I Need Help to OC my k7n2g-l
how can i overclock my computer until i can get a faster processor? i need al the help i can get... 8)
Read up on overclocking untill you feel really sure about yourself try Overclockers Forum and read what people are doing and also look around for tips on the site Also Here is another good site to look at. If your willing to cope with the lost of computer parts then go for it. But if you cant afford to replace parts is something goes wrong then dont even attempt it. Good luck on whatever you decide to do.
Similar Messages
-
MSI K7N2G-ILSR Problem! Need help!
Hi,i bought a K7N2G-ILSR last year when i was in Germany. This mainboard never worked as well... I wanted to work with Athlon XP 2500+ and Dual Channel 256MB+256MB=512MB 400 Mhz DDR-Ram. It hasn't worked when i first wanted to use and i changed the jumper to the securit mode than it worked but it has never opened with one button pushing.I was always trying to get screen vision with 3-5 closing and opening.One day i tried to get the jumper back and i tried to open but it never worked. I got the jumper securit again but again never worked. I tried everything but it never worked after that event. Normally i had to inform it at first and give it back or give it to the repairing but i couldn't have time. Now i have to do it this time. Now i want to change this or something else but in Turkey. I am living in Turkey and does MSI Support Centre change it or repair it? What can i do to get rid of this problem. Need help!
Thanks for your helps from now!MSI K7N2G-ILSR Mainboard 11X166
AMD Athlon XP 2500+
2X256 MB PC 3200 Twinmos
OnBoard Graphic Card
Samsung 40 GB 5400rpm HDD
300 Watt Power Supply
I dont have more infos but i can find out if you want... -
I need help with my K7N2G-ILSR Black screen
hey!
I need help with my Mainboard!
All the time when i want to start it it doesn't boot. You can listen to the noise of the fan and it is working but only black screen, also the LED says that the Ram is damaged red-green-red-red!
I have an Athlon XP 2400+
Volcano 9 Fan
512MB ram Kingston PC2700
512MB Ram Infineon PC2700
I read that the board doesn't support Kingston the first time and also i set the jumpers cleared CMOS and put the battery out. Also I put the Ram in different Dimms but still the same error.
The other things what i have aren't really important just that i have an enermax 431Watt. MSI wrote me that i have to put out the mainboard out of the case but why should i do this, the case is open right now and normally that shouldn't change anything. I read also some posts here and about new Ram but maybe there is someone who knows whats going on!
thanks for the reply to everyone
Regards
Jan(It's german say it like Yan)i can't even look on the screen because the screen is black, and how can I change the timings manualy from ram? man, i never heard about that I mean it's easy to overclock a cpu but how are you changing the timings of the Ram! If u can give me a webpage snf i will lock for it, or just descibe me how to do it, thanks a lot for the replies!
-
Need Help W/ Raid Configuration
I NEED HELP W/ MY RAID CONFIGURATION.
I HAVE THE K7N2 DELTA-ILSR MOBO W/ A XP2600+, I HAVE TWO 40 GIG HARDDRIVES THAT I WANT TO RAID 0 TOGHTER.
I HAVEN'T FOUND IN THE MANUALL HOW TO SET UP THE RAID ARREY, I DONT NO HOW TO SET THE DRIVER AS FAR AS SLAVE/MASTER SETTINGS, WITCH ONE NEEDS TO GO TO WITCH CHANNEL ( PRIMARY/SECONDARY/CS).
- EVERY TIME THAT I SET IT UP THE ARREY IS SHOWING ONLY 1 DRIVE, I BELIVE THAT RAID 0 SHOULD HAVE BOTH OF THE DRIVES AS 1 BIG DRIVE, CAN SOME ONE HELP ME W/ INSTARUCTIONS HOW TO CREATE THIS ARREY?
thanks guysI had RAID 0 set on my system. I used the MSI Live Update software to update my RAID controller because it said it needed it. It hung up in the middle of the update, so I let it sit for 24 hours. Finally I rebooted, & now it won't even see the drives. If you go with RAID 0, back up your data, and keep it backed up!!! I will say this, while it worked, it was really really fast!!! In order to make my RAID work (while it lasted) I used two SATA drives. I believe you can also use one ATA & 1 SATA instead of two SATA drives. If you use 1 ATA drive, set it to master & connect to IDE 3. This will be the only drive on that cable. During the boot up, you have to follow the prompt & press to enter the FastBuild (tm) Utility. Once there, you can choose Auto Setup & it will do the work for you. I must re-iterate, KEEP YOUR DATA BACKED UP!!!!!! I hope this helps. Good luck!
K7N2G-ISLR, AMD 2600+, Twin rapter 37gb hard drives, 1gb DDR-400, G-Force FX
5600 256mb AGP etc. -
Need help to develop Pythagoras theorem-
Hi i need help to develop proofs 2,3,4
of pythagoras theorems in java as demonstrations
These are applets can anyone help me with it or give me an idea of how to go about developing it -
the site is the following
http://www.uni-koeln.de/ew-fak/Mathe/Projekte/VisuPro/pythagoras/pythagoras.html
then double click on the screen to make it startPardon my ASCII art, but I've always liked the following, simple, geometric proof:
a b
---------------------------------------+
| | |
a| I | II |
| | |
---------------------------------------+
| | |
| | |
| | |
| | |
| | |
b| IV | III |
| | |
| | |
| | |
| | |
| | |
| | |
---------------------------------------+It almost goes without saying that I+II+III+IV == (a+b)^2, and II == IV == a*b,
I == a*a and III == b*b, showing that (a+b)^2 == a^2+a*b+a*b+b^2.
I hope the following sketch makes sense, stand back, ASCII art alert again: a b
---------------------------------------+
| . VI |
| . . |a
| V . |
| +
| |
| . |
b| . |
| |
| IX |
| . |
| . |b
| |
+ |
| . |
a| . . VII |
| VIII . |
---------------------------------------+
a bThe total area equals (a+b)^2 again and equals the sum of the smaller areas:
(a+b)^2 == V+VI+VII+VIII+IX. Let area IX be c^2 for whatever c may be.
V+VII == VI+VIII == a*b, so a^2+b^2+2*ab= c^2+2*a*b; IOW a^2+b^2 == c^2
Given this fundamental result, the others can easily be derived from this one,
or did I answer a question you didn't ask?
kind regards,
Jos -
I need help to find and open a job app that I exported, was able to fill out and sign and saved and now can't open it? What did I do wrong?
What file format did you export it to?
-
Need help to open audios attached in a PDF file
Hello
I just need help. I have ordered a reviewer online that has audios and texts in a pdf file. I was told to download the latest adobe reader on my computer. I have done the same thing on my ipad mini. I am not so technical with regards to these things. Therefore I need help. I can access the audios on my computer but not on my ipad.
I want to listen to audios with scripts or texts on them so i can listen to them when i am on the go. I was also informed that these files should work in any device. How come the audios doesnt work on my ipad.
Please help me on what to do.
ThanksAudio and video are not currently support on Adobe Reader. :-<
You need to buy a PDF reader that supports them. My suggestion is PDF Expert from Readdle ($US 9.99) -
Need help to open and look for file by name
Hi,
Im needing help to open a folder and look for a file (.txt) on this directory by his name ... The user ll type the partial name of file , and i need look for this file on the folder , and delete it ....
How can i look for the file by his name ?
Thx =)Hi ,
Sry ,, let me explain again ... I ll set the name of the files in the follow order ... Name_Serial_date_chanel.sxc ..
The user ll type the serial that he wants delete ...
I already figured out what i need guys .. thx for the help ^^
I used List Directory on advanced IO , to list all .. the Name is the same for all ... then i used Name_ concateneted with Serial(typed)* .. this command serial* ll list all serials equal the typed , in my case , ll exist only one , cuz its a count this serial .Then i pass the path to the delete , and its done !
Thx ^^ -
I need help, my ipod touch is not recognized by windows as a harddisk
i need help, my ipod touch is not recognized by windows like a memory card or a harddisk.
i would like to transfer the files from pc to my ipod touch without useing itunes.
as i see theres some people here that theires ipod touch are recongnzed as a digitl camra, mine is reconzied as nothing, some help plz.
Message was edited by: B0OmB0Om wrote:
ok but i still dont understed, only my itnes recongnize my ipod, when i go to " my cumputer, it dosent show up there, not even as a digital camra
Your Touch is working correctly. Currently, without unsupported third party hacks, the Touch has NO disc mode. It will only show up in iTunes.
how do i put programes and games in my ipod touch
Right now, you don't. The SDK is scheduled to be released in Feburary. Then developers will be able to write programs that will be loadable. -
Weird error message need help..
SO.. i havent updated my itunes in a while because i keep getting this weird message.. it comes up when im almost done installing the newest/newer versions of itunes. it says
"the feature you are trying to use is on a network resource that is unavailable" "click ok to try again or enter an alternate path to a folder containing the installation package 'iTunes.msi' in the box below"
now when ever i choose a file from the browse box it replies with this message "the file 'xxx' is not a valid installation package for the product iTunes. try to find the installation package iTunes.msi in a folder from which you can install iTunes."
no idea need help thanks
~~~lake
Message was edited by: DarkxFlamexCaster
Message was edited by: DarkxFlamexCaster+it comes up when im almost done installing the newest/newer versions of itunes. it says+ +"the feature you are trying to use is on a network resource that is unavailable" "click ok to try again or enter an alternate path to a folder containing the installation package 'iTunes.msi' in the box below"+
With that one, let's try the following procedure.
First, head into your Add/Remove programs and uninstall your QuickTime. If it goes, good. If it doesn't, we'll just attend to it when we attend to iTunes.
Next, download and install the Windows Installer CleanUp utility:
Description of the Windows Installer CleanUp Utility
Now launch Windows Installer CleanUp ("Start > All Programs > Windows Install Clean Up"), find any iTunes and/or QuickTime entries in the list of programs in CleanUp, select those entries, and click “remove”.
Next, we'll manually remove any leftover iTunes or QuickTime program files:
(1) Open Local Disk (C:) in Computer or whichever disk programs are installed on.
(2) Open the Program Files folder.
(3) Right-click the iTunes folder and select Delete and choose Yes when asked to confirm the deletion.
(4) Right-click the QuickTime folder and select Delete and choose Yes when asked to confirm the deletion. (Note: This folder may have already been deleted if QuickTime was successfully removed using Add/Remove Programs earlier.)
(5) Delete the QuickTime and QuicktimeVR files located in the C:\Windows\system32\ folder. Click Continue if Windows needs confirmation or permission to continue. (Note: These files may have already been deleted if QuickTime was successfully removed using Add/Remove Programs earlier.)
(6) Right-click on the Recycle Bin and on the shortcut menu, click Empty Recycle Bin.
(7) Restart your computer.
Now try another iTunes install. Does it go through properly now? -
I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?
Hold down the Option key while you boot your Mac. Then, it should show you a selection of devices. Click your flash drive and it will boot from that.
-
Need help adobe bridge cc output module
I need help. I have an assignment I'm held up on completing because the adobe cc bridge does not have the output modue I need. I followed the adobe instructions page to the letter. I copied and pasted the output module folder to the adobe bridge cc extensions folder in programs/commonfiles/adobe. The only thing is the instructions then say to paste the workspace file into the workspace folder located below the bridge extensions folder. I don't have a workspaces folder there or anywhere. I even tried must making one and adding the file to it, but no go. can someone PLEASE help me with this? I have an assignment due like now that requires the use of the output modue.thanks!
oh,my system is windows 8.1. sorry, lol.
-
Trying to create a Invoice based on Order need help Error -5002
the dreaded -5002 error is haunting me too! and I could not find a matching solution for this in the forum....
I need help quickly on this. I am trying to create invoices for some orders so the Base - Target relationship is retained. The orders I pick are all Open (DocStatus = O and the lines are all Open LineStatus = O)
here is my code
oInvoice.Lines.BaseEntry = 48
oInvoice.Lines.BaseLine = 0
oInvoice.Lines.BaseType = SAPbobsCOM.BoObjectTypes.oOrders
oInvoice.Lines.ItemCode = "A00001"
oInvoice.Lines.ItemDescription = "IBM Infoprint 1312"
'adding Line
oInvoice.Lines.Add
oInvoice.Lines.BaseEntry = 48
oInvoice.Lines.BaseLine = 1
oInvoice.Lines.BaseType = SAPbobsCOM.BoObjectTypes.oOrders
oInvoice.Lines.ItemCode = "A00002"
oInvoice.Lines.ItemDescription = "IBM Inforprint 1222"
'adding Line
oInvoice.Lines.Add
lRetCode = oInvoice.Add
If lRetCode <> 0 Then
gObjCompany.GetLastError lErrCode, sErrMsg
MsgBox (lErrCode & " " & sErrMsg)
End IfIndika,
Only set your base types...
(not items & description)
oInvoice.Lines.BaseEntry = 48
oInvoice.Lines.BaseLine = 0
oInvoice.Lines.BaseType = SAPbobsCOM.BoObjectTypes.oOrders
oInvoice.Lines.ItemCode = "A00001"
oInvoice.Lines.ItemDescription = "IBM Infoprint 1312"
'adding Line (to fill the second item line)
' the 1st line item is there by default
oInvoice.Lines.Add
oInvoice.Lines.BaseEntry = 48
oInvoice.Lines.BaseLine = 1
oInvoice.Lines.BaseType = SAPbobsCOM.BoObjectTypes.oOrders
oInvoice.Lines.ItemCode = "A00002"
oInvoice.Lines.ItemDescription = "IBM Inforprint 1222"
'DO NOT Add THIS line
' (only if you want to add a 3rd line item)
'''oInvoice.Lines.Add -> Don't add this
lRetCode = oInvoice.Add
If lRetCode <> 0 Then
gObjCompany.GetLastError lErrCode, sErrMsg
MsgBox (lErrCode & " " & sErrMsg)
End If
remember to add :
oInvoice.CardCode = "your BP"
oInvoice.DocDueDate = Now
oInvoiceDoc.CardCode = txtDOCBPCode.Text -
Installation of Photoshop update 13.1.2 for creative cloud fails with error code U44M1P7 I need help
I need help installing update 13.1.2 for Photoshop creative cloud, installation fails with error code: U44M1P7. Could someone please help?
Sorry to bother you.
I could find the answer after searching previous posts about this language problem.
Had to change my language in AAM profile and then download PS CS6 again ( english version ).
Then open the actual Photoshop and in preferences > interface you can besides the Dutch also option for English.
restart application and Voila.
Greetz, Jeroen -
Stored DB Procedure - Need help
Hi. I have a stored database package containing 2 functions. I need help with the function named ret_columns.
If you look at the code below you will see this function has two different FOR loops. The Select statement in FOR loop that is commented out works just fine, but when I try to use the uncommented select statement in it's place the Function returns NULL (or no records). However, if I run the Select statement in plain old SQL Plus it returns the rows I need. I don't get it.
Can anyone help me? I'm really stuck on this one.
-- PACKAGE BODY
CREATE OR REPLACE package body audit_table_info
as
function ret_tables return table_type is
t_t table_type;
i integer;
begin
i := 1;
for rec in (select distinct table_name
from all_triggers
where substr(trigger_name,1,9) = upper('tr_audit#')) loop
t_t(i).tableA := rec.table_name;
i := i+1;
end loop;
return t_t;
end;
function ret_columns return column_type is
c_t column_type;
i integer;
begin
i := 1;
-- for rec in (select distinct table_name column_name
-- from all_triggers
-- where substr(trigger_name,1,9) = upper('tr_audit#')) loop
for rec in (select distinct b.column_name column_name
from all_triggers a, all_tab_columns b
where a.table_owner = b.owner
and a.table_name = b.table_name
and substr(a.trigger_name,1,9) = upper('tr_audit#') and rownum < 5) loop
c_t(i).tableB := rec.column_name;
i := i+1;
end loop;
return c_t;
end;
end audit_table_info;
-- PACKAGE DEFINITION
CREATE OR REPLACE package Audit_Table_Info as
type table_rec is record( tableA all_tab_columns.TABLE_NAME%type);
type table_type is table of table_rec index by binary_integer;
function ret_tables return table_type;
type column_rec is record( tableB all_tables.TABLE_NAME%type);
type column_type is table of column_rec index by binary_integer;
function ret_columns return column_type;
end Audit_Table_Info;
/It works when I do this!!! I'm so confused.
Ok...so I did this:
1 create table test_columns as
2 (select b.column_name
3 from all_triggers a,
4 all_tab_columns b
5 where a.table_owner = b.owner
6 and a.table_name = b.table_name
7 and substr(a.trigger_name,1,9) = upper('tr_audit#')
8* and rownum < 5)
SQL> /
Table created.
Then altered the Function so the Select statement refers to this table:
function ret_columns return column_type is
c_t column_type;
i integer;
begin
i := 1;
for rec in (select distinct column_name
from test_columns) loop
c_t(i).tableB := rec.column_name;
i := i+1;
end loop;
return c_t;
end;
Again, any help would be greatly greatly appreciated!
Maybe you are looking for
-
Hello my fellow Apple product user's. My problem has been going on for about a month and half with my laptop locking up, file folders on my desktop loading slowly and my sleep button and other buttons on my dash board not responding. Where to being w
-
Font color preview not working?
I created a gradient and tried to save it for web, but the preview only showed me a dark orange color. That was the foreground color, but I don't know why that became the entire picture. Also, I saved it anyways, and when I opened the image using pic
-
HT4890 My iCloud isn't showing any of my pictures. How can I add them?
My iCloud account does not copy any of my pictures. When I log into in on the computer there is not a folder for pictures. How can I add it?
-
Do I have to finalize project in HD, it was taken with low resolution camera?
I have converted some old videos from tape for a movie project and the resolution isn't very good. Seems like a waste to save them in HD, is there an option not to finalize a project in 1080p? Thanks
-
Can anyone please explain to me the file strucure that iPhoto uses. I do not want to change things but I'd like to understand it at least. Thanks, Municher Power Mac 2 x 2.0 GHz Mac OS X (10.3.9)