I need help with iCloud and restoring

I have an app and in order to transfer the account of the app, it says: "If you still have your old device, please sync/back up your account to either iTunes or iCloud. Next, sync your new device with either iTunes or iCloud and restore data."
I have no idea what to do with iCloud. I have my old iPhone 5 and I would like to transfer my account to my iPhone 5c. I don't have an iTunes setup for either of these devices. I just recently backed up all my pictures and videos and data into iCloud on my iPhone 5c. I have two different iCloud accounts, one for my iPhone 5 and one for my iPhone 5c. If I were to sync my old device and restore the data onto my new device, will it restore ALL the data? Will it delete any data from my old device or my new device? Can i just restore the data for one app? If possible, how?
The thing is that I dont need or want any data from my old device or than the account/data from that one app onto my new iPhone 5c.
Also, my iPhone 5c has the latest iOS. But my iPhone 5 still doesn't even have iOS 7, will this affect anything? Should I update it to iOS 7.0.3?

follow instructions here.
iOS: How to back up and restore your content - Support - Apple
Under how to restore from icloud backup.

Similar Messages

Reformatting Computer's Hardrive: Need help with Backup and Restore?

Hi,
I'm getting ready to reformat my hardrive and I'm backing up all of my files. All apps will be reinstalled after the drive is formatted.
I have a ton of music that I've purchased from itunes and mp3s that I've ripped from my CDs in my main itunes folder. I will backup this folder (if necessary). Do I need to back up the licenses? If so, where are they stored? Or, what's the best and most efficient way to go about this backup and restore process? If my Ipod has all my music/videos, will it just copy all the music/videos back to my newly reformatted hardrive while maintaining the original folder structure? I assume I will have to install a fresh copy of itunes first. Also, I'm worried about the licensing for the purchased music. Is there something special I need to do with these files?
I appreciate it if someone can give me the detailed steps to go about this without issue. I'm thinking this is a pretty easy question to all the techies out there...
Thanks,
Brandon

Back up or copy the iTunes folder. There are no licenses to worry about, buy Deauthorize your computer in iTunes before you reformat. After you restore everything play one of the songs you purchased from the iTunes Store and enter your Apple ID and password to Authorize your computer.

Syncing game files with iCloud and restoring:

I was wondering if I back up my iPod touch with iCloud and restore, will I be able to continue in the games that I have on it without restarting at the beginning levels? I was going to restore it to get rid of the "Other" space being taken up. It is clear up to 2.9 GB!

Ok so I can do a complete restore and keep my place in all my games? Also, has it always been this way? Or did it only become this way when iCloud came out? When I have done a restore before iCloud was out, it did not keep my game progress and at the apple store they told me it wouldn't keep my game progress if I restored.

MOVED: [Athlon64] Need Help with X64 and Promise 20378

This topic has been moved to Operating Systems.
[Athlon64] Need Help with X64 and Promise 20378

I'm moving this the the Administration Forum. It seems more apporpiate there.

Need help with JTextArea and Scrolling

import java.awt.*;
import java.awt.event.*;
import java.text.DecimalFormat;
import javax.swing.*;
public class MORT_RETRY extends JFrame implements ActionListener
private JPanel keypad;
private JPanel buttons;
private JTextField lcdLoanAmt;
private JTextField lcdInterestRate;
private JTextField lcdTerm;
private JTextField lcdMonthlyPmt;
private JTextArea displayArea;
private JButton CalculateBtn;
private JButton ClrBtn;
private JButton CloseBtn;
private JButton Amortize;
private JScrollPane scroll;
private DecimalFormat calcPattern = new DecimalFormat("$###,###.00");
private String[] rateTerm = {"", "7years @ 5.35%", "15years @ 5.5%", "30years @ 5.75%"};
private JComboBox rateTermList;
double interest[] = {5.35, 5.5, 5.75};
int term[] = {7, 15, 30};
double balance, interestAmt, monthlyInterest, monthlyPayment, monPmtInt, monPmtPrin;
int termInMonths, month, termLoop, monthLoop;
public MORT_RETRY()
Container pane = getContentPane();
lcdLoanAmt = new JTextField();
lcdMonthlyPmt = new JTextField();
displayArea = new JTextArea();//DEFINE COMBOBOX AND SCROLL
rateTermList = new JComboBox(rateTerm);
scroll = new JScrollPane(displayArea);
scroll.setSize(600,170);
scroll.setLocation(150,270);//DEFINE BUTTONS
CalculateBtn = new JButton("Calculate");
ClrBtn = new JButton("Clear Fields");
CloseBtn = new JButton("Close");
Amortize = new JButton("Amortize");//DEFINE PANEL(S)
keypad = new JPanel();
buttons = new JPanel();//DEFINE KEYPAD PANEL LAYOUT
keypad.setLayout(new GridLayout( 4, 2, 5, 5));//SET CONTROLS ON KEYPAD PANEL
keypad.add(new JLabel("Loan Amount$ : "));
keypad.add(lcdLoanAmt);
keypad.add(new JLabel("Term of loan and Interest Rate: "));
keypad.add(rateTermList);
keypad.add(new JLabel("Monthly Payment : "));
keypad.add(lcdMonthlyPmt);
lcdMonthlyPmt.setEditable(false);
keypad.add(new JLabel("Amortize Table:"));
keypad.add(displayArea);
displayArea.setEditable(false);//DEFINE BUTTONS PANEL LAYOUT
buttons.setLayout(new GridLayout( 1, 3, 5, 5));//SET CONTROLS ON BUTTONS PANEL
buttons.add(CalculateBtn);
buttons.add(Amortize);
buttons.add(ClrBtn);
buttons.add(CloseBtn);//ADD ACTION LISTENER
CalculateBtn.addActionListener(this);
ClrBtn.addActionListener(this);
CloseBtn.addActionListener(this);
Amortize.addActionListener(this);
rateTermList.addActionListener(this);//ADD PANELS
pane.add(keypad, BorderLayout.NORTH);
pane.add(buttons, BorderLayout.SOUTH);
pane.add(scroll, BorderLayout.CENTER);
addWindowListener( new WindowAdapter()
public void windowClosing(WindowEvent e)
System.exit(0);
public void actionPerformed(ActionEvent e)
String arg = lcdLoanAmt.getText();
int combined = Integer.parseInt(arg);
if (e.getSource() == CalculateBtn)
try
JOptionPane.showMessageDialog(null, "Got try here", "Error", JOptionPane.ERROR_MESSAGE);
catch(NumberFormatException ev)
JOptionPane.showMessageDialog(null, "Got here", "Error", JOptionPane.ERROR_MESSAGE);
if ((e.getSource() == CalculateBtn) && (arg != null))
try{
if ((e.getSource() == CalculateBtn) && (rateTermList.getSelectedIndex() == 1))
monthlyInterest = interest[0] / (12 * 100);
termInMonths = term[0] * 12;
monthlyPayment = combined * (monthlyInterest / (1 - (Math.pow (1 + monthlyInterest, -termInMonths))));
lcdMonthlyPmt.setText(calcPattern.format(monthlyPayment));
if ((e.getSource() == CalculateBtn) && (rateTermList.getSelectedIndex() == 2))
monthlyInterest = interest[1] / (12 * 100);
termInMonths = term[1] * 12;
monthlyPayment = combined * (monthlyInterest / (1 - (Math.pow (1 + monthlyInterest, -termInMonths))));
lcdMonthlyPmt.setText(calcPattern.format(monthlyPayment));
if ((e.getSource() == CalculateBtn) && (rateTermList.getSelectedIndex() == 3))
monthlyInterest = interest[2] / (12 * 100);
termInMonths = term[2] * 12;
monthlyPayment = combined * (monthlyInterest / (1 - (Math.pow (1 + monthlyInterest, -termInMonths))));
lcdMonthlyPmt.setText(calcPattern.format(monthlyPayment));
catch(NumberFormatException ev)
JOptionPane.showMessageDialog(null, "Invalid Entry!\nPlease Try Again", "Error", JOptionPane.ERROR_MESSAGE);
} //IF STATEMENTS FOR AMORTIZATION
if ((e.getSource() == Amortize) && (rateTermList.getSelectedIndex() == 1))
loopy(7, 5.35);
if ((e.getSource() == Amortize) && (rateTermList.getSelectedIndex() == 2))
loopy(15, 5.5);
if ((e.getSource() == Amortize) && (rateTermList.getSelectedIndex() == 3))
loopy(30, 5.75);
if (e.getSource() == ClrBtn)
rateTermList.setSelectedIndex(0);
lcdLoanAmt.setText(null);
lcdMonthlyPmt.setText(null);
displayArea.setText(null);
if (e.getSource() == CloseBtn)
System.exit(0);
private void loopy(int lTerm,double lInterest)
double total, monthly, monthlyrate, monthint, monthprin, balance, lastint, paid;
int amount, months, termloop, monthloop;
String lcd2 = lcdLoanAmt.getText();
amount = Integer.parseInt(lcd2);
termloop = 1;
paid = 0.00;
monthlyrate = lInterest / (12 * 100);
months = lTerm * 12;
monthly = amount *(monthlyrate/(1-Math.pow(1+monthlyrate,-months)));
total = months * monthly;
balance = amount;
while (termloop <= lTerm)
displayArea.setCaretPosition(0);
displayArea.append("\n");
displayArea.append("Year " + termloop + " of " + lTerm + ": payments\n");
displayArea.append("\n");
displayArea.append("Month\tMonthly\tPrinciple\tInterest\tBalance\n");
monthloop = 1;
while (monthloop <= 12)
monthint = balance * monthlyrate;
monthprin = monthly - monthint;
balance -= monthprin;
paid += monthly;
displayArea.setCaretPosition(0);
displayArea.append(monthloop + "\t" + calcPattern.format(monthly) + "\t" + calcPattern.format(monthprin) + "\t");
displayArea.append(calcPattern.format(monthint) + "\t" + calcPattern.format(balance) + "\n");
monthloop ++;
termloop ++;
public static void main(String args[])
MORT_RETRY f = new MORT_RETRY();
f.setTitle("MORTGAGE PAYMENT CALCULATOR");
f.setBounds(600, 600, 500, 500);
f.setLocationRelativeTo(null);
f.setVisible(true);
}need help with displaying the textarea correctly and the scroll bar please.
Message was edited by:
new2this2020

What's the problem you're having ???
PS.

Can anyone help with icloud and apple accounts getting mixed up on 2 phones?

Basically husband upgraded from 4s to 5c. Gave dad 4s. I tried to set his dad up with icloud and apple id but didn't realise husbands old sim card was in 4s. Now neither phone works and husband very annoyed his apple id and password don't work anymore. Please help!!!

Hi Chris
So husband got new phone. Was all set up and up and running when we left the shop
Gave dad the old phone. It was locked to Vodafone so we had to ask them to unlock. He then got his three sim cut down to fit.
Weeks after husband had his 5c we went to dads to set his 4s up. I upgraded it to latest software iOS something. Anyway didn't realise it was husbands old sim still in phone.
After upgrade it asked me to set up apple account (I think) could have been icloud. Anyway I started setting it up with dads email and password choice. Husband then saw message on his 5c saying his dads email was being added to something on his phone.
At this point I left alone but now when husband tries to use his apple id for apps etc it says invalid user id or password. It's as though the 2 have got mixed up. Bit it won't let him reset his password?
Does this make sense?

Need help with trim and null function

Hi all,
I need help with a query. I use the trim function to get the first three characters of a string. How do I write my query so if a null value occurs in combination with my trim to say 'Null' in my results?
Thanks

Hi,
Thanks for the reply. What am I doing wrong?
SELECT trim(SUBSTR(AL1.user_data_text,1,3)),NVL
(AL1.user_data_text,'XX')
FROM Table
I want the XX to appear in the same column as the
trim.The main thing you're doing wrong is not formatting your code. The solution may become obvious if you do.
What you're saying is:
SELECT trim ( SUBSTR (AL1.user_data_text, 1, 3))
,       NVL ( AL1.user_data_text, 'XX' )
FROM    Tablewhich makes it clear that you're SELECTing two columns, when you only want to have one.
If you want that column to be exactly like the first column you're currently SELECTing, except that when that column is NULL you want it to be 'XX', then you have to apply NVL to that column, like this:
SELECT NVL ( trim ( SUBSTR (AL1.user_data_text, 1, 3))
            , 'XX'
FROM    Table

Need help with INSERT and WITH clause

I wrote sql statement which correctly work, but how i use this statment with INSERT query? NEED HELP. when i wrote insert i see error "ORA 32034: unsupported use of with clause"
with t1 as(
select a.budat,a.monat as period,b.vtweg,
c.gjahr,c.buzei,c.shkzg,c.hkont, c.prctr,
c.wrbtr,
c.matnr,
c.menge,
a.monat,
c.zuonr
from ldw_v1.BKPF a,ldw_v1.vbrk b, ldw_v1.bseg c
where a.AWTYP='VBRK' and a.BLART='RV' and a.BUKRS='8431' and a.awkey=b.vbeln
and a.bukrs=c.bukrs and a.belnr=c.belnr and a.gjahr=c.gjahr and c.koart='D'
and c.ktosl is null and c.gsber='4466' and a.gjahr>='2011' and b.vtweg='01'
,t2 as(
select a.BUKRS,a.BELNR, a.GJAHR,t1.vtweg,t1.budat,t1.monat from t1, ldw_v1.bkpf a
where t1.zuonr=a.xblnr and a.blart='WL' and bukrs='8431'
,tcogs as (
select t2.budat,t2.monat,t2.vtweg, bseg.gjahr,bseg.hkont,bseg.prctr,
sum(bseg.wrbtr) as COGS,bseg.matnr,bseg.kunnr,sum(bseg.menge) as QUANTITY
from t2, ldw_v1.bseg
where t2.bukrs=bseg.bukrs and t2.belnr=bseg.BELNR and t2.gjahr=bseg.gjahr and BSEG.KOART='S'
group by t2.budat,t2.monat,t2.vtweg, bseg.gjahr,bseg.hkont,bseg.prctr,
bseg.matnr,bseg.kunnr
,t3 as
select a.budat,a.monat,b.vtweg,
c.gjahr,c.buzei,c.shkzg,c.hkont, c.prctr,
case when c.shkzg='S' then c.wrbtr*(-1)
else c.wrbtr end as NTS,
c.matnr,c.kunnr,
c.menge*(-1) as Quantity
from ldw_v1.BKPF a,ldw_v1.vbrk b, ldw_v1.bseg c
where a.AWTYP='VBRK' and a.BLART='RV' and a.BUKRS='8431' and a.awkey=b.vbeln
and a.bukrs=c.bukrs and a.belnr=c.belnr and a.gjahr=c.gjahr and c.koart='S'
and c.ktosl is null and c.gsber='4466' and a.gjahr>='2011' and b.vtweg='01'
,trevenue as (
select t3.budat,t3.monat,t3.vtweg, t3.gjahr,t3.hkont,t3.prctr,
sum(t3.NTS) as NTS,t3.matnr,t3.kunnr,sum(t3.QUANTITY) as QUANTITY
from t3
group by t3.budat,t3.monat,t3.vtweg, t3.gjahr,t3.hkont,t3.prctr,t3.matnr,t3.kunnr
select NVL(tr.budat,tc.budat) as budat,
NVL(tr.monat,tc.monat) as monat,
NVL(tr.vtweg,tc.vtweg) as vtweg,
NVL(tr.gjahr, tc.gjahr) as gjahr,
tr.hkont as NTS_hkont,
tc.hkont as COGS_hkont,
NVL(tr.prctr,tc.prctr) as prctr,
NVL(tr.MATNR, tc.MATNR) as matnr,
NVL(tr.kunnr, tc.kunnr) as kunnr,
NVL(tr.Quantity, tc.Quantity) as Quantity,
tr.NTS as NTS,
tc.COGS as COGS
from trevenue TR full outer join tcogs TC
on TR.BUDAT=TC.BUDAT and TR.MONAT=TC.MONAT and TR.GJAHR=TC.GJAHR
and TR.MATNR=TC.MATNR and TR.KUNNR=TC.KUNNR and TR.QUANTITY=TC.QUANTITY
and TR.VTWEG=TC.VTWEG and TR.PRCTR=TC.PRCTR
Edited by: user13566113 on 25.03.2011 5:26

Without seeing what you tried it is hard to say what you did wrong, but this is how it would work
SQL> create table t ( n number );
Table created.
SQL> insert into t
2 with test_data as
3    (select 1 x from dual union all
4     select 2 x from dual union all
5     select 3 x from dual union all
6     select 4 x from dual)
7 select x from test_data;
4 rows created.
SQL>

Noob needs help with Logic and Motu live setup.

Hello everyone,
I'm a noob / semi noob who could use some help with a live setup using 2 MOTU 896HD's and Logic on a Mac.
Here's the scenario:
I teach an outdoor marching percussion section (a drumline and a front ensemble of marimbas and vibes). We have an amazing setup of live sound to amplify and enhance the mallet percussion. There is a yamaha PA system with 2 subs and 2 mains which are routed through a rack unit that processes the overall PA balance. I'm pretty sure that the unit is supposed to avoid feedback and do an overall cross-over EQ of the sound. Other then that unit, we have 2 motu896hd units which are routed via fire-wire. I also have a coax cable routing the output of the secondary box to the input of the primary box (digital i/o which converts to ADAT in (i think?)..?
Here's the confusion:
There are more then 8 inputs being used from the ensemble itself, so I need the 16 available inputs to be available in Logic. I was lead to believe that the 2nd motu unit would have to be sent digitally to the 1st motu unit via coax digital i/o. Once in Logic, however, I cannot find the signal or any input at all past the 8th input (of the 1st unit).
Here's the goal:
All of my performers and inputs routed via firewire into a Mac Mini running OSX and Logic pro.
I want to be able to use MainStage and run different patches of effects / virt. instruments for a midi controller keyboard / etc.
I want to be able to EQ and balance the ensemble via Logic.
Here's another question:
How much latency will I be dealing with? Would a mac mini with 4gb of ram be able to handle this load? With percussion, I obviously want the sound as latency free as possible. I also, however, want the flexibility of sound enhancement / modification that comes with Logic and the motu896hd units.
Any help would be REALLY appreciated. I need the routing assistance along with some direction as to whether or not this will work for this type of application. I'm pretty certain it does, as I have spoken with some other teachers in similar venues and they have been doing similar things using mac mini's / logic / mainstage / etc.
Thanks in advance,
Chris

You'll definitely want to read the manual to make sure the 896HDs are connected together properly. ADAT is a little tricky, it's not just a matter of cabling them together. Go to motunation.com if you need more guidance on connecting multiple devices. Beyond that initial hookup, here are a couple of quick suggestions:
1. Open CueMix and see if both devices are reported there. If not, your connections aren't correct. Be sure to select 44.1kHz as your sample rate, otherwise you are reducing the number of additional channels. For instance at 88.2kHz you would get half the additional channels via ADAT.
2. You may need to create an aggregate device for the MacBook to recognize more than the first 896HD. Lots of help on this forum for how to do that. Again, first make sure you have the 896HDs connected together properly.
3. As for latency with Mainstage on the Mini, no way to know until you try it. Generally MOTU is fantastic for low latency work but Mainstage is a question mark for a lot of users right now. If the Mini can't cut the mustard, you have a great excuse to upgrade to a MacBook Pro.

Need help with backup and clean install

Need Assistance with G5
Background
I'm an inexperienced Mac user with a G5, twin 2.0 gig processors and 1.5
gig ram. The OS is v10.3.6. It is the latest OS that will not slow down
internet (Safari/Mail) applications. Anything newer has really slowed internet applications down big time.
Current Problem
I've probably messed up my hard drive by switching back and forth
(archive/install) from newer to present OS. I now have corrupted data and
while my Mac is useable, several things do not work (disk utility, printing
and possibly more). I have a mixture of new and older versions of
these applications/utilities in my OS.
Going Forward
I believe I need to wipe out my hard drive and do a clean install. I also have a Mac mini which I can use (I believe) for backup via firewire.
Backup
Is everything I need to backup in the "User" folder? My spouse and I have
separate accounts and a shared account on the same Mac, with a total of 8.5 gig of data, mostly photo's and music. We want to save that and the usual preferences and favorites/bookmarks/addresses/email, etc. It would be nice if all I had to do was drag the user folder into the target drive.
I'd appreciate any assistance. I have more questions which I'll get to later, but I need to start somewhere.
Thanks all
Mac G5

Backing up your Users folder will save everything in all the accounts on the computer including pictures, music, preferences, etc. as long as they were kept in that folder.
If you have File Vault turned on you should turn it off. The "correct" procedure for transferring to your Mac Mini is as follows:
1. Turn both computers off. Connect them together with a Firewire cable.
2. Boot the G5 into Target Disk Mode.
3. Then boot the Mac Mini normally. The G5's hard drive should be present on the Mini's Desktop.
4. Create a new folder on the Mini and name it something appropriate like G5 User Backup. Drag the Users folder on the G5 into this new folder on the Mini.
After the transfer completes you should verify that everything has been transferred and is there in the folder.
5. Drag the G5's hard drive icon from the Desktop to the Trash or CTRL-click on its icon and select Eject from the contextual menu.
6. Shutdown the G5 and remove the Firewire cable connecting the two computers.
You can now proceed to fix the G5. Because you are planning to erase the hard drive I would like to suggest you do an extended format to prep the hard drive properly for your restoration:
1. Boot from your Panther Installer Disk. After the installer loads select Disk Utility from the Installer menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process will take 30 minutes to an hour or more depending upon the drive size.
You can then quit Disk Utility and return to the installer. Now proceed to reinstall OS X. Be sure you set up your accounts with the exact same usernames and passwords as you used before.
Once you have completed your reinstallation on the G5 you can restore your Users folder from the Mac Mini.
1. Shut down both computers. Connect them with a Firewire cable.
2. Boot the G5 into Target Disk Mode.
3. Boot the Mac Mini normally. G5's hard drive should appear on the Mini's Desktop.
4. Open a Finder window on the G5's hard drive and drag the Users folder to the Trash (don't delete yet.)
5. Now copy the saved Users folder from the Mac Mini to the G5 (only the Users folder, not the folder in which you stored it.)
6. Eject the G5's hard drive from the Mini's Desktop and shut down the G5.
7. Disconnect the Firewire cable.
Now restart the G5. If all worked well it should start up normally and you should find everything normal in your accounts.
There is one potential problem in all the above. All your account preferences are contained in the Users folder. If you have any corrupted preferences, they will still be corrupted and may continue to cause problems. If that's the case you may need to trash the /Home/Library/Preferences/ folder's contents. Hopefully, this won't be the case, but you should be aware of the possibility.
If eveything is working normally you can empty the Trash and delete the contents. Same on the Mac Mini.

Need help with mac and java

Hi, I'm trying to develop an application on a Machintosh OSX 10.2.8 machine.
I'm having a herrendous time trying to get quicktime to work on it.
I've somehow managed t oget 1.3.1 and QTJava.jar to work together but now i need encryption, however that requires 1.4+
Now 1.4.1 doesnt work with quicktime
I've downloaded the latest software upgrades but Ive got no idea how to set up quicktime to work with java 1.4.1
Now to add on top of that mac reports it can use AES encryption. this is from source code ripped striaght from this website.
But first and foremost can anyone, annyonee help me out with setting up 1.4.1 with quicktime?
Thank you

If you need encryption with Java 1.3.1, download the JCE from either Sun (http://java.sun.com/products/jce/) or Bouncy Castle (http://www.bouncycastle.org/).
Cheers,
--Arnout

Desperatly need Help with itunes and ipod argument!!1

Itunes will work, slowly, until i plug pod in and then it sync's for about 10 secs and then every program running freezes. Itunes refuses to respond, cant close or open additional applications, can move external windows but they leave a ghost accross the screen.
i have done all the 5 R's to Pod, reinstalled itunes 3 times and run a virus scan twice - im at witts end, i hope someone can help. I have over 2000 songs on itunes and i cant do anything with them or my pod.
If anyone can help please either reply or contact me on: [email protected]
cheers

Hello! no, you haven't stumped the pros. This is a user board. No pros here to stump, just volunteers.
Shuffles are only designed to sync with one PC. Connect it to your PC and restore it to factory settings. Eject it. When your wife connects it to her PC, it should get recognized.

Need help with Itunes and IPod Shuffle

I have the latest updates for both Itunes and the IPod Shuffle. I have Itunes on two different PCs, one for the wife and one for myself. I got a new Nano and gave my wife the Shuffle I had and she gave her shuffle to a friend. Everything has worked just fine in the past. When she plugged in my shuffle it asked if she wanted to sync to this PCs library and she said yes. Everything went fine except that no files will copy to the shuffle. It seems to take a VERY long time to sync as well. I tried dragging a song or a playlist but it just sits in sync mode for a long time and then when it's done there is no music on the shuffle. I don't understand the problem. When I attach the shuffle to my PC it asks if I want to sync to the library and everything works, files transfer, no problem. Putting back on her PC and going through the resync business again results in the same situation. Help!

Hello! no, you haven't stumped the pros. This is a user board. No pros here to stump, just volunteers.
Shuffles are only designed to sync with one PC. Connect it to your PC and restore it to factory settings. Eject it. When your wife connects it to her PC, it should get recognized.

Day one of my new MacBook Pro & I desparately need help with calendar and email

It's day one of my new relationship with a Mac, and I need help! I'd like to use microsoft exchange to sync my calendars to iCal & my emails the way I currently do with my iPhone 4 and iPad 2. The problem is that all I get are error messages. They either say that communication with the server cannot be established or communication to ports 80 & 440 cannot be established. One account I'd an ssl and the others are gmail. Please advise!

anyone? please? i would appreciate any information.

Need help with GetStringUTFChars and JAB

Please help,
I want to use the JNI function GetStringUTFChars with JAB (Java Access Bridge), without having to call JNI_CreateJavaVM as no matter what I do, JNI_CreateJavaVM fails. I have JAB successfully loaded, and I have used GetAccesibleFromHWND to get a valid jobect. Is there any way I can go from the jobect to use GetStringUTFChars?
If not, is the source code availabe for GetStringUTFChars? OR is there an Windows/C++ equivalent available?

RPhilbrook12, you've reached the right place for information regarding how to suspend your line while you're deployed. Are you being deployed for military purposes? If you have received military orders to relocate for 90 days or more to an area where Verizon Wireless doesn’t provide coverage and you need to suspend your service, you can contact us at 800-922-0204. You will need to be prepared to provide information from your orders, including where you’ll be stationed and the name and rank of your Commanding Officer. Please be advised that your service can be suspended for up to 3 years for military deployment.
For more details regarding your options to suspend services, click http://vz.to/1lfmyUI
LasinaH_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

I need help with iCloud and restoring

Similar Messages

Maybe you are looking for