I need help setting up file sharing with my MBP and a PC

i have been trying to set up file sharing so I can move files on my windows PC (music, pic's, office, pdf, etc..) to my new MBP.  I followed all the directions, but still cannot see the MBP on the PC.  I had it working a few days ago by setting up the workgroup function.  but now, nothing.  it will not show up in Windows Explorer. Just trying to move files into Dropbox.  Help!!  thanks.

i have been trying to set up file sharing so I can move files on my windows PC (music, pic's, office, pdf, etc..) to my new MBP.  I followed all the directions, but still cannot see the MBP on the PC.  I had it working a few days ago by setting up the workgroup function.  but now, nothing.  it will not show up in Windows Explorer. Just trying to move files into Dropbox.  Help!!  thanks.

Similar Messages

  • Too many id's need help setting up family sharing

    We currently have one apple id (tjc) that is associated with the apple store and one that is associated with itunes (m7).  The itunes one (m7) does not have an icloud account attached to it, used only for purchases from itunes store.  Husband uses the apple store id (tjc) and I have my own (jj).  Can I set up family sharing with the itunes id (m7) as the purchaser?  Or how do I keep all my itunes purchases if we make husbands/apple store id (tjc) the primary?
    Currently running OS X yosemite and ios 8 on an imac, iphones, and ipads.
    Thanks for your assistance!

    Hi bremaura,
    Thanks for the question. If I understand correctly, you want to havde all purchases from one Apple ID available in Family sharing. I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
    Family Sharing - Apple Support
    All your family’s purchases, on all your family’s devices.
    Once you’ve set up Family Sharing, all the eligible songs, albums, movies, TV shows, books, and apps ever purchased by family members are immediately available to everyone else in the family. And, of course, so are new purchases. 
    Thanks for using Apple Support Communities.
    Have a great day,
    Mario

  • Need help setting up a shared /Library/Fonts folder for font sharing

    Hi,
    I have a problem setting up a shared /Library/Fonts folder on my OSX 10.5.5 server that gets automounted on the OSX 10.5.x clients.
    While I managed to get the folder to show up automatically under /Network/Library/Fonts on the clients, the fonts in these folders do not show up in Font Book on the client systems. Plus, it seems like there is some sort of language mismatch, since I am using a German OSX installation. While the shared /Library/Fonts folder does show up under the "Network" area (where the servers are listed), it does not connect correctly on the "/Netzwerk" folder that OS X creates automatically. In fact there are 2 folders named "/Netzwerk" on my startup drive root directory, one that reads "/Network" when looking at it in the terminal, and one named "/Netzwerk". The /Network one does have a working link to the /Library folder, and the /Netzwerk one does only contain something looking like an alias of /Library, but it does not allow any access to this alias.
    If anybody did manage to get this Netowrk "/Library/Fonts" to work I would be happy for some feedback. I am simply not sure if this is related to a localization bug, or if I am doing something wrong here. The fact that the folder and the fonts does show up correctly under the network portion of the sidebar seems to indicate that my setup is correct, but still the fonts do not work.
    Any ideas, or maybe a step-by-step description on how to set this up would be great.
    Thanks a lot,
    Floh

    Hi, Sorry I don't have an answer for you. But how did you get to share /Library/Fonts? I was trying to do the same thing by using "File Sharing" in Server administrator. But under volumes, I don't see my root directory "/". So there is no way that I can share any of my folders under "/".
    Thanks.

  • File sharing with a G4Dual and a IMac

    Just upgraded to an iMac from a Power PC G4 Dual, file sharing is no problem as far as the ethernet is concerned, but the only snag is there is only one ethernet port on the iMac, which means having to disconnect from the web, does an ethernet hub work and allow me to file share my old G4 with my iMac and not interfere with my web connection. Help appreciated

    Hello, and welcome to Apple Discussions!
    More details on your setup would help (such as, what do you connect your iMac to in order to access the internet ... I suppose it's a router?)
    Assuming you connect your iMac to a router, all you would need is an ethernet switch such as a Netgear GS506 switch. Plug both Macs in to the switch, and connect the switch to your router. There are no settings to make in an ethernet switch such as this.
    On the other hand, if your router has more than one ethernet jack (RJ45) you could just plug both Macs into your router; no need for a switch.
    But we really need to know what device you connect your iMac to for internet access (BT Home Hub, Verizon Actiontec router, etc), and it would help to know the service, too (BT Broadband, Verizon FIOS, etc.)

  • Need help setting up a network with new Airport Extreme

    Hey All I need some help. Networks, Wan, WPA it's all greek to me. Here's what I am trying to do, I have a newer imac, an ipod touch, a apple TV and the kids have a laptop running on Vista. I have a DSL internet connection through Verizon with a Westell VersaLink Model 327W router. I disabled the wireless option on the versalink and hooked the Ethernet cable from the versalink to my Airport extreme. I am trying to figure out how to set things up so I can restrict the kids laptop from the internet after say 9pm but allow everything else unlimited access. I've read other posts and the manual but can't figure it out. When I turn the Airport off Bridge mode i get a bunch of errors re DHCP beginning and ending addresses and have no clue how to set this up. Before I spend hours on the phone with tech support I figured someone out there may be able to help. This can't be to difficult or is it?

    rmunoz274 wrote:
    I had to call Verizon and spend an hour on the phone, my Versalink is about 3 years old and I never updated it. There is a software update which makes it a little more mac friendly. Cables still run through it on the Ethernet port. I was able to turn the wireless feature off on the Versalink (to stop my neighbors and kids from bypassing the APE and just factory reset the APE and set it up with a shared IP adrs instead of bridging it. Also made sure I turned off the guest network on the APE. Once it was set up I clicked on Airport in the Airport Utility then wireless Clinets, jotted down the client I wanted to restrict access to (Kid's Laptop) then go back to Airport screen, last option on right Access then MAC Adrs Access Control change to "Timed Access", then click the + on the bottom of the window, type the MAC adrs you want to restrict and set time limits, when complete click done..... Only took me a week and a half to figure it out...... Good luck, if that doesn't help let me know, but I'm no expert...
    thanks!!
    i think i have the most recent 327w update, because it now shows my modem screen in a red color and it is broken into 3 sections across the screen.
    as far as the AEBS is concerned, you did not use it in bridge mode at all?
    i thought you had to connect 1 cable from it to the 327w? I have about 5 items i will be connecting, so i will probably run any wired from the AESB, but not sure yet?
    thanks, and yaeh last time my network took me a bit of time as well!!
    what kind of encryption are you running?
    thanks

  • Need help setting up WiFi - Xfinity with Network Switch, Time Capsule, Airport Express and Apple TV

    Hello - I recently got Comcast Xfinity service.  We had switched from a different service.  Our wifi service was never great, but prior to Xfinity, it worked decently.  But now that we have Xfinity, our wifi is much worse and very unreliable.  I am seeking advice on how to setup my various Apple wifi devices in my home.   I have attached a diagram that illustrates what I am dealing with.  We have a large old house with stone walls.  Comcast does not support this issue. 
    To explain the attached diagram, we have a total of 4 levels in our house - an unfinished basement, 1st floor, 2nd floor, and 3rd floor.  The Xfinity router is in the basement and it is connected to a NetGear 10/100 network switch.  I already have ethernet cables running from the network switch in the basement to various locations throughout the house.  So I have ethernet connected to my time capsule and ethernet connected to each of my 3 Airport express devices.  The dark lines running from the network switch to the various devices represents ethernet cable.
    The immediate problem that we are having is that we are unable to connect to our wifi networks.  The networks show on my mac laptop and my iPhone, for example, but I am unable to connect.  I know that I am inputting the correct password, but most of the time, we cannot get in.  Sometimes we can..... Very frustrating!  Also, due to the fact that I setup what I have over several years, I have multiple network names.  I once tried to fix that issue, but was unable to tackle it due to my lack of understanding.
    Here is what I am looking to accomplish:
    1. Seamless wifi access throughout our house.
    2. One name for our wifi network.  Right now we have multiple names for multiple networks.  Just want to simplify and have only one network.  (I guess that an additional "guest network" would be ok, but not absolutely necessary.
    Also, if you think I should disable the Xfinity wifi, and just rely on my mac wifi devices, I am perfectly fine with this.  Just tell me how to do so.
    I have no idea how where to start or how to set this up.  I imagine that I would need to disconnect everything and reset and start from scratch?  Can someone tell me what I should do?  Even general advice would be helpful, but the more specific, the better, given my limited understanding.  Any help or advice would be greatly appreciated.
    Thanks in advance!

    Your photo link is not working. Click on the camera icon to load an image. (Shorten the name of the file to something like WifiNetwork.jpg)
    Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    iOS 6 Wifi Problems/Fixes
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Need help setting up file for program Ai CS5 Mac

    Hello everyone, I am hoping you can help me with something. I am having a 20 page conference program printed through a 3rd party company.The printer sent me back the proof today and on almost every page my artwork is being chopped off.
    This is the email sent with the proof today:
    "               I want you to look at these spreads and tell me if this is how you       visualized your finished pages? A lot of your art is being cut off. The finished size is 11x17.       You sent pages that were 9x12, so I used them at 100% on the 12x18       press sheet. You only need to provide a 1/8" bleed, not a 1/2". You also have       bleeds on the centers of the spreads. Those should not have a bleed. Only the outside 3 edges should       bleed.
    I had trouble getting all of the art to line up."
    Printer Info:
    They print on 12/18 trimmed down to 11 x 17 (for full bleed)
    Requested bleed: 1/8
    They print out of Quark
    I was told I can send them individual PDFs and they will paginate them (in order and add page numbers)
    I created a file in Ai CS5 with 20 artboards (one for each page of the program) Now, the trim marks should be placed at 1 inch because they are trimming 1 inch from the top and 1 inch from the bottom. The bleed should be 1/8 so 0.125 on the 3 "outside" edges. Is this correct?
    I primarily do lay-outs, the person responsible for this project bailed last minute so I am a bit stuck. If I am designing it as individual pages what are the exactly dimensions, bleed, and trim marks needed for each page to be set up correctly for the printer to paginate. Should I also add a .5 margin along the edges as a safe zone or is that not necessary because of the bleed?
    Let me know if I didn't provide enough information. I appreciate any help I can get. Thanks in advance!
    -d

    It is often just simpler to build your pages (or spreads) to the actual size of the press sheet.
    I'll assume this is a saddle-stitched booklet.
    The press sheets will be 12 x 18 inches.
    It will be printed, then, as 11 x 17 printer spreads.
    That means it will have a half inch (not a whole inch) between the trims and the press sheet edges on all four sides.
    There will be three-eights inch between the bleed and the edges.
    (This is crowding things a tad; typically one tries to allow at least a half-inch gripper margin.)
    Anyway....
    1. Setup the document with twenty 9x12 vertical Artboards, with zero spacing, in two columns. Zero Bleed.
    (Often, depending on the nature of the content, I would choose to build such a thing as ten 12 x 18 Artboards, with content already arranged as printing spreads, thus eliminating the need for stripping. But in the following, you'll go ahead and make 20 separate Artboards, abutted in pairs, and treat these as two-page reader spreads, to make layout easy, and to accommodate artwork that may jump the gutter.)
    2. Turn on Show Grid. Turn on Snap To Grid.
    Rectangle Tool: Click the page. In the dialog, specify a 17 x 11 rectangle. This corresponds to your trim.
    Rectangle Tool: Click the page. In the dialog, specify a 17.25 x 11.25 rectangle. This corresponds to your bleed.
    Center align the two rectangles to each other, both horizontally and vertically.
    3. Zoom in. White Pointer: Snap the upper left corner of the rectangles to the grid at .375 H and .375 V of the top left Artboard.
    4. Convert the two rectangles to Guides. (View>Guides>Make)
    5. Line Tool: Snapping to the grid, draw your own trim marks at each corner, outboard of the trim. Use .25 pt. stroke weight. Registration color.
    6. Unlock Guides. (turn off View>Guides>Lock)
    7. Black Pointer: Marquee select around all the trim marks and the two rectangluar Guides.
    DoubleClick the Black Pointer. In the resulting Move dialog, enter a vertical movement of 12" and click copy.
    Transform Again (Ctrl D) 8 times.
    Now you have a set of trim guides, bleed guides, and trim marks on all 10 two-page reader spreads.
    8. Create the content as if the pairs of Artboards are facing pages of reader spreads. The top pair are the front and back. The other pairs are sequentially-numbered reading speads. Set up this way, your artwork can jump the gutter when desired.  You can put other printer's marks (sep names, etc.) in the bleed area if needed.
    9. Save A Copy to PDF with Use Artboards checked. The resulting PDF will contain 9x12 vertical pages. Viewed as spreads in Acrobat, you can see that the pages align.
    10. But when they are printed, they will be stripped into two-page printing spreads, ordered like so:
    JET

  • Just bought new time capsule- need help setting up WiFi network with another router

    Here ismy situation.
    I had a wireless network setup up at home using a Belkin wifi router.
    I have 2 macBooks (1 pro, 1 air) and 2 iphones that connect wirelessly and a desktop PC that is hard wired to the ethernet port.  In addition, I have a Verizon wireless network extender plugged in by ethernet.  All of the hard-wired gear is in our 3rd floor attic office (and the wireless signal was strong throughout the house).
    The Belkin wifi router was plugged into a wall ethernet jack that is in turn wired into a Linksys router in the basement (along with multiple other ethernet ports througout the house) and is hardwired to the Cable modem next to it.  All of the hard-wired ethernet stuff (including the router in the basement) was there when we bought the house, and I have no clue in the tangle of wires how to sort them out (but don't really think I need to)
    I just purchased a TimeCapsule to do wireless backups of my 2 macbooks, and tried to set it up alongside the existing wireless modem.
    Needless to say, this did not work well. I called  AppleCare, and was told that the TimeCapsule needs to be the "1st" wireless adapter, so I went into the basement, and connected the time capsule directly to the cable modem, and then out to the basement router.  The Belkin router still needs to be in the attic to supply the PC and the Verizon adapter (so it is near a window for GPS signal). 
    If I try to name the WiFi network the same SSID on both the TC and the belkin router (to have dual signal strenth coverage) the whole thing gets messed up and the TC cannot be "found" by the aiprort Utility software.
    What I have done now is that I have 2 side-by-side wireless networks with 2 unique names (actually 3, because I enabled the 5Ghz signal on the TC), but our wireless devices do not "switch" automatically from one SSID  to another stronger signal SSID as we move through the house
    Here's the question: How do I name them the same so that the devices will switch effortlessly to the stongest signal?  I understand it involves switching the "channels" but don't know how to do it right now.  Currently, everything works, so I don't want to mess it up tinkering.  Another caveat- there are several other wireless networks from neighbors houses that I can "see".  I jsut downloaded a program called iStumbler that shows the channels, but not sure what to do with that info.
    Any advice would be appreciated.

    Here's the question: How do I name them the same so that the devices will switch effortlessly to the stongest signal?  I understand it involves switching the "channels" but don't know how to do it right now.  Currently, everything works, so I don't want to mess it up tinkering.  Another caveat- there are several other wireless networks from neighbors houses that I can "see".  I jsut downloaded a program called iStumbler that shows the channels, but not sure what to do with that info.
    Any advice would be appreciated.
    OK.. sounds like a mess.. or at least messy and the previous people should have left a log book with all the IP address info in it.. you have far too many routers.. but from here it is impossible to tell how they are configured. Most are probably just setup as AP.
    Naming rule for wireless.. Same SSID same security different channel.
    SSID ie wireless name to work on the PC side should have no spaces and no special characters. TC name should also follow that rule. So the devices need to all set with fixed channels.
    Don't worry too much about iStumbler and what is outside your house.. there isn't enough channels at 2.4ghz anyway. And you are going to need to use them all. There are only three non-overlapping channels. 1, 6, 11 so set each device to one of those channels. The TC should be as close as you can to where you normally use the MacBooks.. and turn on the 5ghz. You will have to leave it to automatic name so the Macbook can also roam across from 2.4 to 5ghz. But if you care to use a different name and force it onto 5ghz the speed is much better as long as you are in the same room.
    Roaming is great in theory.. often in practice it just doesn't work.. you need to step in and turn off wireless and then turn it back on.. you can quickly see which router it is connecting to by hold down the option key when you click the airport fan in the top menu area.. and look at bssid.. you will have to figure out which number MAC address relates to which router.
    Also do not be surprised if Lion gives you issues. It seems to often drop out and lose connection to the TC as a backup device even if internet is still working.

  • Need help setting up web server with WRT54GS

    Hello,
    I am trying to set up a web server with my linksys router. For the network settings, I have used 192.168.001.150 as my primary IP (192.168.1.150, all 3 numerical characters have to be filled in), 255.255.255.000 as my primary netmask and 192.168.001.001 (192.168.1.1) as my gateway. I have gone into my router and then enabled port fowarding for port 80 to 192.168.1.150 but I still cannot access my web server. What could be the problem?
    Any help would be greatly appreciated. I'm trying to set up this server so I can test scripts and things.

    bump

  • Need Help Setting Up Raid Card with Windows xp pro 64 bit

    I need a 64 bit driver for my k8t neo-fis2r motherboard. I tried to use the disk that came with the board, but I keep getting an error. please help.

    go to the via website and download the via 5.00a package, it contains a driver for the onboard via controller!
    dont try the promise one, it wont work! tried it several times! we have to wait for an updated driver to be able to use it!

  • Need help setting up eyeHome - Wireless with AX

    Hi all,
    I am trying to setup eyeHome over a wireless connection using Aiport Xtreme.
    I have no problem connecting to the internet through AX and my D-Link ethernet modem (thanks to Apple Support), works perfectly.
    But when I try and add eyeHome to this equation everything seems to stop working and I have to reset my AX and start all over again.
    The problem seems to occur when I setup try to set up WDS over, I get an error about not being able to configure the base. Elgato's (eyeHome's makers) instructions on how to setup the device arent clear.
    Please help me out on this. Cheers.

    A little confused actually. Why does D-Link DSL- 300T have to support WDS, when it is the wireless adapter provided by Elgato which is having problems being configured. The setup is as follows?
    WITHOUT ELGATO WIRELESS ADAPTOR ATTACHED:
    ADSL LINE --via rj cable----> DLINK MODEM
    DLINK MODEM ---via ethernet cable----> AIRPORT EXPRESS
    AIRPORT EXPRESS - ----> iMac G5
    WITH ELGATO WIRELESS ADAPTOR ATTACHED:
    ADSL LINE --via rj cable----> DLINK MODEM
    DLINK MODEM ---via ethernet cable----> AIRPORT EXPRESS
    AIRPORT EXPRESS - ----> iMac G5
    EYEHOME BOX ----via scart----->TV
    WIRELESS ADAPTOR----via elgato's ethernet cable---> EYEHOME BOX
    EYEHOME BOX---communicates via WIRELESS ADAPTOR through AX--->iMac
    Hope this makes sense

  • I need help setting up ipad 2 with airport express??

    I am having trouble getting my ipad to play music wirelessly, but my macbook is fine. Is there something I need to do on my ipad to get it to work?

    Please check out the following Apple Support articles on how to stream iTunes from your IPad:
    Using AirPlay
    Wi-Fi base stations: How to set up and configure AirPort Express for AirPlay and iTunes

  • Re: I need help setting up OfficeJet 7400 with WPA2

    If I select WPA my Netgear N300 drops down from 300kps to 54kps. That is unaccecptable. Is there an update to the OfficeJet 7400 All-in-one that will provide WPA and not just WEP security protocol?
    Also, I downloaded the Update for Windows 7 64bit and when I ran it says it is not for Windows 7. What's up with that? Nice job HP!

    If I select WPA my Netgear N300 drops down from 300kps to 54kps. That is unaccecptable. Is there an update to the OfficeJet 7400 All-in-one that will provide WPA and not just WEP security protocol?
    Also, I downloaded the Update for Windows 7 64bit and when I ran it says it is not for Windows 7. What's up with that? Nice job HP!

  • Need help setting up Raid HD with 10.5?

    I have a 2tb external HD, my G5 sees it as a 1x2TB (not 2x1TB), I am running out of space and I was thinking about getting another 2TB HD.
    Is there a way, using Leopard, to mount the two drive as one 4TB?
    Thanks
    Fred

    Hi Fred,
    1. Test and verify your 2TB clone. If at all, clone the clone to somewhere else.
    2. Connect the new 2TB drive, erase it and the other 2TB drive (thus both drives you want to use to create your "main" 4TB drive) in Disk Utility.
    3. Create a striped array. From the DU helpfile:
    Select one of the disks that you want in the set, and click RAID.
    Click Add , and type a name for the RAID set.
    Choose a format from the Volume Format pop-up menu.
    Choose Striped RAID Set from the RAID Type pop-up menu.
    Drag the disks you want to use in the set to the list on the right.
    Click the Options button to specify an optimal block size for the data stored on the set.
    Set the block size to match the size of data stored on the set. For example, a database might store small units of data, so a small block size might be best. A video processing application might require fast throughput of large amounts of data, so a larger block size might be best.
    Click Create.
    4. Clone over from the 2TB clone to the new 4TB array.
    5. Repeate steps 2 and 3 to create the 4TB "clone" drive.
    6. Clone back from the "main" 4TB drive to the new 4TB clone array.
    You will find lots of info in the DU helpfile on RAID options. There's also a good article on Wikipedia (search for RAID). Plus loads of posts here (do a "site:discussions.apple.com" search on Google).
    /p

  • Needs help setting up mac as a web/ical and mail server

    i have my domain as i.e. mydomain.com How should I set up the DNS and all? I have seen everywhere as mydomain.com.private or something like that... i need to make sure my website and my emails [email protected] it is all ok.. I am pretty new with OSX Server
    I was able to get my website running but i am not able to access ical from my iphone .. i can send emails but not receive them... anyone willing to chat and help me out?

    Funny you should ask, because I have been spending the day trying todo the same. I just need to know what to enter into my mx record in network solutions. I can send mail, but I can't receive it just yet. Any help would be great.

Maybe you are looking for