I need help registering my i pad for e print

every time i try to register from my i pad it says cannot send email please check network connection

Same here
chico33 wrote:
every time i try to register from my i pad it says cannot send email please check network connection

Similar Messages

NEED HELP registering QuickTime 1 Pro for Windows

Let me start off by saying that I'm a total novice when it comes to computers & my new iPod. I have Windows XP and I believe I've downloaded Quick Time bla bla bla and have already purchased QT7Pro ($32.31). I have received my email confirmation along with my key. On the on-line instructions it says go to start,settings,control panel, quicktime control panel then register your key. When I click on start, there is no option for settings. There is an option for control panel (which has nothing in it remotely related to QuickTime) and there's an icon for QuickTime. When I click on that it just keeps asking me if I want to but QT 7Pro. I just spent $32.31!!!! I already have it.... help please (in layman's terms).

Open any QT document, such as the sample movie that came in the QT folder. The go to the Edit menu and choose Preferences/Registration. Click on Edit Registration and then enter the Name that is in the email from Apple and then the Key in the email. Click on OK and you should now be registered.

Need help with a activation code for Adobe Acrobat X Standard for my PC,, Don't have older version serial numbers, threw programs away, only have Adobe Acrobat X Standard, need a code to unlock program?

Need help with a activation code for Adobe Acrobat X Standard for my PC, Don't have older Version of Adobe Acrobat 9, 8 or 7.

You don't need to install the older version, you only need the serial number from your original purchase. If you don't have them to hand, did you register? If so, they should be in your Adobe account. If not you really need to contact Adobe, though it isn't clear they will be able to do anything without some proof of purchase etc.

Need Help to create new screen for RF Sapconsole

Hi Guru's
I'm new on RF (but some years in ABAP) since last week.
I need help to create new screens for RF (SAPLLMOB).
Can someone explain me the procedure to create screen (with ABAP code after) or perhaps someone have an exemple (simple or not) ?
I have to develop 2 new screens with really few time.
And, another subsidiary question :
how SAP can transfert information between the flash gun and the screen i have developped.
Is there some code to add to enable this functionality or it is include in SAPLLMOB on standard fields ????
It's a new strange world for me today...
Many thanks to everyone who can explain me
Alain

hi,
I am facing this problem as well. Is there any reference to create the new screen?
Hope someone can help! Thanks!
Regards,
Darren

How do I reorder songs in a playlist in the new itunes??? I can no longer just click and drag. When I click, it doesn't move!!!! Need help ASAP- trying to prepare for an aerobics class and need songs in a specific order!

How do I reorder songs in a playlist in the new itunes??? I can no longer just click and drag. When I click, it doesn't move!!!! Need help ASAP- trying to prepare for an aerobics class and need songs in a specific order!

Vera,
Use View > View Options, and set 'Sort By" to "Manual Order."
Then you will be able to drag-n-drop songs up and down the list.

I need help getting new authorization codes for digital copies

I need help getting new authorization codes for digital copies of movies. Can someone help me out?

There's a lot of results in Google when you search for this but unfortunately refreshing the page doesn't seem to generate a different code anymore. Mine also says already redeemed

I need help in Downloading Adobe Elements for my Mac & Adobe Acrobat for my laptop...I have been battling for the last day.

I need help in Downloading Adobe Elements for my Mac & Adobe Acrobat for my laptop...I have been battling for the last day.

~graffiti wrote:
PjonesCET wrote:
I know if you attempt to download and exe file to Mac from a Mac Partition you'll get something like. Cannot not understand file format octet-stream. This means it does not recognize MS execute files.
Not necesarily. I've done it a few times.
PjonesCET wrote:
I'm not sure you can download a PC copy of Acrobat 9 unless you operating from bootcamp or other such application and running the PC partition.
Yes. You can.
I've learned something. New. This must be recently changed. That last time I clicked on a Link I though was a dmg file and turned out it was and exe file my Macs wouldn't allow me to do so. But haven't tried recently everytime and exe file comes up I cancel. I gues I am used to the time everytime a Virus or some other nasty was downloaded it was packaged in and exe file and Macs owuldn't allow it. I suppose with the INtel guts now they can no longer refuse to download.

Maestro need help also code is 75957252 for bios password reset

maestro need help also code is 75957252 for bios password reset
This question was solved.
View Solution.

Check your other post. I replied there.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

I need help getting the license number for Adobe Photoshop Elements. However, It doesn't recognize me as an authorized user. Can someone help?

I need help getting the license number for Adobe Photoshop Elements. However, It doesn't recognize me as an authorized user. Can someone help?@

I am having the same problem...did you ever fix it?

I think I need help with driver (software) settings for D110a

I think I need help with driver (software) settings for D110a all-in-one
Product: D110a all-in-one
OS: Windows XP Professional
Error messages: None
Changes before problem appeared: None--new installation
The quality of photo images (mostly JPG files) in printouts is awful even though the files display beautifully on the PC screen. I am using
IrfanView software for displaying/printing. As far as I can tell, IrfanView is not the problem.
When I print the same images on a Deskjet 5150 attached to a different PC also running XP Pro and IrfanView, the quality of the printouts is at
least acceptable, Some would probably say good or very good.
It's dificult to explain in words the problem with the printouts. A picture of really pretty vegetables (squashes, tomatoes, watermelon, etc) comes
out much too red. Moreover, the red, which appears shaded on the screen, seems to be all one shade in the D110a printouts.
Something similar happens to a view of a huge tree in full leaf. On screen, there are subtle variations in the "greenness" of the leaves. In the
printout, all green is the same shade. In the same printout, the trunk of the tree is all a single shade of grey. It isn;t even obvious that the
trunk is a round, solid object.
I liken the effect to audio that disappears entirely when you lower the volume and gets clipped into square waves in even moderately loud passages.
I don't know whether the D110a driver software permits adjusting the parameters that appear to be set incorrectly, and if adjustments are possible,
how I would identify which parameters to adjust, how I would access them, or how I would adjust them. I'm hoping that someone can help. Thanks.
I forgot to mention that I have used the diagnostic application and it tells me that there are no problems.
e-mail me at [email protected]

brazzmonkey wrote:
Hi everyone,
I noticed the following message when network starts on my gateway
Warning: This functionality is deprecated.
Please refer to /etc/rc.conf on how to define a single wired
connection, or use a utility such as netcfg.
Then I realized the way network settings should be written in rc.conf has changed. But I can't figure out how this should be done.
Currently, my set up is the following (old way):
INTERFACES=(eth0 eth1)
eth0="dhcp"
eth1="eth1 192.168.0.10 netmask 255.255.255.0 broadcast 192.168.0.255"
ROUTES=(!gateway)
eth0 is on DHCP because the IP is dynamically assigned my ISP.
eth1 has a fix IP because it's on the LAN side.
No problem to use DHCP on eth0 with the new settings.
But for eth1, I don't know what I am supposed to write for gateway.
Wiki isn't clear on that one either, and it looks like many articles still refer to the old way.
Any guidance appreciated, thanks.
brazzmonkey,
you can't define 2 interfaces the old way (even though I saw some tricky workaround somewhere in the forums).
Use, f.e., netcfg:
Comment your old lines.
In /etc/rc.conf insert:
NETWORKS=(Eth0-dhcp Eth1-static)
DAEMONS=(..... !network @net-profiles ....)
In /etc/network.d create 2 files:
First one is named Eth0-dhcp.
Contents:
CONNECTION="ethernet"
DESCRIPTION="Whatever text"
INTERFACE=eth0
HOSTNAME="your hostname"
IP="dhcp"
DHCP_TIMEOUT=15
Second one is named Eth1-static.
Contents:
CONNECTION='ethernet'
DESCRIPTION='whatver'
INTERFACE='eth1'
HOSTNAME='hname'
IP='static'
ADDR='192.168.0.10'
GATEWAY='192.168.0.1' # your gateway IP
DNS=('192.168.0.1') # your DNS server
The names Eth0-dhcp and Eth1-static are not magic. They just must be the same in rc.conf and in /etc/network.d.
Hope it helps.
mektub
PS: netcfg must be installed.
Last edited by Mektub (2011-07-20 14:07:05)

Need help reformatting my hard drive for mac only

Help please
Need help reformatting my hard drive for mac only with my toshishba hard drive

What Mac is this please, with what version of OS X?

Need help to redeem contact code for OS X 7

Need help to redeem contact code for OS X 7

Hello NOREDEEM,
Thanks for using Apple Support Communities.
If you have the purchase code for OS X 10.7 Lion, then you can follow the directions below to redeem it on your Mac.
Mac App Store: Redeem gift cards and download codes
Take care,
Alex H.

I need help with downgradeing my ios for my ipod touch 4th gen

i need help with downgradeing my ios for my ipod touch 4th gen

As has alwys been the case, you cannot go back.
Sorry

Need help reinstalling Acrobat X pro for MAC. Got one site but I-tunes didn't recognize so couldn't go further. I have serial

Need help reinstalling Acrobat X pro for MAC. Got one site but I-tunes didn't recognize so couldn't go further. I have serial

Actually, you can and have downloaded from there, because that message only happens when the download is finished.
The message is entirely normal, and is Apple's way of encouraging the world to use the Mac App Store. That doesn't help you because Acrobat isn't in the Mac App Store - it isn't allowed there.
So, what to do? Change your system settings
Please follow the steps given below to resolve this issue -
System Preferences > Security & Privacy > General > Allow applications downloaded from > Anywhere

Need help selecting the right MBP for me, just bought a pc with Windows 8 and I already regret it..

Ok, so I'm an engineering student and I am in need of a good laptop to run programming and design type software. I have an older iMac which I love but I need the portability of a laptop for school. I was thinking I would be fine with a pc since most of the software I would be using for school is windows based. So last night, after shopping around for quite a bit, I decided to go with a Sony Vaio E series laptop with Windows 8, 8gb ram, i7 processor, dedicated graphics card, 1tb hard drive, and touch screen. It was the best performance laptop (on paper) Best Buy had in the store for just under $1000. I would have loved to get an upper end MBP but they are over twice the price as the Sony.. So I get it home with the Vaio and it feels laggy and glitchy, it takes 2 seconds for the window to pop up after 'right clicking', I can see lines in the screen, the resolution seems far from HD when on the normal looking windows side (as opposed to the tablet look, forgive my poor terminology) and the web browser, and the touch pad seems to be hit or miss in that it doesn't always register the touch pad commands. I checked all of the visual and performance settings, made the resolution as high as possible, changed some of the settings to the high performance settings, made sure all of my drivers were updated, and the only effect was a very loud fan that runs constantly.
So in short, I am going to take this back and start looking at the macbook pros. Here's my dilemna, I don't know which specs I will definitely need in a Macbook Pro. I need to be able to run windows on it either in parallel or as a partition for my programs necessary for school. Can the MBP run windows smoothly enough to run 3D design types of programs? If so, which one should I get? I love the size of the 13" MBP but it only has a dual core processor, instead of the quad core like the 15" MBP, I'm not sure if I definitely need the quad over the dual core. I would love a solid state MBP but they are out of my price range and not enough space if I end up partitioning it.
Sorry for the book, but school starts Monday and I need some direction to find out which one I need to get fairly quickly. Any help would be greatly appreciated.

Take a look at this MBP, a refurbished unit. Don't let the late 2011 release date put you off. For about $500 less than an equivalent 'new' one with similar specifications you get a quad core CPU and excellent graphics. As Steve359 mentioned, this can be upgraded if the need arises and has the same warranty as a 'new' one
I would not be surprised that these may actually be 'new' MBPs due to the length of time that they have been replaced by the current generation. I purchased a 17" model about 5 weeks ago, and a serial number check suggests that it is 9 weeks old.
http://store.apple.com/us/product/G0NM5LL/A
Ciao.

I need help registering my i pad for e print

Similar Messages

Maybe you are looking for