I need help quick rented movie froze

I just rented a movie on my iPod touch, started watching it and about 15 minuter into it, it froze. The time line keeps going however the picture is frozen. The download was successful (I'm pretty sure), I've tried skipping over, quitting other apps, and resetting iPod! But still freezes at same spot. any ideas? Also I was wondering how long iTunes rentals are for, when will they expire? -Thanks

- Have you trie resetting the iPod:
Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
How long do I have to watch a rented movie?
You have 30 days from the time of rental to watch your movie, and 24 hours (in the US) or 48 hours (elsewhere) after you've started viewing to finish it. Once the rental period expires, the movie will disappear from your iTunes library.
Above from:
http://support.apple.com/kb/HT1657
If the problem persists report the issue to iTunes and rquest a redownload.
How to report an issue with Your iTunes Store purchase

Similar Messages

  • Need help with rented movies and Apple TV

    I rented two movies from the iTunes Store from my laptop rather than my Apple TV. I cannot get the rented movies to show up on my Apple TV. I've tried to "move" the two movies from my laptop to Apple TV via the Apple TV tab in iTunes where it shows both movies under a "Rented Movies" section and gives me the option to "move" each one to my Apple TV, but when I click on each movie to move it to the Apple TV and then hit "Apply," nothing happens (at least as far as I can tell). Is there someplace special I need to find rented movies using my Apple TV remote? I clearly need help, please!

    Hi Winston,
    I have purchased the third generation of Apple TV but have not installed it yet, so I am still using my second generation Apple TV, for which I posed this question. Is the answer different when using Apple TV II?

  • HT1657 Rented movie froze

    My rented movie froze 1/3 of the way in and will now longer play beyond that point, how do I fix it?

    I'd report the problem to the iTunes Store. 
    Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
    Find the item that is not playing properly. If you can't see "Report a Problem" next to the item, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.

  • Imessage won't send, nor receive! Need help quick

    I contacted apple and they told me to call sprint and have the re store the settings or something along those lines. I've tried everything from hard resetting to turning wifi on and off. I need help quick nothing is working and I need to stay in touch! Thank you

    travis142 wrote:
    Yeah, Sprint was not available. I would like imessage to be working by the end of the night.
    Try turning iMessage off, and then turn it back on again...
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    troubleshoot iMessage activation

  • Can't activate iPad after getting it from repair. Need help quick!

    I recently broke the screen of my iPad but the hardware was working very well. Today I got it back from the repair service I gave it to (not Apple store), and when I turn on the iPad, it tells me to activate the iPad using my Apple ID, I enter all my info correctly, but it doesn't unlock. Did they give me a wrong iPad, did I get scammed? Please I need help quickly since I will be leaving the town after 3 days. Thanks for any help

    Do you have the serial number of the iPad you purchased & sent in for repair? If so, look on the back/bottom of the iPad to see the serial number of the iPad you have. Does it match?
     Cheers, Tom

  • I need help quick please sold the iPod and before handing it over wanted to clear out info so pushed erase now there is only a plug icon for iTunes but it won't now recognize my computer what can I do??

    I need help quick please sold the iPod and before handing it over wanted to clear out info so pushed erase now there is only a plug icon for iTunes but it won't now recognize my computer what can I do??

    Try
    iOS: Device not recognized in iTunes for Windows
    or
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

  • HT5622 I need help finding a movie that I downloaded, can anyone help me with this?

    Hello, I need help finding a movie that I downloaded, can anyone help me with this?

    If you downloaded it to your iTunes library it will be in the Movies folder.  If you downloaded it to an iOS device you will find it in the Videos app.  This explains how to redownload previously purchased videos (available in some locations as long as the studio permits it): http://support.apple.com/kb/PH12283.

  • Need help quickly as possible for the error 0xc004c008

    hi,i have lenovo ideapad z580 laptop with windows 8 pre-installed still within the warranty period but after doing one key recovery for the second time an activation error appear as following "the product key is already being used on another pc,try
    a different key or buy new one" with the following error code "0xc004c008" and i have contacted lenovo they gave me new product key but also the problem still exist and also one of my friends have a look at the laptop and told me that to go
    to lenovo and have a new windows 8 installed on the laptop but i am really confused and don't know what should i do? . So,please i am really need help quickly and thanks in advance 

    Well, there's enough time, so if you start the ball rolling with your code then people will help - but you have to do the work. We won't do your homework...

  • Ok guys i need help my ipod touch froze during an update now i put it inot the recovery mode or dfu and it will not reset itself at all it comes up with an error code and says this ipod cannot reset now does anyone have any ideas of what to do with it

    ok guys i need help anyone with my ipod it froze during an update now it will not work at all i ahve put it into the recovery mode or dfu and  it will not reset it self it comes up with an error message 1603 the number is and says the ipod cannot be reset anyone please help me i have tryed everything googled you tubed everything

    Error 1604
    This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
    If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
    Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
    Restore and wait for the error.
    When prompted, click OK.
    Close and reopen iTunes while the device remains connected.
    The device should now be recognized in Recovery Mode again.
    Try to restore again.
    If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
    Error 1600, 1601, 1602
    Error 1603
    Follow the steps listed above for Error 1604. Also, discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.If you do not want to remove the IPSW in the original user, try restoring in a new administrator user. If the issue remains, Eliminate third-party security software conflicts.

  • Problem burning DVDs, NEED HELP QUICK

    Hey,
    I need help as soon as possible. I am using iMovieHD 5.0.2, along with iDVD 5.0.1. I have made a movie about 8 minutes long and all in all it totals 7.68Gigs, and i've tried burning it to a dvd. I did all the steps it says to, going to Share, sharing it with iDVD, then trying to burn it in iDVD. Yet whenever it asks me to insert a recordable dvd, i do, and the computer fails to recognize it. I am using a DVD-R, 4.7GB discs, 4x. I then realized that the movie i was trying to burn was larger than this disc, which might be the problem. I then created a 200mb movie and tried, but the same problem happened. My G5 is not recognizing the blank dvds, yet when i insert a dvd that was made a while ago from a different source, yet the same type of dvd, it plays fine.
    The problem seems to be in recognizing the blank DVD, and im pretty sure that its compatible with this computer, being that it plays when theres already a movie on it.
    Can someone please help me quickly, this is for a production company and we're losing out every day that i dont get this done. Thanks a million.

    I don't have an answer, but as an initial diagnostic step, try loading a blank DVD while iDVD is not running. First open your System Preferences and select the CD/DVD icon. Make sure the options selected do not say "Ignore". Then load a blank disc. Depending on your preferences, you should get some sort of reaction - either a burn window opens or you get a prompt asking you what to do. If there's no reaction from the Finder, it would indicate that the drive is not recognizing the blank DVD. This would be either a hardware or a media compatibility problem. Only way to tell for sure is to run out and try a different brand of media.
    - Andy
    PowerMac G5 dual 2.5   Mac OS X (10.4.4)  

  • More cables needed to run Rented Movies

    I was pretty excited about the Apple update and rented my first movie this past Saturday afternoon. That evening I came home, sat down with my favorite beverage, some snacks and hit "Play Now" only to get a message that said something to the nature that DVI is not compatible and I need composite or component video cables. WHAT!!!! My movie would not play. I headed out to a local box store and picked up some cheap video cables, disconnected my DVI cable and I was able to watch my movie. My $3.99 movie cost me around $20.00. Can someone answer why DVI is not compatible or have I missed something in the set up. As a result of using the new cables the quality is far worse than DVI.
    Get this I can watch the trailers with the DVI and everything else with Apple TV but not a rented movie.

    My HDMI cable has to go round a corner to get around the shelf to the tv, does that mean it won't work

  • Need Help Quick to Teach Myself...

    I'm looking for some guidance.  I'm starting on a Sharepoint migration project from 2007 to 2013 soon and need to teach myself all I possibly can rather quickly.  I've been looking all over the internet to try to find free classes and tutorials.
    This is my chance to prove myself and I don't want to mess up and don't want to look stupid.  I need to be impressive here. 
    Can anyone help me find some free classes and tutuorials?  I'm an end user, but I would like to know much, much more from a web developer and business intelligence portion of Sharepoint.  Just some direction that anyone can point me in where I
    can just start and then take off quickly.  Please, please, really need help here.
    Thank you!

    Start by reading all the articles on the following web sites.  to upgrade from 2007 to 2013 you need to either use a third party tool or upgrade first to 2010 and then 2013.
    Here's a link to the Microsoft site on how to upgrade from WSS 3.0 to Foundation 2010.
    http://technet.microsoft.com/en-us/library/cc303309(v=office.14).aspx 
    and here's the site with information on how to upgrade from Foundation 2010 to Foundation 2013.
    http://technet.microsoft.com/en-us/sharepoint/fp142375.aspx
    Paul Stork SharePoint Server MVP
    Principal Architect: Blue Chip Consulting Group
    Blog: http://dontpapanic.com/blog
    Twitter: Follow @pstork
    Please remember to mark your question as "answered" if this solves your problem.

  • Got someone else's details on my iPad, need help quick

    Ok, I really need help, I work on my new iPad 3 a lot, and my contacts mean a lot to me, but today I opened up my contacts and found names and numbers that i had never seen before in my life, then I opened up the photo stream and realised some girls Random Pictures had turned up...I don't want anything to do with this other persons information. And I don't want them having the ability to access mine, as it is important and private... Why is this happening, why is someone else information merging onto my device, I need immediate help as I'm loosing valuable time. Many thanks.

    Go to settings>icloud, and make sure its your account there and not someone elses, and if possible go to icloud.com on a COMPUTER not the device and log in with your apple id, if you feel your account has been jeopardized please call in the apple support line and ask to speak with a iOS Senior advisor

  • HTML Glitch Need Help Quick!

    +*I Need Help Now on this!+*
    I tried to open an HTML file in iWeb, and of course, it couldn't open it (I Should have known)
    But now, every time I open iWeb, it says (File).html cannot be opened (and I only tried to open it
    the first time!) and then it closes!
    what can I do!!?

    Go to
    ~/Library/Application Support/iWeb/
    and open the domain file.
    Next time iWeb will remember this.
    Where ~ is your Home Directory (Cmd-Shift-H)

  • Need help quick! :3

    i dont remember my security questions so i cant get any thing in itunes. any way to reset without having to put them in? i need help fast. :3

    Security questions:
    https://discussions.apple.com/docs/DOC-4551
    http://support.apple.com/kb/HT5312
    This is also useful:
    http://www.macworld.co.uk/ipad-iphone/news/?newsid=3463233&olo=email

Maybe you are looking for