I need help with Lightning using Exchange and Postbox

Hello,
I have Postbox for Mac v 3.0.11 and I would like to use Lightning for Exchange.
I cannot find any support for v 3.0.11.
Can anyone help?
Regards
SD

Did you see Coq Rouge's reply in your original thread? Which thread are you going to continue?

Similar Messages

Need help with problem using sound and vibration examples. question repost

I am generating a wav file using the sound and vibration example vi "SVXMPL_Wav Recorder(DAQmx)" using a ni 7422 board. Then, using the example vi SVXMPL_Getting started with SVT(Simulated)" attempting to play back that file. the wav file will load and play back on the graphs fine but when I click the "Play Wav File" which sends the audio to the computers speaker, I get the error "Cannot recognise sound Format". It plays the shipped example files fine. I can also play the wav files I generate on a Windows audio player. Don't know a lot about the sound and vibration toolkit or wav file formats but need to get these two to work together. Using LV 8.5 and sound and vibration toolkit 4.0. This is a bit of a repost of the same question ask last week but not answered. Thanks

Did you see Coq Rouge's reply in your original thread? Which thread are you going to continue?

Need help with my iPhone 5 and my Macbook Pro.

Need help with my iPhone 5 and my Macbook Pro. I was purchased some music on itunes at my mac. Some reason I deleted those music from both on Mac and iPhone 5. Today, I went to my iPhone iTunes store inside of iCloud to redownload my puchased. But those song won't able to sync back to my iTunes library on my Mac. Can anyone help me with that ??....
iPhone 5, iOS 6.0.1

You've posted to the iTunes Match forum, which your question does not appear to be related to. You'll get better support responses by posting to either the iTunes for Mac or iTunes for Windows forum. Which ever is more appropriate for your situation.

Need help with clickbios ii terminolgy and values. Z77A-GD65 / 3770k

Hello All
I recently purchased a Z77A-GD65 board and after searching I've found the differences in terminology between this and my previous Asus board but still have a couple of settings I cant find any info on.
System Specs:
motherboard: msi z77a-gd65
cpu: intel 3770k
ram: corsair vengeance 2133mhz 1.5v
psu: corsair 850w
First things first is I believe I am running in turbo oc mode. I've selected the oc genie tab on the center right of the bios screen and proceeded to change settings there. With cpu voltage on auto and vdroop set to 50% at 4.6ghz. (I'll try and get screenshots of bios settings soon)
The following are the terms I need help with:
In the my oc genie section;
1. Long duration power limit
2. Long duration maintained
3. Short duration power limit
In the main overclocking section;
4. Digital Compensation level (not in owners manual, options auto/high)
5. Cpu core ocp expander (enabled for overclock 4.5ghz+?)
In the CPU Features section;
6. long duration power limit w (does "w" stand for watts?)
7. long duration maintained s (does "s" stand for seconds?)
8. short duration power limit
9. primary plane current limit a (does "a" stand for amps?)
10. secondary plane current limit
11. primary plane turbo power limit
12. secondary plane turbo power
I know those are a lot of settings, but would appreciate any simple definitions as to what they do and recommended values for mild overclocking (4.5-4.80)
Also on my previous board (Asus P8P67 Pro) my 3770k was stable in prime95 for 18 hrs at 4.5ghz fixed 1.155v with only ram timings put in manually and LLC set to extreme.(or whatever max is called in asus bios) Voltage was fixed and everything else was defailts.

Well I'm back. Been digging around for a few days and found some answers to my questions.
First things first s that for some reason I could not adjust voltage values with the + or - symbols. Clearing cmos did not help this. I had to reflash the bios to get this functionality back as well as clearing cmos before and after the flash.
So I figured out the values in the oc genie section are the same as the normal section but only used when your using the oc genie. (numbers 1-3)
Digital compensation level and ocp expander should be set to high and enabled respectively when going for higher overclocks. (4 and 5)
Now for the rest of my questions ( 6 through 12) I have found suggested settings and some info after hours and hours of searching but still have a couple of questions about them.
Long/short duration power limit, and primary/secondary plane turbo limit. I see suggestion settings of 250 or 255. I take it this is simply max supplied watts to the chip? If so why the 250/255 values? Is that the highest the board will give? Is plane turbo limit related to the enhanced turbo stated and how much wattage can be drawn there while the other limit is for any non turbo frequencies?
Long duration maintained, I've seen 60 suggested a lot. Why is this?
There's not an over abundance of info on these boards as compared to asus so it seems info is a little less documented and video tutorials explaining things are next to none.
Any help would be appreciated. Thanks

I need help with my text tone and I have ring tone. no text tone for the 4s.

I need help with my text tone. I have ring tone no text tone. I have a 4s.

Hi Sarar2333! Let's get your text tones working again!
Here's a link with instructions how to enable and change your alert sounds for your text/notification settings on your iPhone 4S: http://vz.to/1stiF8a. You can ensure text tones are enabled by selecting a tone in the "Text Tone" setting. Let me know how that works out for you. Thanks!
AnthonyTa_VZW
Follow us on Twitter @VZWSupport

Need help with session using dreamweaver

have created a login page (php/mysql) with username and
password boxes. when the form is submitted the mainpage loads up.
i want the main page to be specific to that user, so i want
their name to appear in the first line. eg.. Welcome back 'David'
I read a tutorial in the past that tought me to send the
users id in the URL and then create a record set on the mainpage
that was filtered by the URL parameter.
I have forgotten how to do this and the tutorial is no longer
available on Adobe's site.
I tried that with
$_SESSION['MM_Username'] = $loginUsername; \\ in first page
then
echo $_SESSION["MM_username"]; \\in second page, but the
problem is that is not showing user name.
i need help with that please!
can anyone tell me how to do this? Thanks in advance,
AM

IN the second page, you have to make sure that the session
has been started.
Put this at the very top of the page -
<?php if (!isset($_SESSION)) session_start(); ?>
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Alidad" <[email protected]> wrote in
message
news:g184i4$jgf$[email protected]..
> have created a login page (php/mysql) with username and
password boxes.
> when
> the form is submitted the mainpage loads up.
>
> i want the main page to be specific to that user, so i
want their name to
> appear in the first line. eg.. Welcome back 'David'
>
> I read a tutorial in the past that tought me to send the
users id in the
> URL
> and then create a record set on the mainpage that was
filtered by the URL
> parameter.
>
> I have forgotten how to do this and the tutorial is no
longer available on
> Adobe's site.
>
> I tried that with
> $_SESSION['MM_Username'] = $loginUsername; \\ in first
page then
> echo $_SESSION["MM_username"]; \\in second page, but
> the
> problem is that is not showing user name.
>
> i need help with that please!
>
> can anyone tell me how to do this? Thanks in advance,
>
> AM
>

Need help with buying graphics card and ram for MSI 865PE NEO 2-V

Hi,
I want to buy 1GB of ram for motherboard MSI 865PE NEO 2-V I need help with finding correct parts.
I also want to buy 512Mb or 1GB graphics card.
as i said before i need help with finding correct ones so they match motherboard, I would appreciate if any one would post link to cheap and fitting parts.
I found graphics card allready, i just need to know if it will fit.
the card is
NVIDIA GeForce 7600 GS (512 MB) AGP Graphics Card
Thanks for help.

here you can see test reports for your mobo:
http://www.msi.com/product/mb/865PE-Neo2-V.html#?div=TestReport

HT4528 I need help with my I phone and I can get verizon to let me on there to talk and I will have to have my phone so that I can do what you tell me to do

I need help with my phone it is not ringing and I cant figure where in here to make it so it will something has been pushed so I cant hear any calls or texts

Not when you insist on being so impatient.
These are user to user support forums. No one here is paid to read or respond to messages.
Try explaining the issue instead of the jumbled, rambling mess of a title and we will be happy to assist.

Need help with tomcat 5.5 and using java classes

hey there,
i am trying to set up tomcat 5.5 on my computer at home and have sucessfully done so. i have been trying to use Java classes inside my JSP files however tomcat thows an internal servlet error as follows:
org.apache.jasper.JasperException: Unable to compile class for JSP
An error occurred at line: 144 in the jsp file: /order.jsp
Generated servlet error:
ProductList cannot be resolved to a type
An error occurred at line: 144 in the jsp file: /order.jsp
Generated servlet error:
ProductList cannot be resolved to a type
An error occurred at line: 144 in the jsp file: /order.jsp
Generated servlet error:
Product cannot be resolved to a type
i have the classes located as the setup tutorial recommends (root/WEB-INF/classes/) and still nothing works. i would appreciate any help anyone can give.
thanks,

Which tutorial are you following?
As of java1.4, all classes must be in packages for them to work in Tomcat. This means your beans and servlets too.
Put your beans in a package, and then recompile them, and put them in the right place.
eg
package com.mypackage
public class MyClass ...
once compiled would go into WEB-INF/classes/com/mypackage/MyClass.class
Are you using Product and ProductList classes in scriptlet code?
Have you imported them with a page directive
<%@ page import="com.mypackage.Product, com.mypackage.ProductList" %> ?

Need Help with External Hard drives and too much music

I am not terribly tech-savvy, and I need your help. I have a G5 PPC dual processor with an internal 250GB drive. I have two seagate firewire/USB2 external hard drives. One is 250GB and one is 350GB. I want to know how to use them to get my Mac to run faster and better.
My original hard drive is 7GB shy of being full. Almost half of this is my itunes library which is over 100GB. The older (250GB) hard drive has about 150GB of photos/videos.
My Mac is running slow as molasses and when I power up the external hard drives it slows down to what I recall my original Mac Plus ran like.
I use the G5 primarily to work with photos, illustrations and creating the occasional DVD with video and photos. the apps I use most often are Photoshop, Illustrator and Painter. I always listen to music while work.
I hope all of this information is helpful! Here is my question:
What is the best way for me to set up and use these external hard drives to return my G5 to its original blazing (to me) fast speed?
PPC G5 Mac OS X (10.4.9)

I think you should look at adding two 500GB internal drives. I'd say Maxtor MaxLine Pro for cost, but they also run much warmer (43ºC even when nearly doing zilch) so I'd go with WD RE2 500GB for $40 ea. more.
dump whatever you don't need, trash anything that is hogging space and is just temp file or useless cache. Web browsers can leave behind a ton of small files eating up tens of MBs.
Use SuperDuper to backup/clone your drive.
Disk Warrior 4 to repair (after it gets to 15% free, or just forget for now).
A 250GB drive formats to 240GB and you have ~3% free it looks like.
For every data drive plan to have two backup drives.
Keep your boot drive to 40% used.
And your data drive to 60%.
Backups can go a little higher.
Drives are cheap and inexpensive, especially for the space and performance. And they have improved SATA over the years it has been out.
By doing a backup followed by erasing your drive, and then restoring it, using SuperDuper, which optimizes the organization, skips copying temp files that aren't needed, it also defragments your files. I would do backup daily to different sets that you "rotate." And before any OS update. And do the erase and restore probably every 2 months.
Make sure you keep one drive partition somewhere that is just your disk utility emergency boot drive that is not a copy of working system, used for doing repairs like running Disk Warrior and Disk Utility.
You may need to repair; backup; even erase and restore your external drives. Rather than spend on vendor made case, just pick up a good FireWire case either with drive, or bare (and add your own). I think it'd add 500GB FW drive though.
Why?
To begin backup of your current drive. To leave your other FW drives "as is" for now.
Then install a new internal 500GB drive as well so you now have a good current backup, and you have moved your data off 250GB to 500GB. If anything happens, you have one off line FW backup.
Then begin to clean up, organize, and get your FW drives working. It sure sounds like they have had some directory or file problems.
You can find a lot of Firewire and SATA drive choices over at OWC:
http://www.macsales.com/firewire/

Need help with ext. SWF and XML

I'm trying to create an External SWF to load into my main
site (photography).
Home | Portfolio | Published Work | Bio | Contact
The SWF I want to load externally is Portfolio because it has
5 sections
Those 5 sections are:
-Editorial
-Adventure
-Fly Fishing
-Multimedia
-Weddings
I'm looking to keep this dynamic as possible, but I'm one of
those guys who doesn't write code from scratch, but knows AS well
enough to modify a base or a generic template if ever given. It
would be easier to use one subsection as an example, which could be
applied to all others.
e.g. "Fly Fishing" 1-Main container; 5-10 thumbnails (1
dyanamic thumbnailcontainer)
- I don't know XML (but can modify it). basically having an
ID tag for each image, possibly dynamically generate a thumbnail
too. Also have a spot for dynamic text to load in (captions with
multiple text lines for images upon onRelease - maybe this could be
it's own MC that loads on top of the main photo container)
- on (release) on a thumbnail: there would be a little
information icon that would appear. If you mouse over, it would
overlay a layer over that specific ID photo, and the text appear.
RollOut it would fade out the layer above that specific ID photo.
- Transition: FadeOut/Blur/Exposure Blur, something
interesting to that nature.
- Thumbnails: is it just easier to create thumbnail images
manually, and just create a separate container?
- Image folders: I would imagine each section would have
it's own watch folder. For example "Fly Fishing" would be a folder
"/swfImg_flyFishing/", but perhaps having one XML file.
- XML file details
id
location
caption summary
title
As you can see, if I had one template to build off of, I
could repeat it self for the others. I need help and if there is a
flash component (free or purchase) that does at least 70% of what I
need, please share information. thank you!Portfolio

I know doing a pushback to the client requires Flex Data
Services, but since I don't use FDS I can't tell you exactly how.
But look in the documentation about "pushing" data to the client.
Once you've figured out how to do that, you can trigger that push
once you've finished editing the xml file. You may want to ask over
in the FDS forum.

Need Help with Formula using SQL maybe

I need help! I work with Crystal reports XI and usually manage just fine with the Formula editor but his one I think will require some SQL and I am not good at that.
We are running SQL 2000 I think (Enterprise Manager 8.0) Our sales people schedule activities and enter notes for customer accounts. Each is stored in a separate table. I need to find activities that are scheduled 240 days into the future and show the most recent note that goes with the account for which that activity is scheduled.
The two tables, Activities and History, share the an accountID field in common that links them to the correct customer account.   I want to look at dates in the Startdate.Activities field more than 240 days in the future and show the most recent note from the History table where the accountid's match. I figure my query will contain a join on AccountID.Activities and AccountID.History used with Max(completedate.History) but I do not understand how to word it.
I would like to perform all this in crystal if possible. I humbly request your help.
Membery

You SQL would look something like this...
SELECT
a.AccountID,
a.BlahBlahBlah, -- Any other fields you want from the Activities table
h.LastComment
FROM Activities AS a
LEFT OUTER JOIN History AS h ON a.AccountID = h.AccountID
WHERE (a.ActivityDate BETWEEN GetDate() AND DateAdd(dd, 240, GetDate()))
AND h.HistoryID IN (
     SELECT MAX(HistoryID)
     FROM History
     GROUP BY AccountID)
This method assumes that the History table has a HistoryID that increments up automatically each time a new comment is added... So a comment made today would always have a higher HistoryID that one made yesterday.
If I'm wrong and there is no HistoryID or the HistoryID doesn't increment in a chronological fashion, it can still be done but the code is a bit more complex.
HTH,
Jason

Need help with passcode using the "Remote" app

Hello and thanks in advance. I can't find a place on iTunes to enter the passcode from the Remote app.

PLEASE READ!!!
I have a HP Pavilion - Windows XP
I need help as well with the passcode. I went to Networking and Sharing center and clicked customize and changed the name to NetGear because that is what it says next to my WiFi on my iPhone but with my iPhone under Settings it says WiFi NETGEAR > but when I click on it, it says choose a Network. Is NETGEAR a network? How do I find or change to a Network? is this the problem?

Need help with configuring web root and root url URL

Hello Folks,
I have been trying for a while to the flex 4 tutorial which asks you to connect to a mysql database. I have been able to configure the DB but cannot figure out what my web root and root url should be. Is there a web service that needs to be deployed or started. Would it be the IP address of the database that I created ( I tried that ) . I get the idea that an apache service must be started somehow on my flex environment and then I must find the root of the apache server. I dont see an apache directory anywhere. I am finding this difficult to know where to begin.

Hi,
First you need to be running a web server on your computer something like wamp/mamp is usually the better choice as most people have had the best success with this server setup(and it has all the current services like php and myssql)
When you use the wizard the path to your webroot is usually whre you located the wamp/mamp install, for windows it maybe something like c:\wamp\www not 100% sure about macs but I think the 'www' folder on a mac is 'htdocs'.
your url is either http://localhost or http://127.0.0.1.
David.

Need help with Olympus E-M1 and ACR 8.3 Results

Hi:
1. I'm fairly familiar with photoshop and ACR, but definitely not an expert.   I'm also very familiar with the Olympus RAW files since the E-5 (I've owned the E-5, E-M5 and several Pens); I now recently purchased the E-M1 and I've been having problems getting decent images out of the RAW files (compared to the prior Olympus RAW files).
2. Problem: it just "feels" that the overall tone curve is more abrupt, especially in the highlights.    With the prior Olympus RAW files, the transition from moving the exposure slider to the right and then getting blown out highlights was more gradual;   there just seems to be an overt decrease in "headroom" when dealing with highlights in the E-M1 RAW files.   I know this makes no sense in that the dynamic range is supposed to be greater with this camera compared to the prior ones.
3. Problem: In relation to the above issue, it also seems that the highlight slider is not as specific as it used to be in that when I move it to the left, more of the histogram seems to be affected as opposed to the bright / highlight region.   It now seems to basically counteract any adjustments made to the exposure.   Again, this may be my imagination but it just feels this way.
4. Problem: In relation to the above issue, the other strange observation I've had is that although the histogram of the image shows no clipping, the image may have very bright areas with almost imperceptible detail;   when I click on it and view that data point within curves, it shows it to be well below 255.    In my lame flower shot example (it's not a good example but I couldn't find anything else right now), I would have guessed that in the brighest petal area, that it would be something like 250, but it's only 220.   But when I zoom in, there's really no texure or detail or data.
5. The above issue in re: highlight rendering and control may or may not be related but it's the first time, I've been having issues and I've never had such problems with either ACR or prior Olympus cameras and thus I'm wondering if this is some issue with how ACR interprets the E-M1 file. I did do some comparison with Capture One 7 and that does a definitely better job of highlight recovery in that it seems to more preferentially target just the highlights and definitely does a better job with color rendition.   I have Olympus Viewer 3, but it's so slow and lame, that I haven't done much testing with it.   Any thoughts and advice much much appreciated.

Also, you might want to upload your raw file, a full-size JPG of what you posted, above, and an example from C1 to www.dropbox.com and post a public link, here, for others to experiment with.

I need help with Lightning using Exchange and Postbox

Similar Messages

Maybe you are looking for