I need help with installing flashplayer

when i download the flashplayer installer, i get a box that says " The program can't start because MSVCR110.dll is missing from your computer. Try reinstalling the program to fix this problem."
I have of course done some searching on google first, but found nothing related to adobe flash player.
Any help would be most appreciated.

I have this same issue, I have re-installed the latest version of C++ and also checked my system32 folder. MSVCR110.dll is in there as it should be. i have installed flash before. its just this latest update is giving me the MSVCR110.dl is missing  error. Any ideas why? Im using windows 7 ultimate 64 bit

Similar Messages

  • Installing Elements 11 on Mac. Need help with install error "Setup wants to make changes."

    Installing Elements 11 on Mac 10.8.2. Need help with install error:  Setup wants to make changes. Type your password to allow this."  After entering Adobe password, nothing happens.  Locked from further installation.  Any ideas?  Adobe phone support could not help.

    Just before letting changes (installation in this case) be made on the system, Mac OS prompts for password & this has to be the Mac system password. This password prompt is the system's own native prompt & would accept the system password only. Please make sure it is the right system password (all/admin rights) and the installaion should run.

  • Need help with installing on Photosmart C7280 all-in-one

    I did have my printer installed, and was using the printer for 3 laptops wireless within my home.  Now I can not even find my Backup disk, so i need help with downloading the software to use my printer, and also get it back to being used wireless.   I do not know what happened, but the fax for this printer is listed, just not the printer itself.   please help!
    This question was solved.
    View Solution.

    Click here to download the software for your printer:
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=3204785&lc=en&cc=us&dlc=en&lang=en&cc=us
    chose the appropriate operating system that corresponds to your computer and download the full feature software.
    Please click on KUDOS if you find my solution helpful.

  • Need help with Installing Canon LBP 2900B on Macbook Pro OSX 10.6.8

    I know this is going to sound silly, but really need help with this, URGENTLY!!!
    Bought a Canon LBP2900B printer more than a year ago, and was using it on my MacBook Pro with OSX Snow Leopard (10.6.8) very well. My hard disk recently crashed and now I cannot reinstall the printer, nor can I find the driver for it anywhere for the Mac.
    Have searched all the forums and followed all discussion threads on the Apple Communities as well, but none of the solutions seem to work. Even went back to @Dexter's solution with trying to download the file from the link http://boolet.free.fr/CAPT.zip (this is what I had done when I bought the printer, and it worked perfectly) but the link doesn't exist anymore.
    Extremely grateful if anyone can put up a solution to this, or alternatively, IF ANYONE HAS THE OLD CAPT.ZIP FILE AND CAN UPLOAD IT.
    Thanks in advance. Look forward to your solutions.
    Cheers

    Depends on how the partitons are arranged. If they're exactly as quoted, then yes.
    Open Disk Utility and select the partition tab.
    In the diagram, the top partition needs to be the one you're booted from, and partition 2 the middle one.
    Select Partiton 2 so that it's highlighted, and click the '-' button below the diagram.
    Drag the bottom right corner of partition 1 down to meet partition 3.

  • Need help with installing Yahoo style flash menu CS5

    I downloaded the Yahoo style menu bar from the the available widgets.  I got the menu bar to show in Dreamweaver, but need help:
    I have trouble understanding how to use the f-source  flash editor to edit the links.
    I don't seem to be able to drop the  f-source.com button from the menu bar.
    The bar  shows up as a tiny bar in IE8, not as I had programmed it in the widget programmer.
    I was instructed to Insert ==> f-source menus ==> Edit menu in Dreamweaver.  Doing this leads to the following message: "Install at least one f-source menu'.  I did install the f-source-UI G file in the Adobe Extension Manager CS5.  What else needs to be installed?  
    My OS is Windows7 and I am working with Dreamweaver CS5.  Please help.
    Thanks,
    Tony Uythoven

    Flash menus (Flash navigation, period) is a terrible thing from a functional standpoint. It looks really nice, but the honeymoon ends there. As far as SEO goes, your entire site, beyond the landing page, is invisible. A search robot will only see an embeded Flash object.
    You have to ask yourself a basic question.
    1. What is the purpose of building a website and putting it online?
    If it's for your own personal enjoyment and nothing more, then a Flash menu may be for you. If it's for a business or band, or a political group or social group, and you want people to be able to find it in Google, Yahoo, Bing, etc. then you want as many indexible links as possible on your landing page so they will show up in related searches like schedules, articles, galleries, etc.

  • Need Help with Installing AP 1250

    I am installing AP 1250 with wireless client authenticating to radius server running on MS ISA server.   The users are supposed to be authenticating with AD.  So far I have been running into problems and unable to get any user connected via Wireless LAN. 
    I would like your feedback if the configuration is good on the AP. Do I need tweak it to work?   The plan is to install one and then install the rest of the 3 more APs in the infrastructure.   I would like to get the one up and running first.  
    I would like any suggestion to enhance my configuration and design guidance.   Also need help for ISA configuration.
    Config from AP
        hostname cisco1-ap
        aaa new-model
        aaa group server radius rad_eap
         server 10.1.2.25 auth-port 1812 acct-port 1813
        aaa group server radius rad_acct
         server 10.1.2.25 auth-port 1812 acct-port 1813
        aaa group server radius rad_admin
        aaa group server tacacs+ tac_admin
        aaa group server radius rad_pmip
        aaa group server radius dummy
        aaa group server radius rad_mac
        aaa authentication login default local
        aaa authentication login eap_methods group rad_eap
        aaa authentication login mac_methods local
        aaa authorization exec default local
        aaa accounting network acct_methods start-stop group rad_acct
        dot11 ssid ABCD123
         authentication open eap eap_methods
         authentication network-eap eap_methods
         authentication key-management wpa
         guest-mode
         infrastructure-ssid optional
        power inline negotiation injector installed
        bridge irb
        interface Dot11Radio0
         no ip address
         no ip route-cache
         encryption mode ciphers tkip
         ssid ABCD123
         station-role root
         rts threshold 2312
         no dot11 extension aironet
         bridge-group 1
        bridge-group 1 subscriber-loop-control
         bridge-group 1 block-unknown-source
         no bridge-group 1 source-learning
         no bridge-group 1 unicast-flooding
         bridge-group 1 spanning-disabled
        interface Dot11Radio1
        shutdown
        interface FastEthernet0
         no ip address
         no ip route-cache
         speed 100
         full-duplex
         bridge-group 1
         no bridge-group 1 source-learning
         bridge-group 1 spanning-disabled
        ip http server
        ip http authentication aaa
        no ip http secure-server
        ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
        ip radius source-interface BVI1
        radius-server attribute 32 include-in-access-req format %h
        radius-server host 10.1.2.25 auth-port 1812 acct-port 1813 key 0 XXX-XXX-XXX-X
        radius-server deadtime 5
        radius-server vsa send accounting
        radius-server vsa send authentication
        bridge 1 route ip
        line con 0
        line vty 0 4

    It is IAS and not ISA server.  I apologies for the confusion it might have caused you. 

  • Need help with installing drivers

    I recently installed Windows 7 Professional and have been having trouble with installing the drivers necessary for sound, USB, graphics, etc. I have the Windows drivers on an external drive, but the OS won't recognize an external drive because it needs the drivers to do so. My Macbook came with OS X 10.6 installed, but I have since upgraded to 10.7 through the App Store. I believe I can use my 10.6 factory DVD to install drivers on the Windows side, but if I have 10.7 installed, will it work right? I'm confused

    IME driver is one of the very most important. TPM is only needed if you plan on using it. If you don't know what it is, then probably don't need it.
    Quote
    Please tell me in detail what drivers do what functions and which ones need to install ?
    Most of them are pretty self explanatory. Unless you set the SATA controller to AHCI mode when the OS was installed, RST isn't going to do much.
    Like Henry said. Everything is on the install disc that came with the mainboard you need, including the ones you don't need. It's even got a 'total install' selection. 

  • Need help with installing old version of firmware

    I would like to revert to an old version of firmware for my Airport Extreme base station. I have read in a number of postings that this would possibly help with the problem of my Canon Pixma ip3000 not working after the firmware was usdated. When I tried to install the old firmware, the Installer would not allow it, there was just a message that the software was up to date. Could anyone please give a step by step description of how this can be done? Is there a way around the Installer? Thanks.

    The firmware supplied with the base station was 4.1. After installing it, everything worked just fine, including wireless printing to a Canon Pixma ip3000. At one point, after being prompted by a message onscreen to upgrade to 4.2, I did the download and installation, and that is when all the problems started. No wireless printing, and I can't seem to use the Airport Admin or Assistant (not responding). Since then I have also upgraded the OS to 10.4.5.
    I am trying to downgrade to 4.1 since that is what worked initially and what was suggested in another posting I read.
    I did look at the information for the various parts of Airport and noticed that the Setup Asistant is 4.2, the Admin Utility is 4.2 and the base station is 5.5.1. Could this be affecting the problem as well?
    I will try downgrading using the link you provided. Thanks very much.

  • Need help with installing app.

    I need help installing .jar file on my Droid phone.

    Oh, man, the last time I heard of a .JAR file was on a Motorola Razr!
    That ain't goin' on a Droid....
    Unless you have some more context to share about this.....
    Geri O

  • Need help with Installing Flash 9

    First off, let me apologize if this is in the wrong forum, I couldn't really find a forum for my specific need.
    I was running Flash 8 just fine, but then a video requested that I update to Flash 9, because that's the only way the video would play.
    So I tried installing the PPC version, and right at the last file it needs to finish installing a window pops up saying "ERROR CREATING FILE, 1008:5,-5000 Access denied error."
    Now all flash files won't work on my browser.

    Did you enable "root user" according to "Mac Help" or did you set up a new user in the system preferences? If you did it according to Mac Help, then Flash should have been installed correctly. Did you try the other option first? That option, if it worked, would have installed Flash into the current user. How many different users do you have?
    Post back if you still need help, maybe someone else will pick up on this that is better than I am about such problems.
    Sorry that I haven't been much help.
    Larry

  • Need Help with install of Final Cut Pro HD

    Hi
    I am tryting to install FCP Express HD on my G4 Ibook and I get a strange error message. It was able to instaLL fine but when I got to run the program I get this message
    Can't install unable to find easy setup file please reinstall and try again.
    I have uninstalled and resinstalled 2x any ideas
    Ibook g4   Mac OS X (10.4.3)  

    Make sure you uninstall all the components of Final Cut. Do a search on your Finder. Then install from the installation disc. If this doesn't work you should contact Apple for help with installation issues. The disc may be defective.

  • Help with installing Flashplayer with Ffox 2 & Mandrake 10.0

    I am trying to get my Linux (MythTV) box (running Mandrake V10.0) to view the following site: http://www.abc.net.au/iview/
    It requires Adobe Flashplayer V10, and the ability to run Java scripts.
    I have installed Firefox V2.0.0.20 (since V3 will not install due to needed libraries etc.) in /usr/lib/firefox.
    I cannot seem to successfully install the Flashplayer V10 plugin, despite the .so being present in /usr/lib/firefox/plugins.
    Please, could someone help me with this?
    Regards,
    Il-uvatar
    (WARNING - Linux newbie at the controls)

    Ohluckyme:
    I suspect that by a PowerPC G4 450 MHz you mean a PowerMac G4 450 MHz. This would be either the AGP Graphics or Gigabit Ethernet. Whichever it is, it will support OS 9 up to Tiger (10.4.11), but it does not meet the technical specifications for Leopard. However, both these have very small Hard Disk Drives on the low end, so if you have the 10 GB HDD, I would recommend replacing it before installing OS X, which needs a minimus of 5 GB free space on HDDs 40 GB or less, and 15% on HDDs larger than 40 GB.
    I suggest that you consider either Panther (10.3.9) or Tiger (10.4.11) along with OS 9. I further suggest that you backup your data, then completely reformat and erase the HDD before installation. (Post back for step by step directions for reformat and installation). You will need the Full Retail Version of either Panther or Tiger.
    Please do post back with further questions or comments.
    Cheers
    cornelius

  • Need HELP with installing snow leopard!!

    I am trying to install snow leopard on my one year old iMac. Install is successful. Restate works. But then I get the spinning wheel with a blank screen. No dock...no hard drive icon...nothing. I reminded from the disc twice and still the same thing. Help!!! Need suggestions.

    Before you go off and buy anything I suspect your machine came with Leopard on it (V10.5.x) and you bought your machine during the transition time where Snow Leopard (10.6.x) just came out and Apple was giving upgrades to customers buying during the transition. If that is the case your machine should work fine with the 10.6.x disc you were provided. You should have received a 10.5.x and 10.6.x disc if that is the case, you can easily tell by looking at the media.
    Click on the Apple symbol in the upper left of your screen and see what version of OS X is loaded on your system. If it's 10.5.x then you know you're on Leopard. If you want to upgrade to Snow Leopard there are some things every user should do prior to upgrading. First is BACKUP your system either using Time Machine or create a clone using SuperDuper or Carbon Copy Cloner. A backup is the #1 priority.
    Next then you can simply pop the Snow Leopard 10.6.x disc in your computer and follow the on-screen instructions. If for some reason it doesn't work then contact Apple.

  • Need help with installing Symbol so student can graduate

    After using OS X exclusively for the last 5 years, I now find that I need to use Framemaker on OS 9 in order to help a student of mine finish his thesis. I've installed Framemaker, but when I try to run it, it says it's missing the Symbol font, then quits. I have no idea why it's missing, and for the life of me, I can't remember how to install a font in OS 9.
    Can anyone tell me where I can find an OS 9 compatible version of the Symbol font, and how to install it?

    Hi, Gary, and welcome to Apple Discussions. Symbol is a standard font that's normally installed with OS 9. Many people don't use it, so it is often trashed. If you don't have access to a computer that is running OS 9 and has the font installed on it, you can extract a copy from the Installer Tome on any OS 9 installer CD using TomeViewer. Once you've done so, place it in the Fonts folder inside OS 9's System Folder, restart the Mac, and it should be available in the Fonts menu of all your OS 9 applications.

  • I need help with installing the flash player!

    I am trying to install the flash player and as the download progresses it asks me to close internet explorer to continue.  I close internet explorer and press the continue button and it repeats the request to close internet explorer.  I have completely closed out of everything except the installing process and it still won't continue the download, it wants me to close out of internet explorer and I have already done that!  Can anyone help me with this???  I am so frustrated.  I am not an advanced computer user, but I have followed all the instructions for this procedure and end up with the same result... close internet explorer.  I would appreciate assistance so much!

    You need to close all iexplore.exe instances; use the Task Manager's Processes tab.

Maybe you are looking for