet these days with less than 10.4.11
Tiger Requirements...
To use Mac OS X 10.4 Tiger, your Macintosh needs:
* A PowerPC G3, G4, or G5 processor
* Built-in FireWire
* At least 256 MB of RAM (I recommend 1GB minimum)
* DVD drive (DVD-ROM), Combo (CD-RW/DVD-ROM) or SuperDrive (DVD-R) for installation
* At least 3 GB of free disk space; 4 GB if you install the XCode 2 Developer Tools (I recommend 20GB minimum)
http://support.apple.com/kb/HT1514
http://www.ebay.com/sch/i.html?_nkw=mac+os+x+tiger+retail+10.4
See Tom's, (Texas Mac Man), great info on where/how to find/get Tiger...
https://discussions.apple.com/message/15305521#15305521
Or Ali Brown's great info on where/how to find/get Tiger...
http://discussions.apple.com/thread.jspa?messageID=10381710#10381710
As far as Memory, that's sort of easy, find your eMac here...
http://eshop.macsales.com/MyOWC/Models.cfm?Family=emac&sType=Memory
As far as Hard Drive, it's not easy to replace the Internal drive, I'd maybe suggest an external Firewire drive to boot from...
http://eshop.macsales.com/item/Other%20World%20Computing/MAU4S7500G16/ -
my kids enetered the wrong unlock code on my ipod touch too many times and now the screen says IPOD DISABLED connect to itunes. I have tried connecting it to itunes and I cant because the ipod is locked. need help please! any ideas? Thanks, Nick
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
I have an iphone bought in the UK but I'm in Europe and can not use it I need help please help me thanks
wiliiam rrichard wrote:
Because My iphone is Locked on the United Kingdom
No it is not. iPhones, like all cell phones are not locked to countries. They are locked to carriers.
Only the carrier to whom the device is locked can unlock it. Contact the carrier. -
Allan Eckert, need help on G5 Coolscan 5000 use
Allan , need help on G5 Coolscan 5000 use. Please email me from my profile.
Thank you,
FrankJust to chime in with my 2 cents and experience ...
A few years ago I used a coolscan 4000 to scan my personal slides as a project. I had about 2000 of them from over the last 20 years and it took me about 6 weeks of personal time to do this. It was done on a Windows P4 2.5GHz Dell, but the slowest part was the actual scanning itself. I used 1 pass, Digital ICE, and saved them as 16bit TIFFs .... a whopping 65MB per scan.... To speed things up I bought the Nikon Slide adapter ($600 CDN) that would batch scan 50 slides at a time, however it would jam ( especially with the older cardboard mounted Kodachrome slides) periodically ... oh maybe 20-30 times with 2000 slides, and that really wasted time as I had to determine what need to be rescanned, and restart at the offending slide. This also would happen in the middle of the night when I was sleeping after setting the batch scan to run all night. Jamming often occurred as two slides tried to be scanned at the same time, as well as a slightly 'bent or creased' mount I found that the newer plastic mounts were better, but not entirely jam free, Nikon has some info on how well the various mounts work in their adapter on their website. Anyway I wish you well with 300+K slides to scan and recommend the batch slide adapter, and I think your speed will be determined more by the HW scan time than the CPU/GPU, so I would try to get as many scanners going as you can with that number of slides.
-Robert
PS I now have all originals in Aperture, and gave up the Dell 3 years ago. -
My Ipad is disabled by wrong password and I have tried to reset and restore a few times with no success. Now I-tunes won't even recognize the I-pad in recovery mode. I need help please.
If the iPad was running iOS 7, iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
I accientally synced my iPhone to 2 different computers. Now my older apps are on one computer and new apps are on another. Every time I try to sync all apps on one computer it takes the other apps of and just syncs what is on that computer - Help please
I cannot for the life of me figure this out.What you need to do is connect your phone to iTunes but do not click sync. Go to File at the top and click transfer purchases from phone, that'll put all your apps into iTunes. When it's done transferring, locate your phone on the sidebar and click it. Then find the apps option above the picture of your iphone, you can select which apps you want or don't want on your phone. After selecting your apps then you can sync. Once you do this you should never have your problem anymore.
Maybe you are looking for
-
I am using Windows 7, 64 bit. I am unable to download iTunes, I get the error message "A newer version of QuickTime is already installed. This installation cannot proceed while the newer version of QuickTIme is installed." However when I try to unins
-
Read parked and posting document from one FM
Hi all, IS theere any FM avaliable to read parked and posting document from one function module. Please let me know if anything is there. Thanks
-
How to show Report Usage and History
I need to list information about which reports my company has run in the past 3 months. We will be running some upgrades soon, and now is a good time to clean-out any reports that we don't use anymore. I've already used the System Administrator -> Co
-
Metadata entry on grouped images in Aperture
Lots of times I drag a dozen or so photos from the desktop to Aperture. They will all have identical metadata (well, the custom ones, anyway): all are keyword 'Plant Material', and all are the same 'Genus species'. Selecting them in Aperture doesn't
-
Flash CS4 update failing.... why?
I have fully operational and registered versions of many of the CS4 programs, but lately any attempts to update them are failing, using either Adobe Updater, or by downloading the update itself. For example, today I wanted to update Flash CS4 10.0.0