I need help regarding moving my music from pc to PalmPre+ and my amazon account. . .

Recently I had to have my Palm Pre+ replaced w/warranty. I'd backed up my stuff onto my pc. When I tried to drag & drop my music to my replacement palm, instead of it saying, 'copy to music', like it usually says, it had a circle with a line through it on some of the songs. On other songs, it seemed like the files were dragging & dropping, but when I unsynced my palm, the music wasn't on my palm. I know I was doing it correctly cuz I've done it many times before, w/out any problems. Finally, after about an hour of trying to get the music files onto my phone w/no success, I gave up.
The next day, I remembered that I'd also saved my ringtones in a separate folder. Some of the ringtones had been some of my songs, set as ringtones. I wondered if I'd be able to drag & drop the music files from that file onto my Palm, so I tried it. Oddly enough, when I checked to see if they'd made it onto my Palm, they had! The only problem is, I'd only used about 13 of my 40 or so songs as ringtones, and those are the only ones I've been able to move to my Palm.
I'm thinking it may have something to do w/the fact that, since changing to this new Palm, I'm also unable to download anymore music. I keep getting a message that there's no account & creditcard associated w/my my phone. The last time that happened, I just removed the creditcard account and readded it and it was fine. That was w/the old Palm though. This time, it's not letting me do it and I have no clue why. I sure hope someone can help me w/these problems. Thanks,  Renee

Are you upgrading from an existing iPhone? Back up old phone, then restore new phone with the cable. I had to do this a number of time to get all my purchases across.

Similar Messages

  • Please help, I moved my music from library 2my ipod, and it's not there...

    I've uploaded my music onto my library, which including converting music to a compatible format, and moved it to my ipod in iTunes. In the list everything is there. However, once I disconnect my ipod and switch it on, only 4-5 songs appear. Yet I've moved about 80 songs onto it.
    Can someone help me? I have so much music that I want to put on my 30gig ipod, but if I can't get it to work, I'm considering to return it. (Which is sad cause it was a 21st Bday pressie.)
    Any help would be much appreciated.
    Thankyou.

    Read this article http://docs.info.apple.com/article.html?artnum=301748
    If you don't want a bunch of sub-folders all you need to do is create a new Compilation and call it - mp3's or what ever - select all the tunes that you want in that Compilation from the main iTunes window - CMD-I and Compilation =Yes. All those tune will now be in on folder located in the Compilations folder of iTunes. For this to work you also need to select the 'keep' option.
    MJ

  • I Need Help Syncing All My Music From My Desktop To My IPhone 5 Helllllllllllp Please

    Hi can someone help me please I have a IPhone5 64g I need help syncing all my music from my I tunes library. I have a total of 3600 songs on my I tunes library which is 26g on my desktop all the boxes are checked on each song when I hit sync im only getting 1400 songs wich is only 10g of music I want all 26g of musicon my IPhone 5 when i hit sync all my music are not syncing and I need helping syncing all my music can someone help me please?

    Are you upgrading from an existing iPhone? Back up old phone, then restore new phone with the cable. I had to do this a number of time to get all my purchases across.

  • Need help regarding training on OWB from Oracle corp

    Hi All,
    I have 5years of exp in Oracle admin/Dev platform. Now I wanted to move on to warehouse, something new and different . So could you guys help me out how I would get a training on this. I inquired regarding Owb training program from Oracle corp, according to them its all elearing .So I am not interested on that . I am searching for classroom based training .
    Now I am based on Pune,India. I am open to Mumbai,Hyderabad,Bangalore in india. I am ready to move and attend classroom training on this . So could someone help me on that ?

    I took the OWB 5-day live virtual class and found it as good or better than being in a classroom. It basically entailed installing a vpn connection to the Oracle training system and launching the virtual desktop to do lab activities; the course materials were provided electronically before the class began (pdf), and the instructor presented the materials and demo'ed the topics via a webex-style presentation. The only drawback was the audio portion was via telephone; from my location (US) it was a toll free call, but use of a headset or speakerphone was mandatory to avoid permanent neck injury; hopefully they will get the audio online with the LVC or at least provide it as an option for those who have audio capability (mic & speakers) on the computer.

  • Need Help Regarding Time Machine Backup from Old Drive to  New Drive

    Hi All,
    I have a 250Gb hard drive which is my Time Machine Backup which is full now, so, I got another 1TB drive. Now, the problem is how can I transfer the old back from the old drive to my new drive which is empty and then continue to use the new 1TB drive as my new TM Backup.
    Please if anybody can help me really appreciate the efforts,
    Thanks In advance
    saurabh

    you can clone the old TM drive to the new one using either the restore function in disk utility or one of 3rd party cloners like CCCloner or Superduper. once the cloning is finished, select the new drive as the TM drive in TM system preferences.

  • Need Help with Playing my music from my External Drive!!!! PLEASE HELP!!!

    So here's the deal, i just recently got a new macbook pro and i have crap loads of music stored onto my external drive, i want to be able to listen to my music in itunes without having to store all of my music onto my internal hard drive and take up tons of space! HOW DO I DO THIS!!!!

    iTunes prefs -> Advanc3ed.
    Set the iTunes music folder location to the music folder on the external drive.
    Then File -> Add to library and select the music folder on the external.
    You can leave "copy music to iTunes music folder" checked so it copies new music to the external.

  • Need help regarding image scanning from scanner and resizing it...

    Hi,
    I need help regarding scanning of image directly from scanner. Here is the scenario when the person clicks scan button on the webpage should scan the image and resize it and store it in some temp location. Is there any way i can do this. Any Help regarding this would be great!!!
    Thanks,
    Avinash.
    Edited by: Kalakonda on Jul 24, 2009 8:08 AM

    Kalakonda wrote:
    I need help regarding scanning of image directly from scanner. Here is the scenario when the person clicks scan button on the webpage should scan the image and resize it and store it in some temp location. Is there any way i can do this. Any Help regarding this would be great!!!So what you are doing is you have a Scanner (hardware: like an HP flatbed scanner) attached to a server that you want to use as a scanning station? Is this the senario that you are talking about?

  • Hey guys need help regarding iTunes U. My school is moving for iOS and Mac in the classroom and I have been appointed Junior Administrator for the schools technical department and integrating these devices into the classroom.

    Hey guys need help regarding iTunes U. My school is moving for iOS and Mac in the classroom and I have been appointed Junior Administrator for the schools technical department and integrating these devices into the classroom.
    I have an appointment with a director on Tuesday. I want to demo iTunes U. Problem is I have never used it before and have no idea how to set it up and even if I should sign up.
    Please help any ideas regarding iTunes U and how I should direct the meeting tomorrow.
    Please please post here.
    Thanks
    Tiaan

    Greetings fcit@!A,
    After reviewing your post, it sounds like you are not able to select none as your payment type. I would recommend that you read this article, it may be able to help the issue.
    Why can’t I select None when I edit my Apple ID payment information? - Apple Support
    Thanks for using Apple Support Communities.
    Take care,
    Mario

  • I moved my music from the c drive to the d drive. All of my music is in itunes but my ipod won't sync with itunes. The syncing process is taking much longer than usual too. I left my ipod over night to sync and it didnt finish. Fails to sync every time.

    I moved my music from the c drive to the d drive. All of my music is in itunes but my ipod won't sync with itunes. The syncing process is taking much longer than usual too. I left my ipod over night to sync and it didnt finish. Fails to sync every time. I tried to restore my ipod and it didnt help.

    Ignore.  I figured it out:)

  • TS1382 i have a new computer -- how can I get my music from my 2 ipods and my iphone on to the new computer.  I have downloaded itunes but can't get my music from the devices to load on the computer !!!! Help ????

    Need a little help.. New computer !!!  How do I get my music from my 2 Ipods and my Iphone to the newly installed and authorized computer?????

    This user tip provides the steps how to sync your iPhone to your new computer. It should also work for your iPods too.
    https://discussions.apple.com/docs/DOC-3141

  • Need Help Regarding Enabling The Matrix

    Hi All,
    We have got one user form and we have got one choose from list and one matrix, on click of choose from list the value will be displayed in the text box and at the same time matrix should get enabled. But it;s not happening in our case. The value is coming in the text box through choose from list but matrix is not getting enabled. We are able to change the back ground color of the matrix, make first column invisible and all but not able to enable the matrix. We need help regarding this one.
    Regards,
    Jayanth

    Hey first bind the columns of matrix to any user datasource
    and then you can enter any thing into your matrix 
    following code may help
    suppose you have one column
    oForm = SBO_Application.Forms.Item("URFRM")
    oUserDataSource = oForm.DataSources.UserDataSources.Add("URDSName",
    SAPbouiCOM.BoDataType.dt_SHORT_TEXT, 20)
    oMatrix=oForm.Item("URMATRX")
    oMatrix = oItem.Specific
    oColumns = oMatrix.Columns
    oColumn = oColumns.Item("URCOLName")
    oColumn.DataBind.SetBound(True, "", "URDSName")
    oMatrix.Addrow()
    hope this will help
    additionally you can look at this sample
    .....SAP\SAP Business One SDK\Samples\COM UI\VB.NET\06.MatrixAndDataSources

  • Need Help regarding text Output

    Dear gurus.
    I need help regarding formatting of a text.
    I want to format a employee sub group text.
    im getting a text workers (7) from a table t503t having field ptext.
    i want to show only (7) in the output not the whole text how can i do this ?
    Please help
    regards
    Saad.Nisar

    DATA: BEGIN OF itab_odoe OCCURS 0,
      department_text LIKE t527x-orgtx,"Holds the short text for department
      department_no LIKE pernr-orgeh,
      pernr LIKE pernr-pernr,
      ename LIKE pernr-ename,
      grade like t503t-ptext,   "THIS AREA GET ME TEXT OF EMPLOYEE SUBGROUP"
    *  department_text LIKE t527x-orgtx,"Holds the short text for department
      current_year LIKE sy-datum,
      wt0001 LIKE q0008-betrg,"Basic Pay
      wt1101 LIKE q0008-betrg," COLA
      wt3002 LIKE p0015-betrg,"Overtime
      per_basic type p DECIMALS 2,"Overtime percentage on basic
      per_basic_sum type p decimals 2,"Overtime Sum Division
      overtime_sum LIKE p0015-betrg,"holds sum of overtime
      basic_sum like q0008-betrg,"holds sum of basic
    END OF itab_odoe.
    Im using the select statement to get the employee subgroup from the table
    select single ptext
        from t503t
        into itab_odoe-grade
        where persk eq pernr-persk
        AND SPRSL eq 'EN'.
    now in itab_odoe-grade the values comes is Workers (7) , Snr Mgt (M3)
    i want to show only the text in Brackets.

  • I need help regarding measurement of "time domain parameters of Heart rate variability" using labview.

    I need help regarding measurement of "time domain parameters of Heart rate variability" using labview.
    I am using Labview 8 ... I  need to develop a software to accquire the ECG data (simulated enironment ) and compute the time domain parameters of Heart rate variability like "SDNN, SDANN...etc". Can some 1 plllzzzz help me out.Plzz help me if u can.Thanx in advance.

    Hi Andy,
      Thanx for responding.  The input is from a text file. SDNN, SDANN,etc are  the timedomain parameters of heart rate variability.
     SDNN: the standard deviation of the NN or RR interval  i.e. the square root of variance.
    SDANN:the standard deviation of the averageNN interval calculated over short periods, usually 5 min,which is an estimate of the changes in heart rate due tocycles longer than 5 min
    SDNN index, the meanof the 5-min standard deviation of the NN intervalcalculated over 24 h,
     RMSSD: the square root ofthe mean squared differences of successive NN intervals
    NN50: the number of interval differences of successiveNN intervals greater than 50 ms, and
    pNN50 the proportionderived by dividing NN50 by the total numberof NN intervals.
    The problem is dat I am a fresher to the world of Labview. I have jus recently started working on it. Can u please suggest me some some idea as soon as possible.
      As i said  I have the ECG data in the form of text files..I need to create sort of GUI to calculate the time domain parmeters....I need help urgently. Plzzz help me if u can. If u have and .vi example to calculate the RR interval plzz send it to me ASAP.
    Thanku

  • Need Help Regarding  ibook

    em user of   iphone  3gs  os 6.1.6
    Yesterday  i restore ma  iphone
    after that  em  Unable  to   install    ibook in  ma iphone  its  say me that u  need  os 7 ...
    need help regarding this issue....   what i do  is there any alternative app  ...?

    Hey Seungly,
    I've realized that my computer runs fine UNLESS I turn the AirPort on to connect to the Internet. The moment I click "Turn AirPort On," the "You need to restart your computer" screen immediately pops up. Is there any connection between AirPort and my problem?
    That could very easily be the case, a bad Airport card. Look at this recent post:
    http://discussions.apple.com/thread.jspa?messageID=7960754&#7960754
    John diagnosed it from the panic log.
    Does yours say something similar?
    Richard

  • How do I prevent itunes from moving my music from its original place ie folders in an external drive when I play music from itunes. I have all my music in artist folders and separated by MPG3/MPG4 and FLAC folder within the artist folder.

    How do I prevent itunes from moving my music from its original place ie folders in an external drive when I play music from itunes. I have all my music in artist folders and separated by MPG3/MPG4 and FLAC folders within the artist folder and itunes moves the track/s whenever i try and load selected music to my ipod/iphone. I've tried to find some sort of preference to prevent this, but no joy? What am I missing?

    Try opening iTunes preferences. Then click on advanced tab. Then uncheck "Copy files to iTunes media folder when adding to library." By default, iTunes copies music to its own media folder when you use iTunes to play the music.

Maybe you are looking for

  • CS5 on Windows 7 64 bit and RAM

    Hi Running CS5 on a Windows 7 64 bit system with 12gb RAM. CS5 says " only 3255 mb available". Why is this? Shouldn't I be able to use all of my RAM with the 64 bit versions? need help asap please and it will be greatly appreciated thanks otto

  • Dynamic Lookup in OWB 10.1g

    Can we execute dynamic lookup in OWB 10.1g? I want update the columns of the target table, based on the previous values of the columns. Suppose there is a record in the target table with previous status and current status columns. The source table co

  • 1300 bridges trunking question

    Hi all, I have two 1300 bridges connecting two buildings. Both buildings are using native vlan. I only have one SSID and native vlan on the birdges. There is a L3 switch connecting to the root bridge and L2 switch connecting to the non-root bridge. R

  • Problems with OLE DB Apshell requested by the login during installation.

    Hi gurus, I installed SAP BPC 7.5 for Microsoft i tried to following the steps like the manual say, when i was installing showed the next message: OLE DB error: OLE DB or  ODBC SAP BusinessObjets Planning and Consolidation "ApShell" requested by the

  • Aperture 3.4 will not open on OS 10.8.2

    I have had multiple attempts failed, which are followed by a warning message to repair the library. After clicking to repair library it does so successfully and then tries to reopen Apreture, which proceeds to fail and the cycle starts over again.  W