I need help Publishing From i web to Anther web hosting site

Hello,
i am .Mac Member and been using iWeb for my personal
Have Small business i did create new site for it on i web
Now how i Publish it ?
can i keep publishing my personal on .Mac?
and publish my business site ONLY to Differnt hosting

To use different hosting than .Mac, you publish your site to a folder and upload via ftp. Here are some tips:
http://homepage.mac.com/thgewecke/iwebserver.html

Similar Messages

Need help getting from 10.5.8 to 10.6.

need help getting from 10.5.8 to 10.6. i know i'm late to the game!

If you are not sure of what you are doing,If you are worried about losing anything when doing a major systems upgrade/update,
Before embarking on a major OS upgrade, it would be wise, advisable and very prudent if you backup your current system to an external connected and Mac formatted Flash drive OR externally connected USB, Thunderbolt or FireWire 800, Mac formatted hard drive. Then, use either OS X Time Machine app to backup your entire system to the external drive OR purchase, install and use a data cloning app, like CarbonCopyCloner or SuperDuper, to make an exact and bootable copy (clone) of your entire Mac's internal hard drive. This step is really needed in case something goes wrong with the install of the new OS or you simply do not like the new OS, you have a very easy way/procedure to return your Mac to its former working state.
Older version of CarbonCopyCloner found here.
http://mac.filehorse.com/download-carbon-copy-cloner/2734/
Older versions of SuperDuper can be found on the SuperDuper Website and Homepage.
http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html
Then, determine if your Mac meets ALL minimum system install requirements.
Mac OS X v10.6 Snow Leopard system requirements
Purchased Installer disc here.
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
To install Snow Leopard for the first time, you must have a Mac with:
An Intel processor
An internal or external DVD drive, or DVD or CD Sharing
At least 1 GB of RAM (additional RAM is recommended)
A built-in display or a display connected to an Apple-supplied video card supported by your computer
At least 5 GB of disk space available, or 7 GB of disk space if you install the developer tools.
In addition, see this discussion for more relevant info that you may need if you have any other questions or issues.
Snow Leopard upgrade - keeps Photoshop?

Need Help in the installation of p6 v7 web access on weblogic

Hello all
i have a problem and i need help .. when i installed the Web Access on web-logic the state of the deployed application is failed i've installed it several times and the state is still failed
i checked the configuration on page 160 on the admin guide and i did everything as stated in the guide
i don't know what is the problem can any body help me
thanks alot
Edited by: 796239 on Oct 13, 2010 1:25 AM

Hello Lin,
I am not able to understand anything from the error message which you have pasted. But I have successfully deployed the primavera web access for company.
I have written down the steps properly using some images also for my future reference in a M.S. Word document.
If you want I can send the document to you which I am sure will help you. You let me know your mail id.
Regards
Hawker

Need help publishing a php script

I am reading the book Dreamweaver CS5 with PHP training from the source and I have reached page 247. I want to publish a registration field to my site, but I have encountered a problem I cannot solve. The file path in library works fine on the local testing server since it has access to my user folder. When I am uploading the site to my remote server, i can't seem to find the right file path at the beginning of library.php
The code looks like this now
<?php
$library = '/home/1/r/rentsch/Scripts/php_library/ZendFramework/library';
When I press the register button on the page I get this message:
Warning: include_once(Zend/Validate/Stringlength.php) [function.include-once]: failed to open stream:
No such file or directory in /home/1/r/rentsch/Scripts/php_library/ZendFramework/library/Zend/Loader.php
on line 146
Warning: include_once() [function.include]: Failed opening
'Zend/Validate/Stringlength.php' for inclusion
(include_path='.:/usr/local/php5-suphp/lib/php:/home/1/r/rentsch/Scripts/php_library/ZendFramework/library')
in /home/1/r/rentsch/Scripts/php_library/ZendFramework/library/Zend/Loader.php
on line 146
Fatal error: Class 'Zend_Validate_Stringlength' not found in /home/1/r/rentsch/www/fredrik/Seterpaintball/zend_filer/user_registration.php
on line 16
Before I had that file path I got this message:
Warning: require_once(Zend/Loader/Autoloader.php) [function.require-once]: failed to open stream:
No such file or directory in /home/1/r/rentsch/www/fredrik/Seterpaintball/zend_filer/library.php
on line 4
Fatal error: require_once() [function.require]: Failed opening required
'Zend/Loader/Autoloader.php'
(include_path='.:/usr/local/php5-suphp/lib/php:rentsch/Scripts/php_library/ZendFramework/library')
in /home/1/r/rentsch/www/fredrik/Seterpaintball/zend_filer/library.php
on line 4
I am renting a server from domainnameshop.com (in norway)
And the page I am trying to upload to is www.rentsch.no/fredrik/Seterpaintball/registrer.php
It is on norwegian, but it is the button that sais registrer that triggers the errors.
I really need help on this, I can't find any solution on my own!

I am reading the book Dreamweaver CS5 with PHP training from the source and I have reached page 247. I want to publish a registration field to my site, but I have encountered a problem I cannot solve. The file path in library works fine on the local testing server since it has access to my user folder. When I am uploading the site to my remote server, i can't seem to find the right file path at the beginning of library.php
The code looks like this now
<?php
$library = '/home/1/r/rentsch/Scripts/php_library/ZendFramework/library';
When I press the register button on the page I get this message:
Warning: include_once(Zend/Validate/Stringlength.php) [function.include-once]: failed to open stream:
No such file or directory in /home/1/r/rentsch/Scripts/php_library/ZendFramework/library/Zend/Loader.php
on line 146
Warning: include_once() [function.include]: Failed opening
'Zend/Validate/Stringlength.php' for inclusion
(include_path='.:/usr/local/php5-suphp/lib/php:/home/1/r/rentsch/Scripts/php_library/ZendFramework/library')
in /home/1/r/rentsch/Scripts/php_library/ZendFramework/library/Zend/Loader.php
on line 146
Fatal error: Class 'Zend_Validate_Stringlength' not found in /home/1/r/rentsch/www/fredrik/Seterpaintball/zend_filer/user_registration.php
on line 16
Before I had that file path I got this message:
Warning: require_once(Zend/Loader/Autoloader.php) [function.require-once]: failed to open stream:
No such file or directory in /home/1/r/rentsch/www/fredrik/Seterpaintball/zend_filer/library.php
on line 4
Fatal error: require_once() [function.require]: Failed opening required
'Zend/Loader/Autoloader.php'
(include_path='.:/usr/local/php5-suphp/lib/php:rentsch/Scripts/php_library/ZendFramework/library')
in /home/1/r/rentsch/www/fredrik/Seterpaintball/zend_filer/library.php
on line 4
I am renting a server from domainnameshop.com (in norway)
And the page I am trying to upload to is www.rentsch.no/fredrik/Seterpaintball/registrer.php
It is on norwegian, but it is the button that sais registrer that triggers the errors.
I really need help on this, I can't find any solution on my own!

Need help in reporting of protected resources in web application

Hi,
I am using form based authentication for viewing protected resources of my web application. By j_security_check, it authenticates the user and if authentication is successful, then user can view protected resources of the site.
Now I want to generate a report of which protected resources are accessed by which user along with its timestamp.
Now my question is can I generate this report by j_security_check. I am not sure how should I call my ReportingDAO from web tier as with j_security_check the whole authentication is done by container itself.
Thanks

This is what I have done for form based authentication...
<security-constraint>
      <display-name>Example Security Constraint</display-name>
      <web-resource-collection>
         <web-resource-name>Protected Area</web-resource-name>
      
      <url-pattern>/pdfs/*</url-pattern>
      
      <http-method>DELETE</http-method>
         <http-method>GET</http-method>
         <http-method>POST</http-method>
      <http-method>PUT</http-method>
      </web-resource-collection>
      <auth-constraint>
         
         <role-name>manager</role-name>
         <role-name>user</role-name>
      <role-name>admin</role-name>
      </auth-constraint>
    </security-constraint>
    
    <login-config>
      <auth-method>FORM</auth-method>
      <realm-name>Example Form-Based Authentication Area</realm-name>
      <form-login-config>
        <form-login-page>/registration/login.jsp</form-login-page>
        <form-error-page>/registration/login_error.jsp</form-error-page>
      </form-login-config>
    </login-config>Now, if user is not authenticated, login page opens. In login.jsp, I have a form whose action I have set to j_security_check. Form fields are j_user_name and j_password.
<filter>
    <filter-name>LoginFilter</filter-name>
    <filter-class>com.filters.LoginFilter</filter-class>
    </filter>
<filter-mapping>
    <filter-name>LoginFilter</filter-name>
    <url-pattern>/j_security_check</url-pattern>
    <dispatcher>REQUEST</dispatcher>
    <dispatcher>FORWARD</dispatcher>
</filter-mapping>I mapped a login filter with the url pattern /j_security_check. So from login.jsp, when user submits the login page, Login filter should be called.
I don't know why my LoginFilter is not called? Filter gets called only when I change url-pattern of LoginFilter to /pdfs/* (i.e., same as the url patter n of the protected resource)
Can anyone please help me in this regard
I am deploying my web application on tomcat. Is it a bug of tomcat?
Thanks

Need help converting from 4.0 to 2011

hello,
Need help converting files from 4.0 to 2011.
thank you
Solved!
Go to Solution.
Attachments:
noise source.vi ‏73 KB
8673D.vi ‏30 KB
8970 FREQ.vi ‏26 KB

attached as 8.2, which you can open
missing some subVIs - not sure if you already have them
Attachments:
8673D.vi ‏13 KB
8970 FREQ.vi ‏11 KB
noise source.vi ‏24 KB

Need help changing from CC package to Photoshop only

I purchased CC membership for one year in December 2013. As I hardly ever need InDesign or Illustrator, I would like to change my order to Photoshop (and Lightroom) only. I find managing my account online very confusing. Is there a number I could call? Or some other way to get rid of the software I don't need, and that I did not re-order after my one-year membership was over?

Cancel your membership or subscription | Creative Cloud
https://helpx.adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html
Phone support | Orders, returns exchanges
http://helpx.adobe.com/x-productkb/global/phone-support-orders.html
For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Creative Cloud support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html ( http://adobe.ly/19llvMN )

Can you publish from Muse to current Non-Muse BC site without overwriting whole site?

i have a current BC site, done traditional way with code editor and uploaded and live.
I'd like to publish a single Muse page to the site. If I publish from Muse, select my site's domain, and upload will I overwrite the rest of the site?
Are you able to 'mix' a Muse page and a traditional BC site? Would I publish to folder, take that and FTP to the site; would that be safer?
Just curious.. thanks

I am afraid that as of now you will not be able to publish in a folder on Bc and if you publish from Muse then indeed it will over-write the entire web site.
You can infact, export the html of the web site created via Muse and then FTP it to the BC server. You will also have to transfer the files on which the page is dependant. Safer would be to FTP and not publish to a folder on BC and link it to the web site manually.
Let us know for more clarifications.
- Abhishek Maurya

Need help how to upload a PDF to an internet site

I'm applying for jobs on my iphone 5 and some websites need me to upload a resume... I click upload and my photo album comes up! I have PDFs of my resume saved on an app but I can't work out how to upload them on the websites? Any1 know an App or solution

Duplicate post NEED HELP: HOW TO OPEN A PDF IN ESS (EMPLOYEE SELF SERVICE)
--Shiv

Need help in retrieving a varchar in a web application.

HI,
I need a urgent help in selecting a varchar column on to the web application.
Here are I am using the DB as MSSQL. I can see more than 1000 characters when I open the table in Enterprise Manager, but the same query if I excute in SQL Query Analyser, I see the result with only 256 characters. In the same way my Java application is working. In my DB table I have a column with nvarchar and I want to write to code to get that infomration of 2000characters on to the web page.
Can any one of you help me out.
You can reach me at [email protected]
Thank You
Neelima

However, the interesting thing here is that the SQL
analyzer displays the same 256 charater for the select statement...So you see 1000 using one MS tool and 256 using another tool? And neither of these have anything to do with java.
Hmmm.....to me that suggests that it has nothing to do with java.
If it was me I would start looking at my assumptions about where the data is coming from:
-Is it the same database?
-Is it the same table?
-Is it the same row?
-Is it the same field?
-Is something modifying it while I am looking at it?

[AS] Beast of a script needs help converting from Quark 8 to InDesign CS5

First off, THANK YOU for even reading this post. Here's the dilema. I work in a publishing company that used an AppleScript from Quark 8 to automate our pagination from set text we pull from our sales reps worksheets. About 8 months ago we switched fully to InDesign CS5, but have had to hold onto Quark 8 to be able to keep running our pagination. I'd like to see if the geniuses (yes, I've been trolling these forums looking to solve this myself and seen some great problems fixed) on these forums can help me figure out the proper conversion I would need to be able to leave Quark 8 in the rearview.
Here's our current code... (I warned you it was a beast)
set Ad_Props to {¬
     {Ad_Label:"SPREAD – ", Ad_Width:2.495, Ad_Height:1.62, Ad_Text_Angle:0}, ¬
     {Ad_Label:"FULL – ", Ad_Width:1.225, Ad_Height:1.62, Ad_Text_Angle:0}, ¬
     {Ad_Label:"SPREAD – ", Ad_Width:2.495, Ad_Height:1.62, Ad_Text_Angle:0}, ¬
     {Ad_Label:"JUNIOR – ", Ad_Width:0.90625, Ad_Height:1.62, Ad_Text_Angle:0}, ¬
     {Ad_Label:"1/2H – ", Ad_Width:1.225, Ad_Height:0.785, Ad_Text_Angle:0}, ¬
     {Ad_Label:"1/2V – ", Ad_Width:0.5875, Ad_Height:1.62, Ad_Text_Angle:90}, ¬
     {Ad_Label:"1/3V – ", Ad_Width:0.5875, Ad_Height:1.2025, Ad_Text_Angle:90}, ¬
     {Ad_Label:"1/4 – ", Ad_Width:0.5875, Ad_Height:0.785, Ad_Text_Angle:0}, ¬
     {Ad_Label:"1/4 Strip – ", Ad_Width:0.26875, Ad_Height:1.62, Ad_Text_Angle:90}, ¬
     {Ad_Label:"1/8H – ", Ad_Width:0.5875, Ad_Height:0.3675, Ad_Text_Angle:0}, ¬
     {Ad_Label:"1/8V – ", Ad_Width:0.26875, Ad_Height:0.785, Ad_Text_Angle:90}, ¬
     {Ad_Label:"Junior (GOLF) – ", Ad_Width:0.8, Ad_Height:1.62, Ad_Text_Angle:0}, ¬
     {Ad_Label:"1/3V (GOLF) – ", Ad_Width:0.375, Ad_Height:1.62, Ad_Text_Angle:90}, ¬
     {Ad_Label:"1/3sq. (GOLF) – ", Ad_Width:0.8, Ad_Height:0.785, Ad_Text_Angle:0}, ¬
     {Ad_Label:"1/6V (GOLF) – ", Ad_Width:0.375, Ad_Height:0.785, Ad_Text_Angle:90}, ¬
     {Ad_Label:"Directory Listing Only – ", Ad_Width:0.3, Ad_Height:0.3, Ad_Text_Angle:0}, ¬
     {Ad_Label:"INSERT (# in notes) – ", Ad_Width:0.3, Ad_Height:0.3, Ad_Text_Angle:0}, ¬
     {Ad_Label:"Other (See Notes) – ", Ad_Width:0.3, Ad_Height:0.3, Ad_Text_Angle:0}, ¬
     {Ad_Label:"------------ – ", Ad_Width:0.3, Ad_Height:0.3, Ad_Text_Angle:0}}
set Position_Width to number
set Position_Width to 11.375
set Position_Height to number
set Position_Height to 1.875
set Jump_Height to number
set Jump_Height to 0
set Variable_Count to number
set Variable_Count to 0
set Variable_Height to number
set Variable_Height to (1.875 + (1.62 * Variable_Count))
set Last_Ad to number
set Last_Ad to 0
tell application "QuarkXPress"
     activate
     try
          display dialog "WARNING: This version of 'Dummy Square Maker' runs much slower than the last version, a confirmation will tell you when you are finished. Please be patient." & return & return & "Make sure to have the text box selected" buttons {"Cancel", "Accept"} default button 2 with icon caution
          set ThisBox to object reference of current box
          tell story 1 of ThisBox
               set (every paragraph where it is return) to ""
               set style sheet of every text to null
               set style sheet of every text to "DUMMY TEXTS"
               repeat with i from 1 to (count of paragraphs)
                    try
                         tell paragraph i
                              set ThePage to my get_CurrentPage()
                              try
                                   if it contains " – " then
                                        set style sheet to "AD SIZE"
                                        set Ad_Size to contents
                                        set {This_Width, This_Height, this_angle} to {"", "", ""}
                                        repeat with This_Ad in Ad_Props
                                             if Ad_Size contains (Ad_Label of This_Ad) then
                                                  set This_Width to Ad_Width of This_Ad
                                                  set This_Height to Ad_Height of This_Ad
                                                  set this_angle to Ad_Text_Angle of This_Ad
                                                  exit repeat
                                             end if
                                        end repeat
                                        set Ad_Box to my Make_Box(ThePage, {1.875, 10.875, This_Height + 1.875, This_Width + 10.875}, this_angle)
                                        duplicate contents to (end of Ad_Box)
                                   else if it contains "—" then
                                        set style sheet to "AD REP/PLACEMENT"
                                        duplicate contents to (end of Ad_Box)
                                   else if it starts with "©" then
                                        set style sheet to "AD REP/PLACEMENT"
                                        delete (character 1)
                                        duplicate contents to end of Ad_Box
                                        if Position_Width ≤ 19.75 then
                                             set Jump_Height to Jump_Height + This_Height
                                             (*_________________This is where Ad Boxes Stack_________________*)
                                             if (Jump_Height ≤ 1.62) then
                                                  set origin of bounds of Ad_Box to {Position_Height, Position_Width}
                                                  set Position_Height to Position_Height + This_Height
                                                  (*_________________This is where Ad Boxes more right_________________*)
                                             else
                                                  set Position_Height to Variable_Height
                                                  (*set Position_Width to Position_Width + This_Width + 0.05*)
                                                  set Position_Width to Position_Width + Last_Ad + 0.05
                                                  set origin of bounds of Ad_Box to {Position_Height, Position_Width}
                                                  set Jump_Height to This_Height
                                                  set Position_Height to Variable_Height + This_Height
                                             end if
                                             set Last_Ad to This_Width
                                             (*_________________This is where New Row appears_________________*)
                                        else
                                             set Position_Width to 11.375
                                             set Variable_Count to Variable_Count + 1
                                             set Variable_Height to (1.875 + (1.62 * Variable_Count))
                                             set Position_Height to Variable_Height
                                             set origin of bounds of Ad_Box to {Position_Height, Position_Width}
                                             set Position_Height to Position_Height + This_Height
                                             set Jump_Height to This_Height
                                             set Last_Ad to This_Width
                                        end if
                                   else
                                        duplicate contents to (end of Ad_Box)
                                   end if
                              end try
                         end tell
                    on error errmsg number errnum
                         display dialog "There has been an error " & "[" & i & "] (" & errmsg & " [" & errnum & "])" buttons {"Okay"} default button 1 with icon stop
                    end try
               end repeat
               delete contents
               set style sheet of every text to null
          end tell
          beep 2
          display dialog "Automation Finished" & return & return & "IMPORTANT NOTE: Color your Ad Squares according to Sales Rep, and select them all and 'BRING TO FRONT [F5]', this is VITAL." buttons {"Okay"} default button 1 with icon stop
     on error errmsg number errnum
          beep 3
          if errnum ≠ -128 then
               beep
               display dialog errmsg & " [" & errnum & "]" buttons {"OK"} default button 1 with icon stop
          end if
     end try
end tell
on Make_Box(ThePage, TheBounds, this_angle)
     local ThePage, TheBounds, this_angle
     tell application "QuarkXPress"
          tell page ThePage of document 1
               set Ad_Box to make new text box at end with properties {bounds:TheBounds, vertical justification:centered, color:"Rep_Other", shade:100, opacity:10, text angle:this_angle, frame:{style:solid line, color:"Black", shade:60, width:0.1}}
          end tell
     end tell
     (*end tell*)
     return Ad_Box
end Make_Box
on get_CurrentPage()
     tell application "QuarkXPress"
          tell document 1
               return page number of current page
          end tell
     end tell
end get_CurrentPage

Hi,
I think with this, you can already make good progress in your work.
Good luck!
global mydocument
tell application "Adobe InDesign CS5.5"
     set mydocument to active document
     tell mydocument
          set myParaStyle to paragraph style "DUMMY TEXTS"
          tell page 1
               set TheBounds to {0, 0, 20, 50}
               set Ad_Box to make text frame
               tell Ad_Box
                    set geometric bounds to TheBounds
                    set vertical justification of text frame preferences to center align
                    set contents to "This is the contents"
               end tell
               set myStory to parent story of Ad_Box
               set applied paragraph style of every paragraph of myStory to myParaStyle
          end tell
     end tell
end tell
Your two handlers then look like this:
on Make_Box(ThePage, TheBounds, this_angle)
     local ThePage, TheBounds, this_angle
     tell application "Adobe InDesign CS5.5"
          tell page ThePage of mydocument
               set Ad_Box to make text frame
               tell Ad_Box
                    set geometric bounds to TheBounds
                    set vertical justification of text frame preferences to center align
               end tell
          end tell
     end tell
     return Ad_Box
end Make_Box
on get_CurrentPage(CurrentTextFrame)
     tell application "Adobe InDesign CS5.5"
          tell mydocument
               return name of parent page of parent page of CurrentTextFrame
          end tell
     end tell
end get_CurrentPage
Shorter version:
on get_CurrentPage(CurrentTextFrame)
     tell mydocument of application "Adobe InDesign CS5.5"
          return name of parent page of parent page of CurrentTextFrame
     end tell
end get_CurrentPage
Ce message a été modifié par: OlivierBerquin

Need help writing client for WSE 1.0 Web Service

Hello all,
I am attempting to write Java clients against a .Net service that uses WSE 1.0. I can't seem to get any of toolkits I have tried to work with this service. Unfounately, I do not own the service, so I cannot upgrade it to WSE 2.0. The problem seems to be that the WSE 1.0 expects namespaces from the July 2002 version of WS-Security, while all the libraries I have tried (JWSDP, Oracle Web Service Wizard, etc) use the oasis namepsace from January 2004.
Can he one suggest an alternative? Is there a way to set the namespace sent in XWS-Security? I think this might solve the problem...
Thanks,
KS

Hi,
firstly JWSDP 1.5 is pretty old, the latest release of JWSDP is JWSDP 2.0 that happened late last year.
The problem is most likely happening due to a bug in JWSDP 1.5. If you dump the Message that is going over the wire you will probably see
SOAPAction : ""
SOAPAction : "<the correct action value>"
And this is the reason for the failure. I believe you are using SOAP 1.1 messages right ?
What you will need to do is upgrade to
JWSDP 2.0 and more important also upgrade your SAAJ jars in the JWSDP installation to SAAJ 1.3
https://saaj.dev.java.net/files/documents/52/32730/saaj1.3.zip
Alternatively, you can use Sun's Project Tango (Sun's Next Generation WebServices Interoperability Technology Offering) which has been tested to interoperate with Microsoft WCF.
http://java.sun.com/developer/technicalArticles/glassfish/ProjectTango/
You can download Project Tango by visiting the following page :
https://wsit.dev.java.net/
Look at the Try It section for instructions on how to use it.
Using the Netbeans Plugin you can develop a java client which can securely communicate with the .Net WebService. All you need to do for that is use Netbeans to create a Java WebService Client by pointing it to the WSDL of the .Net Service.
Let us know if this helped.
Thanks...
Message was edited by:
kumar_at_sun

I need help understanding export options and optimizing for web

I have been using FCP X for a short while now and have a pretty good grasp on the editing capabilities. What I'm having a horrible time figuring out is the export/share options. The videos I create are typically approximately 1 minute in length and get posted to a web site (we have our own CMS and video player so I'm not using YouTube or Vimeo or anything like that). In order to post them I need them to be MP4s and then I have to create .webm and .ogv files. The source material I work with is generally great, high quality stuff, so I end up with very large output files from the initial FCP share master file options.
When I use MPEG Streamclip to make my MP4s I end up with files that are still quite large and I can't seem to ever get the file size manageable without losing tons of quality. I do not have Compressor, though if that will solve my problem I will put in for the expense of it. What I'm trying to understand is what sorts of settings I should be trying out to get my file sizes to be manageable without completely compromising my quality. And I know this can be done, because the company I work for pays for a great quantity of video work each year (from an outside production firm) and the clips provided are beautiful in quality and small in file size -- for example, I recently worked on a video and got it into the 40MB range before quality went to crap, working off the same material the production company we do work with had theirs down into the teens and looking beautiful!
To throw an even greater wrench in the works, I am working off a mac. But when my boss, on a pc, saves the mp4s I create (raw files -- not what is posted to the web) locally on his machine and views them from there the sound is always off a tad and the people in the videos look like they're lip synching.
Any advice on either of these is MUCH appreciated. I've been trying to figure this out properly for months, and only today decided to stop seeing if someone else had the same question and just post my own.
Bronwyn

Thank you Karsten, this was helpful I have utilized the Quality slider and the frame size options before though with limited results. I've never messed with the Limit Date Rate option as I don't know what I'm doing with it, I see you put 5Mbps. Is that a typical setting that I could use?
Using stream info, here's info on my original source file:
Stream: Charles_0023_2.mov
Duration: 0:00:51
Data Size: 96.51 MB
Bit Rate: 15.77 Mbps
Video Tracks:
H.264, 1920 × 1080, 29.97 fps, 15.64 Mbps
Audio Tracks:
MPEG-4 Audio stereo, 48 kHz, 127 kbps
Stream Files:
Charles_0023_2.mov (96.51 MB)
As a comparison, here's the info on a similar clip that the company we sometimes use created:
Stream: Charles_0019_4.mp4
Duration: 0:00:49
Data Size: 4.66 MB
Bit Rate: 0.80 Mbps
Video Tracks:
JVT/AVC Coding, 710 × 400, 29.97 fps, 635 kbps
Audio Tracks:
MPEG-4 Audio stereo, 48 kHz, 162 kbps
Stream Files:
Charles_0019_4.mp4 (4.66 MB)
I'm fine with bringing the frame size down some and modifying the limit data rate, but sometimes I feel like I'm forcing my video into something it's not and the quality suffers -- this is where my understanding of video work breaks down LOL. Any suggestions of how I can get my .mov into something like the the .mp4 above?
Also have you had any experience with mp4s not playing back properly on pcs?
Again, thank you!
Bronwyn

Need HELP passing raw SOAP to JAX-RPC Web Service

Ive recently downloaded the web services development kit from the SUN site and have got all the examples to work fine.
What I am now trying to do is pass RAW SOAP to the HelloWorld JAX-RPC example,
Ive managed to get the service to call the sayHello function with no params which returns 'Hello NULL'.
I can't however get any parameters to be passed to the sayHello function,
Below is the existing SOAP ive got calling the function with no params.
<?xml version="1.0"?>
<soap:Envelope soap:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/"><soap:Body><sayHello xmlns="http://hello.org/wsdl">????????????</sayHello></soap:Body></soap:Envelope>
If anybody could tell me what I need to replace ???????????? with then I would be more than gratefull.
P.s If I changed the webservice to accept multiple arguments what would I need to put in my SOAP?
Yours,
Cris.

Thanks for your help on this one. However there is still one thing I don`t understand.
In the example SOAP I posted on the orignal message I have added the namespace ns1 pointing to
http://hello.org/wsdl
The example you posted goes to http://caller.org/wsdl
below is SOAP you posted for me.
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:enc="http://schemas.xmlsoap.org/soap/encoding/"
xmlns:ns0="http://caller.org/wsdl"
env:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
<env:Body>
<ns0:sayHello>
<String_1 xsi:type="xsd:string">some text</String_1>
</ns0:sayHello>
</env:Body>
</env:Envelope>
This returns me an error! However If I change ns0 to point to http://hello.org/wsdl it all works perfectly.....
If you open a browser and go to http://hello.org/wsdl OR http://caller.org/wsdl neither URL points to anything!!!!!!! All the other namespaces used point to valid XML Schemas, which makes sense.
So how can this SOAP message work if the namespace ns0 is nothing???????????
Yours,
Cris.

Need help w/BW user authorization to see Web Templates thru portal

Hello,
We have designed Web Templates in BW which we intend to use through the SAP Portal. When these web templates are accessed via a URL which also passes a generic CPIC UserID/Password (created on the BW server), the template is fully functional and does not prompt the user for any further authentication. When we try to call up this same URL via the portal (including the CPIC User ID and password information), the report under /sap/bw/BEx comes up fine, but we are prompted for logins for nearly every object under the /MIME/ repository called by the Web Template. We have already set the /sap/bw/BEx/MIME service (ICF) to be an anonymous service (using the same UserID and Password that we are passing in the URL). So, to me it seems like additional role needs to be assigned to this user. Any ideas?
Here is the error message we get:
Logon failed
What has happened?
Call of URL http://xxxxxxxx:8002/sap/bw/Mime/BEx/JavaScript/epcfproxy.js terminated due to error in logon data.
Note
Logon performed in system T04 .
Logon performed for client 020, user , and language EN.
What can I do?
Check that you have entered the client, user, and password correctly.
If you do not yet have a user ID, contact your system administrator.
Error Code: ICF-LE-http-c:020-l:E-T:1-C:6-U:-P:-L:4
HTTP 401 - Unauthorized
Your SAP Internet Communication Framework Team
Thanks in advance for your help!
Regards,
Abu Sadeq

Hi abu,
DId you solved your problem. if yes please help me. i am facing the same issue
Thanks
Sarang

I need help Publishing From i web to Anther web hosting site

Similar Messages

Maybe you are looking for