I need help with connecting an external HD to Airport Extreme base station

So i have the base station set up, and it recognizes my hard drive in the airport utilities and have the file sharing turned on, but when i connect to the base station wirelessly from my macbook pro, the hard drive and base station does not show up in the shared section in my finder. Any ideas as to whats up?

I'm having a similar problem, and I hope you'll excuse my ignorance but is there a difference between rebooting and just restarting. I've done the latter (numerous times) but not the former.
I have set up my Airport Extreme Base Station to my wireless router (DSL Internet connection) and to an external hard drive (MyBook Essential 640GB with USB connection). Internet works fine.
When I plug the hard drive directly into my MacBook it recognizes it fine, I can copy files to it, add folders, explore them etc.
When I plug the hard drive into the Base station, it appears as a network drive on the side bar of my finder window, but when I click on it to open it, it is empty, it shows 0 items and the available memory, but none of the files I put on it are visible to explore.

Similar Messages

  • Please help me connect eMac, cable modem, and Airport Extreme Base Station

    I connected Ethernet cord from cable modem to Airport Extreme Base Station and then another Ethernet cord from Airport Extreme Base Station to eMac, but I could not get internet access on my eMac that way. I'm only getting internet access by directly connecting eMac to cable modem. Can someone please help me with a step by step explanation of how to set these 3 machines up so that I can have internet access on both my eMac and, wirelessly, on my new MacBook. Thank you very much in advance.
    eMac & MacBook   Mac OS X (10.3)  
    eMac & MacBook   Mac OS X (10.3)  
    eMac & MacBook   Mac OS X (10.3)  

    jenngee, Welcome to the discussion area!
    Ensure that you power off the cable modem for a minute or so when you switch it to another Ethernet device.
    Ensure that you are connecting the WAN port of the AirPort Extreme base station (AEBS) to the cable modem. The eMac should connect to the LAN port.
    The steps for setting this up can be found in the "Designing AirPort Networks" (direct PDF link) document. Look through that document and try to get it setup. Then return here if you have more questions. Don't forget to post what you tried and the issues you encountered.

  • Web Sharing with Leopard 10.5.2 and Airport Extreme Base Station HELP!!!

    Ok...I want to set up web sharing on my computer but so far my attempts have failed.
    I have an intel iMac with Leopard 10.5.2 installed and I have the latest Airport extreme base station (With draft n).
    I turn on web sharing, and of course it works locally but not when trying to be accessed over the internet.
    Now I realize that by default my routers address wont let anyone connect to my computer over the internet.
    My router has an ip of 10.0.1.1, and I assigned my computer a static ip address of 10.0.1.200.
    Now in the network preferences pane and the airport category, i set my computers IP (the 10.0.1.200), I put the gateway as 255.255.255.0, the router as 10.0.1.1 and the DNS as 10.0.1.1
    Now going over to the airport utility I added a new entry in the port mapping section, with port 80 (both public and private) and the IP of my machine, 10.0.1.200.
    Now in theory this should work but NOOOOO.
    Does anyone have the same setup? a wireless network with the new airport extreme base station and has successfully configured Web Sharing?
    Thanks in advance.
    Felipe

    Well here is an update.
    I saw an entry in apple support that said I had to change some setting in the apache folder /etc/apache2 in order to avoid getting the 403 forbidden error. I tried this and it did not work, i checked my user configuration file as well and the path to my home site directory was correct
    Anyone here have a similar setup and has it working? It shouldnt be too hard to set up web sharing through a router. It has to be possible or else a lot of people would not buy a router because of this.
    thanks in advance to anyone kind enough to help
    Bye.

  • Mac Book pro can't connect to Internet through Apple airport extreme base station

    I had problems connecting to the internet in the past with my macbook pro.  One day it suddenly started working again but then I bought a second apple TV I lost connectivity.  I have tried changing the IP address manually and while it shows me connected to the wifi I am still with out internet.  When I hooked up the new Apple TV that I bought it booted my computer from it's ip address.  The apple TV though wouldn't work and now nor would my computer.  I ended up setting the Apple TV's ip address manually and now it works fine. My computer on the other hand does not no matter if I set it manually or not.  Even if I plug in the ethernet cable from the base station it doesn't work.  It show that it has a self assigned IP address.  After I set it manually it shows that I am connected both via wifi and the ethernet cable but I can't connect to the internet.  If I plug the modem directly into the computer bypassing the base station I get internet and it is using the IP address that worked originally.
    It has something to do with the connection from the base station to my computer but this is odd considering every other device I have: iPhone 4, apple tv, apple tv, apple mini with retina display all work perfectly via wifi (newest apple tv had to be set manually as I stated above but now works fine).  When I check the ip of the base station itself it seems to be different from the ip of the computer when the computer was connected directly to the router.  I don't understand why my computer now can't connect to the internet via the base station whether it be wifi or by ethernet.  Can you please help me trouble shoot this?
    I have an AirPort Extreme base station which allows up to 50 users and a 30 meg connection speed.
    I have a MacBook Pro (17-inch Early 2009), OS X Mavericks (10.9.2)

    It has something to do with the connection from the base station to my computer
    I don't think so..
    I just posted a reply which totally vanished.. strange strange website now.
    Please post some screenshots of your AE setup from the airport utility.. I want to see the summary page, then the network and internet tab.
    Please tell us what modem you use.. is it a router??
    If you have satellite or 3G wimax etc service they often are limited to 5 IP addresses... the AE takes one and then 4 more devices can join .. no more.
    You need to also give us the screenshot of the IP you are getting in a computer that works.
    EDIT
    Sorry this is half double post.. the previous page refused to display.. now it has returned..

  • Can't connect to a VPN through Airport Extreme Base Station

    I'm unable to connect through my Airport Extreme Base Station to my office via VPN. Is there something needed to be set up specially?
    I'm using a notebook with WindowXP which connects to internet just fine.

    Here is info:
    Airport Utility finds an Airport Extreme with 802.11n(fast ethernet)
    Base Station Name: Home
    IP Address: 10.0.1.1
    Airport ID: 00:19:E3:FA:A8:32
    This is not the IP address of the modem. Even though light is green on Base station the ATV doesn't make the wireless connection.

  • Wirelessly Connecting HP Laserjet P3015 to Airport Extreme Base Station

    Hi, I just purchased a new Airport Extreme Base Station, and was able to establish an internet connection to it.  I'd like to find out if it's possible to connect the HP Laserjet Enterprise P3015 to the Extreme, wirelessly rather than via a USB Cable.  I've looked at the HP page for this printer, but I'm baffled by all the lingo.  I believe it's a newer model of HP printer (or maybe it isn't?) but I bought it new from HP recently.
    http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?contentType=S upportFAQ&lang=en&cc=us&docIndexId=64178&taskId=101&prodTypeId=18972&prodSeriesI d=3815797&printver=true#10
    Is there a term for the type of printer that can be wirelessly connected?  Should the printer, by default, give off a signal that I can pick up?  I don't see anything popping up in Airport Utility 6.3
    I'm using OS10.7.5 by the way.
    I'm off to post a message on the suitable HP forum (if I can find it ) but I'm so used to the Apple Community knowing what's what, that I was hoping that some kind soul here might just have experience with this.
    Thank you.
    PS.  From what I can understand from the "Trouble-shooting FAQ," wireless printing is possible, but I just don't see an option for syncing it up with a MAC?  Maybe it only works with Windows?

    wuzradioman
    I don't see where the P3015 printer is wifi capable.  Therefor, you cannot use wifi to directly communicate with it.
    Thanks for the reply Wuzradioman.  I dug around (several) of HP's sites and it looks like the info was slightly different for the same printer listed on both the Home and Business sites.  I did find a link on a 3rd HP page (which I've since misplaced!) that indicates that the P3015 requires a wireless card to be installed.  But when I clicked the link for "accessories and additional hardware" a link to the card was nowhere to be found.  I'll try to dig up that link in the event that some other poor soul has the same printer and a similar question.
    Vernon Alexander
    I find the HP printers (they're called wireless printers by the way) to be cumbersome to connect wirelessly. there's a lot of manual work involved that can be time-consuming. For example, I found it  incredibly irritating to enter the  wireless access passcode.
    Thanks for the reply.  After talking to some other people, this seems to be the consensus on wireless printing.  I guess there's a reason, esp. in enterprise environments, that printers are often hard-wired.
    Bob Timmons
    you can run an Ethernet cable over a much longer distance than a USB cable, so Ethernet might be the best option, and the one I would prefer.
    As far as wireless, If you connected an AirPort Express to the printer and disguised it near the printer, then you could locate the printer anywhere you want and have it connect using wireless to the network.
    Instead of installing a wireless "card" inside the printer, you use an outboard device to accomplish the same task.
    Thanks Bob.  I did end up hooking up via a Cat-5e cable from printer to Airport Extreme base.  Previously, I had the printer hooked up via USB cable (at a shorter distance) to my Airport Express, which the Extreme now replaces.
    Unfortunately, I can't seem to get the HP Laserjet P3015n printer recognized after having connected it via Cat5e cable to the Airport Extreme.   1) there's still somethign about it being attached to the old Airport Express (which is now used to extend my network.  2) The P3015 is identified as a P3010 - which is a carry-over from when I had originally set up the printer on my (then) main base station which was the Airport Express.  I didn't (or rather "stopped") questioning the fact that the P3015 was recognized as a P3010 just because it was the only way I could get the printer to be recognized at the time.\\
    But I suppose this new challenge merits a separate thread, which I'll start after I do a search of the support forums.  Maybe there's something obvious I'm not doing to get the printer sorted out.

  • Can't see External HD through Airport Extreme Base Station

    I have upgraded to the Apple Airport Extreme Firmware 7.1. Previously I was unable to see my 2 External HDs that are connected to the base station via a powered USB hub. Both of the HDs are FAT32s. I had hoped the firmware update would resolve the problem. But I am still not seeing the HDs. I connect to the base station wireless through a MacBook.
    Any clues/help would be appreciated. I've scanned through several posts and seen people with similar problems and others that can see their HDs but not some files.

    I suggest using the following instructions to re-check your AirPort Extreme Card/Antenna cable installation in your G4 iMac just to be sure nothing was missed: iMac (17-inch 1GHz) and iMac (USB 2.0): Customer-Installable Parts Instructions
    Also, check that the antenna cable is firmly attached per this Apple Article: http://docs.info.apple.com/article.html?artnum=108039
    I have the base station connected to a pc so I can't download iStumbler.
    For the PC, you can use NetStumbler instead.
    I'm not sure how to check if a signal is being sent through Airport utility.
    Instead of the AirPort Utility, you can use the Internet Connection utility to verify signal strength of your base station. To access this utility, just right-click the AirPort status icon in the menu bar, and then, select it from the drop-down menu.

  • Setting up USB External Drive to Airport Extreme Base Station

    I've attached an External Hard Drive to my AEBS. My base computer is connected to the AEBS via Ethernet Cable and can see the external drive under Networked Drive however it shows up twice as Drive Y and Drive Z both showing the exact same capacity.
    My desktop computer is running windows vista, and my laptop is also running vista. My Laptop connects to the AEBS wirelessly. The laptop does not see this External Hard Drive. How do I get my laptop to recognize this drive? Shoule my external hard drive display with two different drive letters, or should it only appear as one? I've not had much luck using this feature of the airport extreme and was the basic reason i purchased the AEBS

    The USB port on the AirPort Extreme will support drive formats of Mac OS Extended (Journaled) and FAT32. NTFS is not supported, so that might explain some of your difficulties.
    What feature did I invoke that automatically established a "third" drive? Where is it established on the physically formatted Mac drive? Does the format of Appleshare just indicate how the partition is accessed?
    Not sure about this. When I format a drive as Mac OS or FAT 32, I see a single drive when accessed from the Finder.

  • HT3500 I am trying to hook up my new Canon MG5320 printer wirelessly to my MacBookPro with OSX.8.2.  The Airport Extreme Base Station does not have a WPS button and so I seem to be stymied even though the printer detects the Airport Extreme.  Suggestions?

    I am trying to set up my new Canon MG5320 printer to my wireless network.  However, there is no button on the Airport Extreme to push when I get to that step in the set-up directions.  I am using OSX.8.2.  Suggestions please!

    If the display shows the "Press and hold the WPS button..." message on the MG display, press the red Stop button on the MG and then select Standard Setup. The MG will search for networks and should display your Airport Extreme's network name. Select this and then enter the password to connect to this network.

  • Why can I no longer print from my Windows XP computers to my Bonjour connected Canon printer thru an Airport Extreme Base Station (f/w 7.6.4, model A1301)?

    Something has changed recently and I haven't figured it out.  My 2 Windows XP computers are no longer able to print via Bonjour.  I have tried removing and reinstalling Bonjour.  Upgrading the firmware on the AIrport Extreme Base Station and comparing Port settings from an able to print Windows Vista laptop.  Port settings match and Bonjour says it sees the printer...but the communication is not happening between the computer and the networked printer, it times out and produces an error in the print que.  Both XP computers have no problem using the internet via the Base Station.  One is wired and one is wireless.  Thoughts?

    Sounds a bit like a problem being discussed in this thread:
    http://discussions.apple.com/thread.jspa?threadID=2651093&tstart=0
    I suspect some kind of update is at fault. Like you, my printer/base station setup had been working fine until recently.

  • This Airport Extreme base station can't connect to iCloud

    I have a Airport Extreme base station (model A1408) running firmware 7.6.4.
    In troubleshooting a Back to My Mac issue, I noticed that the configuration page for the base station had a yellow dot next to my apple id in the "Back to My Mac" section of the "Base Station" tab, with words underneath that say, "This Airport Extreme base station can't connect to iCloud".
    When I delete the id and re-enter it, the dot goes green and no errors are generated (the id/password tokens are accepted). Then, I push "Update", and after the base station comes back, the light is yellow again. (To be clear, the dot next to the apple id is yellow, not the base station status light, which is always green.)
    I'm connected to Xfinity Cable Internet service via a Motorola SB6141.
    Everything iCloud related works for my various iOS and MacOS devices except Back to My Mac.
    Can anyone point me to a solution? I've already been through Apple's troubleshooting and support docs related to Back to My Mac.
    Thanks in advance!

    NEVER MIND!
    After reverting to the old LinkSys router, I left the AEBS powered up all night. This morning, I tried once again and the AEBS mysteriously started working with my laptop after reconnecting and power-cycling the cable modem. Go figure!
    Unfortunately, the iMac in another room doesn't seem to be able to join the new network, but I'll close this thread and perhaps open a new one after doing some more trouble-shooting.
    Thanks for your comments and suggestions.
    -- Mike

  • Help - Kodak 5300 printer doesn't work w/ Airport Extreme Base Station

    Hi All,
    Running a MacBook on OS 10.4.11 (airport extreme card) and an I-Book on 10.3.9 (airport card) - just bought an airport extreme base station and a Kodak 5300 all-in-one printer. Base station works fantastic with internet and both CPUs. Kodak printer works great when directly connected to laptops by USB. When printer connected to USB port on Base station it recognizes printer but wont print. Set-up printer with Bonjour settings - but printer won't print with WiFi. "Printer not responding" window appears. Have phoned Kodak support. They tell me the printer should work on Wi-fi but I should contact Apple. Have phoned Apple support - they're stumped. Kodak website recommends using a Silex wireless router with this printer and claims it is compatible - so it can handle wireless set-ups.
    Has anyone out there had success with the Kodak 5300 and the Airport Extreme Base Station? It's a great printer that uses very little ink (inexpensive cartridge replacement). I really don't want to fall back on my old Epson.
    Thanks for any thoughts/solutions.

    Hi Ron! Thanks for checking inside Kodak. I agree as a first printer from kodak it's a good one, and I certainly appreciate the attempt to buck the industry-standard of milking the customers on ink.
    However, I'm not willing to go buy a silex device, when I already HAVE a device: the apple airport. I also got a reply from kodak support indicating that they didn't want to comment on future products, etc etc. Maybe I'm misreading this by assuming product == hardware, but I'm certainly not willing to ditch my current printer for a newer model for what I consider to be a DRIVER issue (I could be wrong of course). Maybe a firmware issue, but certainly not a hardware issue.
    What I expect from Kodak is a new driver and/or firmware that would make this work with the apple airport. On the one hand I can understand not wanting to divulge company secrets and upcoming "products", but for a newer driver, I would expect to hear a "we're aware of the problem and are working on a fix". That would go MILES towards making me more patient and less irritated with Kodak. Telling me to wait for newer "products" or go buy a silex is a good way to loose customers.
    So if you have any internal clout (or a message board), be sure to raise cain there for them to do the right thing.
    jan
    P.S. At the current time of writing, the silex website is not operational ("This site is temporarily unavailable. Please notify the System Administrator"). Way to go silex!

  • How can I get Time Machine to back up an external hard drive (iPhotos) that is attached to airport extreme base station. Note: Time machine is usb to macbook pro and external drive with iphotos is usb to airport extreme base station. Help please. Thanks!

    How can I get Time Machine to back up an external hard drive (iPhotos) that is attached to airport extreme base station. Note: Time machine is usb to macbook pro and external drive with iphotos is usb to airport extreme base station. Help please. Thanks!

    Once you have the drive connected to your Mac, click System Preferences (gear icon) on the dock
    Click Time Machine
    Click Options
    Be default, the hard drive will be Excluded from backups. Click the drive to highlight it, then click the "-" (minus) button at the bottom of the list to remove the drive from Excluded items.
    The drive will be backed up on the next Time Machine pass
    Everything above assumes that the hard drive has been formatted in Mac OS Extended (Journaled) as Time Machine will only backup drives in that format.

  • External hard drive on Airport Extreme Base Station - need some help!!

    Can you suggest an external drive make and model that works with the extreme? Need around 300 gb?
    What format should the drive be in so my Windows Vista and Windows 7 and my mac will be able to backup to it?
    What backup software do you recommend that I run on my Windows Vista and Windows 7 PC to it?
    Thanks

    Can you suggest an external drive make and model that works with the extreme? Need around 300 gb?
    There are literally dozens of external USB hard drives that will work with the 802.11n AirPort Extreme Base Station (AEBSn), but of course, not all. Please check out the following iFelix site to see some that are not recommended. FWIW, I currently use both a Newertech miniStack v3 (750 GB) & a Western Digital MyPassport (500 GB) with my AEBSn without any issues.
    What format should the drive be in so my Windows Vista and Windows 7 and my mac will be able to backup to it?
    HFS+ for the most efficiency between the AEBSn & the drive(s). Note that the AEBSn's file server will support both AFP & SMB when communicating between Mac & PCs (respectively) for file services. If you don't have a Mac, you can always format the drive in FAT32. Only NTFS (or any of the Linux partition formats) will not be supported by the AEBSn file service.
    What backup software do you recommend that I run on my Windows Vista and Windows 7 PC to it?
    I use Genie - soft's Genie Backup Manager, but just about any backup software that supports network-attached drives for backups should be fine.

  • Incompatibility Issues with connecting USB Hard Drive to Airport Extreme

    Over the last few days i have been fiddling around with my new Airport Extreme Base Station N router. I can connect a printer and use the internet through it seamlessly. I can even share two of my hard drives through a USB hub, however, my Maxtor 500 gb One Touch 4 HDD will not connect with my macbook through AEBS. It is only this drive that is not working with AEBS and it is the one i need to be connected and sharing. If i plug my 500gb Maxtor directly into my macbook it works fine, i can read all the files. This drive is formated as Mac OS Extended (journaled).
    I am about to give up on this because i have tried everything:
    1. Reformatted HDD
    2. Downgraded Firmware
    3. Searched Forums for advice
    4. Reconfigured AEBS in, i think, every way possible
    So, these are most of the things ive tried and so far there is no solution in sight. I have one hypothesis: my particular HDD (Maxtor 500gb One Touch 4) is incompatible with AEBS at this time, but it is possible that a future firmware update could fix this.
    Does anyone have any advice? I'm lost and disappointed. Please help, thanks.
    Message was edited by: benjaminwooda

    Chances are pretty good that the power draw of your external drive is just at the "tipping point" for what the USB port on the Extreme can deliver. Powered USB hubs are inexpensive and should help in this situation.

Maybe you are looking for