I need help with Importing my Illustrator file into After Effects, I'm having problems

Hello everyone, I'm new to this forum. I am having a hard time importing this Illustrator file into After Effects. Here's how it is in the Illustrator file
As you can see, I made all the layers separate so then when I import it I can work on each and every one. (I want them to bloom from the center)
but when I import to After Effects (I ask to import the composition and retain the layers), the size looks completely different:
Then when I drag down the layers folder to the Comp Panel, the layer order starts getting really messed up. Here is what I am talking about
What am I doing wrong and how can I fix it? Also how can I figure out how to let the petals boom? I'm thinking of scaling the center larger first and then scaling the petals from there. but first I have to figure out how to get the size distortion and the layer orders right. Thanks.

You need to open the comp not drag layers in a new comp.

Similar Messages

Can't import any .psd files into after effects.

Hello all.
I was using CS5 master collection without issue, for a year.
Decided to upgrade to the CS6 master collection and that’s when the problems began.
For example, I can’t import any .psd files into AE.
All files are saved in RGB mode.
The previous files were made on CS5.
I made a new .psd file in CS6 with just a couple of layers on it, couldn’t import that either.
I’ve tried Ctrl-alt-shift to delete preferences, that had limited success. I can import a file and do a little bit of work on it but as soon as I close the file down and opened it up again, it does not recognise the .psd file.
The errors I’m getting in AE are many
For example:
After Effects warning: Reading past end of file
After Effects error: Could not open intro.psd because it is not a valid Photoshop document
After Effects error: Crash in progress. Last logged message:<8104><dynamiclink><5>C:\ProgramFiles\Adobe\Adobe Premiere Pro CS6\Adobe Premiere Pro exe
After Effects error: Not enough memory to initialise PSL
I have un-installed and re-installed many times.
I’m using Windows 8, with 32ram. Hard drives C: 100mg, D: 2 Tb
I’ve tried installing on both drives, still the same thing happens.
Does anyone out there in Adobe Land have any ideas?
Totally confused
Cheers,
Gary.

Hi Arie,
Thanks for your response.
It actually happens with every .psd file regardless of size or specs.
All the other programs in the CS6 master collection work fine, except for AE and PS.
I tried the small file. Created a small file, 100 px by 100px 72dpi, just with a gradient background. Same thing, not enough memory to initialise PSL.
I got the adobe cleaner, and re-installed on my system (again) .... same thing.
As long as I open AE with doing ctrl-alt-shift every single time or export layers from PS individually I seem to be OK.
The problem is far from solved, so I guess i just have to put up with workarounds.
Thanks for taking the time to respond

How do you import Adobe Illustrator files to After Effects?

Hi,
I had drawn an animation file in Adobe Illustrator with 8 layers each depicting an animation/drawing.
I tried importing it to After Effects, but the drawing doesn't show up.
Anyone tell me what I am doing wrong; why the drawings are not showing up on the After Effects screen?
I made a video recording of it here:
Jae

Your drawing is black, and so is your background. Change the comp background colour, or toggle the Transparency Grid view button..

.AVI files into after effects do not work? how do I fix?

When I record with my vivitar dvr 840xhd camera, and try to import the files into after effects. The files import into after effects just fine, except the little icon of the video is all grey. But when I put it into the comp and try to view it. The whole video is only a black screen. I try to watch it and find out that the audio works in it. but not the video. Throwing it into media encoder and trying to convert it only does the same thing, just a black screen with audio. But when I play the file on windows media player it works just fine. I have After effects CS5 and I run windows 7. Anyone have any good anwsers? Perferably one that does not reqire another program video converter to put it into the file type I. I tryed that before with many other video converters. I either loose quaility. If im filming in 60fps, it is reduced to 30fps. I can only convert so much in one clip. And most leave watermarks. I would much rather be able to import these .avi files into after effects without the wait and annoyance of a 3rd party program. Thanks for the help.

Anyone have any good anwsers? Perferably one that does not reqire another program video converter to put it into the file type
Probably not. AVI is just a generic container format and without any more info we will not be able to give you any proper answers. Even their website doesn't give any specifics. Use GSpot or MediaInfo to find out what CoDecs it is using exactly. Since the camera is based on Flash memory, though, I already get this ugly feeling it is using some atrocious non-standard MPEG4 derivative nad that would mean there is no chance at all to use it directly in AE...
Mylenium

I had to put my computer by together without migration or time machine I NEED help with order of the files?

I had to put my computer by together without migration or time machine I NEED help with order of the files?

Hi, where are these other files exactly?

A problem with importing layered PSD file into Flash

Hi.
There's a problem with importing layered PSD file into Flash.
If I import a layered PSD file, some part the color of the lower layer is shown at the edge of objects or shadows. Instead, if I crop each layers first and import them, there's no problem.
If the higher layer has brush or transparent effects, it becomes worse.
Any help with this problem?
Thanks.

How was the original art created? Was the original RGB or CMYK? What is the resolution of the Photoshop file? Flash only works well with RGB and 72 pixel per inch resolution. If your original art is not set this way, then Flash will attempt to convert it as it imports it. Flash uses the sRGB color space. You'll get the best color translation if your Photoshop file is using this color preference.

Importing adobe illustrator files into powerpoint. (Vector)

How can I import vector Illustrator files into Powerpoint, so I can edit them later. I have tried PDF (won't work), WMF text breacks up and scaling makes the text crap!
EPS looks rubbish.
Any ideas?
Thanks

jenhen1 wrote:
I need the graphic to be able to sit in Power point, look great quality and be completely able to be edited in Power point, Text included. It all needs to be vector. And no text breaking up and able to change colours and fonts and scalable etc.
Need to edit the graphic colour and change update text.
Then you can't build it in Illustrator; at least not all of it.*
...or create in Power point...
.That's your answer. Ultimately, Powerpoint-editable = Powerpoint native.
...which is very limited!
Are you just assuming that, or have you actually tried to do something and found it impossible? Plenty of drawing can be done in Powerpoint, and text is text. What exactly are you trying to do?
*If you are running Windows, there are ways to get straight Illustrator vectors (no live effects, blends, meshes, etc.) onto a Powerpoint slide using Paste Special. Forget text though, seeing as you need it live and editable in Powerpoint...you'll have no choice but to set it in Powerpoint.

I need help with a second hand iphone i purchased recently,i am having issues setting it up as it has is requesting for the icloud account that was used by the previous user

i need help with a second hand iphone i purchased recently,i am having issues setting it up as it has is requesting for the icloud account that was used by the previous user

Sorry.
The iPhone is of no use until/unless the previous owner removes it from their account.
You will need to find the prior owner or return the iPhone.

Sizing PSDS for After Effects / Preparing Illustrator files for After Effects

3 questions
For the longest time I have been told when importing PSDs to
After effects, in order to keep circles circles (proper ratios) I had
to make a 720 540 PSD file and then crunch it down to 720 486. Then import the file to a D1 NTSC 720 486 after effects comp and everything works fine.And it does and always has
I have now been told otherwise. People claim they view in DV NTSC view
in Photoshop at 720 486 and then just import to a 720 486 DV1 After
Effects comp and everything is fine.
That view mode in Photoshop is for viewing purposes only though so this
confuses me. Sure you can sit there and stretch your picture to look
right in that mode but that doesn't make sense. Going 540 to 486 is
quicker.
But one weird thing I noticed is if you save your PSD with the NTSC
view mode turned on it will automatically import to After Effects with
DV NTSC comp settings. Otherwise it will import into a Square Pixels
comp.
So to simplify my questions are the following.
1. Is there a way to avoid creating a 720 540 PSD and then crunching
down to 486? And somehow keep circles circles and photographs not
stretched.
2. Why does the DV viewing mode in Photoshop effect the importing into
After Effects if it's just for preview purposes?
That said I like that viewing mode in Photoshop because when I do my
720 540 to 720 486 crunch I can see that everything will look fine.
If anyone can help it would be much appreciated. I've been fine doing what I'm doing but for the last couple years I have been told there's a quicker way and haven't found anyone who knows.
And my final question #3 is
How do you import an illustrattor file into After Effectcs with
layers? I know how to bring sa photoshop file in with layers but everytime I import an illustrator file in , it comes in flat as one layer.
Thanks very much to those who can help.
J.

>Is there a way to avoid creating a 720 540 PSD and then crunching
>down to 486? And somehow keep circles circles and photographs not
>stretched.
Not really and then "crunching down" is very much a matter of point of view. The real question is: Can you accept the variations e.g. in antialiasing introduced by creating your work with non-square pixels in Photoshop. Apparently doing so will affect horizontal sampling more than vertical and as there is a difference in how AE and PS deal with these matters, the result would be different. It also extends to the matter of how practical it would be to work with such files if you need to move them to applications that don't provide PAR correction...
>Why does the DV viewing mode in Photoshop effect the importing into
>After Effects if it's just for preview purposes?
It doesn't. The people told you only half the facts. Photoshop's PAR correction is just for viewing purposes, that's true, but it does not mean that PS itself would be unable to deal with non-square pixels. Whenever you create a files based on such presets, PS will correctly embed that information for saving, hence programs like AE that are able to extract that information, will use it to correctly interpret items.
>How do you import an illustrattor file into After Effectcs with
>layers?
You can't. In the strict sense Illustrator has no layers, only objects and groups and since they can be infinitely combined in the funniest ways, it's a hell of a thing to read them right. Maybe in CS5 after all these years... (or even later).
Mylenium

Is it possible to scale Illustrator files inside After Effects and retain the vector quality?

I imported an Illustrator file into my After Effects project and scaled the ai file to 200%, but noticed that is pixelated. Is there a way to keep the ai file vector based inside After Effects.
Note: I attempted to use the "Create Shapes from Vector Layer" and the paths all show up, but the fill and stroke colors disappear??
Any suggestions would be appreciated.
I am using CS6 Creative Cloud on a Windows 8 with 16 gig of ram
Thanks,
Paul

Dave is right. See this:
FAQ: Why are my vector graphics (e.g., from Illustrator) jagged or soft?

Bridge not importing files into After Effects

From AE I go to File > Browse in Bridge...
Bridge opens up and I find the file I want. If I double click the file, an AI for instance, it opens the file within Illustrator. I could find, double click it, and it opens in Photoshop.
I feel as though I'm missing how to import files into After Effects by using bridge.
I'm running CC 2014 on a Win 7 machine.

Probably an issue with whatever created the files in the first place. WMV doesn't have Alpha, but can have multiple streams... anyway, AE is crap at dealing with such stuff, so convert it using an external tool like Handbrake or whatever...
Mylenium

Importing an Illustrator CS6 in After Effects CS6

When I import the file into After Effects CS6 I only see a black scree and you can move the squares. What am I doing wrong?
Thanks,
Joe.

The top pic. is a Ai file.
Well here is what I do in Ai I have a white background create a few squares and a text, all in different colors. I am not using black. I same the file and then import it in After Effects and choose to keep layers. And I all I get is a black square with non of the graphics that I created.
Thanks,
Joe

How do I import a Premiere Pro file into After Effects

So I'm an editor, I cut trailers and TV spots. I enjoy making my title cards on After Effects because it gives me a lot of options but I'm having difficulty. How do I import / edit a Premiere Pro file into After Effects? I imported the project file but the whole thing was a mess and nothing made sense. Can anyone explain this process to me?
By the way I used CS5.5 versions of the software.

It actually works better if you go the other way... link an AE comp into your Premiere project.
Create and link to After Effects compositions with Dynamic Link

Exporting edited PE9 files into After Effects?

Is it possible to import edited Premiere Elements 9 files into After Effects to apply effects?
Thanks in advance

Steve,
I respectfully disagree on this point.
You can put an uncompressed AVI into Premiere Elements and output an uncompressed AVI from Premiere Elements -- but the video is compressed a DV while it's in the program so there's no way to avoid the issue of compression
If one starts with DV-AVI, there is slight lossy compression, but PrE is natively editing that DV-AVI footage. Now, if one Exports/Shares to DV-AVI, again there is a slight lossy compression, but if they Export/Share to Lagarith, or UT, there is no loss, though there is compression. AE can work with the lossless material fine, so no need for it to re-compress, and no need to introduce loss. When one Exports from AE (no ADL - Adobe Dynamic Link between AE & PrE), again with a lossless CODEC, that IS turned into DV-AVI, when back in PrE, but two levels of lossy compression have been eliminated from the workflow, and eliminating any compression that is lossy is my goal for ultimate quality.
The beauty of Lagarith, or UT, is that the files are much smaller, than with AVI Uncompressed, so other than the encoding porttion of the workflow (both CODEC's are quite fast), the resources needed are greatly reduced.
An extreme example of the use of compressed material is where one produces a DVD (MPEG-2 CODEC, which IS highly-compressed), and then uses that compressed material in a new Project, outputting again to MPEG-2 for a DVD. If one can go to the material, before the first MPEG-2 Encoding, thus saving one level of compression, the qualtiy is much better. Again, this is an extreme example, and the DV/DVC CODEC in a DV-AVI is no where nearly so bad, as with MPEG-2.
Are the extra steps worth the effort? Only the user can determine that.
Just my observations, when creating and editing intermediate files. For me, the advantage outweighs the encoding time, as quality is as high, as I can obtain.
Hunt

Problems importing iPhone 4 video into After Effects CS5 - Audio sync out

Hi there,
I am currently experiencing problems trying to import iPhone 4 video into After Effects CS5.
Firstly i'd like to note that the video plays perfectly fine on the iPhone, VLC and in Quicktime Player. The audio and video is in sync.
When I add the footage to After Effects the video becomes slightly out of sync with the audio. I have noticed this in RAM preview and also in renders I did just to test.
I also want to note that, both my iPhone and After Effects have latest software updates.
Thanks for your help

Thanks Rick and Mylenium
Thanks that worked!
I thought that changing the frame rate in the composition settings would have worked.
Instead what I should have done is to go the the footage in the Project Panel then right-click on the footage > Interpret Footage > Main... then Conform to frame rate: Frame rate: 23.986607 (or whatever more accurate frame rate your footage actually is)
I used the more accurate frame rate reading from VLC which went to 5 decimal places. I got that info from the top menu in Tools > Codec Information
Its a shame AE doesn't pick up on the more accurate fps. It seems that all the videos from my iPhone 4 have slightly different frame rates and I guess I will have to interpret each clip properly.
I hear that the frame rate on the iPhone 4 is different depending on the lighting? I wonder why that would be the case?
Hope this helps anybody else that might face this problem.
Cheers

I need help with Importing my Illustrator file into After Effects, I'm having problems

Similar Messages

Maybe you are looking for