I need help ! Pls give me some advice rgds my 5800...

My phone firmware version is V20.
i`ve meet a few problem after updating the phone software from Nokia Care Center.
1. After updating, due to the issued of the CALL WAITING, now everytime when i am using the phone, if someone call me the phone never alert me again if there is a second incoming call. (Never show " waiting" alert but only the incoming call number)
2. It happen also if i call others when they are using the phone.
    ( For the previous model of phone i am with Nokia, i knew it should have an alert if the person i called is currently on the line)
3. Memory Card problem
   - My MESSAGE memory in use is set to save in MEMORY CARD. But the problem is, it always switch back to
     phone memory itself and display a notice to me " unable to save message in memory card ", after
     that the message setting will turn back to the phone memory again.
4. LCD Screen problem
    - Its not because of any screen crack problem, but i think is worst than it because sometime when i operating
      the phone, the screen will change the colour itself, sometime Green, Purple, Grey Or Red and sometime
      turn it to a black screen also. Ecspecially when i am writing the message or playing games. So i need to use
      the screen lock key to Lock and Unlock again to solve the problem.
      ( Is it the problem with the LCD Display ? Or... It just because the firmware problem ? )
Thks/Rgds
Vallen from Malaysia

try the hard reset if it fails send to a nokia care centre
With your 5800 turned off,
Press and hold [Green] + [Red] + [Camera] Keys
Turn phone ON, and keep pressing it until you see the Nokia Shaking Hands Logo.
The Default code is still 12345, of course
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Similar Messages

I lost my iPhone 3 days ago.. it wasn't connet to internet and I don't know how find it without the connection.. please help me and give me some advices!!

I lost my iPhone 3 days ago.. it wasn't connet to internet and I don't know how find it without the connection.. please help me and give me some advices!!

Change your passwords.

Nano 1 generation or nano 2 generation ?give me some advice

I want to buy a ipod recently ,I hesitate to choose a definite one.I focus on nano 1 generation and nano 2 generation,please give me some advice.
thanx!

It would have to depend on what your needs are; Capacity, features etc. W/ the 2nd gen nano, you can get a choice of colors, instead of just black or white.
The nano forum will probably have more qualified opinions.

I'm trying to downgrade my storage on my ipod but when I chose my new storage i'm not able to complete the choice because the 'done' button doesn't do anything. can someone please give me some advice?

I'm trying to downgrade my storage on my ipod but when I chose my new storage i'm not able to complete the choice because the 'done' button doesn't do anything. can someone please give me some advice?

Are you choosing a different plan before tapping Done?
To downgrade, you should be doing the following:
Go to Settings > iCloud > Storage & Backup.
Tap Change Storage Plan.
Tap Downgrade Options and enter your Apple ID password.
Choose a different plan to use when your current storage plan expires.
Tap Done.

Give me some advice

hi,all
I began to learn BW a little more than three months ago. During this time,
I found myself becoming interested in it. I, therefore, am determined to
learn it well.
But our project is just at the start, and the external consultants seem unwilling
to teach me .
what should i do.
Please give me some advice on how to do a good job in it and how to get along well with the consultants.

Hi Lawrence,
Try to use SDN as much as you can... Search in forums what ever doubts you have and post your doubts... Try to do some test developments if you have a Development system... It will take time for you to work like the other consultants... but Only way to learn BW is to acquire the Practical Knowledge....search all How to do stuff in forum...
All the Best
Cheers,
Sudhakar.

I updated my software today and since have not been able to use some of the games on Facebook. I have installed the flash player 12 and still problems, can anyone give me some advice?

I updated my software today and since have not been able to use some of the games on Facebook. I have installed the flash player 12 and still problems, can anyone give me some advice?

Your above posted list of installed plugins doesn't show the Flash plugin for Firefox.<br />
See [[Managing the Flash plugin]] and [[Installing the Flash plugin]]
You can check the Adobe welcome and test page: http://www.adobe.com/software/flash/about/
You can use this manual download link:
*http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller

I can not read any contents in my yahoo inbox messages? It is blank when i opened my message. Are there any setting or updated that i missed? Please give me some advices? Thank you. Phuong

Question:
I can not read any contents in my yahoo inbox messages? It is blank when i opened my message. Are there any setting or updated that i missed? Please give me some advices? Thank you. Phuong

Hi AM_Kidd.
Thanks for your reply.
I have done a complete uninstall and re install of iTunes and all related apple programs from my laptop through control panel, add remove programs and also by going through program files and deleting all tracers of any left over folders remove programs may have missed.
My apologies for forgetting to add this in my original post.
Thanks again

Difference between L1,L2 and L3 support,pls give me some examples

Hi,
can u please tell me the difference between L1,L2 AND L3 SUPPORT.pls give me some examples

knowledgespring wrote:
People keep ask which level support are you supporting..? how do we answer to these questions in interview.. could one please provide info on this.
thank you in advance.Since the terms themselves can be defined differently by different organizations, you'll have to ask the interviewer how HE defines those terms. Once you know that you should know the answer. In asking him how he defines them, you might explain that you are asking because you know the terms can mean different things to different organizations.

Tried to reinstall my CS6 master collection onto my iMac. It will not install - In Design, Fireworks, Premiere Pro, Encore, After Effects, Flash Professional, Photoshop, Illustrator & Prelude. Could you give me some advice. I noticed problems when I was d

Tried to reinstall my CS6 master collection onto my iMac. It will not install - In Design, Fireworks, Premiere Pro, Encore, After Effects, Flash Professional, Photoshop, Illustrator & Prelude. Could you give me some advice. I noticed problems when I was doing some 3D work and the computer kept crashing and thought I would just reinstall my software.

uninstall (using the uninstallers), clean Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 and then reinstall.

Give me some advice about the big message

Whether JMS provider provide the function to deal with big message? i haven't found.Whether should I split the message myself? but if i split myself,the message as a whole will be difficult to ensure whole.I can only receive message one by one.If i only receive some of the splitted messages,and the other still in the topic ,all of the messages are unuseful.if u have practice in this ,give me some good advice pls.thanks.

There are JMS servers in the market, which provide an inbuilt mechanism to send large messages. Some of them implement this by internally compressing/splitting into various parts and who so ever is listening on that destination is delivered the complete message/file by concatinating/uncompressing them at the consumer side. Do check for this support in your JMS provider.

A erase my e mail account, need help pls

a erase my e mail account, need help they werw my job e MAIL

It's a disgraceful failure of any customer service by BT. Had my Btinternet email account since they launched backin ... was it 1997? Everything digital in my life is spidered into the account now. Its been used as my registration point for virtually everything for the past fifteen years. And now getting less than 30 days notice to try and find every single product and website I have registered with and then change all my details?!?!? Hell, I'd need about a year to do so; and then I would still probably have missed some! By their actions, they potentially cutting me off from products that I have purchased & tied to this email address.
Add to that the fact that their email that comes into your inbox sources from some dodgy 'analytics planning' website, as all the links route through there... I had serious doubts as to its legitimacy and forwarded it to their abuse contact & opened a case regarding it. Highly unprofessional of them - especially when you consider that we are repeatedly advised by BT to never click on links unless we are sure of their validity. And should never, ever, enter our account details on any other site other than theirs.
Shoddy BT, very very shoddy. I would expect a higher standard of business from such a company. And would definitely expect a proper notification click through to come up regarding this service change when I log into email. I would say a good proportion of their users will deregard the email as a phishing attempt. **bleep** cowboy operation.

Urgent!!! please give me some advice

i quite new in J2ME programming. i encountered a problem that my MIDlet cannot pass parameter to servlet. i had tried to not using os.flush(), but it's still not working. please give me some suggestion!
MIDlet
* Login.java
import javax.microedition.midlet.*;
import javax.microedition.lcdui.*;
import javax.microedition.io.Connector;
import javax.microedition.io.HttpConnection;
import javax.microedition.io.StreamConnection;
import java.io.DataOutputStream;
import java.io.DataInputStream;
import java.io.InputStream;
import java.io.OutputStream;
import java.io.IOException;
import java.util.*;
public class Login extends MIDlet implements CommandListener {
Display display;
boolean commandAvailable;
// String idPassword;
CommandThread commandThread;
Form inputForm;
Form outputForm;
TextField userid;
TextField password;
StringItem response;
Command cmdExit;
Command cmdOK;
public void startApp() {
display = Display.getDisplay(this);
inputForm = new Form("Authorization");
userid = new TextField("User",null,25, TextField.ANY);
inputForm.append(userid);
password = new TextField("Password",null, 15, TextField.PASSWORD);
inputForm.append(password);
cmdOK = new Command("OK",Command.SCREEN,1);
cmdExit = new Command("Exit",Command.EXIT,1);
inputForm.addCommand(cmdOK);
inputForm.addCommand(cmdExit);
inputForm.setCommandListener(this);
outputForm = new Form("Student Option");
response = new StringItem(null,null);
outputForm.append(response);
outputForm.addCommand(cmdExit);
outputForm.setCommandListener(this);
commandAvailable = false;
commandThread = new CommandThread(this);
commandThread.start();
display.setCurrent(inputForm);
public void pauseApp() {
public void destroyApp(boolean unconditional) {
public void commandAction(Command cmd, Displayable d) {
     if (cmd == cmdExit) {
destroyApp(false);
notifyDestroyed();
else if (cmd == cmdOK)
synchronized (this) {
commandAvailable = true;
notify();
class CommandThread extends Thread {
MIDlet parent;
boolean exit = false;
public CommandThread(MIDlet parent) {
this.parent = parent;
public void run() {
while (true) {
synchronized(parent) {
while(!commandAvailable) {
try {
parent.wait();
catch (InterruptedException e) {
commandAvailable = false;
performLogin();
public void performLogin() {
HttpConnection conn = null;
InputStream is = null;
OutputStream os = null;
byte[] receivedData = null;
try {
String url = getAppProperty("Login.URL");
conn = (HttpConnection)Connector.open(url);
     byte[] postData = createPostData();
conn.setRequestMethod(HttpConnection.POST);
conn.setRequestProperty("User-Agent", "Profile/MIDP-1.0 Configuration/CLDC-1.0");
conn.setRequestProperty("Content-Type","application/x-www-form-urlencoded");
     conn.setRequestProperty ( "Content-Length", Integer.toString (postData.length));
// conn.setRequestProperty("Accept", "application/octet-stream" );
conn.setRequestProperty("Connection", "close" );
// byte[] postData = createPostData();
System.out.println("postData="+postData);
conn.setRequestProperty("Content-length",Integer.toString(postData.length));
     os = conn.openOutputStream();
     os.write(postData);
for (int i=0;i<postData.length;i++)
          os.write(postData);
//     os.flush();
     os.close();
     is = conn.openInputStream();
     String contentType = conn.getType();
int len = (int)conn.getLength();
if (len > 0) {
receivedData = new byte[len];
int nb = is.read(receivedData);
else {
receivedData = new byte[1024];
int ch;
len = 0;
while ((ch = is.read()) != -1) {
receivedData[len++] = (byte)ch;
response.setText(new String(receivedData,0,len));
display.setCurrent(outputForm);
catch (IOException e) {
System.out.println(e.getMessage());
e.printStackTrace();
finally {
try {
if (is != null) {
is.close();
if (os != null) {
os.close();
if (conn != null) {
conn.close();
catch (IOException e) {
public byte[] createPostData() {
StringBuffer sb = new StringBuffer();
sb.append("userid=");
sb.append(userid.getString());
sb.append("&password=");
sb.append(password.getString());
System.out.println("sb = <" + sb.toString() + ">");
return sb.toString().getBytes();
servlet
import java.io.*;
import java.text.*;
import java.util.*;
import javax.servlet.*;
import javax.servlet.http.*;
import java.sql.*;
public class LoginServlet extends HttpServlet {
static final String dbURL = "jdbc:mysql://localhost/projectdb?" + "user=wongyuenmei&password=wongyuenmei";
public void doPost(HttpServletRequest request,HttpServletResponse response) throws IOException, ServletException {
Connection conn = null;
String nextJSP = null;
try {
Class.forName("org.gjt.mm.mysql.Driver");
catch (ClassNotFoundException e) {
throw new ServletException("Unable to load JDBC driver");
try {
String id = request.getParameter("userid").trim();
String pass = request.getParameter("password").trim();
     if (id==null)
String tempid=id;
String temppass=pass;
conn = DriverManager.getConnection(dbURL);
Statement stmt = conn.createStatement();
String query = "SELECT cno, idno " + "FROM student " + "WHERE idno = '" + id + "'AND password ='" + pass + "'";
ResultSet rs = stmt.executeQuery(query);
if (rs.next()) {
StringBuffer fullName = new StringBuffer();
fullName.append(rs.getString(1));
fullName.append(" ");
fullName.append(rs.getString(2));
request.setAttribute ("fullName", fullName.toString());
nextJSP = "/LoginOK.jsp";
else {
     StringBuffer temptest = new StringBuffer();
     temptest.append(tempid);
     temptest.append(&temppass);
     request.setAttribute("temptest", temptest.toString());
nextJSP = "/LoginFailed.jsp";
conn.close();
ServletConfig config = getServletConfig();
ServletContext context = config.getServletContext();
RequestDispatcher rd = context.getRequestDispatcher(nextJSP);
rd.forward(request, response);
catch (SQLException e) {
throw new ServletException("SQL call failed");
catch (Exception e) {
throw new ServletException(e.getMessage());
finally {
if (conn != null) {
try {
conn.close();
catch (SQLException e) {
throw new ServletException("connection close failed");
public void doGet(HttpServletRequest request, HttpServletResponse response) throws IOException, ServletException {
doPost(request, response);
ur help is very appreciated!

Still the same problem. All the parameter get by server are null.
Using GET, and add parameter to url, everything is fine.
encodedPostData = "E2EE_PAM_ID"+"="+E2EE_PAM_ID+"&"+"E2EE_USER_ID"+"=" E2EE_USER_ID"&"+"E2EE_USER_SEGUID"+"="+E2EE_USER_SEGUID+"&"+"E2EE_RPIN"+"="+E2EE_RPIN
+"&LoginBtn=Login";
c = (HttpConnection)Connector.open(request);
c.setRequestMethod(HttpConnection.POST);
c.setRequestProperty("User-Agent","Profile/MIDP-1.0 Configuration/CLDC-1.0");
c.setRequestProperty("Content-Type:","application/x-www-form-urlencoded");
os = c.openOutputStream();
os.write(encodedPostData.getBytes());
//os.flush();
System.out.println(encodedPostData);
rc = c.getResponseCode();
if (rc != HttpConnection.HTTP_OK) {
throw new IOException("HTTP response code: " + rc);
is = c.openInputStream();
..........

Need help to start with some file and text manipulation

Hello script mavens,
I need help with starting a script that does the following:
-within a base folder it takes an inventory (list?) of all the files (which happen to be image files).
-creates a new folder inside the base folder and calls it imagesX where X increases by one every time the script is run
-moves all the files into the images folder
-within the base folder it creates a new text file and calls it imagesX.js
-writes a "//-" into imagesX.js
-then writes the list of filenames into the imagesX.js twice, separated by an empty line, and adds a semicolon to the end of each filename and saves imagesX.js
-from a folder a level above the base folder it copies a file called index.html into the base folder and renames in indexX.html
-in indexX.html it replaces a string "replaceThis" with "imagesX.js"
The task is more complex but this would help me tremendously do the rest.
If I am asking for too much on this forum please let me know

This should get you started.
The description of how you want to write the data isn't clear, but the rest should work (untested):
property imageNum : 0 -- last used ImageNumber
-- within a base folder it takes an inventory (list?) of all the files (which happen to be image files).
-- get the folder:
set baseFolder to (choose folder)
-- now get the files within it:
tell application "Finder"
set fileList to every file of folder baseFolder as alias list
end tell
--creates a new folder inside the base folder and calls it imagesX where X increases by one every time the script is run
tell application "Finder"
set imageNum to imageNum + 1
set newImageFolder to make new folder at baseFolder with properties {name:"images" & imageNum}
-- moves all the files into the images folder
move every file of folder baseFolder to newImageFolder
--within the base folder it creates a new text file and calls it imagesX.js
set textFile to (open for access file (baseFolder as text) & "images" & imageNum & ".js" with write permission)
--writes a "//-" into imagesX.js
write "//-" to textFile
-- then writes the list of filenames into the imagesX.js twice, separated by an empty line, and adds a semicolon to the end of each filename and saves imagesX.js
-- need more info here
-- a blank line between each instance of the file name? or all file names, blank line, all file names again?
-- an example, please
close access textFile
--from a folder a level above the base folder it copies a file called index.html into the base folder
--and renames in indexX.html
--in indexX.html it replaces a string "replaceThis" with "imagesX.js"
-- the easiest way of doing this is to read the file and write a new copy with the changes - that's easier than changing it in situ:
set indexHTML to (read file "index.html" of folder (container of baseFolder))
set {oldTIDs, my text item delimiters} to {my text item delimiters, "replaceThis"}
set indexHTML to text items of indexHTML
set my text item delimiters to "imagesX.js"
set indexHTML to indexHTML as text
set my text item delimiters to oldTIDs
set indexFile to (open for access file ("index" & imageNum & ".html") with write permission)
write indexHTML to indexFile
close access indexFile
end tell

My ipad 2 suddenly shut off and asked me to connect to itunes it asks me to restore but it wont work need help pls

my ipad 2 suddenly shut off and asked me to connect to itunes it asks me to restore but it wont work need help pls

The iPad is telling you it has entered the recovery mode - you need to follow the instructions in http://support.apple.com/kb/HT1212 for connecting to a computer running iTunes by way of the recovery mode.

My wlan doesn't work any more need help pls

my wlan doesn't work any more need help pls

Maybe you'd like to clarify "doesn't work".

I need help ! Pls give me some advice rgds my 5800...

Similar Messages

Maybe you are looking for