I need help setting a "rule" in my email so that emails from a specific person always gets sent to the trash.

I have some emails from businesses that I receive all the time. I want to make it so that they go straight to my trash. Any help would be appreciated!

Mail>Preferences>Rules, then write the one you need:The result will look like this:

Similar Messages

I need help setting up my Apple wireless network so that there are no conflicts with IP addresses for any of my devices.

I have 2 Airport Extreme Base Stations, 1 is a 5th generation 802.11n and 1 is a 2nd generation 802.11n. I have 2 Extreme Express Base Stations which are 2nd generation 802.11a/n. The idea is to create a network that works throughout my 2 story house and extend into the garage. It's not a large house 1400 sq ft wood construction. The internet feed comes into the Hughes Net modem upstairs. This is where I want the main base station (5th generation). I eventually will connect a network drive and printer to it. I then want to place the second base station in the room directly under the upstairs room where the main base station is and connect my desk top computer to it. In the living room I will have one of the Express Base Stations connected to the Micro Cell and house stereo system. In the garage (50' away from the living room Express Station & 75' from the Main Base Station) I will place the other Extreme Express Base Station to be connected to the garage stereo system. All of this is with the idea to extend the range of my network for all my devices and airplay to my stereo systems.
Ok, so I have a lot of wireless devices. 2 2nd geneartion iPads, 2 iPhone 4s's, 3 Wi-Fi enabled Sony TVs, Apple TV (near the house stereo Extreme Express), AT&T Micro Cell connected to house stereo Extreme Express, Lorex Security DVR system (connected to main base station upstairs), Whole-House DTV Network system,1 Macintosh Quicksilver Desktop computer, 1 MacBook Pro, and 1 Mac AirBook. As you can see I need a lot of DHCP IP addresses.
So, how do I go about setting this all up? I have read countless articles and discussions but I still have conflicts. It usually mostly, but not limited to, effects my wife's AirBook. Not good at all! I used to have a WDS setup but I understand that the 802.11n Airport Extreme's do not support this. And when I try to distribute a range of IP addresses I run into problems. So can someone please help me resolve this headache?

Configure the Extreme connected to the Hughes Net modem as your router. In other words in AirPort Utility, Network tab > Router Mode should be set to "DHCP and NAT". It will provide IP addresses to all the devices on your network.
All other AirPort devices on your network should be configured as bridges: Router Mode "Off".
You may want to configure static IP addresses for any equipment that is likely to be permanently installed. For them, there is no reason to have the Extreme issue an IP address, and they can keep the same one forever.
The Microcell may be able to connect to the Express's LAN port such devices that have to handle voice or other real time audio or video streaming are generally best installed using a strictly wired connection. The same applies to the Sony TV and AppleTV. Keep them on a wired LAN served by the Extreme, avoiding any reliance on a wireless link if at all possible.
The way to implement a complex network like yours is to add one device at a time. Ensure it connects reliably, then add another. You have a lot of work to do.
WDS can be implemented even with new Extremes but its performance is likely to be so unacceptable that it would be nothing more than an exercise in frustration for you.

Need help setting up for wireless printing- remote access- by email

When trying to set up my printer I get a box that says "Printers Code", is the "printer code" another word for hardware address or is it the access point hw address or what is it? I wish the HP people would stick to the same nomenclature in their set up!

Hi,
Printer code is a code for your printer which allows you to register to ePrint center. From there you can get printer email address and you can email to this email address for printer to print. Not all printers have printer code. You can read more information from the following link:
https://h30495.www3.hp.com/help/about
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HOW TO?: Need help setting up 3 different iCloud accounts for my kids (so each has own iMessanger)using same Apple ID (mine) ....they don't have their own separate email addresses to work from...how do I do this?

Need help setting up 3 different iCloud accounts for my kids (so each has own iMessanger)using same Apple ID (mine) ....they don't have their own separate email addresses to work from...how do I do this?

Any devices connected to the same icloud account can sync all the data on that account. For this reason an icloud account is really for a single user.
On a mac, if each user has their own account, then the itunes for that mac account should be set up to connect to that user's icloud account (System preferences>icloud).

Need help setting up TV equiptment

I have been very ill and I need help setting up my TV, DVR, Receiver, Surround sound systems. I'm afraid if I try to work on all the equiptment, I'll drop my HDTV or other componets because I'm still weak. Can anyone help me? I've called a few places and they want $100.00 to set it up. Give me a break! I know about inputs and outputs and other cables, I just don't have the strength to move the equiptment around. I am willing to pay. Please call me at 813-{edited for privacy}. Thanks, Teresa {edited for privacy}

blondeinneed wrote:
I have been very ill and I need help setting up my TV, DVR, Receiver, Surround sound systems. I'm afraid if I try to work on all the equiptment, I'll drop my HDTV or other componets because I'm still weak. Can anyone help me? I've called a few places and they want $100.00 to set it up. Give me a break! I know about inputs and outputs and other cables, I just don't have the strength to move the equiptment around. I am willing to pay. Please call me at 813-{edited for privacy}. Thanks, Teresa {edited for privacy}
Teresa,
I think the best way for someone to volunteer to help you would be for them to send you a Private Message (PM) here on the forums. You should see a small envelope in the upper right corner of the screen, when it changes color you will know you have a PM to view.
I would be happy to help, but since I am in North Texas I don't think that is a viable option Sorry....
Justin
FiOS TV, Internet, and phone user
QIP7232, QIP7100-P2, IMG 1.9A
Keller, TX 76248

Need help setting up and configuring rsync

Hello
I need help setting up, or rather configuring rsync to sync data between my brand new iMac and my Macbook Air.
Here is what I would like to:
- I want all of the files on both machines to be an exact mirror or copy of each other. Basically I have an iMac for at home, and then a Macbook Air for the road.
- The main folder on both Macs is called 'Sara' and I want the contents (mainly the 'movies' folder, 'music' folder, 'documents' folder and 'pictures' folder) to immediately sync up with each other when both of them are on my home network.
- this means if I'm working on a file at home on my Macbook, it will immediately write to the same directory on my iMac and vice versa (if I'm working on file(s) on my iMac, it will immediately save the contents to my Macbook). This way, if I'm working on last minute project my iMac, and then have to head out the door to the airport, the file is immediately saved to my Macbook (no usb for USB transfer).
- hopefully this makes sense??
Any help is greatly appreciated!
Thanks

It's a lofty but unrealistic goal. Rsync does not run automatically. There is no realistic method of instantaneously synching two computers over the internet or even on a LAN.
I would suggest you might try using Synk Pro which, in theory, can keep two devices in sync when they are both on the same network (and both have shared and mounted drives.)
If you must do this with rsync then I suggest a Google search for rsync tutorials.

I need help setting up an apple id for my sons phone. It seems his email address has been taken and/or we cant get the password.

I need help setting up an apple id for my son's phone. It seems his email address has been taken and/or we cant get the password.

Two different things
If you forgot the password
If you forgot your Apple ID password - Apple Support
If the email ID you want to use is in use by someone else - then you may need a new one
The iCloud ID's are usually unique and may be of help if you set one up

Need help Setting up Multiple Static Ip , 1 for each port of the fios router

Need help Setting up multiple Static Ip on my fios router
I have been trying to figure out how to set up multiple ip in my fios router.
However I kind of managed how to set up multiple static ip However the way I want it is for each port of my router to have an external ip signed to it. ( like 4 different modem in 1 )
Verizon gave me 5 static ip but they can not help me how to set it up.
Have anyone here done more then one static ip on different ports? I assume that the process will be the after the second static ip.

You want to set up Static Nat. You will not assign the IP to a port, but rather to a local machine. Figure out what machines you want your IP's to go to. Under the firewall section you will see static nat. Pick the machine you want and enter one of the IP's you were assigned.

Need help setting up FCE 4 PLEASE

OK, I'm NOT a professional, just need help setting up.
Just purchased FCE 4. Need to set up my Sony HDR SR11. I've already recorded most of my stuff in HD SP. Can someone Please help me set up?
thanks

Thanks for the info.
I updated and did a search in my manual for Log and transfer which didn't go to anything I can figure out. Sorry, I don't have time to read 1152 pages.
Can anyone just tell me how to get this going? There should be a simple set up correct?

My email is not working in lightroom. Need help setting that up.

Need help setting up my email in lightroom. For some reason it's not connecting.

Try posting in the Lightroom forum. People there are more tuned in to the detail working of the application:
http://forums.adobe.com/community/lightroom?view=discussions

I have a Steinberg MI4 and a Roland Fantom X7, and am trying to use my Fantom in Logic to record audio. Need help setting it all up using MIDI cables. Please help !

I have a Steinberg MI4 and a Roland Fantom X7, and am trying to use my Fantom in Logic to record audio. Need help setting it all up using MIDI cables. Please help !

Encryption wouldn't matter except for Wifi.
While 10.2 might help, there's not much you can do on the Internet these days with less than 10.4.11
Tiger Requirements...
To use Mac OS X 10.4 Tiger, your Macintosh needs:
    * A PowerPC G3, G4, or G5 processor
    * Built-in FireWire
    * At least 256 MB of RAM (I recommend 1GB minimum)
    * DVD drive (DVD-ROM), Combo (CD-RW/DVD-ROM) or SuperDrive (DVD-R) for installation
    * At least 3 GB of free disk space; 4 GB if you install the XCode 2 Developer Tools (I recommend 20GB minimum)
http://support.apple.com/kb/HT1514
http://www.ebay.com/sch/i.html?_nkw=mac+os+x+tiger+retail+10.4
See Tom's, (Texas Mac Man), great info on where/how to find/get Tiger...
https://discussions.apple.com/message/15305521#15305521
Or Ali Brown's great info on where/how to find/get Tiger...
http://discussions.apple.com/thread.jspa?messageID=10381710#10381710
As far as Memory, that's sort of easy, find your eMac here...
http://eshop.macsales.com/MyOWC/Models.cfm?Family=emac&sType=Memory
As far as Hard Drive, it's not easy to replace the Internal drive, I'd maybe suggest an external Firewire drive to boot from...
http://eshop.macsales.com/item/Other%20World%20Computing/MAU4S7500G16/

Need help setting up outlook mail on ipad2

downloaded the outlook app, need help setting it up.

Is it actually called Outlook, or is it called Outlook Mail Pro or Outlook Mail Complete or something like that? Those apps are actually by separate companies (ie, not Microsoft), and I don't personally have experience with them, but here are links to their support sites which should have the information you need (or an email address you can write to):
Outlook Mail Pro: http://support.codebeforedawn.com/customer/portal/topics/38871-outlook-mail-pro
Outlook Mail Complete: http://www.ikonicapps.com/outlook/
hope that helps...
Matt

Deperately need help setting up external midi devices

I need help setting up external midi devices.....Motu828...Midi express...RolandXV3080....Motif rack.......HELP

Theres not really much to setup. Assuming your synths are connected to the MIDI Express already..
In Logic, make a new MIDI track. On the left hand side in the track inspector, among the parameters you'll see an option for MIDI Port and Channel. Just pick which port the track is going to, set the channel and device id and play (And be glad you never had to deal with setting up the old Environment window in Logic 5 and below).
If you really wanna get into it and have all your MIDI ports named after the synth thats connected to it, open up Audio Midi Setup, create a device icon for each synth you have and draw the cables from each device to whatever port its connected to on the midi interface's icon.
Then in Logic everytime you pick your MIDI port on your track, instead of MIDI Port 1, MIDI Port 2, etc.,
it would be labelled XV-3080, Motif Rack, and so on.. I dont think theres anyway to do this within Logic itself (you can change the labels on your audio ins and outs, but not MIDI as far as I can recall)..
If youre talking about having access to patch names and whatnot like Digital Performer and Cubase let you do, Logic doesnt use the xml patch lists everyone else does. The above steps are pretty much all there is to be done as far as MIDI.
Heres my Audio Midi Setup window for reference.
Now when I select MIDI Port 1 in Logic its named MWXT, port 2 is SR-16, etc..

HT5538 I dont really get this i need help setting some things up on my Ipod.Can you help?

I need help setting up my Imessage and FaceTime.I have tryed and its not working.

iOS: Using FaceTime
iOS: About Messages
iOS: Troubleshooting FaceTime and iMessage activation
iOS: Troubleshooting Messages
iOS: Troubleshooting FaceTime

I have had 4 mac computers and after years of downloading songs from itunes, I keep recieving a message that I need to set up an account. when I try to make a new account, i get an error that says i already have an account. please help!

I have had 4 mac computers and after years of downloading songs from itunes, I keep recieving a message that I need to set up an account. when I try to make a new account, i get an error that says i already have an account.

Have you tried checking the Store drop-down menu in the iTunes interface to see if you are signed in the existing account?

I need help setting a "rule" in my email so that emails from a specific person always gets sent to the trash.

Similar Messages

Maybe you are looking for