I need help with Final Cup Pro X...Video clip Black Screen

Hi,
While I was editing some video clips for a movie i am making (the files im using are .mov), everything was going fine then i made one mistake on one video then every video went black. There is no audio to the video clips. the begining part of the video played fine but the last clip is black.
the last clip playback is black.
my other clips that are not on the time line playback is black too.
then when i switched the media to show proxy, i got this....
but the beginning of the clips on the timeline
everything was working just fine till i made that one mistake on that one clip.
my mistake was slowing down the clip with with transition. Then **** happened.
Please help.
I really want final cut pro to work for me, I've just started using this software and paid alot for it. I just really want it to work out for me because i heard great things about this software.

Supported media formats
You can import and work with the following video, audio, and still-image formats in Final Cut Pro:
Video formats
Apple Animation codec
Apple Intermediate codec
Apple ProRes (all versions)
AVC-Intra
AVCHD (including AVCCAM, AVCHD Lite, and NXCAM)
DV (including DVCAM, DVCPRO, and DVCPRO50)
DVCPRO HD
H.264
HDV
iFrame
Motion JPEG (OpenDML only)
MPEG IMX (D-10)
Uncompressed 10-bit 4:2:2
Uncompressed 8-bit 4:2:2
XDCAM HD/EX/HD422
QuickTime formats
Audio formats
AAC
AIFF
BWF
CAF
MP3
MP4
WAV
Still-image formats
BMP
GIF
JPEG
PNG
PSD (static and layered)
RAW
TGA
TIFF

Similar Messages

TS2771 I need help with my camera it's shows a black screen. And I have restarted it many times

I need help with my camera it's shows a black screen. And I have restarted it many times

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem. Y are not alones. Sometimes the camera fails.
Apple Retail Store - Genius Bar

I need help with Final Cut Pro 4.5

I'm trying to time myself do something for a school project and I was wondering if FCP's got like a timer effect or something where I can type in the time I want it to end and put it on my video

no built-in counter overlay per se. but you could use the Effects > Video Filters > Video > Timecode Generator
(and crop of the info you don't want to see)
... or you can look at the DH_Counter plug-in from digital heaven
http://www.digital-heaven.co.uk/fcplugins/dh_counter.php

Hello, I need help with my macbook pro. It looks like I cannot install anything anymore. Everytime I try to install a new software, use the migration assistant or click the lock to make changes, it simply does not react.

Hello, I need help with my macbook pro.
It looks like I cannot install anything anymore. Everytime I try to install a new software, I simply get stuck during the installation type process. I put in my password, it does accept it, but it does not go any further.
I tried to reset the password, put no password, repair the permissions, the disk but nothing will do. I nearly got stuck with the log in screen but finally succeeded in disabling it.
So I thought I might try to create a new account but I cannot click the lock to make changes. It simply refuses to react.
I am now thinking about using the migration assistant to save all my settings, data and so fourth, but again I get stuck when I have to type in my password. It accepts it but nothing happens...
I guess it has something to do with the authorization process, but can't find anything on the internet about it... Can you help me out?
I am running Lion 10.7.3.
Regards,
Nicolas.
(I apologize if any grammatical/structural mistakes were to be found, english is not my mother-tongue. )

You probably won't like this suggestion, but I suggest you reinstall Lion.
First, backup your system. Next, reboot your system, press/hold the COMMAND-R keys to boot into the Recovery HD. Select 'Reinstall Mac OS X'. If you purchased Lion as an upgrade to Snow Leopard, the reinstall process will install Lion 10.7.3. If your system came preinstalled with Lion, you might still get Lion 10.7.2. Both installs are a total install of the OS. None of your apps or data will be impacted. Just the OS.

Not happy with Mac book pro retina because of black screen problem.

I am not happy with Mac book pro retina because of black screen problem. This screen failure appears after one year. I was fan of APPLE now I do no support any apple products. When they expires I will renew them with the other products belong to the other companies.

You are entitled to 90 day telephone support from Apple. Try contacting them.
Apple Support Contact
Apple Support contact - Telephone

30p with a Canon XA10 - need help with Final Cut 7 "FIELD DOMINANCE" setting and an explanation of "drop frames". Thank you!!

I shot footage using a Canon XA10 and there are issues with the HD quality not looking as crisp as it should. I am trying to make sure the settings in Final Cut are right. Need help confirming what should be in "Field Dominance" --- have seen discussions about making sure it's set to "none" but I'm confused as to what to do.
Also someone suggested I use "drop frames" to change from 30p to 24p within Final Cut. He couldn't explain how to do it so any input appreciated as well as any thoughts on whether this is a good option to try.

If you're shooting 30p, field dominance should be set to none. Since you need to use log and transfer to bring this material in to fcp, I would assume it would be set correctly automatically. Are you sure you've set the camera properly?
Drop frames will not change 30 p to 24p. Dropframe timecode simply refers to the number assigned to each frame which drops an occasional number (not any frames) so the timecode duration is the actual duration, since 30p videoi is actually 29.97 frames per second which each frame assigned a timecode number.
This is very basic video stuff and requires some basic knowledge of video. Wikipedia is a pretty good resource for much of this stuff plus there are lots of great resources on the web. Look up interlaced and progressive video, 24p and 30p.
And as far as judging quality, you can only get an accurate view of the quality in fcp when you have a video card attached to a video monitor. The viewer and canvas are only an approximation of what the quality is. Minimally, set the canvas or viewer to 100% to get a better approximation of the quality.

Need help with webcam, macbook pro

Please help!
I need to set up a wireless webcam to monitor a litter of puppies while I am at work. Home computer is an iMac 24 inch, at work I can plug in my MacBook Pro, or use the office PC network. I need help in selecting a web cam (wireless, as pups are far from computer) and setting up so I can log on via an internet connection.
Many thanks for your suggestions!

They aren't cheap, and use a browser to view the images. Most require a wireless network at the remote location too ...
Check these out:
http://www.brickhousesecurity.com/wireless-network-cameras.html
http://www.bizrate.com/webcams/wireless-remote-webcam/

Need help with audio wav file in multicam clip

I created a multicam clip with 3 cameras with crappy, far away, room audio and 1 stereo audio wav file with 2 lavaliere mics of "good Audio" 1 lav left & 1 lav right. on one channel there is a lot of distortion from shirt ruffle etc.... but only at times. I would like to ride the mix and use sections of "good" audio and get rid of sections of "Bad" audio from the one channel. but, I cant figure it out. anyone??? I'm hoping Apple updates this issue soon with great audio support with "simultaneos multicam audio switching!!!" Please, Please Apple...

You can do what you need right now, no need for Apple to do anything, they've already don it. Check this out.
http://www.macprovideo.com/hub/final-cut/final-cut-pro-multiclip-audio-channel-e diting-1006

Need help with conversion progrma for MTS video files. Can't download videos from Sony TX-10 camera

Have new macbook pro 13". Can't download videos from our Sony TX-10 camera. I understand I need some kind of conversion program for MTS video files. Need recommendation for a good conversion program to convert the video files.
Thanks, chieftd

Well, sigh, that's not going to work.
I love how I can do months of research to choose the best camera for my needs and budget, which is NO easy task these days, but surprisingly find it on the unsupported list when it's a very popular camera. So, while it seems to support a whole bunch of other AVCHD options from Sony, not the NEX cameras.
The NEX cameras are the latest generation of mirrorless cameras (which, ironically, are great b/c they give dSLR quality still images while actually producing HD video that always records silently and stays in focus b/c it's mirrorless). The NEX 7 was just reviewed as Camera of the Year.
Bleh. Oh well. Maybe someday.
And, for anyone reading, Roxio Toast Titanium did convert it just fine but it took about 20 min or my time to set up a handful of clips and then a couple hours to complete converting them for the quality I was looking for. One was about 10 minutes of a kids' performance on Christmas and it took a long time. It's just not feasible given how many video clips I do with the camera a week - well, feasible when you consider all the cameras where this would be seamless.
Thanks for posting your reply - I appreciate it.

TS2570 i need help with my computer, it only shows a grey screen

i need help!!!!

Give this a try if you have an Apple logo and spinning gear displayed on the screen:
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Need help with new Mac Pro (2012)

Hi for everyone!
Few days ago, I bought a new Mac Pro (Mid 2012) MD770LL/A for my recording studio. The workstation is really powerfull and silent, but it has one major problem for me: computer comes with pre-installed Mac OS X 10.7.3 Lion, and as I understand, I can't install Mac OS X 10.6.8 on this machine. In this case, some plug-ins and instruments, that critical for my works are unavailable for me now. For example - MusicLab RealGuitar and RealLPC thru the VST to RTAS adapter (I'm using Pro Tools in my studio) don't working correctly on a Lion OSX. Unfortunately, I can't find any solution, to fix it... Even on an official support website of that software developers. Secondary, I still need Rosetta for some applications.
In that situation, my studio can't fully work.
So, what I should do??? WHY is officialy impossible to install Mac OS X 10.6.8 on a new Mac Pro, if its components is absolutely identic with Mac Pro 2010, that supported Mac OS X Snow Leo???
Thanks!
With a big hope for a help!
Alexey

Hi!
Good news for anyone, who wants to install Mac OS X 10.6.x on a Mac Pro 2012!!!
As it turned out, the original installation DVD disc from the Mac Pro 2010, fully compatible with Mac Pro 2012! The images of DVD is quite possible to find on the Internet. Just checked on my system - boot from the fresh-burned disc, and Mac OS X 10.6.4 installed without problems! After that, updated to 10.6.8 - and it works!
Personally for me - it is great news!
Everyone have a nice day! Thanks!:-)

Need help with final bill - where to turn?

This seems like a silly place to ask about a billing issue, but here goes. My final bill with Verizon Wireless is messed up. I need to communicate with someone other than Chat - been there, done that, no resolution. Can a Verizon rep help me here?

Thanks for your reply in the Forum. The account with the billing problem is (removed).
I have paid my Verizon bill through CenturyLink for years. I terminated my Verizon service on 8/27, the end date of my contract, and had my cell number ported to AT&T. The most recent bill from CenturyLink had no Verizon charges. The prior month’s bill from CenturyLink was paid, including Verizon service to the end of July.
Last week I got a paper bill in the mail from Verizon for service for the period ending August 25. Since I had not paid for August through CenturyLink, I sent Verizon a check for the billed amount, $35.47.
A couple of days later I got a second paper bill from Verizon saying I owed $3.55. It looked to me that Verizon had processed the August bill through to CenturyLink, and then reversed that transaction. The check I mailed is not shown on the second paper invoice, and has not posted to my checking account as of a few minutes ago.
At this point I have paid Verizon $35.47 for August service, but I have a bill from Verizon for $3.55. Online at My Verizon the balance is $2.45. I think I am square with Verizon and my account should be closed with a zero balance.
Thanks.
>> Personal information removed to comply with the Verizon Wireless Terms of Service <<
Edited by: Verizon Moderator

Needing help with Adobe Premiere Pro

Yes, I know it is ancient but I still use it. I use it for my school's daily news broadcast. We capture our students as if they are presenting a live news program and then assemble in the timeline. We use a miniDV camcorder and firewire. Once we have all of the elements in the timeline, we then are able to play the timeline via the firewire (hooked to the camcorder) through the play/edit mode through a VCR out via coaxial cable to all of the classrooms in our school.
My current problem is that I encountered an error while creating a movie. I have a preset that saves versions every 3 minutes. I tried opening each of them but it just keeps saying it's loading but that is it...nothing ever comes on the screen. I moved a title slide (in a folder outside of the project folder destination) right before I had decided to make the movie. I did get one version to open---finally but thought...well, let's try a later one...so I don't have to "recreate" everything I had just done....then none of them would open...not even the one I got open.
Also, if anyone has any suggestions on a different way to do what I am doing using newer technology...please share.
Finally, is there updates that maybe I need to download or something to continue to be able to use Premiere Pro???
Please share any and all suggestions...desperate in Missouri

John,
Take a trip in the WABAC Machine.
Now, I could be wrong, but when the OP said "Yes, I know it is ancient but I still use it." I assume they meant the original version. The one without a number. The one some people called Premiere Pro 7, or Premiere 7. Or whatever. The one right after Premiere 6.
I remember having to go through the numbering explanation in my tutorials on Premiere Pro 1.5 since confusion reigned. You can still watch the introductory video and get my explanation starting around the 40 second mark.
But, as I said, I could have it wrong. They might have a different version.

Need help with 2008 macbook pro superdrive issue pleasee

hello,
I have this macbook pro
Model Family: MacBook Pro
Display: 15"
Processor Type: 2.6GHz Core 2 Duo
Model Number: A1260
Color: Aluminum
Factory: China
Production Year: 2008
Production Week: 22 (May)
Production Number: 774
200 gb hd
4gb of ram
also apple care til jun 11
OK so I bought the computer for 650 from my friend and soon after buying found a problem. The problem was the optical drive not reading all the disc that I put in the system. So I took the macbook pro to apple they installed a new super drive. I get home today and try to install snow leopard and have a issue. The way I went about was starting up holding the option button and waiting to boot from the disc for a fresh install. First time I tried I got a symbol that look like the restricted sign you see when you cant smoke in a area ect... So I restart and try again this time I get to the install screen click does the estimation ect.. 34 minutes than goes to 28 minutes pretty much has frozen there now, and after waiting all this time about 20 minutes I get the spinning beach ball. Also forgot to say that the super drive is now super dooper annoying loud and make odd sounds too with vibration. So I guess make another apple gen bar apt? And have them possible replace the super drive again?
update just got an error occured while installing mac os x still have spinning beach ball

I'm guessing Apple didn't do a good job. I think you need to make a return trip. And politely remind them that you're making a return trip.

Need HELP with finally() in nested try-catch

hi,
i am having trouble with deadlock and wondering if its due to an incorrect use of finally nested within multiple try catch blocks.
is the inner finally() required, will the outer one get executed, or will the two finally() statements get executed...??
the deadlock happens very infrequently to accurately test.
try {
     try {
     catch (InterruptedException e) {
          return;
catch {
finally {
     //will this be executed be executed by the inner throw statement
}or is an inner finally required
try {
     try {
     catch (InterruptedException e) {
          return;
     //this finally is NEW....is it needed!
     finally {
          //will this be executed. will both get executed
catch {
finally {
     //will this be executed also, or completely ignored if exception throw from inner try/catch
}

inner/outer, which one is executed first?
more info pls.I mean, really. How hard is it to find out for yourself?
public class TestFinally {
    public static void main(String[] args) {
        try {
            try {
                throw new RuntimeException("Whatever");
            } finally {
                System.out.println("Inner finally");
        } finally {
            System.out.println("Outer finally");
}I'll leave it to your imagination as to how to modify this class to confirm the answers to your original question.

I need help with Final Cup Pro X...Video clip Black Screen

Similar Messages

Maybe you are looking for