I need help to change user name, it does not belong to this account it belongs to my employee.

My employee was helping me setup my Apple ID and accidently typed his username "mykizism" into the user name field when creating my apple id account.. It is now permanently attached to my Apple ID and this is not acceptable.
My employee has also stated that his user name is private to him and wishes for it to be not publicly displayed.
Can a moderator / host please help me with this?

I sent your request in to the hosts.

Similar Messages

I need help with changing my e-mail. I just made this account today and I want to delete it or change the e-mail. Help would be very nice!

Hello can you tell me how to terminate my account(DELETE IT!) or change the e-mail. I went to privacy setting and my e-mail was shown, but nothing about changing it. I went to profile settings and there was nothing about deleting it so any help would be highly appreciated!

Deleting the iTunes account is not the solution as you will very likely lose any and all purchases ever made with the account.
If you cannot find the option on the site, contact iTunes support.

Error: MDL1819: User Name OWB_OWNER does not exist in repository.

Hi All,
While doing OWB metadata export I got the following error.
Error: MDL1819: User Name < BCP_OWB_OWNER> does not exist in repository.
Actually daily I will take back up for metadata in OWB_OWNER project.
But last 3 days onwards I am getting this error.
Plese help me?
I have nearly 50 mapping in this repository.
Thanks in Advance.

Hi!
I know I'm late with this post, but I'll post it anyway for future reference!
I encountered the same problem and found out that I had a trailing space in my login name, so check for any traling spaces at login to OWB-designer!
(From the error message pasted in your question it seems you have a space in the beginning)
That solved the problem for me.
BR Par

Need help in formatting the Date - Date does not

Need help in formatting the Date - Date does not formats and give Not a valid month error in the below scenario.
select oc.ST_PGM_MGR, r.ag_dnum, get_major_work_type(r.perf_eval_rtng_id) "v_work_code", r.ag_dnum_supp "supp", r.intfinal, to_char(r.formdate,'MM/DD/YYYY') "formdate", to_char(r.servfrom,'MM/DD/YYYY') "srv_from", to_char(r.servto,'MM/DD/YYYY') "srv_to", descript, add_months(to_char
--- Bellow line of Code on trying to format it to mm/dd/yyyy gives the error
(r.formdate, 'DD-MON-YYYY'),12) "formdate2"
from table REdited by: Lucy Discover on Jul 7, 2011 11:34 AM
Edited by: Lucy Discover on Jul 7, 2011 1:05 PM

Your syntax is wrong - look at the post above where this syntax is given:
to_char (add_months(r.formdate,12), 'MM/DD/YYYY') "formdate2"Look at the formula from a logical perspective - "inside out" to read what is happening -
take formdate, add 12 months
add_months(r.formdate, 12)then apply the to_char format mask - basic syntax
to_char(date, 'MM/DD/YYYY')Compare to your syntax:
to_char(add_months(r.formdate, 'MM/DD/YYYY'),12) "formdate2"You will see your format string inside the call to add_months, and your 12 inside the call to to_char.
Good luck!

HT5192 I need help? The iOS 5.1 does not want to download onto my ipad 2! Please help.

I need help? The iOS 5.1 does not want to download onto my ipad 2! Please help.

Make sure you are using either OpenDNS or Google Public DNS. It may in fact resolve it, but there could be other factors or causes.

Rsh - connecting using user name that does not exist on remote computer

hi
is it possible to connect to a remote computer as, for example John, if user account John does not exist on the remote computer but is listed in .rhosts?
this is what i have written in .rhosts on the remote computer ( Work ):
home root
home John
when I connect as root:
rlogin -l root Work
everythings fine, but when I try to connect as John I get the incorrect login message
I know the message above probably answers my question, but I want to be sure

If the user id exists, you can bypass the authentication with .rhosts or /etc/hosts.equiv files; but you can't login to a remote machine as an anonymous user.

Need Help! Wierd loading percentage issue does not work in IE but in other browsers it is ok, why?

Hi!
I have created a little test swf for my client and I have
encountered a wierd problem because the loading percentage text
field does not seem to function in IE 6 but the same file works
fine when viewed in Firefox and Netscape. When I test the movie
using simulate download in Flash it works well too. Is this a bug
and how can be fixed?
Please take a look online:
http://www.attila.reinhardt.com/clients/accentcom/clientprofiles_cheyney.html
I have also posted the related actionscript code below.
Thank you for any help in advance,
Attila

<< I Tried to post it through this link -
http://input.mozilla.com/en-US/feedback#sad
There was no visual clue that it took the feedback - just sat on the screen with my information in the text box. >>
The same thing happens with me.

Need Help Choosing A Basic Phone That Does Not Require A Data Plan

Hello, I need to replace my current basic phone and do not qualify for an upgrade yet.
I need to find a new or used phone that does not require data. Can someone please give me some models that will work that are newer?
The VZW prepaid models have to be used 6 months on prepaid before you can use them on a contract and I have a contract.

Usually on eBay, the listing will indicate if it's prepaid.
I agree with Droid Usrr that the Intensity 2 is worth checking into, because it has a great rubberized keyboard and you can get one new for less than $100.
Depending on what you're willing to spend, I also noticed that the Wal-Mart in my area is selling the brand new Intensity III off contract for $175. That way, you'd still have the year warranty on it, and it's a solid phone.
There usually are quite a few inexpensive feature phones on Craigslist, too, if you're not opposed to meeting with strangers. It's best to meet at a Verizon store and activate it before handing over your money.

Need help to change user email id in table ADR6

Hi,
i want to update user email id in table adr6. i hv written following code but not working to change email in table adr6.
      DATA lo_nd_email TYPE REF TO if_wd_context_node.
      DATA lo_el_email TYPE REF TO if_wd_context_element.
      DATA ls_email TYPE wd_this->element_email.
      DATA lv_mail_id LIKE ls_email-mail_id.
    navigate from <CONTEXT> to <EMAIL> via lead selection
      lo_nd_email = wd_context->get_child_node( name = wd_this->wdctx_email ).
    get element via lead selection
      lo_el_email = lo_nd_email->get_element( ).
    get single attribute
      lo_el_email->get_attribute(
        EXPORTING
          name = `MAIL_ID`
        IMPORTING
          value = lv_mail_id ).
      DATA:lv_bname TYPE BAPIBNAME-BAPIBNAME.
      DATA:lt_return TYPE TABLE OF bapiret2.
      DATA:PER_NO TYPE AD_PERSNUM,
           ADDR_NO TYPE ADRC-ADDRNUMBER."AD_ADDRNUM.
      DATA:SEARCH TYPE REF TO IF_WD_CONTEXT_NODE.
      SEARCH = WD_CONTEXT->GET_CHILD_NODE( 'USER' ).
      SEARCH->GET_ATTRIBUTE( EXPORTING NAME = 'BNAME'
           IMPORTING VALUE = lv_bname ).
      DATA:wa_address TYPE bapiaddr3.
      DATA : CONS_NO TYPE AD_CONSNUM.
    IF lv_mail_id IS INITIAL.
          get message manager
          DATA lo_api_controller TYPE REF TO if_wd_controller.
          DATA lo_message_manager TYPE REF TO if_wd_message_manager.
          lo_api_controller ?= wd_this->wd_get_api( ).
          CALL METHOD lo_api_controller->get_message_manager
            RECEIVING
              message_manager = lo_message_manager.
          report message
          CALL METHOD lo_message_manager->report_error_message
            EXPORTING
              message_text = 'Please Enter Email Id'.
    ENDIF.
   DATA:l_addr type addr_keynr.
   DATA:C_YES(1).
        CLEAR:C_YES.
        C_YES = 'X'.
   TYPES: ty_comm_smtp TYPE adsmtp ,
        ty_returncode TYPE SZAD_FIELD-RETURNCODE,
        ty_error TYPE ADDR_ERROR,
        adsuse TYPE ADSUSE.
    DATA:EMAIL_ID TYPE AD_SMTPADR,
         lt_comm_smtp TYPE STANDARD TABLE OF ty_comm_smtp,    """"Data Object
         lv_returncode TYPE STANDARD TABLE OF ty_returncode,
         error_table TYPE STANDARD TABLE OF ty_error,
         lt_adsuse TYPE STANDARD TABLE OF adsuse.
    data:ls_comm_smtp like LINE OF lt_comm_smtp,
         ls_returncode like LINE OF lv_returncode .
    CALL FUNCTION 'SUSR_USER_ADDRESSKEY_GET'
      EXPORTING BNAME    = lv_bname
      IMPORTING PERSNUMBER    = l_addr-persnumber
                 ADDRNUMBER    = l_addr-addrnumber
           EXCEPTIONS ADDRESS_NOT_FOUND = 1
                      OTHERS            = 2.
IF SY-SUBRC = 0.
    REFRESH: lt_comm_smtp.
      CALL FUNCTION 'ADDR_PERS_COMP_COMM_GET'
           EXPORTING
                address_handle    = ''
                address_number    = l_addr-addrnumber
                person_handle     = ''
                person_number     = l_addr-persnumber
                DATE_FROM         = '00010101'
              LANGUAGE          = SY-LANGU
                table_type        = 'ADSMTP'
                iv_current_state = space                       "*981i
           IMPORTING
                returncode        = ls_returncode
           TABLES
                comm_table        = lt_comm_smtp
                error_table       = error_table
                et_usage          = lt_adsuse                   "*981i
           EXCEPTIONS
                parameter_error   = 1
                address_not_exist = 2
                person_not_exist = 3
                internal_error    = 4
                OTHERS            = 99.
      IF sy-subrc <> 0.
        IF sy-subrc = 1 OR sy-subrc = 2 OR sy-subrc = 3.
         raise_message 'AM' 'A' 885 'ADDR_PERS_COMP_COMM_GET' space
         space space internal_error.
        ELSE.
         same_message_dia_a internal_error.
        ENDIF.
      ENDIF.
ENDIF.
    CLEAR:ls_comm_smtp, email_id.
    READ TABLE lt_comm_smtp INTO ls_comm_smtp INDEX 1.
    EMAIL_ID = ls_comm_smtp-smtp_addr.    """""""OLD EMAIL ID which we get from ADDR_PERS_COMP_COMM_GET
    CONS_NO = ls_comm_smtp-CONSNUMBER.
    CLEAR:ls_comm_smtp.
    ls_comm_smtp-CONSNUMBER = CONS_NO.
    ls_comm_smtp-FLGDEFAULT = 'X'.
    ls_comm_smtp-HOME_FLAG = 'X'.
    ls_comm_smtp-UPDATEFLAG = 'U'.
    ls_comm_smtp-smtp_addr = lv_mail_id.
    TRANSLATE email_id TO UPPER CASE.
    ls_comm_smtp-smtp_srch = email_id.
    REFRESH :lt_comm_smtp.
     append ls_comm_smtp to lt_comm_smtp.
IF SY-SUBRC = 0.
    CALL FUNCTION 'ADDR_PERS_COMP_COMM_MAINTAIN'
         EXPORTING
              address_handle    = ' '
              address_number    = l_addr-addrnumber
              person_handle     = ' '
              person_number     = l_addr-persnumber
              table_type        = 'ADSMTP'
              iv_time_dependence = C_YES                   "*981i
        IMPORTING
             returncode        = ls_returncode
        TABLES
             comm_table        = lt_comm_smtp
             error_table       = error_table
        EXCEPTIONS
             parameter_error   = 1
             address_not_exist = 2
             person_not_exist = 3
             internal_error    = 4
             OTHERS            = 99.
      IF sy-subrc <> 0.
        EXIT.
      ENDIF.
ENDIF.
IF sy-subrc = 0.
      COMMIT WORK.
ENDIF.
i hv also tried second approch available on sdn CALL FUNCTION 'ADDR_COMM_MAINTAIN'. but in this fm person number we can't pass.
please help me

Hi Abhilesh,
You can use the following FM's to update the Email ID. There are many posts ADDR* FM using for updating Email ID. Please have a look if you have a doubt.
DATA: iadsmtp TYPE adsmtp    OCCURS 0 WITH HEADER LINE.
"Retrieving Address Details
CALL FUNCTION 'ADDR_COMM_GET'
      EXPORTING
        address_number = addrnr
        table_type     = 'ADSMTP'
      TABLES
        comm_table     = iadsmtp
      EXCEPTIONS
        OTHERS         = 0.
READ TABLE iadsmtp index 1.
if sy-subrc is initial.
iadsmtp-SMTP_ADDR = 'new mail ID'. " Here pass your New Email ID
Modify iadsmtp.
Endif.
CALL FUNCTION 'ADDR_COMM_MAINTAIN'
      EXPORTING
        address_number           = addrnr
        table_type               = 'ADSMTP'
        substitute_all_comm_data = 'X'
      TABLES
        comm_table               = iadsmtp
      EXCEPTIONS
        OTHERS                   = 0.
Then call FM 'ADDR_SINGLE_SAVE' to do the Commit.

Need help with changing the name.

I got my palm pre from an uncle who lives in the states. The problem is I can't call tech support to ask them because I live in belize. The proble I have with my pre is that I have added my email account to the phone, but when I send an email, they receive it in my uncles name, my name is lanny and they receive an email form cesar, I think you can see where the problem lies. Is there anyway I can change it to my name? Please help!
Post relates to: Pre p100eww (Sprint)

Hello and thank you for using the Palm Help Forums!
I would create a new Palm Profile. To do this you will need to go to the Device Info app, Reset Options, then select Full Erase. All pictures, videos, and anything else stored in the USB side of the device will be erased. I recommend that if you want to keep any of that to connect your device to a computer then click and drag everything you want to keep off of the device and onto your computer.
After you perform the Full Erase the device is going to reboot. It is going to come up with a screen to sign in to a Palm Profile or Create a New Palm Profile. NOTE*** You will need a data connection to do this. Select Create a New Palm Profile and fill in the blanks. Once you are back into the device you can set up your email accounts again and it should display the name you created the Palm Profile with.
I hope this helps,
-Pat

Need help to change id name and password for second hand ipad payyed good money for it bought it at swapmeet cant find the old owner very fusterating please help

please help me set my password and id name for my ipad its not fair i bought it from a person for a high price and apple wont help you out. but you can reset anyother computer by your self with no problem

I am afraid you cannot activate the iPad without the Apple ID and Password of previous owner.

Need help with tool bar options..does not show hidden options in PS5 or PS CC trial..

in both PS% and PS 6 CC the tool bar will not reveal the hidden option when I click on the little arrow...this problem just began as I have used this successfully in the past...probably a simple solutin

Thank you. After much experimentation I discovered it was a problem with my mouse
Linda Badgley

Need help with PPro & Speedgrade link - render does not match results

Hello! My problem in a nutshell is that the color correction applied using the speedgrade link once exported does not match the preview montor results in PPro by a fairly large margin.
Process:
Source is AVCHD 60p 28mbps
New sequence to PPRo
Direct link to Speedgrade
Color correct
Send back to PPro
Timeline monitor in PPRo shows correct color correction results from speedgrade
Select and export the timeline (no extra effects added)
Tried MFX 100 Intra, and basic h.264 150mbps MP4
Both rendered out file with incorrect gamma, mushed colors, and missing blacks correction.
Imported both files back into PPro and compared the source montor to the original timeline monitor and they do not match up.
Then I tried exporting directly to a TIFF sequence, and the TIFFs render out with the correct speedgrade look...
So something in the middle of the process in the media encoder is messing up!
Bug probably? Anyone else experiencing this? Are you checking your output results?
-David

Here you go, for the h.264, which is what I normally use.
The visible differences were for example a purple pillow in the shot has its blacks and definition, once exported the purple turns to mush, no blacks and loss of definition, like a bad gain setting.

Need help with "The disk you inserted is not readable by this computer."

I have an external disk that I have not used in a while (an older G tech with FW800 ports). Recently I plugged it in and my 2008 iMac (10.8.5) reported, "The disk you inserted is not readable by this computer."
If I leave the external disk in, my iMac won't get past the white screen with the Apple logo on boot up.
With Disk Arbitrator, Disk Utility sees it but reports that it has zero bytes and the Verify and repair disk options are greyed out. DiskWarrior does not see it and if I start Disk Arbitrator up first and then Disk Warrior, everything but the cursor freezes and I have to hold the power button down to restart the computer.
I tried listening to the disk on start up and it makes a fan-like noise and has a slight vibration but I don't think I hear the click-ity click noise of the head reading the drive.
Any tips on trying to salvage its contents?

You may have ordered what you though was exactly the same thing as what you had, but the interface electronics in it are apparently NOT the same, rendering the drive unreadable unless you want to re-partition and re-format it first (wiping all the data in the process).

Delete User ID that does not have an associated password

We need to delete some user names that do not have associated passwords from our pull down box user names. All attempts to do so has only resulted in more user names with the password included.

User ID's that don't have associated Passwords saved, would be saved as '''Form data'''.
See this: <br />https://support.mozilla.com/en-US/kb/Form%20autocomplete#w_deleting-individual-form-entries

I need help to change user name, it does not belong to this account it belongs to my employee.

Similar Messages

Maybe you are looking for