I need help to set up my AirPort with AT&T Uverse

I purchased the AirPort to replace the wifi portion of my AT&T Uverse NVG510 modem/router. The AT7T people said to turn off the wifi on the router. BestBuy says it will work. I am not able to see from the instructions on the AirPort how to set that up. Help?

THanks for the answer. I do not know how to enter the bridge mode. I went with the "new network" with the AirPort connected from the Ethernet/wan port to an open port on the Uverse router. It works and I went into the router and shut off it's wifi. Will it still be a good idea to set the airport in the bridge mode? The wifi seems to be a little stonger but I was hoping for a little more range.

Similar Messages

Need help w/ setting up ports to run a server for America's Army

Need help w/ setting up ports to run a server for America's Army. I read wat u need to change the ports but i dont understand wat to put. here is wat the site says
Q: How do I run my own server?
A: Quick and dirty server info:
1. Edit RunServer.bat to change the map.
2. Run RunServer.bat
Or:
server.exe LAN MAPNAME.aao (Host a LAN game)
server.exe global MAPNAME.aao (Host a Public game)
Also: When you create a server setup and want to allow other users to join your server, you need make sure the following ports are open for outgoing and incoming traffic in your firewall: 1716 (UDP), 1717 (UDP), 20025-20045 (TCP), and 20047 (TCP). Failure to open these ports will prevent the server from accepting connections from other players or prevent other players from being able to see your server online.
There are several settings that also need to be defined in your server configuration INI file (in the Windows version, these files are located in “My Documents\America’s Army Server Settings\{settings file name}.ini”).
[Engine.GameEngine]
ServerActors=Andromeda.AndromedaMBS
[Andromeda.Andromeda]
GameServerIp=
Make sure that you set the actual IP address of the America’s Army Server under GameServerIp= (for example, “GameServerIp=000.000.000.000”). The supplied address must be your actual internet IP address, if this is left blank or you supply the IP address for your internal network (such as 192.168.0.x), your server will not be able to accept connections from the internet.
If your server.ini file contains the setting shown below, please change the QueryPort setting to 20025. This setting can also be removed, as the default setting is port 20025.
[Andromeda.AndromedaMBS]
QueryPort=20025
Punkbuster user fix correction.
If [Engine.GameEngine] block has been changed to read as below:
[Engine.GameEngine]
ServerActors=IPDrv.AndromedaMBS
Please add the following block to your INI file:
[IpDrv.AndromedaMBS]
QueryPort=20025
(Last Updated: 2006-04-20)

Your images are not stored in the catalog. They are stored in folders on your computer. If you imported images that were already on your computer using the "Add" Option they are still in that same folder. If you imported images from your camera then they are in the folders that you specified when you imported. The catalog points to those images wherever they are located, and records all of the adjustments that you make to the image. When you send an image to Photoshop for further editing and save that image in Photoshop, it is normally saved back in the same folder as the original image.
Images are not "saved" in Lightroom. The basic default workflow in Lightroom is to store all of the adjustments in the catalog, leaving the original image completely unmodified. The catalog becomes the central controlling mechanism. It is a database that contains pointers to where the images are located and a record of all adjustments made to those images using Lightroom. Properly managed, you only have those original master files and secondary files for the ones that you have sent to Photoshop for further adjustment. When you want to provide a copy for someone else, you use the export dialogue for that purpose. I often export JPEG images to share with others or to post on the web. After I have usedthe JPEG for its intended purpose I delete it.

I need help in setting up a wireless connection

I need help in setting up a wireless connection.
I have a 2005 iMac G5 and currently I am using a Qwest DSL Modem with a Belkin router.
Qwest suggested that I buy a new wireless modem/router. It may be the Motorola 3347 or another wireless modem. I am worried about security when on the internet and have read about changing the SSID password and use the WPA for encryption. All of this is a mystery to me.
Also, I would like to buy from Directv the Linksys wireless adapter to use on my HD-DVR receiver to get their “On Demand Movies.”
My question is, does my iMac G5 have all of the security I need to use a wireless modem, and with the Linksys adapter can I view my photos or DVD’s in iMovie wirelessly to my TV in the living room?
I am concerned about security with a wireless setup, but it seems that all of the new TV’s have the ability to have a wireless connection to the internet.
Any suggestions would help me.
Thanks,
DaisyMay

NETGEAR RangeMax Dual-Band Wireless-N Router with 4 Ethernet Ports
Model: WNDR3400-100NAS | SKU: 1208844
This wireless router enables speeds up to 600 Mbps for efficient operation and features a broadband usage meter that ensures accurate measurement of daily, weekly and monthly Internet traffic.
4 Read reviews (21)
Sale: $79.99

Downloaded Epsom printer app need help to set printer up on iPad 3

Need help to set up Epsom printer to ipad3 downloaded Epsom app can find the printer but don't know where to set up

It's Epson, not epsom. Epsom refers to epsom salt (magnesium sulfate).
... Anyway, iPads don't have printers directly set up. You might interface with a printer over a WiFi. That could be done either using Apple's AirPrint (if the printer is new enough) or maybe you have Epson's iPrint utility.
If you have the iPrint utility, you simply open the utility, click the "maintenance" button in the lower left, and select the "Printer" on the top and set it up there.

Need help to set up my exsisting paypal account

need help to set up my exsisting paypal account

Did you have a look at the document listed here
http://forums.adobe.com/community/formscentral/payments?view=documents
Gen

HT5312 I want to purchase an APP on my ipad. When I enter the answers to the security question, it comes back invalid. The answers are correct. I need help re-setting my answers.

I want to purchase an APP on my ipad. When I enter the answers to the security question, it comes back invalid. The answers are correct. I need help re-setting my answers.

 Account Security Team (AST) 
Check the AppleCare number for your country here:
http://support.apple.com/kb/HE57
Call them up, and let them know you would like to be transferred to the Account Security Team.

Help: FSB Setting for MSI 875P with Intel 3.06 533Mhz & Corsair 512 27

Help: FSB Setting for MSI 875P with Intel 3.06 533Mhz & Corsair 512 2799 333Mhz
Need a little help here, Intel's specs for the P4 3.06GHz 533 is a multiplier of 23 x 133Mhz.
However 133Mhz as a FSB seems very slow.
The 875P NEO has two BIOS settings: CPU Ratio and Adjust CPU Bus
What are your settings for these - I am quite confused?
Thanks!
G.

133 is the stock FSB setting. set your memory to DDR333.
Do you want to overclock? you might want to set your memory to DDR266 which is 1:1. so u can adjust a bit of FSB from 133 to maybe 150.
PS dont forget your memory timing. 2-6-3-3 would be oki i think. what bios version r u using?

Need help Connecting Crystal Reports 8.5 with GBS Agency Expert 6.7.6c

Need help Connecting Crystal Reports 8.5 with GBS Agency Expert 6.7.6c. I need assistance on connecting these together so I can run a report. I am not an IT person so if someone could dumb it down it would be great.
Thanks,
NBGHealth

Hello,
I assume GBS Agency Expert 6.7.6c is some sort of database or data source? If you have an ODBC driver then create or use a System DSN to the database. Then you can create a report using that DSN.
Otherwise I suggest you contact the makers of GBS Agency Expert 6.7.6c and ask them how to connect to the database.
Let them know CR is ANSII 92 ODBC 3 compliant.
Thank you
Don

NEED HELP TO SET UP SMALL NETWORK - WIRELESS SIGNAL FROM NOVATEL U760 USB

Hello -
I need help setting up a small network in my new home in Florida, which has no wired broadband capability - not cable, not dsl. My options are satellite (which I'd like to avoid) or wireless broadband via Millenicom (or now Virgin Mobile) using their Novatel U760 USB stick.
Here are the network components - someone please tell me how to set this up:
PC #1 (has wireless card, but I've connected it by ethernet to the router)
PC #2 (no wireless card; connected via ethernet to router)
MACBOOK, 1 1/2 years old (2.1 GHz Intel Core 2 Duo, 4 gigs RAM), running OS 10.58, connected wirelessly to router.
AIRPORT EXTREME BASE STATION, Model A1143.
I'm not thrilled about using a wireless 3G signal as my primary one, (sprint network, claims 600 - 1400 kbps speed), but it costs 1/2 to 1/3 of what a slightly faster satellite signal would.
I have not ordered this service yet. Before I do, I'd like a clear understanding that I can, in fact, set up my simple network, which I'd probably do the same as it's now configured with cable broadband - both PC's plug via
ethernet into the Airport Extreme router, the MacBook connects wirelessly - AND,
my question is this:
Can I plug the wireless card - a Novatel U760 USB-stick device - straight into that USB slot in the Airport Extreme base station and will it automatically recognize that device?
Or, do I have to plug it into the MacBook and somehow share that wireless signal between the 2 PC's (only 1 of which has a wireless card, so I'd have to get a card for PC #2)?
And help anyone can provide will be much appreciated!
Thanks,
Em

from the Airport FAQ #14:
"Question: Can I connect my Soundsticks or other USB speakers to AirPort Express?
Answer: No. The USB port is for connecting a printer, not for other devices."
Im assuming other devices include USB modems.
So, I would say your cheaper route would be to get a second wireless card and just share your internet connection from one of your PC.

Need help to set up file and print sharing

i just bought my router and i needed help setting up file and print sharing i am using windows xp on both of the computers one is a desktop and the other one is a laptop

Here
Enabling File and Printer Sharing
"Sometimes your knight in shining armor is just a retard in tin foil.."-ARCHANGEL_06

HT1695 i need help in setting up my new Iphone....please!!

i need total help in setting up my new iphone....from the jump!!! Please help

This might help you http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

NEED HELP PLEASE Setting up 2 VLANS and a redundant WAN connection

I have a remote branch office which is actually a huge bar/lounge. The bar wants to enable patrons to access the Internet with their wireless laptops. I want to prevent those patrons from accessing our private network, and also prevent them from traversing our static VPN tunnel back to HQ.
The bar processes all credit cards via the T1 connection, and this has caused us to lose money every time the T1 goes down while we're open, since there is no WAN redundancy right now.
Here is my current hardware configuration:
1) one PIX 501 50-user 3des.
2.) two Dell 3024
3.) one Aironet 1100(g) AP.
Current LAN Network: 10.35.35.0
(internal employees only, static VPN tunneled to remote HQ network)
Current Wireless SSID's:
SSID1=PRIVATESSID
SSID2=PUBLICSSID (not currently in use, waiting to figure this out)
Current WAN: one T1 connection.
WHAT I WOULD LIKE TO DO AND NEED HELP FIGURING OUT:
#1a) I want to create two separate VLAN's that are able to share the WAN connection, but not be able to "see" each other.
#1b) These VLAN's would be mapped to their respective SSID's on the AP (PRIVATESSID>10.35.35.0 and PUBLICSSID>192.168.1.0).
#1c) The 192.168.1.0 network should not be able to traverse the static tunnel between the branch site and HQ.
#2) I would like to install a backup WAN connection such as a modem 56k dial-up to an ISP or a cable modem to an ISP. In case the primary T1 goes down, I would like the router to automatically dial out over the modem conection and route all Internet bound traffic over that backup WAN connection, until the primary comes back online.
Question 1:
I'm assuming I need a router to do the intervlan routing. Could this router also do the on-demand WAN backup dialing to an ISP via analog modem?
What IOS version and flavor (IP base, IP+, etc.) would I need? What is the cheapest router I can do all that with (i.e. 2620/2621/1720/3600 series)? What WIC's or NM's would I need?
Question Two:
I would like to prioritize PRIVATESSID's traffic over PUBLICSSID's traffic, which I know I can do on the access point. Can I do this on the router so that any 10.35.35.0 traffic takes priority over any 192.168.1.0 traffic?
Question Three
If the primary T1 WAN connection goes down, I don't want the router to re-route the 192.168.1.0 traffic over the backup 56k dial-up WAN connection. That traffic can wait until the T1 comes back up.
Any help you can provide would be very much appreciated.

Assuming your access points can place SSID into separate vlans and support 802.1q trunks then I can attempt to answer your questions. There are seperate secuity issues with both SSID for protection and VLANs for seperation but in your case in may be minimal.
q1
Any cisco router that will run 802.1q trunking will work. Since you are looking at older routers you will need IP+ to get it. Even 2610's will support 802.1q on their 10m ethernet at the correct code level but 10m and 802.1q is sorta nonstandard. Since your backup is only 56k you can use the internal modem port as a dial backup. A wic-2a/s will also work if you prefer not to use the modem port. You will need some wic to run your t1 line. If you are planning to leave the t1 on another router it makes the next 2 questions much harder.
q2
This is fairly simple and depends on your ios level. "priority queing" is supported on even the older software. I assume you do not control the far end of the t1 line since it sounds as if this goes to a ISP.
You will need to have them do the QoS since most issues with the internet are inbound and not outbound. You can only control outbound traffic.
q3
If the T1 is on the same router then this is fairly simple. You can just put a floating static default route in that will cause the dialer to come up if the the t1 goes down. There is no easy way to protect against the line being up but no traffic passing. This is also why it would be best to have the t1 on the same router. If its not you will need to get very creative to solve this. You could build a GRE tunnel to a remote location and montior the tunnel or run a routing protcol over the tunnel. In the newest software you could use SAA and policy routing to force the traffic over the dialer but the router must support ios 12.4.
3a. You mentioned a cable modem as a backup. That can be much easier sometimes since it is all routing and no dialer interfaces with nasty modem issues. This does not make the issue of the t1 not on the same router easier.

I need help regarding setting my mail accounts on macbook pro

I need help regarding resetting my mail accounts on macbook pro

What kind of accounts do you need to reset? IMAP or POP accounts using one of the many web-based messaging systems? An Exchange server account? Were they working and now just not working any longer?
You're going to have to be a little more specific in what you need...
Clinton

Already have wireless network, need help for set up of time capsule for wired backup only.

Hello all -
I have a time capsule that plugs into wall and used a wireless network to back up computer. It would always mess up internet afterwards so I would unplug the time capsule and reset internet until the next back up. my time capsule now will not link into my computer. It just flashes amber. Spoke with apple and was told to come on here and ask for help for setting up time capsule for a wired backup only and to mention that I have a wireless network.
Hope any of this makes sense.
Thank You!!

Spoke with apple and was told to come on here and ask for help
Really? The paid professionals at Apple told you to post on a forum where users.....just like you....are trying to answer questions? We'll try to help, though.
For starters, please tell us the make and model of the modem/router that you have now that is providing your wireless network.

Need help in setting up Eudora

I keep having problems with the postage stamp .mac mail and would like to try Eudora but I cannot seem to set it up correctly.
Can anyone help me set it up?

Eudora 6.2.4 is working fine for me on Leopard. Having tried all the possibile alternatives, I find Eudora the most advanced of all email apps. And reliable. It simply doesn't do any of the bad things that Apple Mail does which I see being discussed in these forums.
Admittedly, Eudora's settings can be a bit arcane, but once you have the application set up, using it is a breeze. The starting point is to go to Special--> settings-->Personalities--->and enter the data there. Personally I always get confused about what is the mail server, what is the SMTP server, what user name to enter etc. but by playing around with these things you can quickly get Eudora to do the basic send/receive thing.
Then you have all the other options.
Some people think that because Eudora has been around for years, it is "old" and that anything "old" is not as good as something "new". Then they come here asking for help with the "new" thing (Apple Mail).
Expect them to make gratuitous remarks now, about me.

I need help to set up my AirPort with AT&T Uverse

Similar Messages

Maybe you are looking for