I need help to delete my account in sap hanna virtual machine

Problems by just deleting my account on aws.amazon but forgot to delete the intancia in HANA sap, she is now open and the cost is getting too high, I try to delete or disable the instance however an error occurs and the message "An error occurred, contact your SAP Cloud Appliance Library operator "
someone help me know how I delete my account and end up with the cost of vitual machine.
thank you
cleber

Hi Stanimir,
i have one instance, the status is instance operation Failed, Operation Terminate failed on steps Terminate with message: AMAZON: AWS was not able to validate the provided access credentials.
i send some images from my configuration:
thanks, obrigado

Similar Messages

HT201269 I'm not a tech person, but need help with my Itunes account in transferring money and downloads onto new phone I purchased 2 weeks ago when my Iphone was stolen. I don't know how to get the money or music on new phone?

Need help with Itunes transferrs and can I use my Edge phone as a router?

I'm not a tech person, but need help with my Itunes account in transferring money and downloads onto new phone
Is this an iPhone?
Set it up using the AppleID you used on the previous iPhone.

My grandma is a new apple user and she needs help making an apple account.

my grandma is a new apple user and she needs help making an apple account.

She should call Apple support or visit the Genius Bar at an Apple store (make an appointment first at http://apple.com/retail). They will walk her through the process.

Need help On Triggers/Change pointers in SAP

Hi Experts,
I Need help On Triggers/Change pointers in SAP.
I have a requirement as soon as an entry is created in one of the Standard SAP table it should check against my Ztable and update and create the corresponding entry in another Ztable.
Can some one help me out on this with the syntax and how to do it

Hi,
Check whether you have any enhancement option (BADI, user exit, Customer enhancement etc) in the program which is used to save the data in the SAP standard table. If so, then try to write your code in that appropriate enhancement.

Need Help W/ Different Signatures & Accounts Using Mail Program

Hi all!
I have 2 questions:
1) Say I send an email from [email protected], but I also have an account with [email protected] in this mail program with a separate mailbox. When I compose my new email address from the mailbox for [email protected] address, the account selected is [email protected], instead. I know there is a way to fix this, but I can't figure out how to do it.
2) I have different signatures for each of my multiple email addresses in my Mail program. Is there a way to make each one the automatic signature for the account it is being sent from?
I am using the 1.3.11 (v622/624) version of mail on my G4 Mac Mini.
Thanks for any help anyone can give me!

Hi,
I'm back trying to get some much needed help. Now I'm getting this message when trying to open Premire Elements 3.0 from my C drive. I get the message "Sorry a serious error has occurred that requires Premier Elements to shut down. We will attempt to save your current project." When clicking on OK or the closing X it shuts down. I tried the advice that I received in this forum. I tried deleting "workingset.prsl" . Instead of deleting it I dragged it out of the "Styles folder and onto my desktop. I didn't delete it for fear that I would cause myself more problems. This way if it didn't work I could put it back into the "Styles folder which I did because it didn't work. I'm desperate now. I'm making a video of our 50th wedding anniversary that I have been working on for over a year and now I can't get it opened.
Larry

Need help with merging itunes accounts.

Hello. I was wondering if any of you mac experts can help me. My husband and I recently purchased a new mac and are having trouble figuring out how to merge our information into our computer's itunes. I set up the computer under my apple ID/email. However we both have separate apple id's linked with the same bank account information. The problem is, itunes on our computer isn't recognizing any of the purchases through my husband's apple id, even though they were paid for through the same account. I haven't been able to figure out whether or not I can add his apple id/email to itunes and merge the two, since a substantial amount of music/apps/etc were purchased under his ID. Surely it's possible to have more than on apple id on one family's computer? Anyone know? Hopefully I worded this clearly enough. Thanks!

Open the NetInfo Manager in the /Applications/Utilities/ folder, click the padlock, type in your password, and then locate that account in the list of users. Delete that account and only that account; don't make any other changes. The account's home folder will remain on the drive.
(11474)

Need help troubleshooting imap/gmail account

For reasons not worth getting into I changed my port setting from 25 to 587 (I think) to 25 again. Ever since, I can't get mail to sync with my gmail account.
I have the right account name (gmail address), the right server (imap.gmail.com), the right password, the right server (smtp.gmail.com). I have it set to port 25.
I have turned off (and on) SSL, and checked (and unchecked) "use only this server."
I have not typed in an "Imap path prefix," but don't think I ever did. Any thoughts?

I believe I switched it to 587--whatever number Verizon advised. they they told me that imap accounts were not affected by the 25 ban, so I switched back to 25.
I've fixed the problem however, by deleting the account and starting over, resetting all the accounts online with google and then starting from scratch w/Mail. (Port is now 995.) Thanks for the help.

Need Help to delet sort key! Please help!

Hi,
I have a problem in the following program.
Source Code:
t-belnr = bsid-zuonr.
SPLIT t-belnr at '#' into wk_belnr wk_x_belnr.
CLEAR t-belnr.
    t-belnr = wk_belnr.
    t-xblnr = bsid-belnr.
    IF t-belnr NE space.
      s-belnr      = t-belnr.
    ELSE.
      t-belnr      = t-xblnr.
      s-belnr      = t-xblnr.
    ENDIF.
IF t-xblnr NE space.                                    "WD041005a
      s-xblnr      = t-xblnr.                               "WD041005a
    ELSE.                                                   "WD041005a
      s-xblnr      = t-belnr.                               "WD041005a
    ENDIF.                                                  "WD041005a
    WHILE s-xblnr(1) EQ '0'.                            "INS MG130606
      SHIFT s-xblnr LEFT.                               "INS MG130606
    ENDWHILE.                                "INS MG130606
In the final ALV.
If first colum (t-zuonr) (sort key for the document )is blank, the document need to be deleted.
Question:
How can I write the code to deleted the t-zuonr when it is space?
Please help!!!
Thank you!!

Try as below:
DELETE <itab> WHERE <fld> IS INITIAL.
i.e
DELETE t WHERE zuonr IS INITIAL.
Kind Regards
Eswar

Hey I need help! my icloud account got hacked! please! I cant restore my phone because I need the icloud password! I dont know how reach out to a apple employee!

HELP! MY ACCOUNT GOT HACKED! PLEASE IF A APPLE WORKER IS READING THIS I NEED HELP ASAP! PLEASE PLEASE! I HAVE THE MOST IMPORTANT PHOTOS OF MUMUM WHO PASSED LAST YEAR BACKED UP! PLEASE PLEASE PLEASE! MY EMAIL WAS [email protected] and now its all gone-- pleaseeeeeee! someone has got to be there!

You need to contact Apple's Account Security team. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
(112448)

Forgot passcode to email profile, need it to delete email account.

I am trying to delete an email account on my iPhone 4 running iOS 7.1. I have an email profile which is preventing me from deleting the account. The profile asks for a 4 character passcode, which I do not recall. How do I reset this passcode, look it up, or work around it?

Why would you need a POP account?

Need help on deleting after exporting to IDML

Hi Forum,
I have a script to export all the "indesign files" found inside the folder... and then remove all the indesign files...
Instead, Can i have a help to delete....
the indesign file after exporting to IDML and then
continue opening the next indesign file, exporting to IDML and deleting it...
then continue file3....
The below is the script open indesign files and export to idml and then remove all the files inside the folder Desktop/GENERAL_CS6-IDML/IN_CS6
var mySourceFolder = Folder("Desktop/GENERAL_CS6-IDML/IN_CS6");
var myOutFolder = Folder("Desktop/Completed");
//var Indd_files = get_Files(mySourceFolder,[], ".indd");
var Indd_files = mySourceFolder.getFiles (/\.indd|\.INDD/i);
//var Indd_files = get_Files(mySourceFolder,[], ".indd");
if(Indd_files.length>0)
    for(var w=0;w<Indd_files.length;w++)
        try{
             app.scriptPreferences.userInteractionLevel = UserInteractionLevels.neverInteract;
            myDoc = app.open(File(Indd_files[w]));
             app.scriptPreferences.userInteractionLevel = UserInteractionLevels.neverInteract;
             var myDocNam = stripExt((Indd_files[w].name).replace(/%20/g," "))+"idml";
             myDoc.exportFile(ExportFormat.INDESIGN_MARKUP, (File(myOutFolder+"/"+myDocNam)));
//          myDoc.save(File(myOutFolder+"/"+myDocNam));
            app.activeDocument.close(SaveOptions.no);
        }catch(E){}
try {
var copyFolder1 = Folder("Desktop/GENERAL_CS6-IDML/IN_CS6");
var myFiles2 = copyFolder1.getFiles(/\.indd|\.INDD/i);
for ( i = myFiles2.length-1; i >= 0 ; i-- ){
myFiles2[i].remove();
} catch (e) {}
Many thanks for the support..

I hope this is what you expected.
You can try the following code:
var mySourceFolder = Folder("Desktop/GENERAL_CS6-IDML/IN_CS6");
var myOutFolder = Folder("Desktop/Completed");
//var Indd_files = get_Files(mySourceFolder,[], ".indd");
var Indd_files = mySourceFolder.getFiles (/\.indd|\.INDD/i);
//var Indd_files = get_Files(mySourceFolder,[], ".indd");
if(Indd_files.length>0)
    for(var w=0;w<Indd_files.length;w++)
        try{
             app.scriptPreferences.userInteractionLevel = UserInteractionLevels.neverInteract;
             var myFile = File(Indd_files[w]);
            myDoc = app.open(myFile);
             app.scriptPreferences.userInteractionLevel = UserInteractionLevels.neverInteract;
             var myDocNam = stripExt((Indd_files[w].name).replace(/%20/g," "))+"idml";
             myDoc.exportFile(ExportFormat.INDESIGN_MARKUP, (File(myOutFolder+"/"+myDocNam)));
            app.activeDocument.close(SaveOptions.no);
            myFile.remove();
        }catch(E){}
Green4ever

Need help with recovering old account that e-mail is no longer valid. Birth date on account is not correct.

Does anyone know how to get an old account password when all the information on the account is not accurate and the e-mail address is no longer valid.

If none of the following will work If you forgot your Apple ID password (which sounds likely) contact Apple support: Apple ID: Contacting Apple for help with Apple ID account security

New to sap - need help in configure backup strategy for SAP XI server.

hi gurus
being a netweaver guy, recently i have been given the responsibility of few basis activities.like database backup.
can any one tell me clear procedure to take both daily online and weekend full offline backup of oracle in to disk first and then to tape. i have seen in the internet material few discussing about brbackup and few about sap DB13. i am totally confused which one to use, and which is good. please help
akhil

Hi,
welcome on board as SAP Netweaver guy,
don't be confused both DB13 and BRtools are the same both of them will call brbackup.
to configure the brtools you have to change in your brtools profiles located at %ORACLE_HOME%/dbs
please before changing any thing take backup from that folder.
- to take the backup to disk then to tape you will need extra backup software, because using the SAP slandered tools you have to select either Disk or Tape.
Thanks
Sherif

Need help in developing mobile app using SAP

Hi
I have a team of Android, iOS and Windows developers and we are planning to start developing mobile using SAP and SAP Fiori. Need help in getting started with SAP mobile development like i need plugins and development kits that i need to use.
Thanks
Ram

Hi,
What help needed ?
For SAP Fiori Use this link : http://scn.sap.com/docs/DOC-41598
For SAP Fiori Installation and Configuration Steps: http://scn.sap.com/community/mobile/blog/2014/06/10/fiori-technical-installation-and-configuration-of-one-app-from-a--z
Which Software you will use to develop Mobile Apps in SAP Platform ?So that i will suggest what to do ..
Regards
Lokesh

Need help: Unable to handle kernel paging request at virtual address; javac

Hi
we're working with apache tomcat under linux mandrake 10. (x86)
when our webapp get recompiled the server stop responding
(web server, telnet, etc... are down, but the server is pingable)
after a hard reboot , we get this message in var/log/messages :
Unable to handle kernel paging request at virtual address 02000064
kernel: printing eip:
kernel: c018e379
kernel: *pde = 00000000
kernel: Oops: 0000 [#1]
kernel: CPU: 1
kernel: EIP: 0060:[proc_pid_stat+137/928] Not tainted VLI
kernel: EIP: 0060:[<c018e379>] Not tainted VLI
kernel: EFLAGS: 00010286
kernel: EIP is at proc_pid_stat+0x89/0x3a0
kernel: eax: 00000000 ebx: 02000000 ecx: d85ac000 edx: 92960700
kernel: esi: d11ea6f0 edi: ded440a0 ebp: cf0ddf44 esp: cf0ddee4
kernel: ds: 007b es: 007b ss: 0068
kernel: Process javac (pid: 2415, threadinfo=cf0dc000 task=d11ea6f0)
kernel: Stack: c0143d5a c1259e78 00000000 c1259e78 c0343980 0000015b 00000000 cf0ddf40
attached ther is kernel messages, pci , dmesg.
Thanks
Massimo TRENTO
Apache Tomcat/4.1.30
j2sdk1.4.2_01
kernel 2.6.3-7mdksmp #1 SMP
--- DMESG ---
00100000 - 000000001f6f0000 (usable)
BIOS-e820: 000000001f6f0000 - 000000001f6fb000 (ACPI data)
BIOS-e820: 000000001f6fb000 - 000000001f700000 (ACPI NVS)
BIOS-e820: 000000001f700000 - 000000001f780000 (usable)
BIOS-e820: 000000001f780000 - 0000000020000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
503MB LOWMEM available.
found SMP MP-table at 000f7920
hm, page 000f7000 reserved twice.
hm, page 000f8000 reserved twice.
hm, page 0009f000 reserved twice.
hm, page 000a0000 reserved twice.
On node 0 totalpages: 128896
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 124800 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI present.
ACPI: RSDP (v000 PTLTD ) @ 0x000f7980
ACPI: RSDT (v001 PTLTD RSDT 0x00050000 LTP 0x00000000) @ 0x1f6f74ed
ACPI: FADT (v001 FSC D156x 0x00050000 0x000f4240) @ 0x1f6f751d
ACPI: MADT (v001 FSC APIC 0x00050000 CSF 0x00000000) @ 0x1f6faf76
ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x00050000 LTP 0x00000001) @ 0x1f6fafd8
ACPI: DSDT (v001 FSC D156x 0x00050000 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0xf008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 15:2 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
Using ACPI for processor (LAPIC) configuration information
Intel MultiProcessor Specification v1.1
Virtual Wire compatibility mode.
OEM ID: Product ID: APIC at: 0xFEE00000
I/O APIC #2 Version 32 at 0xFEC00000.
Enabling APIC mode: Flat. Using 1 I/O APICs
Processors: 2
Built 1 zonelists
Kernel command line: auto BOOT_IMAGE=linux-nonfb ro root=301 noapic devfs=mount acpi=ht resume=/dev/hda5
Initializing CPU#0
PID hash table entries: 2048 (order 11: 16384 bytes)
Detected 2793.223 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Memory: 504916k/515584k available (1920k kernel code, 9820k reserved, 892k data, 288k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 5537.79 BogoMIPS
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 225k freed
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU#0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU#0: Thermal monitoring enabled
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09
per-CPU timeslice cutoff: 1462.56 usecs.
task migration cache decay timeout: 2 msecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Booting processor 1/1 eip 3000
Initializing CPU#1
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 5570.56 BogoMIPS
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU#1: Intel P4/Xeon Extended MCE MSRs (12) available
CPU#1: Thermal monitoring enabled
CPU1: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09
Total of 2 processors activated (11108.35 BogoMIPS).
cpu_sibling_map[0] = 1
cpu_sibling_map[1] = 0
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 2792.0645 MHz.
..... host bus clock speed is 199.0474 MHz.
checking TSC synchronization across 2 CPUs: passed.
Starting migration thread for cpu 0
Starting migration thread for cpu 1
Brought up 1 CPUs
NET: Registered protocol family 16
EISA bus registered
PCI: PCI BIOS revision 2.10 entry at 0xfd8cb, last bus=3
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040211
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Disabled
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Transparent bridge - 0000:00:1e.0
PCI: Discovered primary peer bus 01 [IRQ]
PCI: Using IRQ router PIIX/ICH [8086/24d0] at 0000:00:1f.0
PCI: IRQ 0 for device 0000:00:1f.1 doesn't match PIRQ mask - try pci=usepirqmask
PCI: Found IRQ 10 for device 0000:00:1f.1
PCI: Sharing IRQ 10 with 0000:00:1d.2
PCI: Sharing IRQ 10 with 0000:00:1f.2
PCI: Sharing IRQ 10 with 0000:02:01.0
SBF: Simple Boot Flag extension found and enabled.
SBF: Setting boot flags 0x1
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: disabled - APM is not SMP safe.
Starting balanced_irq
ikconfig 0.7 with /proc/config*
VFS: Disk quotas dquot_6.5.1
devfs: 2004-01-31 Richard Gooch ([email protected])
devfs: boot_options: 0x1
Initializing Cryptographic API
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
pty: 1024 Unix98 ptys configured
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH5: IDE controller at PCI slot 0000:00:1f.1
PCI: Found IRQ 10 for device 0000:00:1f.1
PCI: Sharing IRQ 10 with 0000:00:1d.2
PCI: Sharing IRQ 10 with 0000:00:1f.2
PCI: Sharing IRQ 10 with 0000:02:01.0
ICH5: chipset revision 2
ICH5: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x3000-0x3007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x3008-0x300f, BIOS settings: hdc:DMA, hdd:pio
hda: WDC WD800LB-07DNA2, ATA DISK drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: LITE-ON COMBO LTC-48161H, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
ICH5-SATA: IDE controller at PCI slot 0000:00:1f.2
PCI: Found IRQ 10 for device 0000:00:1f.2
PCI: Sharing IRQ 10 with 0000:00:1d.2
PCI: Sharing IRQ 10 with 0000:00:1f.1
PCI: Sharing IRQ 10 with 0000:02:01.0
ICH5-SATA: chipset revision 2
ICH5-SATA: 100% native mode on irq 10
ide2: BM-DMA at 0x3010-0x3017, BIOS settings: hde:pio, hdf:pio
ide3: BM-DMA at 0x3018-0x301f, BIOS settings: hdg:pio, hdh:pio
hda: max request size: 1024KiB
hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 >
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
EISA: Probing bus 0 at eisa0
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
NET: Registered protocol family 1
BIOS EDD facility v0.13 2004-Mar-09, 1 devices found
Please report your BIOS at http://linux.dell.com/edd/results.html
PM: Reading pmdisk image.
PM: Resume from disk failed.
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
SCSI subsystem initialized
libata version 1.00 loaded.
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: hda1: orphan cleanup on readonly fs
ext3_orphan_cleanup: deleting unreferenced inode 1038473
ext3_orphan_cleanup: deleting unreferenced inode 1038472
ext3_orphan_cleanup: deleting unreferenced inode 1038471
ext3_orphan_cleanup: deleting unreferenced inode 1038470
ext3_orphan_cleanup: deleting unreferenced inode 1038469
ext3_orphan_cleanup: deleting unreferenced inode 1038467
ext3_orphan_cleanup: deleting unreferenced inode 1038466
ext3_orphan_cleanup: deleting unreferenced inode 1038464
ext3_orphan_cleanup: deleting unreferenced inode 1038463
ext3_orphan_cleanup: deleting unreferenced inode 1038462
ext3_orphan_cleanup: deleting unreferenced inode 1038461
ext3_orphan_cleanup: deleting unreferenced inode 1038460
ext3_orphan_cleanup: deleting unreferenced inode 1038459
ext3_orphan_cleanup: deleting unreferenced inode 1038458
ext3_orphan_cleanup: deleting unreferenced inode 1038457
ext3_orphan_cleanup: deleting unreferenced inode 1038456
ext3_orphan_cleanup: deleting unreferenced inode 1038455
ext3_orphan_cleanup: deleting unreferenced inode 1038454
ext3_orphan_cleanup: deleting unreferenced inode 973782
EXT3-fs: hda1: 19 orphan inodes deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
Mounted devfs on /dev
Freeing unused kernel memory: 288k freed
Real Time Clock Driver v1.12
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1
PCI: Found IRQ 9 for device 0000:00:1d.0
PCI: Sharing IRQ 9 with 0000:00:02.0
PCI: Sharing IRQ 9 with 0000:00:1d.3
uhci_hcd 0000:00:1d.0: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: irq 9, io base 00001400
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
PCI: Found IRQ 11 for device 0000:00:1d.1
uhci_hcd 0000:00:1d.1: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: irq 11, io base 00001800
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
PCI: Found IRQ 10 for device 0000:00:1d.2
PCI: Sharing IRQ 10 with 0000:00:1f.1
PCI: Sharing IRQ 10 with 0000:00:1f.2
PCI: Sharing IRQ 10 with 0000:02:01.0
uhci_hcd 0000:00:1d.2: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: irq 10, io base 00001c00
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
PCI: Found IRQ 9 for device 0000:00:1d.3
PCI: Sharing IRQ 9 with 0000:00:02.0
PCI: Sharing IRQ 9 with 0000:00:1d.0
uhci_hcd 0000:00:1d.3: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: irq 9, io base 00002000
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
PCI: Found IRQ 9 for device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: EHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: irq 9, pci mem e0004000
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
EXT3 FS on hda1, internal journal
Adding 522072k swap on /dev/hda5. Priority:-1 extents:1
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel 865 Chipset.
agpgart: Maximum main memory to use for agp memory: 431M
agpgart: Detected 8060K stolen memory.
agpgart: AGP aperture is 128M @ 0xf0000000
Supermount version 2.0.4 for kernel 2.6
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Intel(R) PRO/1000 Network Driver - version 5.2.30.1-k2
Copyright (c) 1999-2004 Intel Corporation.
PCI: Found IRQ 10 for device 0000:02:01.0
PCI: Sharing IRQ 10 with 0000:00:1d.2
PCI: Sharing IRQ 10 with 0000:00:1f.1
PCI: Sharing IRQ 10 with 0000:00:1f.2
PCI: Setting latency timer of device 0000:02:01.0 to 64
eth0: Intel(R) PRO/1000 Network Connection
inserting floppy driver for 2.6.3-7mdksmp
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
hdc: ATAPI 48X DVD-ROM CD-R/RW CD-MRW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
drivers/usb/core/usb.c: registered new driver hiddev
drivers/usb/core/usb.c: registered new driver hid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
NET: Registered protocol family 17
e1000: eth0 NIC Link is Up 100 Mbps Half Duplex
PCI: Found IRQ 5 for device 0000:00:1f.5
PCI: Sharing IRQ 5 with 0000:00:1f.3
PCI: Setting latency timer of device 0000:00:1f.5 to 64
intel8x0_measure_ac97_clock: measured 49851 usecs
intel8x0: clocking to 48000
NET: Registered protocol family 10
Disabled Privacy Extensions on device c037da00(lo)
IPv6 over IPv4 tunneling driver
Installing knfsd (copyright (C) 1996 [email protected]).
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).
atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).
atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
eth0: no IPv6 routers present
Neighbour table overflow.
Neighbour table overflow.
Neighbour table overflow.
Neighbour table overflow.
Neighbour table overflow.
Neighbour table overflow.
Neighbour table overflow.
Neighbour table overflow.
Neighbour table overflow.
Neighbour table overflow.
printk: 24045 messages suppressed.
Neighbour table overflow.
printk: 24276 messages suppressed.
Neighbour table overflow.
printk: 16555 messages suppressed.
Neighbour table overflow.
Neighbour table overflow.
Neighbour table overflow.
Neighbour table overflow.
Neighbour table overflow.
Neighbour table overflow.
Neighbour table overflow.
Neighbour table overflow.
Neighbour table overflow.
Neighbour table overflow.
printk: 24221 messages suppressed.
Neighbour table overflow.
printk: 24272 messages suppressed.
Neighbour table overflow.
printk: 15931 messages suppressed.
Neighbour table overflow.
Neighbour table overflow.
Neighbour table overflow.
Neighbour table overflow.
Neighbour table overflow.
Neighbour table overflow.
Neighbour table overflow.
Neighbour table overflow.
Neighbour table overflow.
Neighbour table overflow.
printk: 24289 messages suppressed.
Neighbour table overflow.
printk: 21235 messages suppressed.
Neighbour table overflow.
---- LSPCI ---
00:00.0 Host bridge: Intel Corp. 82865G/PE/P Processor to I/O Controller (rev 02)
00:02.0 VGA compatible controller: Intel Corp. 82865G Integrated Graphics Device (rev 02)
00:03.0 PCI bridge: Intel Corp. 82865G/PE/P Processor to PCI to CSA Bridge (rev 02)
00:1d.0 USB Controller: Intel Corp. 82801EB USB (rev 02)
00:1d.1 USB Controller: Intel Corp. 82801EB USB (rev 02)
00:1d.2 USB Controller: Intel Corp. 82801EB USB (rev 02)
00:1d.3 USB Controller: Intel Corp. 82801EB USB (rev 02)
00:1d.7 USB Controller: Intel Corp. 82801EB USB2 (rev 02)
00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB PCI Bridge (rev c2)
00:1f.0 ISA bridge: Intel Corp. 82801EB LPC Interface Controller (rev 02)
00:1f.1 IDE interface: Intel Corp. 82801EB Ultra ATA Storage Controller (rev 02)
00:1f.2 IDE interface: Intel Corp. 82801EB Ultra ATA Storage Controller (rev 02)
00:1f.3 SMBus: Intel Corp. 82801EB SMBus Controller (rev 02)
00:1f.5 Multimedia audio controller: Intel Corp. 82801EB AC'97 Audio Controller (rev 02)
02:01.0 Ethernet controller: Intel Corp.: Unknown device 1019
-- LSMOD --
Module Size Used by
nfsd 175840 8
exportfs 7552 1 nfsd
md5 4864 1
ipv6 251392 29
snd-seq-oss 33568 0
snd-seq-midi-event 8704 1 snd-seq-oss
snd-seq 55696 4 snd-seq-oss,snd-seq-midi-event
snd-pcm-oss 53316 0
snd-mixer-oss 19008 1 snd-pcm-oss
snd-intel8x0 34440 0
snd-ac97-codec 59588 1 snd-intel8x0
snd-pcm 97440 2 snd-pcm-oss,snd-intel8x0
snd-timer 26660 2 snd-seq,snd-pcm
gameport 5664 1 snd-intel8x0
snd-page-alloc 12996 2 snd-intel8x0,snd-pcm
snd-mpu401-uart 8320 1 snd-intel8x0
snd-rawmidi 25248 1 snd-mpu401-uart
snd-seq-device 9032 3 snd-seq-oss,snd-seq,snd-rawmidi
snd 55492 12 snd-seq-oss,snd-seq-midi-event,snd-seq,snd-pcm-oss,snd-mixer-oss,snd-intel8x0,snd-ac97-codec,snd-pcm,snd-timer,snd-mpu401-uart,snd-rawmidi,snd-seq-device
soundcore 10560 1 snd
af_packet 22632 0
hid 55360 0
raw 8640 1
ide-floppy 19776 0
ide-tape 36752 0
ide-cd 41764 0
cdrom 38272 1 ide-cd
floppy 61620 0
e1000 83460 0
supermount 39856 1
intel-agp 18364 1
agpgart 32460 2 intel-agp
ehci-hcd 25572 0
uhci-hcd 31856 0
usbcore 103228 5 hid,ehci-hcd,uhci-hcd
rtc 13640 0
ext3 114216 2
jbd 61976 1 ext3
sd_mod 17696 0
ata_piix 8836 0
libata 40256 1 ata_piix,[permanent]
scsi_mod 117104 2 sd_mod,libata
----- /var/log/kernel/warnings -------
Oct 5 10:16:47 nsilaslin02 kernel: printing eip:
Oct 5 10:16:47 nsilaslin02 kernel: c018e379
Oct 5 10:16:47 nsilaslin02 kernel: Oops: 0000 [#1]
Oct 5 10:16:47 nsilaslin02 kernel: CPU: 1
Oct 5 10:16:47 nsilaslin02 kernel: EIP: 0060:[proc_pid_stat+137/928] Not tainted VLI
Oct 5 10:16:47 nsilaslin02 kernel: EIP: 0060:[<c018e379>] Not tainted VLI
Oct 5 10:16:47 nsilaslin02 kernel: EFLAGS: 00010286
Oct 5 10:16:47 nsilaslin02 kernel: EIP is at proc_pid_stat+0x89/0x3a0
Oct 5 10:16:47 nsilaslin02 kernel: eax: 00000000 ebx: 02000000 ecx: d85ac000 edx: 92960700
Oct 5 10:16:47 nsilaslin02 kernel: esi: d11ea6f0 edi: ded440a0 ebp: cf0ddf44 esp: cf0ddee4
Oct 5 10:16:47 nsilaslin02 kernel: ds: 007b es: 007b ss: 0068
Oct 5 10:16:47 nsilaslin02 kernel: Process javac (pid: 2415, threadinfo=cf0dc000 task=d11ea6f0)
Oct 5 10:16:47 nsilaslin02 kernel: Stack: c0143d5a c1259e78 00000000 c1259e78 c0343980 0000015b 00000000 cf0ddf40
Oct 5 10:16:47 nsilaslin02 kernel: 52143e93 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Oct 5 10:16:47 nsilaslin02 kernel: 00000000 00000000 000000d0 00001000 000000d0 d11ea6f0 00000400 de64f060
Oct 5 10:16:47 nsilaslin02 kernel: Call Trace:
Oct 5 10:16:47 nsilaslin02 kernel: [buffered_rmqueue+234/400] buffered_rmqueue+0xea/0x190
Oct 5 10:16:47 nsilaslin02 kernel: [<c0143d5a>] buffered_rmqueue+0xea/0x190
Oct 5 10:16:47 nsilaslin02 kernel: [proc_info_read+75/320] proc_info_read+0x4b/0x140
Oct 5 10:16:47 nsilaslin02 kernel: [<c018b60b>] proc_info_read+0x4b/0x140
Oct 5 10:16:47 nsilaslin02 kernel: [vfs_read+142/224] vfs_read+0x8e/0xe0
Oct 5 10:16:47 nsilaslin02 kernel: [<c015bf2e>] vfs_read+0x8e/0xe0
Oct 5 10:16:47 nsilaslin02 kernel: [sys_read+46/80] sys_read+0x2e/0x50
Oct 5 10:16:47 nsilaslin02 kernel: [<c015c14e>] sys_read+0x2e/0x50
Oct 5 10:16:47 nsilaslin02 kernel: [sysenter_past_esp+82/121] sysenter_past_esp+0x52/0x79
Oct 5 10:16:47 nsilaslin02 kernel: [<c010b1b9>] sysenter_past_esp+0x52/0x79
Oct 5 10:16:47 nsilaslin02 kernel:
Oct 5 10:16:47 nsilaslin02 kernel: Code: 00 00 8b 7e 68 85 ff 74 09 57 e8 b3 5f f9 ff 59 89 c7 8b 8e 24 03 00 00 85 c9 74 38 8b 81 98 00 00 00 89 45 c8 8b 59 04 8b 51 08 <0f> bf 43 64 0f bf 5b 66 c1 e0 14 09 d8 01 d0 89 c1 c1 e9 14 0f
Oct 5 10:30:32 nsilaslin02 kernel: Linux version 2.6.3-7mdksmp ([email protected]) (gcc version 3.3.2 (Mandrake Linux 10.0 3.3.2-6mdk)) #1 SMP Wed Mar 17 14:24:28 CET 2004
Oct 5 10:30:32 nsilaslin02 kernel: BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
Oct 5 10:30:32 nsilaslin02 kernel: BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
Oct 5 10:30:32 nsilaslin02 kernel: BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
Oct 5 10:30:32 nsilaslin02 kernel: BIOS-e820: 0000000000100000 - 000000001f6f0000 (usable)
Oct 5 10:30:32 nsilaslin02 kernel: BIOS-e820: 000000001f6f0000 - 000000001f6fb000 (ACPI data)
Oct 5 10:30:32 nsilaslin02 kernel: BIOS-e820: 000000001f6fb000 - 000000001f700000 (ACPI NVS)
Oct 5 10:30:32 nsilaslin02 kernel: BIOS-e820: 000000001f700000 - 000000001f780000 (usable)
Oct 5 10:30:32 nsilaslin02 kernel: BIOS-e820: 000000001f780000 - 0000000020000000 (reserved)
Oct 5 10:30:32 nsilaslin02 kernel: BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
Oct 5 10:30:32 nsilaslin02 kernel: BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
Oct 5 10:30:32 nsilaslin02 kernel: BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
Oct 5 10:30:32 nsilaslin02 kernel: BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
Oct 5 10:30:32 nsilaslin02 kernel: hm, page 000f7000 reserved twice.
Oct 5 10:30:32 nsilaslin02 kernel: hm, page 000f8000 reserved twice.
Oct 5 10:30:32 nsilaslin02 kernel: hm, page 0009f000 reserved twice.
Oct 5 10:30:32 nsilaslin02 kernel: hm, page 000a0000 reserved twice.
Oct 5 10:30:32 nsilaslin02 kernel: On node 0 totalpages: 128896
Oct 5 10:30:32 nsilaslin02 kernel: DMA zone: 4096 pages, LIFO batch:1
Oct 5 10:30:32 nsilaslin02 kernel: Normal zone: 124800 pages, LIFO batch:16
Oct 5 10:30:32 nsilaslin02 kernel: HighMem zone: 0 pages, LIFO batch:1
Oct 5 10:30:33 nsilaslin02 kernel: Processor #0 15:2 APIC version 20
Oct 5 10:30:33 nsilaslin02 kernel: Processor #1 15:2 APIC version 20
Oct 5 10:30:33 nsilaslin02 kernel: Enabling APIC mode: Flat. Using 1 I/O APICs
Oct 5 10:30:33 nsilaslin02 kernel: Built 1 zonelists
Oct 5 10:30:33 nsilaslin02 kernel: Kernel command line: auto BOOT_IMAGE=linux-nonfb ro root=301 noapic devfs=mount acpi=ht resume=/dev/hda5
Oct 5 10:30:33 nsilaslin02 kernel: PID hash table entries: 2048 (order 11: 16384 bytes)
Oct 5 10:30:33 nsilaslin02 kernel: Detected 2793.223 MHz processor.
Oct 5 10:30:33 nsilaslin02 kernel: Console: colour VGA+ 80x25
Oct 5 10:30:33 nsilaslin02 kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok.
Oct 5 10:30:33 nsilaslin02 kernel: Calibrating delay loop... 5537.79 BogoMIPS
Oct 5 10:30:33 nsilaslin02 kernel: Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Oct 5 10:30:33 nsilaslin02 kernel: Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Oct 5 10:30:33 nsilaslin02 kernel: POSIX conformance testing by UNIFIX
Oct 5 10:30:33 nsilaslin02 kernel: CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09
Oct 5 10:30:33 nsilaslin02 kernel: per-CPU timeslice cutoff: 1462.56 usecs.
Oct 5 10:30:33 nsilaslin02 kernel: task migration cache decay timeout: 2 msecs.
Oct 5 10:30:33 nsilaslin02 kernel: enabled ExtINT on CPU#0
Oct 5 10:30:33 nsilaslin02 kernel: ESR value before enabling vector: 00000000
Oct 5 10:30:33 nsilaslin02 kernel: ESR value after enabling vector: 00000000
Oct 5 10:30:33 nsilaslin02 kernel: Booting processor 1/1 eip 3000
Oct 5 10:30:33 nsilaslin02 kernel: masked ExtINT on CPU#1
Oct 5 10:30:33 nsilaslin02 kernel: ESR value before enabling vector: 00000000
Oct 5 10:30:33 nsilaslin02 kernel: ESR value after enabling vector: 00000000
Oct 5 10:30:33 nsilaslin02 kernel: Calibrating delay loop... 5570.56 BogoMIPS
Oct 5 10:30:33 nsilaslin02 kernel: CPU1: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09
Oct 5 10:30:33 nsilaslin02 kernel: cpu_sibling_map[0] = 1
Oct 5 10:30:33 nsilaslin02 kernel: cpu_sibling_map[1] = 0
Oct 5 10:30:33 nsilaslin02 kernel: Using local APIC timer interrupts.
Oct 5 10:30:33 nsilaslin02 kernel: calibrating APIC timer ...
Oct 5 10:30:33 nsilaslin02 kernel: ..... CPU clock speed is 2792.0645 MHz.
Oct 5 10:30:33 nsilaslin02 kernel: ..... host bus clock speed is 199.0474 MHz.
Oct 5 10:30:33 nsilaslin02 kernel: checking TSC synchronization across 2 CPUs: passed.
Oct 5 10:30:33 nsilaslin02 kernel: Starting migration thread for cpu 0
Oct 5 10:30:33 nsilaslin02 kernel: Starting migration thread for cpu 1
Oct 5 10:30:33 nsilaslin02 kernel: Brought up 1 CPUs
Oct 5 10:30:33 nsilaslin02 kernel: PCI: Probing PCI hardware
Oct 5 10:30:33 nsilaslin02 kernel: PCI: Probing PCI hardware (bus 00)
Oct 5 10:30:33 nsilaslin02 kernel: Transparent bridge - 0000:00:1e.0
Oct 5 10:30:33 nsilaslin02 kernel: PCI: IRQ 0 for device 0000:00:1f.1 doesn't match PIRQ mask - try pci=usepirqmask
Oct 5 10:30:33 nsilaslin02 kernel: pty: 1024 Unix98 ptys configured
Oct 5 10:30:33 nsilaslin02 kernel: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Oct 5 10:30:33 nsilaslin02 kernel: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Oct 5 10:30:33 nsilaslin02 kernel: RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
Oct 5 10:30:33 nsilaslin02 kernel: hda: WDC WD800LB-07DNA2, ATA DISK drive
Oct 5 10:30:33 nsilaslin02 kernel: Using anticipatory io scheduler
Oct 5 10:30:33 nsilaslin02 kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Oct 5 10:30:33 nsilaslin02 kernel: hdc: LITE-ON COMBO LTC-48161H, ATAPI CD/DVD-ROM drive
Oct 5 10:30:33 nsilaslin02 kernel: ide1 at 0x170-0x177,0x376 on irq 15
Oct 5 10:30:33 nsilaslin02 kernel: hda: max request size: 1024KiB
Oct 5 10:30:33 nsilaslin02 kernel: VFS: Mounted root (ext2 filesystem).
Oct 5 10:30:33 nsilaslin02 kernel: PCI: cache line size of 128 is not supported by device 0000:00:1d.7
Oct 5 10:30:33 nsilaslin02 kernel: hdc: ATAPI 48X DVD-ROM CD-R/RW CD-MRW drive, 2048kB Cache, UDMA(33)
Oct 5 10:30:33 nsilaslin02 kernel: ide-floppy driver 0.99.newide
Oct 5 10:30:39 nsilaslin02 kernel: atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).
Oct 5 10:30:39 nsilaslin02 kernel: atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
Oct 5 10:30:39 nsilaslin02 kernel: atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).
Oct 5 10:30:39 nsilaslin02 kernel: atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
Oct 5 10:30:50 nsilaslin02 kernel: Neighbour table overflow.
Oct 5 10:30:50 nsilaslin02 last message repeated 9 times
Oct 5 10:30:55 nsilaslin02 kernel: printk: 24045 messages suppressed.
Oct 5 10:30:55 nsilaslin02 kernel: Neighbour table overflow.
Oct 5 10:31:00 nsilaslin02 kernel: printk: 24276 messages suppressed.
Oct 5 10:31:00 nsilaslin02 kernel: Neighbour table overflow.
Oct 5 10:36:06 nsilaslin02 kernel: printk: 16555 messages suppressed.
Oct 5 10:36:06 nsilaslin02 kernel: Neighbour table overflow.
Oct 5 10:36:06 nsilaslin02 last message repeated 9 times
Oct 5 10:36:11 nsilaslin02 kernel: printk: 24221 messages suppressed.
Oct 5 10:36:11 nsilaslin02 kernel: Neighbour table overflow.
Oct 5 10:36:16 nsilaslin02 kernel: printk: 24272 messages suppressed.
Oct 5 10:36:16 nsilaslin02 kernel: Neighbour table overflow.
Oct 5 10:46:22 nsilaslin02 kernel: printk: 15931 messages suppressed.
Oct 5 10:46:22 nsilaslin02 kernel: Neighbour table overflow.
Oct 5 10:46:22 nsilaslin02 last message repeated 9 times
Oct 5 10:46:27 nsilaslin02 kernel: printk: 24289 messages suppressed.
Oct 5 10:46:27 nsilaslin02 kernel: Neighbour table overflow.
Oct 5 10:46:32 nsilaslin02 kernel: printk: 21235 messages suppressed.
Oct 5 10:46:32 nsilaslin02 kernel: Neighbour table overflow.

Java programs are run by a virtual machine which is running in userland. They don't "mess" with the kernel.
OTOH, each userland program interacts with the kernel through system calls, signals, pageing activity, ...
My guess is that it's either broken hardware, or a fault in the linux kernel.
Is the crash reproducible? Does ist always crash with the same error message, at the same "eip" location?
If the crashes are sporadic and non deterministic, with different error messages each time, then I'd say it's
a hardware problem. Otherwise, it could be a linux kernel software problem.

I need help to delete my account in sap hanna virtual machine

Similar Messages

Maybe you are looking for