I need help, pop up about Certificate Problems and facebook wont work

i keep getting a pop up about Certificate Problems on every page, i just updated my soft ware and i cannot go on facebook.

Trouble Shooting and related keyboard commands:
Startup Manager: How to select a startup volume
Mac OS X: Starting up in Safe Mode
Resetting your Mac's PRAM and NVRAM
"To continue booting, type 'mac-boot' and press return" Message
Resetting Cuda/PMU on Power Mac G5, Power Mac G4, Power Macintosh G3
Resolve startup issues and perform disk maintenance with Disk Utility and fsck
Mac OS X 10.4, 10.5: Gray screen appears during startup
Mac OS X 10.4 Help: I see a blank blue screen when I try to start up my computer
Avoid unnecessarily resetting the SMC or PMU for troubleshooting purposes
Note: There is NO magic time required to clear the PMU. A firm, complete push is all that is required.
The PMU reset button is a momentary contact switch because the reset only requires momentary contact.
Another myth is that more than 2 chimes during a PRAM reset resets better.
A reset is a reset.
If you need more than is done in a PRAM reset after 2 chimes, use the NVRAM reset in Open Firmware.
Keyboard Shortcuts:
Mac OS X keyboard shortcuts
Keyboard shortcuts - Mac Guides
Keyboard shortcuts in OS X | creativebits
Mac OS X Keyboard Commands
what does "DOS" mean ?? " boot in to DOS ", as you used it ??
Disk Operating System
That would be "DOS like" as in like the screen that you use in booting a Windows machine.
It's the black with white text screen that you get when you boot to Open Firmware (CMD+OPT+O+F)
Booting Mac OS X

Similar Messages

There is some kind of billing problem and it wont work using an other card what is wrong? What should i do to fix this? :) all answer will be apreciated! :)

Billing problem and it wont work using another card... Help

Billing problem and it wont work using another card... Help

TS3212 Why can't I find a help # to call about my problem "iTunes has stopped working"

"iTunes has stopped working"
Acer system, Windows 8, trying to download iTunes for Windows 8. Partial loads but at @ 75% stops. Worked with prior version of Windows transferred over.
Full message: "A problem caused the program to stop working correctly, Windows will close the program and notify you if a solution is available."
Troubleshooter didn't help, removing and down loading iTunes for Windows 8 did not work. same message each time.
Windows message says its an "incompatible program."
How do I get this to load correctly? AND HOW IN THE WORLD CAN I TALK TO SUPPORT ABOUT THIS PROBLEM, I HAVE SPENT 1/2 DAY TRYING

Apple don't provide free telephone support for iTunes.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

3gs no service after updating to ios 5 tried network reset, reset all settings and even restoring from back been with out phone for 3 weeks now need help telus cant find network problem and apple has bad customer support please help!!!

my 3gs has no service after updating from ios 5 tried resetting network settings, resetting all settings and restoring from back up on itunes.
telus cant find any network problems and apple is difficult to deal with.please help 3 weeks with no phone and $70 a month not happy.

I have been having a similar problem for the last few days.Without warning the signal will just completely duck out leaving the device searching for several minutes before settling on a no signal message.
Sometimes restarting the device, toggling data and 3g settings or toggling Airplane Mode will set things right. However, a lot of the time I've been left without a working phone.
I don't believe this is a SIM issue, as I had to change my SIM only one month ago for another signal related problem. Again any help would be appreciated here as well.

Need help asap! New to Audition and its freezing. work is not saved!

So I've edited an audio file and after adding an envelope it's like the program is freezing but not completely. I can use keyboard shortcuts, but I can't click on anything. When I try to click on File or Edit at the top menu, I hear this stupid little chime noise.
I'm looking in the manual but I can't see a shortcut for saving your work. Is there one?
I'm an idiot for not saving sooner, but I really don't want to start all over. I'm having to edit an instrumental track along with a version that has the vocals so I can keep track of what I'm doing where. It's been a long and tedious process and I don't have much time to finish.
Any advice? Can I save somehow with a shortcut?
Has anyone else come across this problem?
I saw another user here that was having crashes when he saved, but I ran msconfig and didn't see anything that mentioned supportsoft as a manufacturer or anything like they mentioned, let alone find one that was clicked. I'm running Vista, by the way.
If someone can help me quickly I would really appreciate it.

Me again, just thought I'd add a few more details that might help someone understand what's happening.
When I hold my cursor over any of the controls or buttons on the screen, the little text that usually pops up to explain the action of that particular button doesn't even show up. Nothing with the mouse is working, although the mouse is running the rest of my computer just fine.
Also, I'm running a new Dell with Vista. I've been using audition for only an hour or so total but it's been fine up until now.
My best hope is that there is a way to save my work so I can reboot the computer and see if that solves it. Otherwise, I'm screwed.
Please help!

Lately and i dont know why i see a pop up about a problem with script. can some1 help me?

there is a pop up about a problem with script. it ask me end and contuniue the script. i didnt have that problem before. plz help me it gets really irritating. it asks a lot

This issue can be caused by an extension that isn't working properly.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

Need help my window is in thai and i dont understand at all.how to convert to english?

need help my window is in thai and i dont understand at all.
how to convert to english? i been trying for days but still cannot change it.
because i cannot read thai..please help me step by step..
my pc is touchsmart 9100 windows 7 professional.
Not a single word is in english if i go to 'region and language' to change it.
Everthing is in thai in the system.
This question was solved.
View Solution.

Hi,
OK. That means the default display lange of the OS is Thai. That is what was purchased.
You can try downloading and using the language appropriate LIPS (language interface package software) from Microsoft to change the display language.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Need help with how to reset bios and admin password to reformat hard drive in 8440p elitebook.......

need help with how to reset bios and admin password to reformat hard drive in 8440p elitebook? removal of cmos, resetting laptop, using cccleaner, windows password recovery and hiren's was noneffective, any help is appreciated. thanks

Hi,
As your notebook is a business class machine, security is more stringent - the password is stored in non-volatile memory and there are no 'backdoor' passwords. Your best option would be to contact HP regarding this.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

I need help syncing my contacts between Outlook and iPhone using iTunes. I followed the steps given and ended up with just email addresses showing in my contacts even though I have phone numbers and snail mail in my Outlook Contacts. Using Windows 7

I need help syncing my contacts between Outlook and iPhone using iTunes. I used the knowldge document and set it up to transfer my Outlook contacts to the iphone using itunes.
In contacts on the iphone I only see the email addresses.
Yet in Outlook I have email, snail mail and phone numbers.
I followed the knowledge document from iphone.
I did it once, didn't work so deleted all the contacts from the phone and tried again. Same result. I have a PC using Windows 7 64 bit.

You can't access an Exchange account via ActiveSync with the Address Book and iCal on your Mac.
You can access a MM account with Outlook on your PC at work and keep your MM email account server stored mailboxes synced between your PC at work, your iPhone, and the MM "cloud". Not sure about syncing MM contact info and calendar events with Outlook at the same time with an Exchange account.
This will not provide for syncing your Exchange account contact info and calendar events with the Addresss Book and iCal on your Mac because the accounts are separate.
You can access an Exchange account and a MM account at the same time with the iPhone's mail client, and sync contact info and calendar events over the air with both accounts at the same time. You can view combined contact info or separately for each account, and the same for calendar events.

I need a Sample Code about flash++.h and swc.

hi,help me !
i need a Sample Code about flash++.h and swc.
my Sample Code bitmapdata.cpp:
#include <AS3/AS3.h>
#include <Flash++.h>
using namespace AS3::ui;
void gettpoint() __attribute__((used,
annotate(“as3sig:public function gettpoint(x:Number,y:Number):uint”),
annotate(“as3package:MyLibrary”)));
void gettpoint()
double xx;
double yy;
inline_as3( “%0 = x;%1 = y\n” : “=r”(xx) : “r”(yy) );
flash::geom::Point p=flash::geom::Point::_new();
AS3_Return(xx);
int main()
AS3_GoAsync();
return 0;
the compile command is “$(FLASCC)/usr/bin/g++” $(BASE_CFLAGS) -O4 bitmapdata.cpp -emit-swc=MyLibrary -o bitmapdata.swc -lFlash++ -lAS3++
It took me ten minutes to compile，but it can’t work.why?

Compiling a SWC using Flash++ will result in poor compiler performance if you are using the Flex SDK to compile that SWC into a SWF.
To get better performance try using the new version of mxmlc that is shipped in the Adobe Gaming SDK. (Note that this new version of mxmlc doesn't support Flex)
You will need to install the Gaming SDK and then extract the archive in the "AIR SDK" folder. Once that archive is extracted you'll notice the new mxmlc compiler in the bin folder.
Unfortunately compiling a SWF seems to be a little tricky. You'll notice in the sample Makefile below project that it changes directory into the bin folder before calling ./mxmlc. Ideally you wouldn't need to do this (like how it worked with the Flex mxmlc). I'll investigate why that is the case.
Makefile:
# Path to your FlasCC SDK folder
$?FLASCC=/Users/stshongr/builds/alchemy/1.0.0/sdk
$?GAMINGSDK="/Applications/Adobe Gaming SDK 1.0/AIR SDK/air3-5_p4_sdk_asc2_mac_112112/bin"
# The folder the source files are in
$?SRC_FOLDER=$(PWD)
all:
          "$(FLASCC)/usr/bin/g++" MyLibrary.c -emit-swc=MyLibrary -o MyLibrary.swc -lFlash++ -lAS3++
          cd $(GAMINGSDK) && ./mxmlc -library-path=$(SRC_FOLDER)/MyLibrary.swc $(SRC_FOLDER)/demo.as -o $(SRC_FOLDER)/demo.swf
clean:
          rm -f *.swf *.swc *.bc *.exe
MyLibrary.c:
#include <AS3/AS3.h>
#include <Flash++.h>
using namespace AS3::ui;
void gettpoint() __attribute__((used,
                                annotate("as3sig:public function gettpoint(x:Number,y:Number):uint"),
                                annotate("as3package:MyLibrary")));
void gettpoint()
    double xx;
    double yy;
    inline_as3( "%0 = x;%1 = y\n" : "=r"(xx) : "r"(yy) );
    flash::geom::Point p=flash::geom::Point::_new();
    AS3_Return(xx);
int main()
    AS3_GoAsync();
    return 0;
demo.as:
package {
    import flash.display.Sprite;
    import flash.text.TextField;
          import flash.events.Event;
    import MyLibrary.CModule;
    public class demo extends Sprite {
                    private var tf:TextField;
        public function demo() {
            addEventListener(Event.ADDED_TO_STAGE, initCode);
        private function initCode(e:Event):void {
            tf = new TextField();
            addChild(tf);
            // start the FlasCC library
            MyLibrary.CModule.startAsync(this);
            // call the function
                              tf.appendText("OUTPUT:" + MyLibrary.gettpoint(2,2));

Need help to Settings Apple iMAC 2012 and HP LaserJet 1100.

Need help to Settings Apple iMAC 2012 and HP LaserJet 1100.
I purchased a imac, 2012, before there was Windows 7. I have the HP LaserJet 1100 and Print Servers Trendnet TE100 P21, with Windows 7 it worked, but with MAC OSX 10.8 does not want to, do not go printing. Could help with the setting?
Нужна помощь в настроке Apple iMAC 2012 и HP LaserJet 1100.
Я купил imac 2012, до этого был Windows 7. У меня есть принтер HP LaserJet 1100 и принтсервер Trendnet TE100 P21, с Windows 7 все работало, но с MAC OSX 10.8 работать не хочет, не идет печать. Могли бы помочь с настройкой?

привет Roman,
Mac OS X: About the Reset Printing System feature ...
http://support.apple.com/kb/HT1341?viewlocale=en_US
10.5/10.6/10.7/10.8 instructions...
In System Preferences>Fax & Print, Right click or Control+click on the Printers list Sidebar, choose Reset Printing System.
if you hold option and click the "-" tab it resets the printing system.
http://www.macosxhints.com/article.php?story=20031215144430486
Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
Any devices that previously appeared in your Printer List and Fax List will need to be added again after resetting the printing system.
Resetting the printing system in Mac OS X 10.5.x+++
    1.    To use the Reset Printing System feature in Mac OS X 10.5.x, follow these steps:
    2.    Choose System Preferences from the Apple menu.
    3.    Choose Print & Fax from the View menu.
    4.    Control-click on list of printers on the left side of the window, then choose "Reset printing system" from the contextual menu. If you don't see a list of printers, Control-click on the text "Click + to add a printer or fax" and select "Reset printing system..."       As an alternative, if you currently have one or more printers listed, you can Option-click the "-" (Remove printer) button.
http://support.apple.com/kb/ht1341
Reboot.
Mac OS X: О сброса системы Печать ...
http://support.apple.com/kb/HT1341?viewlocale=en_US
10.5/10.6/10.7/10.8 инструкции ...
В System Preferences> Печать и факс, правой кнопкой мыши или Control + Click на боковой панели списка принтеров, выберите Сброс системы печати.
если вы держите опцию и нажмите кнопку "-" на вкладке он сбрасывает систему печати.
http://www.macosxhints.com/article.php?story=20031215144430486
Безопасная загрузка с HD, (Удержание нажатой клавиши Shift нажатой при загрузке), запустите Disk Utility в Приложения> Утилиты, затем выделите диск, нажмите на ремонт разрешения.
Любые устройства, которые ранее появились в списке принтеров и факсов список необходимо будет добавить снова после перезагрузки системы печати.
Сброс системы печати в Mac OS X 10.5.x + + +
1. Для сброса системы печати в Mac OS X 10.5.x, выполните следующие действия:
2. Выберите Системные настройки в меню Apple.
3. Выбери для печати и факса в меню Вид.
4. Управление кнопкой мыши на список принтеров в левой части окна, затем выберите "Сброс системы печати" из контекстного меню. Если вы не видите списка принтеров, управление кнопкой мыши на текст "Нажмите, чтобы добавить + принтер или факс" и выберите "Сброс системы печати ..." В качестве альтернативы, если у Вас уже есть один или несколько принтеров в списке, можно Option-нажмите кнопку "-" (Удалить принтер) кнопки.
http://support.apple.com/kb/ht1341
Перезагрузку.

I can't connect to wifi network and bluetooth on iPhone 4S. Need help. Have already rebooted everything and reset network setting

I can't connect to wifi network and bluetooth on iPhone 4S. Need help. Have already rebooted everything and reset network setting

I have the same problem; tried a phone restore, both restoring data and setting up as new phone with factory settings, reset all settings, re-boot, remove apostrophe, put in fridge, you name it!
I think there's quite a few iphone 4s users with the same problem!
I called Apple they said it's a hardware problem, but it has worked for nearly two years; they say go to the Apple store and they can provide a replacement phone for approx. £150!
I've been into the O2 shop where I bought it and they knew the problem exactly; said they had sent a few phones off for repair and had them back awith a report they cannot fix it because it's a software problem!
An assistant in the shop had the same issues; logic says it's a software problem and hopefully Apple will fix it with a patch but at the moment they seem to be avoiding everyones comments!
If anyone else has any ideas these would be appreciated?

I have tried everything I know to retrieve the iPhoto Library app. I detest this new Photo app, which obviously wasn't designed with photographers in mind. I desperately need help in retrieving the old app and have not been able to do it so far.

I have tried everything I know to retrieve the iPhoto Library app. I detest this new Photo app, which obviously wasn't designed with photographers in mind. I desperately need help in retrieving the old app and have not been able to do it so far. I have gone to my app folder and tried to update my iPhoto Library. I have gone to my trash and brought it over to my desktop and still cannot use it. Please help!

Try this fix discovered by User photosb189:
From Finder, hold down the option key on your keyboard and click on the Go menu at the top of the screen
Select Library from the drop down menu
Then navigate to Application Support > iLifeAssetManagement > assets
Right click on the 'sub' folder and choose Compress
Drag the resulting zip file to your Desktop (as a backup)
Go to your System Preferences and choose iCloud
Turn OFF the iCloud Photos option
Go back to Library > Application Support and DELETE the iLifeAssetManagement folder
Now, in System Preferences, turn the iCloud Photos option ON
iPhoto should now be able to launch. Give it enough time to re-download your Photo Stream content. if you are missing any of your My Photo Stream photos (more than 30 days old), unzip the sub folder on your desktop and drag that into iPhoto.

Can't load Netflix - Firefox says something about cookie problem and recommends try again button. ("The page isn't redirecting properly Firefox has detected tha

Can't load Netflix - Firefox says something about cookie problem and recommends try again button. ("The page isn't redirecting properly Firefox has detected that the server is redirecting the request for this address in a way that will never complete. This problem can sometimes be caused by disabling or refusing to accept cookies.)" Hit the try again button repeated ly - nothing???

I decided to give Netflix a call about this problem.
On a recording while waiting for a support rep, it said if you're having problems logging in to go to:
http://www.netflix.com/clearcookies
It works for me. Now I have to logon everytime I go to their site though versus it had kept me already logged in before this problem.
I will be using that link to get to their site until they get it fixed.

I Need help. I Change My Number and now imessage don t work.

I Need help. I Change My Number and now imessage don t work.

Hi Ivonka88,
Here are some steps to try troubleshooting your issue with, depending on your specific symptoms:
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
Cheers!
- Ari

I need help, pop up about Certificate Problems and facebook wont work

Similar Messages

Maybe you are looking for