I need help! urgent !!! MAIL CLIENT
I need "simple" mail client in made Jbuilder for my school. Please help me. I have no idea how to do it. I need source etc. Please help me. It's very urgent. Thanx very much.
Thx U. But I need sometnihg more... My english isn't
perfect, maybe this is the reason why u didn't
anderstand me. Here's how I interpreted what you said. Please point out where I misinterpreted:
"This has been assigned to me. It is my responsibility. I am supposed to do it so I can learn. But I don't care about learning. All I care about is the number or letter that signifies the quality of the work turned in. I do not wish that number or letter to accurately reflect what I have learned in this class, because I've learned nothing, or else I have learned something, but am too lazy to demonstrate that.
"Therefore, I'm requesting that somebody else do my work for me, so that I can take credit for their work, and receive a value that I did not deserve.
"I have no respsect for my insructor, my classmates, or the people I'm asking for help. All that matters is my own selfish, short-sighted, misguided objective."
Similar Messages
-
Username and password- Need help urgently!
Hi
1) First of all, i have received an email stating that my account under Removed personal information to comply withCommunity GuidelinesandTerms and Conditions of Use.
is being banned as there is multiple obsence post. I need to clarify that i have never used my account to post in BBM forum before. Even if i did, is when i need help urgently for my BBM application. Currently i am holding 4 bbms now. Have never came across this issue. Pls check and advise
2) I urgently need to setup my email accounts. But this time round, when i logged in, they required for my email id and password. And yes my email id is Removed personal information to comply withCommunity GuidelinesandTerms and Conditions of Use. all the while for the past 4 years. I am unable to log in. I tried all kinds of password but unable to log into my mobile settings
Verfiy Blackberry ID
This application requires u to verify ur blackberry id to continue.
blackberry ID username:
Removed personal information to comply withCommunity GuidelinesandTerms and Conditions of Use.
password:
I went to the forget password option, unfortunately as i have never retrieved my password before, i am unable to remember the security question as i did not use it for the past 4 years.
Pls advise.
Urgent and thanksHi,
I have been trying this technique for the past 4 days. It doesnt work no matter how i change the password at the link that u gave me. Even though it's being reset accordingly, i am still unable to log in the password at my mobile. i am 100% sure that i have entered the correct password at my mobile. ( verify blackberry id) . I want to setup new email accounts under "setup" . Upon me clicking " email accounts", it prompt for the one key password. I have never faced this issue before. I am very very sure that my password is correct. Pls advise as i need to add email accounts. Other programs are working fine without any password required being prompt. ie. blackberry world
This is very very urgent to be resolved. Pls help. -
Need help urgently with OS X and Windows 7
I need help urgently.
I installed Windows 7 on my macbook pro with OS X Lion. After installing Windows7, I accidently converted the basic volumes to dynamic volumes and now i can't even boot to OS X.
Please help me how to recover my OS X Lion. If I have to delete Windows and bootcamp partitions, it is OK.
I just want to get back my OS X bootable.
Thanksthihaoo wrote:
Sorry
I can't even see the OS X partition when I hold down the "Option" key.
I could see OS X and Windows partitions if I hold down Option key before changing the partitions to Dynamic partitions from Basic in Windows 7.
Now can't see OS X partiton and only see Winodws partition but when I tried to boot onto Windows7 , I got BSOD and macbook pro restart.
Please help
The usual reason for the OSX partition to be invisible under these circumstances is that it has been trashed by Windows.
Do you have a backup? -
Need help urgently, I upgraded my iPhone 4 with new OS 5, but at the last restore failed. Apple Customer Care helped me to resynch my phone with all that available in Library. I've got all back except my Contact no. Pls help guys, thnx Plz guys anyone can help plzz....I've lost all contact and I dont even have any secondary back up also...!!!
If you've had it for less than a year, then it's still under warranty. Take it to an Apple store or an authorized service facility. See http://support.apple.com/kb/HT1434
-
I desperately need help with Mail, specifically sending
For Starters: I am on OSX 10.9.2 and am trying to use mail 7.2.
https://discussions.apple.com/post!input.jspa?container=2998&containerType=14&qu estion=I+desperately+need+help+with+Mail%2C+specifically+sending
I cannot send. I have been at this for hours and hours and hours. Here are the details.
my mail server however is s1.sistercompany.net
I can receive email just fine. I can also send mail just find having set this up on my iphone and also in thunderbird (which i hate hate hate hate hate hate hate, which is why I am desperate to set up mail)
The settings in thunderbird are as follows:
Servername: s1.sistercompany.net
port: 465
Authentication method: normal password
Connection Security: SSL/TLS
However, I just can't get this to work in Mail. When I write an email and hit send I get a popup that says:
Cannot send message using the server s1.sistercompany.net
The certifcate for this server is invalid.
Now, my tech guy says yeah the certifacte is invalid because you are going through sistercompany server, there should be some way to just accept the certifcate anyway (but he has never used mail before).
So I have serached around and come up with this: http://support.apple.com/kb/PH11706
Which tells me to use the verify certificate dialogue, which I would do except there is no verify certificate dialog. Any thoughts?
<Email Edited by Host>I don't have a problem watching the Lost episode on abc.com, using a stock MacBook with 512MB RAM. I don't know what technology abc.com uses in their viewer, but I have Flip4Mac and the latest version of Flash player installed.
-
need help urgent, my iphone is stuck at connect to itunes screen, when i restore it using itunes, it shows error -1...may someone help me plz....
See:
iOS: Unable to Update or Restore
http://support.apple.com/kb/ht1808 -
BB Curve 8900 need help urgently!!!!!
hey my blackberry 8900 rebooted but now it says "Reload Software:552" and no matter what buttons I press it just won't work, please tel me what to do I really need help urgently!!
Solved!
Go to Solution.Before you do anything else: Do a simple reboot on the BlackBerry in this manner: With the BlackBerry device POWERED ON, remove the battery for a minute, and then reinsert the battery to reboot. A reboot in this manner is prescribed for most glitches and operating system errors, and you will lose no data on the device doing this.
Please let us know if that reboots the device properly or not.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
I tried to buy the WhatsApp app. The card has been charged. but the app wasnt downloaded.i need help Urgently.
Downloading past purchases from the App Store, iBookstore, and iTunes Store
To see which iOS version is installed, tap Settings > General > About -
HI need help on mail Mac OS X leopard- can't send or receive anymore have tried checking Bal etc -everything seems ok- there is just a weird icon next to in box a sort of bell which I believe means no mail setup but I'm stuck any suggestions are welcome thank you regards
Most of the time I'd suspect one of 2 other things...
orange.fr has changed their authentication without telling their users.
Malformed eMails clogging up both ways.
So anyway, did Connection Doctor say it connected or not? What was exact error if there were some?
Can you login to their Webmail in a Btowser?
http://messagerie.orange.fr/mail.html -
Sound trouble need help urgent please
Could somebody tell me how i can fix my problem.
problem: when my curve 8520 is in silence profile en i start typing in a phnoe number i hear nothing,
but when my phone is in normal profile i hear i beep with every number of the phone number i enter.
so i want to know how i can stop my bb from making this noiseMy friend it is a fillable form, can i email you the pdf that iam trying to fill out? then would you be able to tell me how to do it please mate?
I have attached the form, i need to fill in those boxes so that everything is accuratly height + spacing is correct, and to do it fast, thats all im after.
Date: Sun, 27 Jun 2010 18:31:58 -0600
From: [email protected]
To: [email protected]
Subject: Need Help Urgent Please
If is a fillable form, just tab to the next field. What we do not understand from you is IF it is a fillable form or not. If it is not, then the 3 options I gave can be used. Placing text is always a problem. You might find it useful to turn on the grid to help in placing your typewriter fields. However, if it is fillable you do not have to create any fields to type in, you just leave the tool as the hand tool and select the predefined fields with the cursor or the tab key and type accordingly. If the field is a checkbox, then you just use the space key to activate it.
So, are we talking about a fillable form or something that has the appearance of a form, but not fields to fill in. This is what Bernd has been try to find out and you keep suggesting it is fillable as we read what you have said.
> -
Need urgent help in configuring Client to Site IPSec VPN with Hairpinning on Cisco ASA5510 - 8.2(1).
The following is the Layout:
There are two Leased Lines for Internet access - 1.1.1.1 & 2.2.2.2, the latter being the Standard Default route, the former one is for backup.
I have been able to configure Client to Site IPSec VPN
1) With access from Outside to only the Internal Network (172.16.0.0/24) behind the asa
2) With Split tunnel with simultaneous assess to internal LAN and Outside Internet.
But I have not been able to make tradiotional Hairpinng model work in this scenario.
I followed every possible sugestions made in this regard in many Discussion Topics but still no luck. Can someone please help me out here???
Following is the Running-Conf with Normal Client to Site IPSec VPN configured with No internat Access:
LIMITATION: Can't Boot into any other ios image for some unavoidable reason, must use 8.2(1)
running-conf --- Working normal Client to Site VPN without internet access/split tunnel
ASA Version 8.2(1)
hostname ciscoasa
domain-name cisco.campus.com
enable password xxxxxxxxxxxxxx encrypted
passwd xxxxxxxxxxxxxx encrypted
names
interface GigabitEthernet0/0
nameif internet1-outside
security-level 0
ip address 1.1.1.1 255.255.255.240
interface GigabitEthernet0/1
nameif internet2-outside
security-level 0
ip address 2.2.2.2 255.255.255.224
interface GigabitEthernet0/2
nameif dmz-interface
security-level 0
ip address 10.0.1.1 255.255.255.0
interface GigabitEthernet0/3
nameif campus-lan
security-level 0
ip address 172.16.0.1 255.255.0.0
interface Management0/0
nameif CSC-MGMT
security-level 100
ip address 10.0.0.4 255.255.255.0
boot system disk0:/asa821-k8.bin
boot system disk0:/asa843-k8.bin
ftp mode passive
dns server-group DefaultDNS
domain-name cisco.campus.com
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
object-group network cmps-lan
object-group network csc-ip
object-group network www-inside
object-group network www-outside
object-group service tcp-80
object-group service udp-53
object-group service https
object-group service pop3
object-group service smtp
object-group service tcp80
object-group service http-s
object-group service pop3-110
object-group service smtp25
object-group service udp53
object-group service ssh
object-group service tcp-port
object-group service udp-port
object-group service ftp
object-group service ftp-data
object-group network csc1-ip
object-group service all-tcp-udp
access-list INTERNET1-IN extended permit ip host 1.2.2.2 host 2.2.2.3
access-list CSC-OUT extended permit ip host 10.0.0.5 any
access-list CAMPUS-LAN extended permit tcp 172.16.0.0 255.255.0.0 any eq www
access-list CAMPUS-LAN extended permit tcp 172.16.0.0 255.255.0.0 any eq https
access-list CAMPUS-LAN extended permit tcp 172.16.0.0 255.255.0.0 any eq ssh
access-list CAMPUS-LAN extended permit tcp 172.16.0.0 255.255.0.0 any eq ftp
access-list CAMPUS-LAN extended permit udp 172.16.0.0 255.255.0.0 any eq domain
access-list CAMPUS-LAN extended permit tcp 172.16.0.0 255.255.0.0 any eq smtp
access-list CAMPUS-LAN extended permit tcp 172.16.0.0 255.255.0.0 any eq pop3
access-list CAMPUS-LAN extended permit ip any any
access-list csc-acl remark scan web and mail traffic
access-list csc-acl extended permit tcp any any eq smtp
access-list csc-acl extended permit tcp any any eq pop3
access-list csc-acl remark scan web and mail traffic
access-list INTERNET2-IN extended permit tcp any host 1.1.1.2 eq 993
access-list INTERNET2-IN extended permit tcp any host 1.1.1.2 eq imap4
access-list INTERNET2-IN extended permit tcp any host 1.1.1.2 eq 465
access-list INTERNET2-IN extended permit tcp any host 1.1.1.2 eq www
access-list INTERNET2-IN extended permit tcp any host 1.1.1.2 eq https
access-list INTERNET2-IN extended permit tcp any host 1.1.1.2 eq smtp
access-list INTERNET2-IN extended permit tcp any host 1.1.1.2 eq pop3
access-list INTERNET2-IN extended permit ip any host 1.1.1.2
access-list nonat extended permit ip 172.16.0.0 255.255.0.0 172.16.0.0 255.255.0.0
access-list DNS-inspect extended permit tcp any any eq domain
access-list DNS-inspect extended permit udp any any eq domain
access-list capin extended permit ip host 172.16.1.234 any
access-list capin extended permit ip host 172.16.1.52 any
access-list capin extended permit ip any host 172.16.1.52
access-list capin extended permit ip host 172.16.0.82 host 172.16.0.61
access-list capin extended permit ip host 172.16.0.61 host 172.16.0.82
access-list capout extended permit ip host 2.2.2.2 any
access-list capout extended permit ip any host 2.2.2.2
access-list campus-lan_nat0_outbound extended permit ip 172.16.0.0 255.255.0.0 192.168.150.0 255.255.255.0
pager lines 24
logging enable
logging buffered debugging
logging asdm informational
mtu internet1-outside 1500
mtu internet2-outside 1500
mtu dmz-interface 1500
mtu campus-lan 1500
mtu CSC-MGMT 1500
ip local pool vpnpool1 192.168.150.2-192.168.150.250 mask 255.255.255.0
ip verify reverse-path interface internet2-outside
ip verify reverse-path interface dmz-interface
ip verify reverse-path interface campus-lan
ip verify reverse-path interface CSC-MGMT
no failover
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-621.bin
no asdm history enable
arp timeout 14400
global (internet1-outside) 1 interface
global (internet2-outside) 1 interface
nat (campus-lan) 0 access-list campus-lan_nat0_outbound
nat (campus-lan) 1 0.0.0.0 0.0.0.0
nat (CSC-MGMT) 1 10.0.0.5 255.255.255.255
static (CSC-MGMT,internet2-outside) 2.2.2.3 10.0.0.5 netmask 255.255.255.255
access-group INTERNET2-IN in interface internet1-outside
access-group INTERNET1-IN in interface internet2-outside
access-group CAMPUS-LAN in interface campus-lan
access-group CSC-OUT in interface CSC-MGMT
route internet2-outside 0.0.0.0 0.0.0.0 2.2.2.5 1
route internet1-outside 0.0.0.0 0.0.0.0 1.1.1.5 2
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
aaa authentication ssh console LOCAL
aaa authentication enable console LOCAL
http server enable
http 10.0.0.2 255.255.255.255 CSC-MGMT
http 10.0.0.8 255.255.255.255 CSC-MGMT
http 1.2.2.2 255.255.255.255 internet2-outside
http 1.2.2.2 255.255.255.255 internet1-outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs group5
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map internet2-outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map internet2-outside_map interface internet2-outside
crypto ca trustpoint _SmartCallHome_ServerCA
crl configure
crypto ca certificate chain _SmartCallHome_ServerCA
certificate ca xyzxyzxyzyxzxyzxyzxyzxxyzyxzyxzy
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as
quit
crypto isakmp enable internet2-outside
crypto isakmp policy 10
authentication pre-share
encryption aes
hash md5
group 2
lifetime 86400
telnet 10.0.0.2 255.255.255.255 CSC-MGMT
telnet 10.0.0.8 255.255.255.255 CSC-MGMT
telnet timeout 5
ssh 1.2.3.3 255.255.255.240 internet1-outside
ssh 1.2.2.2 255.255.255.255 internet1-outside
ssh 1.2.2.2 255.255.255.255 internet2-outside
ssh timeout 5
console timeout 0
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
group-policy VPN_TG_1 internal
group-policy VPN_TG_1 attributes
vpn-tunnel-protocol IPSec
username ssochelpdesk password xxxxxxxxxxxxxx encrypted privilege 15
username administrator password xxxxxxxxxxxxxx encrypted privilege 15
username vpnuser1 password xxxxxxxxxxxxxx encrypted privilege 0
username vpnuser1 attributes
vpn-group-policy VPN_TG_1
tunnel-group VPN_TG_1 type remote-access
tunnel-group VPN_TG_1 general-attributes
address-pool vpnpool1
default-group-policy VPN_TG_1
tunnel-group VPN_TG_1 ipsec-attributes
pre-shared-key *
class-map cmap-DNS
match access-list DNS-inspect
class-map csc-class
match access-list csc-acl
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class csc-class
csc fail-open
class cmap-DNS
inspect dns preset_dns_map
service-policy global_policy global
prompt hostname context
Cryptochecksum: y0y0y0y0y0y0y0y0y0y0y0y0y0y
: end
Neither Adding dynamic NAT for 192.168.150.0/24 on outside interface works, nor does the sysopt connection permit-vpn works
Please tell what needs to be done here, to hairpin all the traffic to internet comming from VPN Clients.
That is I need clients conected via VPN tunnel, when connected to internet, should have their IP's NAT'ted against the internet2-outside interface address 2.2.2.2, as it happens for the Campus Clients (172.16.0.0/16)
I'm not much conversant with everything involved in here, therefore please be elaborative in your replies. Please let me know if you need any more information regarding this setup to answer my query.
Thanks & Regards
maxsHi Jouni,
Thanks again for your help, got it working. Actually the problem was ASA needed some time after configuring to work properly ( ?????? ). I configured and tested several times within a short period, during the day and was not working initially, GUI packet tracer was showing some problems (IPSEC Spoof detected) and also there was this left out dns. Its working fine now.
But my problem is not solved fully here.
Does hairpinning model allow access to the campus LAN behind ASA also?. Coz the setup is working now as i needed, and I can access Internet with the NAT'ed ip address (outside-interface). So far so good. But now I cannot access the Campus LAN behind the asa.
Here the packet tracer output for the traffic:
packet-tracer output
asa# packet-tracer input internet2-outside tcp 192.168.150.1 56482 172.16.1.249 22
Phase: 1
Type: ACCESS-LIST
Subtype:
Result: ALLOW
Config:
Implicit Rule
Additional Information:
MAC Access list
Phase: 2
Type: FLOW-LOOKUP
Subtype:
Result: ALLOW
Config:
Additional Information:
Found no matching flow, creating a new flow
Phase: 3
Type: ROUTE-LOOKUP
Subtype: input
Result: ALLOW
Config:
Additional Information:
in 172.16.0.0 255.255.0.0 campus-lan
Phase: 4
Type: ROUTE-LOOKUP
Subtype: input
Result: ALLOW
Config:
Additional Information:
in 192.168.150.1 255.255.255.255 internet2-outside
Phase: 5
Type: ACCESS-LIST
Subtype: log
Result: ALLOW
Config:
access-group internnet1-in in interface internet2-outside
access-list internnet1-in extended permit ip 192.168.150.0 255.255.255.0 any
Additional Information:
Phase: 6
Type: IP-OPTIONS
Subtype:
Result: ALLOW
Config:
Additional Information:
Phase: 7
Type: CP-PUNT
Subtype:
Result: ALLOW
Config:
Additional Information:
Phase: 8
Type: VPN
Subtype: ipsec-tunnel-flow
Result: ALLOW
Config:
Additional Information:
Phase: 9
Type: NAT-EXEMPT
Subtype: rpf-check
Result: ALLOW
Config:
Additional Information:
Phase: 10
Type: NAT
Subtype:
Result: DROP
Config:
nat (internet2-outside) 1 192.168.150.0 255.255.255.0
match ip internet2-outside 192.168.150.0 255.255.255.0 campus-lan any
dynamic translation to pool 1 (No matching global)
translate_hits = 14, untranslate_hits = 0
Additional Information:
Result:
input-interface: internet2-outside
input-status: up
input-line-status: up
output-interface: internet2-outside
output-status: up
output-line-status: up
Action: drop
Drop-reason: (acl-drop) Flow is denied by configured rule
The problem here as you can see is the Rule for dynamic nat that I added to make hairpin work at first place
dynamic nat
asa(config)#nat (internet2-outside) 1 192.168.150.0 255.255.255.0
Is it possible to access both
1)LAN behind ASA
2)INTERNET via HAIRPINNING
simultaneously via a single tunnel-group?
If it can be done, how do I do it. What changes do I need to make here to get simultaneous access to my LAN also?
Thanks & Regards
Abhijit -
Hi,
I am facing this problem, Please help me, I am attaching the source files
also along with the mail. This is a small CMP EJB application, I am using
IAS SP2 on NT server with Oracle 8. I highly appreciate if someone can send
me the working copy of the same. I need these urgent. I am porting all my
beans from bea weblogic to Iplanet. Please help me dudes.
Err.........
[06/Sep/2001 13:41:29:7] error: EBFP-marshal_internal: internal exception
caught
in kcp skeleton, exception = java.lang.NoSuchMethodError
[06/Sep/2001 13:41:29:7] error: Exception Stack Trace:
java.lang.NoSuchMethodError
at
com.se.sales.customer.ejb_kcp_skel_CompanyHome.create__com_se_sales_c
ustomer_Company__java_lang_Integer__indir_wstr__215617959(ejb_kcp_skel_Compa
nyHo
me.java:205)
at com.kivasoft.ebfp.FPRequest.invokenative(Native Method)
at com.kivasoft.ebfp.FPRequest.invoke(Unknown Source)
at
com.se.sales.customer.ejb_kcp_stub_CompanyHome.create(ejb_kcp_stub_Co
mpanyHome.java:297)
at
com.se.sales.customer.ejb_stub_CompanyHome.create(ejb_stub_CompanyHom
e.java:89)
at
com.se.sales.customer.CompanyServlet.doGet(CompanyServlet.java:35)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:865)
at
com.netscape.server.servlet.servletrunner.ServletInfo.service(Unknown
Source)
at
com.netscape.server.servlet.servletrunner.ServletRunner.execute(Unkno
wn Source)
at com.kivasoft.applogic.AppLogic.execute(Unknown Source)
at com.kivasoft.applogic.AppLogic.execute(Unknown Source)
at com.kivasoft.thread.ThreadBasic.run(Native Method)
at java.lang.Thread.run(Thread.java:479)
Caught an exception.
java.rmi.RemoteException: SystemException: exid=UNKNOWN
at com.kivasoft.eb.EBExceptionUtility.idToSystem(Unknown Source)
at com.kivasoft.ebfp.FPUtility.replyToException(Unknown Source)
at
com.se.sales.customer.ejb_kcp_stub_CompanyHome.create(ejb_kcp_stub_Co
mpanyHome.java:324)
at
com.se.sales.customer.ejb_stub_CompanyHome.create(ejb_stub_CompanyHom
e.java:89)
at
com.se.sales.customer.CompanyServlet.doGet(CompanyServlet.java:35)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:865)
at
com.netscape.server.servlet.servletrunner.ServletInfo.service(Unknown
Source)
at
com.netscape.server.servlet.servletrunner.ServletRunner.execute(Unkno
wn Source)
at com.kivasoft.applogic.AppLogic.execute(Unknown Source)
at com.kivasoft.applogic.AppLogic.execute(Unknown Source)
at com.kivasoft.thread.ThreadBasic.run(Native Method)
at java.lang.Thread.run(Thread.java:479)
Thanks in advance
Shravan
[Attachment iplanet_app.jar, see below]
[Attachment iplanet_src.jar, see below]One reason that I sometimes get 'NoSuchMethodError' is when I make a change to a
java class that is imported into another java class. When I go to run the
importing class, it will throw a 'NoSuchMethodError' on any methods that I've
changed in the imported class. The solution is to recompile the importing class
with the changed classes in the classpath.
shravan wrote:
Hi,
I am facing this problem, Please help me, I am attaching the source files
also along with the mail. This is a small CMP EJB application, I am using
IAS SP2 on NT server with Oracle 8. I highly appreciate if someone can send
me the working copy of the same. I need these urgent. I am porting all my
beans from bea weblogic to Iplanet. Please help me dudes.
Err.........
[06/Sep/2001 13:41:29:7] error: EBFP-marshal_internal: internal exception
caught
in kcp skeleton, exception = java.lang.NoSuchMethodError
[06/Sep/2001 13:41:29:7] error: Exception Stack Trace:
java.lang.NoSuchMethodError
at
com.se.sales.customer.ejb_kcp_skel_CompanyHome.create__com_se_sales_c
ustomer_Company__java_lang_Integer__indir_wstr__215617959(ejb_kcp_skel_Compa
nyHo
me.java:205)
at com.kivasoft.ebfp.FPRequest.invokenative(Native Method)
at com.kivasoft.ebfp.FPRequest.invoke(Unknown Source)
at
com.se.sales.customer.ejb_kcp_stub_CompanyHome.create(ejb_kcp_stub_Co
mpanyHome.java:297)
at
com.se.sales.customer.ejb_stub_CompanyHome.create(ejb_stub_CompanyHom
e.java:89)
at
com.se.sales.customer.CompanyServlet.doGet(CompanyServlet.java:35)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:865)
at
com.netscape.server.servlet.servletrunner.ServletInfo.service(Unknown
Source)
at
com.netscape.server.servlet.servletrunner.ServletRunner.execute(Unkno
wn Source)
at com.kivasoft.applogic.AppLogic.execute(Unknown Source)
at com.kivasoft.applogic.AppLogic.execute(Unknown Source)
at com.kivasoft.thread.ThreadBasic.run(Native Method)
at java.lang.Thread.run(Thread.java:479)
Caught an exception.
java.rmi.RemoteException: SystemException: exid=UNKNOWN
at com.kivasoft.eb.EBExceptionUtility.idToSystem(Unknown Source)
at com.kivasoft.ebfp.FPUtility.replyToException(Unknown Source)
at
com.se.sales.customer.ejb_kcp_stub_CompanyHome.create(ejb_kcp_stub_Co
mpanyHome.java:324)
at
com.se.sales.customer.ejb_stub_CompanyHome.create(ejb_stub_CompanyHom
e.java:89)
at
com.se.sales.customer.CompanyServlet.doGet(CompanyServlet.java:35)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:865)
at
com.netscape.server.servlet.servletrunner.ServletInfo.service(Unknown
Source)
at
com.netscape.server.servlet.servletrunner.ServletRunner.execute(Unkno
wn Source)
at com.kivasoft.applogic.AppLogic.execute(Unknown Source)
at com.kivasoft.applogic.AppLogic.execute(Unknown Source)
at com.kivasoft.thread.ThreadBasic.run(Native Method)
at java.lang.Thread.run(Thread.java:479)
Thanks in advance
Shravan
Name: iplanet_app.jar
iplanet_app.jar Type: Java Archive (application/java-archive)
Encoding: x-uuencode
Name: iplanet_src.jar
iplanet_src.jar Type: Java Archive (application/java-archive)
Encoding: x-uuencode -
hi i´m a student particularly im new in databes so oracle and i thought that begin with Oracle Database XE Client is a good idea in order to learn and introduce oracle to my self.
i have installed Oracle Database XE Client on WinXp home when installing it just showed me "transactoin server" port 2030 ; well my problem is next according to installation guide 2.4.1 Configuring for Microsoft Internet Explorer
To configure Microsoft Internet Explorer to connect to the Oracle Database XE
Database Home Page:
1. From the Start menu, select Control Panel, then Internet Options.
2. In the Internet Options dialog box, click the Security tab.
3. Under Security, select Local Intranet and then select Sites.
4. In the Local Intranet dialog box, select Advanced.
5. Under Add this Web site to the zone, enter the following site:
127.0.0.1 i did it.
Now i have read about installation for XE client and i should see Database Home Page. but i can´t . some one to help?The client software is only used to connect to a database server installed on a remote machine. It sounds like you need to download and install the server software, which has the actual database. Note that if you install the database on a machine, you don't need the client software on that machine, so you may want to de-install the client software before you install the database server software.
-
suddenly my phone cannot open on the screen it just show usb and itunes logo only... needed help and solutions urgently thanks a lot
Error 1603
Follow the steps listed below for Error 1604. Also, discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.If you do not want to remove the IPSW in the original user, try restoring in a new administrator user. If the issue remains, Eliminate third-party security software conflicts.
Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection. -
Dead bb curve 8520 SOS need help urgently
hi guys
I am experiencing several major issues
1) my phone had been resetting itself a lot lately without reason and randomly. I then downgraded the OS from 5 to 4 then it continued to do the same so I did the removal of the vendor.xml file in the folder of my win 64 bit computer then the blackberry desktop manager, the BBSAK and the computer cannot find my phone. All it does is flash the LED several times in red and wont even restart or show some evidence of life. I have tried everything please help urgently!!!!!Hi and Welcome to the Community!
Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain connected to a known-good wall charger (not PC USB):
With the battery inside, connect your BB to the wall charger
Leave it alone for 2 hours, no matter what the LED or the display does
Remove the battery
Wait 15 minutes
Insert the battery
Wait another 2 hours, no matter what the LED or the display does
This has been known to "kick start" some BBs.
It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
Obtain a known good and already fully charged additional battery...use it in your BB and see what happens
Obtain access to a known good and identical BB...use your battery in it and see what happens
The results of this will indicate if it's your BB or your battery that has the problem.
Otherwise, please try this drastic method:
KB27956 How to recover a BlackBerry smartphone from any state
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
I recently erased my HD and reinstalled Yosemite. I wanted to manually move my saved emails over so I researched and it said to go to library/Mail/V2 and copy everything in there from the old system and paste it into the new system. I did this but got this message...
I don't know what this means. I should have gone online and asked, but tried to fix it myself. I thought if I deleted the gmail accounts and re-entered them it would fix it. When I opened Mail preferences, choose one of the two accounts and hit the "-" button, it gave me a message saying they couldn't be deleted and to do it from the system preferences, so I did that. Now Internet accounts in system preferences shows them as gone, but they are still in the Mail.app. I tried deleting them again from Mail preferences and it won't let me. I then tried to go re-add them to the system preferences and it will add a google account but says there is an error. I am fearful that I have really screwed my computer up. Please help! How do I add them back to my system preferences without errors and what do I do about the above pic of the message that keeps popping up in Mail? How can I delete the gmail accounts if I need to if Mail won't let me. I also haven't gotten a single new email in any of my accounts, including my iCloud and comcast ones since I did this all. What should I do?Back up all data.
Unlock the Network preference pane, if necessary, by clicking the lock icon in the lower left corner and entering your password. Cllck Advanced, open the DNS tab, and change the server addresses to the following:
8.8.8.8
8.8.4.4
That's Google DNS. Click OK, then Apply.
In Safari, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. If you’re using another browser, empty the cache. Test. Any difference?
Notes:
1. If you lose Internet access after making the above change to your network settings, delete the Google servers in the Network preference pane, then select the TCP/IP tab and click Renew DHCP Lease. That should restore the original DNS settings; otherwise restore them yourself. Remember that you must click Apply in order for any changes to take effect.
2. I don't use Google DNS myself, though I have tested it, and I'm not recommending it or any other DNS provider; the server addresses are offered merely for testing purposes. There may be privacy and technical issues involved in using that service, which you should investigate personally before you decide whether to keep the settings. Other public DNS services exist.
Maybe you are looking for
-
Open Hub not extracting all data in CUBE
We created an FI-SL cube and use the OPEN HUB process to extract the current value of accounts. The problem is that not all the data is being extracted. I have a couple of examples where some of the data in the CUBE is not being extracted by the OPE
-
Can anyone please explain this code to me?
I am a new (junior)programmer?Can anyone please explain this code to me in lame terms? I am working at a client location and found this code in a project. _file name is AtccJndiTemplate.java_ Why do we use the Context class? Why do we use the propert
-
www.nssgranite.com Online, scrolling down and to the right, there is a white box that is linked to a different web site of mine. I don't want that box to be there, but I can't find it in design mode nor preview mode when working with the Muse program
-
Tv programmes now not showing! Could they be stored elsewhere?
I have downloaded tv series and they were stored under videos, these have now disappeared , I have restored I pad and could see them being synced but still not showing, videos and films are there but not tv programmes , the whole folder is gone
-
How to work BBM for Android if still a BBM user on a BB Z10?
Ok here is the thing, I still use my Z10 and I also have a Samsung Galaxy X; that I use for work, so now that I can get BBM on Android, if I use my existing BBID, will it generate a new pin for my Android device or should I use my work email, to crea