I need help with extracting from my home movie

I made a home movie 3 years ago in idvd. How can I extract one of the scenes and post it on my web page,
Mike

As a movie or as a still frame?
Consider DVDxDV from http://www.dvdxdv.com/DVDxDV.overview.htm to extract a movie
or
Snapz Pro x from http://www.ambrosiasw.com/utilities/snapzprox/ to extract still frames (and since it can also capture movies from your computer screen, you could also use it instead of DVDxDV to capture a movie clip for web use).

Similar Messages

Please i need help with switch from the us store to malaysian store how i can switch

Please i need help with switch from the us store to malaysian store how i can switch

Click here and follow the instructions to change the iTunes Store country.
(82303)

HT1766 I need help with restore from bachup

I NEED HELP WITH MY IPAD RESTORE FROM BACKUP

This is the iPod touch forum and you are not providing any information to help you.

Need help with sum from previous years

Hi All,
In a report i have 4 fields. The first field shows the YTD invoice totals for the current FY 2010 (which i accomplished). The other 3 fields are :
2nd field Sum of the value of invoices for the FY 1YEAR prior to the current year
3rd field Sum of the value of invoices for the FY 2YEAR's prior to the current year.
4th field Sum of the value of invoices for the FY 3YEAR's prior to the current year.
How can i get the desired results for the second,third and the fourth fields, please need help or advice.
Thanks

Hi
If you have the values for several years in the same report you should be able to do what you want using the analytic LEAD and LAG.
LAG will retrieve values from previous rows whereas LEAD will retrieve values from following rows.
The basic syntax is the same and look like this:
LAG(value, offset) OVER ({optional_partition_clause} ORDER BY mandatory_order_clause)
The ORDER BY clause is mandatory and cannot be omitted. However, this ORDER BY has nothing to do with the sort order you manually create in the worksheet. Generally, most people will set their sort order the same as the ORDER BY in the calculation.
Here's an example that gets year to date from 2 financial years ago:
LAG(YTD,2) OVER (ORDER BY FY)
You have to understand that Discoverer will pull values from previous rows not from previous cells as displayed on the report, although if the cells may happen to be rows too then it will appear as though it is pulling previous cells. I personally am very experienced with analytuc functions and can make manipulate data within Discoverer just about any way that I want. Generally, if I can see data on the screen even when they are in different cells or rows I can create functions to manipulate it. This capability only comes about as a result of experience and I would strongly advise you to practice with the analytics and see if you can at least master some of them. You'll find your Discoverer capabilities will improve dramatically and you will become a great asset at work.
When working with a new report I generally duplicate the report as a table so that I can see the values. Then if I need to sort the items in order to line up the values I want to work with I do so. Having worked out what sort order I need I can then see what offset I use then I create the analytic and use it in the main worksheet.
Hope this helps
Best wishes
Michael

Need help with extracting a faint reflection from a window with Photoshop CS6, from a jpg photo

I was wondering what tools are needed to be used to extract a clearer image of a reflection in a photo.
I am using Photoshop CS6 (64 Bit).
I don't know what else I should add. Please ask, and I will answer as much as I know.
Regards,
Isa

Semaphoric
I asked the photo owner and was told that they don't want their picture posted in public. So, I can't provide that specific image.
Perhaps if you may, could you please find a picture of a person reflected in a window (shopfront) and see if you can make the reflection of the person anymore clearer?
Here, watch this video for a better idea of what I am after: CSI Magic
I am the first to admit that this video clip is a far-fetched possibility (read, impossible from such a distance and angle), but a reflection from a much closer object (it was of a lady taking a photo around 2 metres/6 feet in front of a shopfront, to get her friend some contact details. She is [not so] clearly visible within the reflection), may be able to grab more of her details from the reflection.
I almost feel like going out and taking a picture myself to describe the situation more thoroughly, as I believe the way I worded my initial request may be misleading, as chilecayenne seemed to be misled by it. However, if anyone else could take/provide such a photo, and post it up here, I would really appreciate it.

I need help with programs from my MacBookAir.

Hello. I've intalled programs on my MacbookAit that I don't need anymore and I have no idea how to remove them from my laptop. I've been a PC user and I knew there how to remove them but here I just don't know. I know that dragging them to the trash won't work. I want to remove them and free the space that is taking. I hope you guys can help me with this. Thank you Very Much!!!

Uninstalling Software: The Basics
Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash. Applications may create preference files that are stored in the /Home/Library/Preferences/ folder. Although they do nothing once you delete the associated application, they do take up some disk space. If you want you can look for them in the above location and delete them, too.
Some applications may install an uninstaller program that can be used to remove the application. In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
Some applications may install components in the /Home/Library/Applications Support/ folder. You can also check there to see if the application has created a folder. You can also delete the folder that's in the Applications Support folder. Again, they don't do anything but take up disk space once the application is trashed.
Some applications may install a startupitem or a Log In item. Startupitems are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder. Log In Items are set in the Accounts preferences. Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab. Locate the item in the list for the application you want to remove and click on the "-" button to delete it from the list.
Some software use startup daemons or agents that are a new feature of the OS. Look for them in /Library/LaunchAgents/ and /Library/LaunchDaemons/ or in /Home/Library/LaunchAgents/.
If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term. Unfortunately Spotlight will not look in certain folders by default. You can modify Spotlight's behavior or use a third-party search utility, Easy Find, instead. Download Easy Find at VersionTracker or MacUpdate.
Some applications install a receipt in the /Library/Receipts/ folder. Usually with the same name as the program or the developer. The item generally has a ".pkg" extension. Be sure you also delete this item as some programs use it to determine if it's already installed.
There are many utilities that can uninstall applications. Here is a selection:
AppZapper 2.0.1
AppDelete 3.2.6
Automaton 1.50
Hazel
AppCleaner 2.1.0
CleanApp
iTrash 1.8.2
Amnesia
Uninstaller 1.15.1
Spring Cleaning 11.0.1
Look for them at VersionTracker or MacUpdate.
For more information visit The XLab FAQs and read the FAQ on removing software.

Need help with roaming user profiles, home folder on server - symptoms after Windows reinstall on workstation

Hello. I have deployed roaming user profiles in our home office. We are using Windows Server 2012 on our datacenter computer, which has a partition with all our home directories. All was working beautifully for quite some time.
I re-installed Windows 8.1 Pro on my laptop. I am able to log in to my profile from the new installation.
The problem that has started happening seems to be some sort of permission problem with my home directory, but I am not sure how to go about diagnosing it. I haven't changed anything in the policies or remote profiles.
The symptoms:
When I try to run an installation program from my documents/downloads/desktop (remote) folders, UAC asks for the administrative credentials as expected, and then I am asked to enter my user credentials. If I do so, I sometimes get a message about duplicate
connections to a share, and the installation program does not execute. "Multiple connections to a server or shared resource by the same user, using more than one user name, are not allowed. Disconnect all previous connections to the server or
shared resource and try again." I am confused, because I am entering credentials for the same user name as the one I am logged in with.
To work around, I have to copy the executable to a folder on my workstation hard drive and run it from there.
Another symptom is when I download anything from the internet, chrome will reflect a "Failed - Download error" message with the download. If I re-attempt the same download several times, eventually it will succeed. This appears to be due to my
downloads folder being on the remote computer.
I am looking for any guidance on how to remedy these symptoms. I suspect there must be a setting I have forgotten to change in the local computer, because nothing has changed on the server since it was operating properly.
Thank you for your time.

Hi Exintrovert,
Thanks for posting here.
According to your discription above, you can check the microsoft artical as below:
https://support.microsoft.com/en-us/kb/938120/
Would you please have a try the work around in the artical and then let us know the update?
Looking forward to your feedback.
Best Regards,
Elaine
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Need help with upgrade from Adobe Creative Suite to PS CS4

My old laptop with Photoshop on it crashed and I ended up purchasing a new laptop.
I'm trying to reload my PS CS4. I am using an upgrade from an educational Adobe Creative Suite Premium to the CS4 and when I loaded it on my old laptop I had to get installation help through customer service, but now customer service will not help me since it is CS4.
When installing the upgrade, it tell me to select the product I already own. I own the educational full creative suite, but am only upgrading the Photoshop. I chose Photoshop CS and tried entering the serial number for the suite. It tells me that the serial number doesn't match the product chosen. Of course the only products I'm allowed to choose from is Photoshop CS, CS2, or CS3 and not Creative Suite Premium.
The other serial numbers on this CS is Golive CO and Pagemaker Plug-in.
I was told there are Adobe customer service reps here on the forum, please tell me what it was I need to do to get my Photoshop installed.
Thanks

i wasn't aware that you could get a ps4 at an upgrade price using an older creative suite produect. i searched online and found this thread (http://forums.adobe.com/thread/476009) which makes it appear that was not a valid upgrade path.
but, if you're confident that was a valid upgrade path, i'm pretty sure something will need to be done on adobe's end and no amount of manipulation, on your end only, will work.
your best bet would be to get help in this forum from an adobe staff member like jeff wright who is very knowledgeable and goes out of his way to help adobe customers. to that end, if i were you, i would start a new thread mentioning his name in your title and in your initial post explaining:
you have the educational Adobe Creative Suite Premium and purchased a photoshop cs4 upgrade years ago that required adobe support help to install years ago.
that worked well until a recent computer problem forced you buy a new laptop and you are now trying to reinstall that ps cs4 and again need support help but have been refused help because cs4 is not current.

HT1296 Need help with sync from phone to computer

When I sync my phone to my laptop, I would like info I entered on the calendar on my phone to be added to the calendar on my computer. I can only get it to sync from computer to phone. I need to update both
any ideas. I have searched the help files and can't find this anywhere

My problem is similar. I just upgraded from the 4S to the 5 and I used to be able to sync the calendar on my iMac and iPhone using iCloud without getting duplicates by selecting/deselecting the appropriate calendars on the respective devices. Everything synced as I entered it.
I'm pretty sure it was working with the 5 until recently...
Today I noticed that an event I entered on the 5 for last week didn't show up on my iMac. When I checked the EDIT screen on the phone to see what calendars were checked, only the calendar for that event was (on the All on my iPhone). All but the Unfiled calendar are checked on the All on my iCloud. When I unchecked and rechecked the calendars under the Phone didn't help. Can't get the thing to sync...
Seems like most people are having problems with Exchange accts, but here I am with my iMac/Phone/Cloud...

Need help with calc from tables

I have a table that contains query #1 and have another table
that contains a field that needs to use the result of the cfset in
another calc.
The new calc in query #2 needs to divide the Num_Checks_Trans
from query #1 by the by the Weekly_Hours_Recorded in query #2.
Can anyone help me figure this out?
<b>1.</b>
<cfquery name="QryEmployeeDetail"
datasource="NBProdReports">
SELECT TblContractInfo_SubMenuTable.User_ID,
TblContractInfo_SubMenuTable.Contract_Number,
TblContractInfo_SubMenuTable.Transaction_Type,
TblContractInfo_SubMenuTable.Num_Checks_Trans, TblTransType.Value,
TblContractInfo_SubMenuTable.Notes, TblMasterTrans.Date_Opened
from TblContractInfo_SubMenuTable, TblMasterTrans,
TblTransType
WHERE TblContractInfo_SubMenuTable.Task_Number =
TblMasterTrans.Task_Number
and TblTransType.Transaction_Type =
TblContractInfo_SubMenuTable.Transaction_Type
And TblMasterTrans.Date_Opened BETWEEN
#createODBCDate(DED_startDate)# AND #createODBCDate(DED_endDate)#
order BY TblMasterTrans.Date_Opened ASC,
TblContractInfo_SubMenuTable.User_id ASC
</cfquery>
<cfset totalTrans = 0 />
<cfloop query="QryEmployeeDetail">
<cfset totalTrans = totalTrans +
(QryEmployeeDetail.Num_Checks_Trans * QryEmployeeDetail.Value)
/></cfloop>
Text
2.
<cfquery name="QryEmployeeDetail"
datasource="NBProdReports">
SELECT TblContractInfo_SubMenuTable.User_ID,
TblContractInfo_SubMenuTable.Contract_Number,
TblContractInfo_SubMenuTable.Transaction_Type,
TblContractInfo_SubMenuTable.Num_Checks_Trans, TblTransType.Value,
TblContractInfo_SubMenuTable.Notes, TblMasterTrans.Date_Opened
from TblContractInfo_SubMenuTable, TblMasterTrans,
TblTransType
WHERE TblContractInfo_SubMenuTable.Task_Number =
TblMasterTrans.Task_Number
and TblTransType.Transaction_Type =
TblContractInfo_SubMenuTable.Transaction_Type
And TblMasterTrans.Date_Opened BETWEEN
#createODBCDate(DED_startDate)# AND #createODBCDate(DED_endDate)#
order BY TblMasterTrans.Date_Opened ASC,
TblContractInfo_SubMenuTable.User_id ASC
</cfquery>

This can be rewritten as a single query which is good for a
number of reasons, including we only make one trip to the database
and we do our calculations on the SQL backend, which is faster than
doing them in CFML.
What you're going to want to do is SUM() the total
transaction values by having a column like SUM(Num_Checks_Trans *
Value) AS totalTrans. To get the value for your other column you
can calculate that like Num_Checks_Trans / Weekly_Hours_Recorded. I
didn't see the latter in either of your queries so I'm not sure
where it comes from, but you can definitely use it in your SELECT
clause when calculating.
Since SUM() is an aggregate function, you'll have to use a
GROUP BY clause to make it work. You'll have to GROUP BY each
column in the SELECT statement. If some of the columns have
differing data that you won't want to use in the GROUP, you can
always use a nested subquery as part of your FROM clause and then
join that to the original queries with the totals.
I hope that helps.
- William

Help with extraction from 0CO_OM_CCA_9

Hello Experts,
I need your help urgently.
Iam doing CO extraction with the 0CO_OM_CCA_9 DataSource.
I have made one append to the extraction structure and filled the fields in function module EXIT_SAPLRSAP_001.
Everything worked fine till this moment.
My problem is that I cant retrieve data only in productive system. In development and Quality systems the append fields are filled.
I have transported everything one more time, but the problem remained.
I have Go Live next Monday, and I would appreciate your help on this.
Best Regards,
João Arvanas

Hi Jaya,
The problem is solved.
Thank you for your suggestion.
The problem was with the Package in which the Exit was included.
I have awarded points.
Best regards.

New ipod need help with songs from old one NEED HELP!!!!

I got a new ipod nano 3rd gen. but it wont let me take all of my old songs from my old ipod(nano 1st gen) and put them on my new one! I dont want to lose my songs so PLEASE HELP!!

When I did that on my old ipod and it said doing so will delete all the songs on it and replace it with my library. When I did it on my new ipod it just put the songs that was already in that playlist back on the ipod, not the songs that i need from the old one.

Need help with restoring from backup.

My wife's macbook pro ( 2.53 processor 4 GB Ram) recently had its hard drive call it quits.
I ran a back up the day prior to taking it to the Apple store, they replaced it with a 500 GB hard drive for very cheap. That I am very grateful for.
I came home, wife has already logged on/set up the laptop as a new laptop. Apple upgraded the OS while it was in their possession to 10.9.2. The last back up was on Mountain lion 10.8.
How can I get all the files (iPhoto being hugely important) from the 10.8 backup onto this 10.9 laptop? I can't restore from Time Machine because it isn't the correct OS nor is the same laptop (in its mind due to new hard drive and her setting up as a new laptop.)
I greatly appreciate the help in advanced, any links or "How to" threads would be wonderful!!!

Look at the options presented here:
http://pondini.org/OSX/Setup.html
Ciao.

Getting a new G5 - need help with software from old G5

I am about to purchase a new G5 for my home... However I would like to have all of the exact same software and programs that are currently installed on my work computer that is being retired. With out having all of my original software disks, Is it possible to simply transfer all software from old computer to new computer? Or do I have to reinstall everything from original install disks?
PowerPC G5 Mac OS X (10.3.9)

cochrandesigns-
A new machine? Lucky!
You could swap the drive.
Apple does include the Migration Assistant with all of their machines. You simply hook up the two machines via a firewire cable, boot the old machine into Target Disk Mode while holding down the T key, and the Assistant does the rest.
In fact, when you turn the computer on for the first time it should ask if there is anything to transfer and then walk you through the steps.
Luck-
-DaddyPaycheck

Need help with mail from pc

I received some mail from outlook that had some odd characteristics and I'm hoping that someone can help me figure out how to get it to display normally.
1. no header information (I don't see who the sender is, subject, etc. in Mail). The top of the message looks like this:
------=NextPart_000_002201C7B31B.65BC0BE0
Content-Type: multipart/alternative;
boundary="----=NextPart_001_002301C7B31B.65BC0BE0"
------=NextPart_001_002301C7B31B.65BC0BE0
Content-Type: text/plain;
charset="us-ascii"
Content-Transfer-Encoding: 7bit
2. There are embedded table in the message that in one column instead of multiple columns.
In both cases, I can view the messages okay if I log onto the webmail server.

I got it working i tried all the ISO files from microsoft media creation tool and none worked and i dont know why but i checked the sticker on my pc "windows 8.1 with bing" so i googled windows 8.1 with bing iso, donwloaded it and now the key worked

I need help with extracting from my home movie

Similar Messages

Maybe you are looking for