I need help to replace my power supply for the hp pavilion elite m9510f

This computer has given me many problems since I bought it in '09. From graphic card fan issues, a hard drive crash, and now the power supply has failed.
I did the blow dryer trick but it still ends up breaking a week later. I want to know what new power supply should I buy. One that will be able to fit in the hp pavilion elite m9510f and is an upgrade to the 350w that it has. Maybe somthing under 60-70 dollars if possible. Thanks for any help.

It appears to be a normal case and motherboard. A normal ATX supply should work: http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&N=50001333&IsNodeId=1&Description=Computer...
Just an example of what is availble, but most any should work as long the physical dimensions match the one installed now.
{---------- Please click the "Thumbs Up" to say thanks for helping.
Please click "Accept As Solution" if my help has solved your problem. ----------}
This is a user supported forum. I am a volunteer and I do not work for HP.

Similar Messages

Does anyone know where can I get a replacement UK power supply for the Photosmart B110 series?

the HP website is mighty confusing and I'm having no joy!
Thanks
Jeff
This question was solved.
View Solution.

Hi there JeffDennis,
Use your device's serial number here to see available parts. If none are available you may have to turn to resellers.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

I need help picking the correct power supply for my HP Pavilion a1000

Hello,
I need to replace my power supply on my HP Pavilion a1000. It currently has the original (A Bestec Model: ATX-300-12Z CDR. The HP P/N is 5188-2625.
I found one on ebay that has the same numbers but instead of CDR, it says DDR. I don't really know what that means. The listing is below. Will this work? If not, could you give me a link that would work?
Thanks ahead of time for your help!!
http://www.ebay.com/itm/Not-Noisy-Replacement-PC-Power-Supply-fo-Bestec-ATX-300-12Z-DDR-HP-P-N-5188-...
This question was solved.
View Solution.

jimmycaps wrote:
Hello,
I need to replace my power supply on my HP Pavilion a1000. It currently has the original (A Bestec Model: ATX-300-12Z CDR. The HP P/N is 5188-2625.
I found one on ebay that has the same numbers but instead of CDR, it says DDR. I don't really know what that means. The listing is below. Will this work? If not, could you give me a link that would work?
Thanks ahead of time for your help!!
http://www.ebay.com/itm/Not-Noisy-Replacement-PC-Power-Supply-fo-Bestec-ATX-300-12Z-DDR-HP-P-N-5188-...
Hi,
Yes the PSU will be ok. It's a desktop so you don't have to use exactly the same PSU. It can be even more powerful but make sure there are all compatible connectors. It looks like the CDR version is only 300W and the DDR 400W. The connectors are the same..
http://www.newpowersupply.com/bestec_atx_300_12z_cdr_300w_300w_24_pin_ps2_replacement_power_supply_p...
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

I need help in activating apple id to for the find my iphone app

i need help in activating apple id to for the find my iphone app

What sort of help are you requesting from us, your fellow users? What exactly is the problem/issue?

Why is the power supply for the Mini so big?e

Can anyone explain why the power supply / adapter for the mac mini is so big compared to the power adapters for the macbook? The processor and hard drive for the mini is the same as those for the macbook, so why is the power brick so much bigger? Just curious.

While I doubt anyone who knows for sure will be prepared to pop up and answer, I suspect the reason is two-fold: firstly that the supply is engineered for constant use, 24/7, where laptop supplies are not, and thus it is larger because the components are more rugged and over-specced, and secondly for lowest cost, since it is cheaper to engineer a larger product of this kind than a smaller one, due to the premium cost of the smallest narrow-tolerance components.

I am trying to find a power supply for the sony DRX-720 DVD/CD AND THE PRICE

I am trying to find a power adapter for the sony DRX-720UL DVD/CD Rewritable Drive and the cost?

All product support for CD/DVD drive, tape backup, or magneto-optical drive peripherals, including repair status, is available from Storage by Sony.
NOTE: Contact and other information can be found on the Storage by Sony Web site at http://www.storagebysony.com/
If my post answers your question, please mark it as "Accept as Solution"
http://bit.ly/Win-4K

Need Help with Oracleasm - a kernel module for the ASM library

I am a beginner, trying to install Oracle RAC. I have a system with SuSE Linx 11 (64 bit) loaded. I need to get the correct ASMLib packages needed for installing ASM. I think I got the following packages that are needed for installing ASM
1) oracleasmlib- the ASM libraries (oracleasmlib-2.0.4-1.SLE11.x86_64.rpm)
2) oracleasm-support- utilities needed to administer ASMLib (oracleasm-support-2.1.3-1.SLE11.x86_64.rpm)
I am unable to find the third package.
3) Oracleasm - a kernel module for the ASM library
I looked at my kernel version it says "2.6.27.19-5-default". I am not sure where I can get the above third package. If you have an answer/know ase share your thoughts.
Thank You

Hi!
Don't use ASMLib, it will be no longer available, it will only came in Oracle Unbreakable Kernel for Linux 6.
The easly way to set the permissions on your devices is with a /etc/init.d script that do the job.
Here is an example:
#! /bin/bash
# chkconfig: 2345 25 19
# description: Set ASM Permissions on to devices at boot.
case "$1" in
start)
/bin/chown oracle:oinstall /dev/sdb1
/bin/chmod 0660 /dev/sdb1
stop)
#do nothing
status)
ls -l /dev/sdb1
echo "Usage: $0 {start|stop|status}"
exit 1
esac
exit o
You need to replace the /dev/sdb1 for your acctual partitions.
Please check the Docs to be sure that you meet all pre-reqs.
http://docs.oracle.com/cd/E11882_01/relnotes.112/e23558/toc.htm
http://docs.oracle.com/cd/E11882_01/install.112/e22489/toc.htm
http://docs.oracle.com/cd/E11882_01/install.112/e24321/toc.htm
Hope it's helps.
Best Regards,
Julio

Is there an available car charger/ power supply for the iPad that works?

Is there an iPad car charger/ power supply available?

There are many of them: http://store.apple.com/us/browse/home/shop_ipad/ipad_accessories/power

I need help, i just synced my iphone3gs for the first time and now most of my apps wont work

I just used itunes for the first time to sync my iphone 3GS!!! Now, half of my apps will not work! Any suggestions? I touch on the app and it flashes real fast then back to my home screen... HELP PLEASE!!!!

Try to reset the phone by holding the sleep and home button for at least 10 sec, until the Apple logo comes back.
If this does not work, restore the phone. Restoring is covered here: http://support.apple.com/kb/HT1414

How to replace the power supply on the HP Pavilion slimline s5212y

Does anyone know where I can find instructions for this.

Hi,
The second manual of the following link may help:
http://h10025.www1.hp.com/ewfrf/wc/manualCategory?cc=us&lc=en&dlc=en&document=&product=4041245
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Need help with Adobe Premiere Elements 9 for the Windows XP PC

Just got it today, so I could make my own video and audio files from pre-existing ones. I first used a version of Adobe Premiere back in school in the '90s, and seemed to easily make them there, while not working on school work. There was a row for inserted video, and a row below that for inserted audio. I'm out of college currently, and just bought Elements 9, as said, but am struggling with it. Could someone please tutor me to get me started? Perhaps even talk over the phone? I'm trying to combine different video and audio tracks into a new singular video/audio file.
Thanks in advance.
>>
Welcome to the forum, but unfortunately, you have posted to the Premiere Pro, CS 4 and Earlier forum.
Instead, you should post to the PrElements Forum, as few here will know anything about PrE 9.
Now, the starting secret of PrE is your Source Files. Can you tell us the full details of those?
Next, matching those to the correct Project Preset, is the next step. Can you tell us what you chose at New Project?
For a list of some of the resources for learning PrE, see this ARTICLE.
Good luck,
Hunt
>>
What are Source Files? You mean the videos I'm using? The main one is here:
http://www.tfarchive.com/cartoons/videoclips/bones.php
Two to four additions to it will be used with video parts from here:
http://www.tfarchive.com/cartoons/videoclips/us_commercials.php
And my first project is a .prel file. Is that what you meant?
Is it possible I could get assistance over the phone?
Thanks.

I created a more precise list of what I wish to combine to make one new video program:
Audio:
http://www.tfarchive.com/cartoons/videoclips/bones.php
Transformers_S2.mpg (0:00 - 0:33) (All)
Video:
http://www.tfarchive.com/cartoons/videoclips/bones.php
Transformers_S2.mpg (0:00 - 0:08)
Fade to
Transformers_S2.mpg (0:31 - 0:33)
Fade to
http://www.tfarchive.com/cartoons/videoclips/us_commercials.php
Rodimus.mpg (0:00- 0:08) (Note: Should start after grey jet passes by on top of screen (less than a second in), and stop after blue robot tramples over the other two robots, cutting off the part where he's shot at from the sky, and all that afterward.)
http://www.youtube.com/watch?v=5yd1OmZvU8w
(1:34 - 1:38) (Note: Should start as soon as video beings, and end when the four side robots are shooting their laser guns, and the one in the middle shoots his shoulder-cannons, cutting off the part with the bridge and missiles, and everything else afterward.)
http://www.tfarchive.com/cartoons/videoclips/us_commercials.php
trypt.mpg (0:15 - 0:16) (Note: Only shows the brief second or two where the five robots quickly transform to one big robot.)
http://www.youtube.com/watch?v=h23kRJ9i058
(5:22 - 5:25) (Note: Should start with all 5 robots appearing onscreen, and end with them, in a combined robot, firing at the screen, cutting off the white laser-shooting base/battle-station and everything else afterward.)
http://www.tfarchive.com/cartoons/videoclips/bones.php
Transformers_S2.mpg (0:23 - 0:33) (Note: Should start with lava-flowing ending, and lined-walkway appears, and goes to the end.)
Not sure if I can get all of these videos in, in the 33 second time limit. I'm willing to cut either the trypt.mpg clip, and/or the youtube link-clip below it.
I have a youtube downloader program, so no worries there. Also need to know how to cut video so I can make these clips that are from youtube and tfarchive.
I also want the video to contain the same quality as shown from each file here, and all fit the size of the largest file (the youtube one, I think it is).
Please LMK how to do this, and if any of this is unclear. Things like this are all I really want to use APE9 for, so I won't be asking much else here.
Thanks.

I need a monitor power supply for HP2711X. Where can I buy one?

I need a monitor power supply for HP2711X. Where can I buy one?
This question was solved.
View Solution.

Because the XP597A3 (actually any of these product numbers; XP597AA, XP597A3, XP597AS) is a HP 2011x 20" LCD/LED widescreen monitor. The OP was looking for an A/C adapter power supply for the HP 2711x 27" LCD/LED widescreen monitor, which is product # XP600AA or XP600A3. The adapter power supply I linked to, is the correct part for the 2711x monitor.... that is why not those other parts.
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Power supply for 3400

Hi, I lost the power supply for my I-Triggue 3400, so I need to know how is the shema of wiring to make a new one. Thanks a lot.

For the DMP-4400G:
Part# is DMP-4400-ACC-KIT=
(Accessory Kit)
For the DMP-4305G:
Part# is DMS-DMP-4300G-KIT
NOTE: The ACCESSORY KIT does come with the Power supply
for the DMP. However, the power cable is a separate
configuration item that needs to be ordered separately.
I hope this helps!
T.

Spare Power Supply for SG300-10P

Hi Guys,
anybody knows where i can buy a spare power supply for the sg300-10p.
Perfectly in Europe or Germany.
thx
Paul

Hi Paul, there has not been an individual part number for the power adapter. This is also true for things like rack mount kits. If your power adapter has died then you would need to call your reseller or the small business support requesting RMA.
-Tom
Please mark answered for helpful posts

Power supply for Nexus gear

I need to migrate devices off of 110v and move them over to 208v. I was wondering if there would be any risk moving one side to 208v while the other is still connected to 110v on the Nexus 7 and 5K switches, or would it be best to take down the device all together then make the change?

For the DMP-4400G:
Part# is DMP-4400-ACC-KIT=
(Accessory Kit)
For the DMP-4305G:
Part# is DMS-DMP-4300G-KIT
NOTE: The ACCESSORY KIT does come with the Power supply
for the DMP. However, the power cable is a separate
configuration item that needs to be ordered separately.
I hope this helps!
T.

I need help to replace my power supply for the hp pavilion elite m9510f

Similar Messages

Maybe you are looking for