I need help with my DVD drive.

After 4 hours of wandering around the net and not finding anything of use, I suspect I am posting on the wrong board. But hopefully somebody will do whatever is necessary to get this in the right place.
Long story short, my Satellite A215-S4817 DVD drive is being a bit temperamental, it can read and burn DVD-R's but can't read retail DVD's. The OS is Vista if that helps.

If you use toast make sure on the left, it is selected to PC & Mac
If you use Popcorn and it automatically compresses.
Both of these softwares will read and copy at the best speed It is all automatic.
There are several things that might affect your process, It depends on if you are copying DATA, AUDIO, MOVIES, and if you are using ripping software.
Cheers Don
One last thing, Not all players will read newer Formats
http://www.videohelp.com/dvd.htm

Similar Messages

  • Need help with cd/dvd drive problem.

    I have a MacBook (black) running OS 10.6.8. The internal cd/dvd drive no longer works. I put in a disk and it gets pushed back out after a few seconds.
    I just bought a LG Ultra Slim Portable DVD Writer model GP 60NB50. The MacBook recognizes the LG drive for opening music and movies, and for burning photos to a disk.
    I have been unable to use the LG drive as a start-up drive. I put Disk Warrior into the drive and restarted the computer holding down the “C” key. When the computer starts to launch there is a flash of a “?” on the screen then it loads from the hard disk. I also tried using the Apple start up disk that came with the computer but that also failed.
    Any idea how I can get the LG drive to become a start-up drive when needed?
    Thanks,
    Orin

    If your computer is a TouchSmart, and I am only guessing that it is, this document might help.
    Good luck!
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01496336&tmp_task=solveCategory&lc=en&dlc=en&cc...
    GeorgeFN
    I work on behalf of HP.

  • Need Help with External DVD Drive on my iMac

    Hi, This is my first post and I hope there is someone out there that can help me. My PC just died and I'm finally moving on and taking it where it belongs, the dumpster. Anyways, I've been using my Pioneer DVD burner in there and now I'm trying to use it on my Intel iMac. When I hooked it up using an external firewire case, this is what shows up in my profiler.
    PIONEER DVD-RW DVR-110D:
    Firmware Revision: 1.41
    Interconnect: FireWire
    Burn Support: Yes (Apple Shipped/Supported)
    Cache: 2000 KB
    Reads DVD: Yes
    CD-Write: -R, -RW
    DVD-Write: -R, -RW, +R, +RW, +R DL
    Burn Underrun Protection CD: Yes
    Burn Underrun Protection DVD: Yes
    Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
    Media: No
    Even though it is Apple supported, nothing mounts and it cannot burn anything in iTunes, Toast, etc. Can someone out there help me out.
    Thanks in advance!
    Montri - THAIICE

    Apple Discussions!
    Since you have an Intel, you will need to repost in the Using DVDs and CDs with your Intel-based iMac Forum so that users using the same model computer as yourself will be able to help you.
    This is the G5 iMac Forum.

  • Help with my DVD drive?

    hp pavilion dv9650us dvd player will read regular dvd's but won't read regular home made dvd windows vista is my OSH
    Hi my Dvd player was working fine until I did some driver updates, then I noticed my DVD and audio wasn't working. I went back and reinstalled the old drivers for my audio and now it works and my DVD player will read and play regular DVD's you purchase but won't read my DVD's I make at home when I do my video progjects.   Is there a problem with my DVD driver reading the disc and is it something that can be fixed with a software update?

    gjames3468 wrote:
    hp pavilion dv9650us dvd player will read regular dvd's but won't read regular home made dvd windows vista is my OSH
    Hi my Dvd player was working fine until I did some driver updates, then I noticed my DVD and audio wasn't working. I went back and reinstalled the old drivers for my audio and now it works and my DVD player will read and play regular DVD's you purchase but won't read my DVD's I make at home when I do my video progjects.   Is there a problem with my DVD driver reading the disc and is it something that can be fixed with a software update?
    Most likely it is the driver since it was working.  Was the reinstall of the old drivers an install, or a Restore back to an earlier date?  I would have done the Restore thereby getting the actual drivers and settings I had before the update.  You can still try this if it hasn't be too long ago. 
    If I have been helpful, a Kudo is always appreciated.

  • Need advice with internal DVD Drive

    Hello, my dvd drive reads CD's but not DVD's (Movie or Data). It makes a clicking sound then ejects the DVD which made me think it was a hardware failure, but when I put in a CD,it is fine. I've deleted the dvd.plist and ran permmission fixer. Any ideas, or should I just get a new drive.

    Go here and scream at Apple for refusing to address this ongoing issue. Explain the issue(s) you are having. -
    http://www.apple.com/macosx/feedback/
    People keep starting new discussion threads on this same old problem. If you have the money to go out and spend around $20 (US) on a DVD lens cleaner, please post your result here.
    I posted the following response yesterday in a similar thread:
    I realize this isn't a forum for venting, but I'm really getting sick of this ongoing issue. Where is Apple in all of this? Read on, if you want to see how far back this goes.
    I have an older G5, purchased in November 2003, with a Pioneer Stupordrive which exhibits the same awful behavior. I've been following these G5 Superdrive discussion threads for nearly a year, and I've tried most of the suggestions offered. None have worked for me, and it appears that there are a large number of Mac owners with similar DVD drive problems.
    My Stupordrive used to mount and play ALL DVDs. That lasted for about 1-1/2 years from purchase. Now it plays some retail DVD movies, but not others. It burns DVDs just fine, but won't read them (see below). Sometimes it ejects them, other times it just sits there trying to mount with the "unfomatted floppy" sound until I manually eject via the eject key (takes two tries). I have used various brands for burning, including the over-priced DVD-R's (4x) from the Apple store. No problems with burning or reading CDs. I will try Verbatim, but seriously doubt it will make any difference. The worst part of this is that I have about 25Gb of unreachable DATA on DVDs.
    This problem seems to be prevalent, and is independent of OS version, purchase date, or configuration. Before I go out and spend money (even $40) on a new drive, I want to be sure it will not behave the same way because of some fundamental flaw in the G5 architecture or the OS.
    I have an ancient Micron PC that's six years old with its original DVD player. Guess what; it mounts and plays/reads every DVD I put in it, including those I burned on the Mac.
    Can anyone suggest a drive that will work on the G5 and last for more than a year or so?

  • Help with a dvd drive

    I have a mac laptop g3 powerpc and it came with a cd-rom drive, but i also have a dell(2001) and it has a dvd drive. I wanted to know if i could take the drive from the windows and put it in my mac.

    heysup,
    Welcome to the Discussions.
    If you have the Wallstreet (Powerbook G3 Series M4753, no USB or FireWire), this model uses a non-industry standard connector and the Dell will not work.
    If you have the Lombard (M5343) or Pismo (M7572), the form-factor is correct and the swap is possible. Here is how to identify your model powerbook:
    http://docs.info.apple.com/article.html?artnum=24604
    Depending on the DVD drive, it may not boot your Mac using the 'c' key but these drives usually will boot a CD or DVD by selecting it in the Startup Disk pane or when using the 'option' key when booting.
    If this Dell drive burns optical disks, you may also need to install PatchBurn for Tiger:
    http://www.patchburn.de/
    Here is how the drives are swapped:
    http://home.comcast.net/~macdan/PB99_2K_EBMsled.html

  • Need help with my DVD-ROM and Burner

    I’ve got a 875P Neo FIS2R, Sony DRU-510K Burner and a LITE-ON 16X DVD ROM. My LITE-ON drive is set to secondary master and my SONY burner is set to secondary slave but for some reason is the POST report it does not show my DVD drives. In windows XP it also does not show any of my drives. I have a 120 GB Maxtor 6Y120M0 SATA drive which is showing up in the POST report.
    Please I need this to fixed up ASAP
    If any one has any ideas the please reply
    Chatura

    Go to BIOS and set your IDE configuration, try this one:
    For Native Mode:
    ATA Configuration: SATA Only
    S-ATA Keep Enabled: Yes
    P-ATA Keep Enabled: Yes
    PATA Channel Selection: Both

  • I need help with my cd drive!

    I was given a power book g3. I was told that the previous owner had downloaded a bunch of **** and when they tried to clean it off they accidentally deleted whatever it is that makes the cd/dvd drive work. Can anyone help me!???

    It is extremely difficult to throw away the CD drivers. The kernel extensions in their entirety are only about 65 MB, so they would not be a target for "House Cleaning". If the CD is recognized as present in Apple System Profiler:
    Apple Menu > About this Mac > (More Info) > ATA Bus
    ... then its driver is likely loaded, and you should be able to read Data CDs.
    It IS possible they threw away iDVD (nearly 1.5 GB). This is for assembling your own photos into DVD-playable storybooks.
    If "DVD Player" (3 MB) is still in the "Applications" Folder, you should be able to use it to play music CDs/DVDs on your Mac.

  • Need help with second hard drive on mac G4

    I recently took apart another computer and installed the hard drive on top of the "master" drive hoping I would be able to download more videos, music ect but when i try and download anything message pops outs that my disk is almost full i need help as you can see. I thought all i had to do was connect the drive but I guess that wasn't it.

    chuck818, welcome to Apple Discussions.
    What size is your Master HD & how much free space do you have? Are you getting messages about the HD being full?
    Insufficient HD space can lead to many problems - freezes, directory/file corruption, etc.
     Cheers, Tom

  • Need Help with External Hard drives and too much music

    I am not terribly tech-savvy, and I need your help. I have a G5 PPC dual processor with an internal 250GB drive. I have two seagate firewire/USB2 external hard drives. One is 250GB and one is 350GB. I want to know how to use them to get my Mac to run faster and better.
    My original hard drive is 7GB shy of being full. Almost half of this is my itunes library which is over 100GB. The older (250GB) hard drive has about 150GB of photos/videos.
    My Mac is running slow as molasses and when I power up the external hard drives it slows down to what I recall my original Mac Plus ran like.
    I use the G5 primarily to work with photos, illustrations and creating the occasional DVD with video and photos. the apps I use most often are Photoshop, Illustrator and Painter. I always listen to music while work.
    I hope all of this information is helpful! Here is my question:
    What is the best way for me to set up and use these external hard drives to return my G5 to its original blazing (to me) fast speed?
    PPC G5 Mac OS X (10.4.9)

    I think you should look at adding two 500GB internal drives. I'd say Maxtor MaxLine Pro for cost, but they also run much warmer (43ºC even when nearly doing zilch) so I'd go with WD RE2 500GB for $40 ea. more.
    dump whatever you don't need, trash anything that is hogging space and is just temp file or useless cache. Web browsers can leave behind a ton of small files eating up tens of MBs.
    Use SuperDuper to backup/clone your drive.
    Disk Warrior 4 to repair (after it gets to 15% free, or just forget for now).
    A 250GB drive formats to 240GB and you have ~3% free it looks like.
    For every data drive plan to have two backup drives.
    Keep your boot drive to 40% used.
    And your data drive to 60%.
    Backups can go a little higher.
    Drives are cheap and inexpensive, especially for the space and performance. And they have improved SATA over the years it has been out.
    By doing a backup followed by erasing your drive, and then restoring it, using SuperDuper, which optimizes the organization, skips copying temp files that aren't needed, it also defragments your files. I would do backup daily to different sets that you "rotate." And before any OS update. And do the erase and restore probably every 2 months.
    Make sure you keep one drive partition somewhere that is just your disk utility emergency boot drive that is not a copy of working system, used for doing repairs like running Disk Warrior and Disk Utility.
    You may need to repair; backup; even erase and restore your external drives. Rather than spend on vendor made case, just pick up a good FireWire case either with drive, or bare (and add your own). I think it'd add 500GB FW drive though.
    Why?
    To begin backup of your current drive. To leave your other FW drives "as is" for now.
    Then install a new internal 500GB drive as well so you now have a good current backup, and you have moved your data off 250GB to 500GB. If anything happens, you have one off line FW backup.
    Then begin to clean up, organize, and get your FW drives working. It sure sounds like they have had some directory or file problems.
    You can find a lot of Firewire and SATA drive choices over at OWC:
    http://www.macsales.com/firewire/

  • Need help with external hard drive!

    Hi all,
    I have been having trouble with my external hard drive.
    My mac is reading the disk however all my files from the hard drive are missing?
    In disk utility is seems to show that there are files on the disk but I cannot see them?
    At the bottom is shows that there are files on the disk!
    PLEASE HELP!!!!
    Here is a screenshot of my disk utility

    Ok just to clarify the format issue...
    Just move the data from the external drive, format and then move it back if you want, as JiveMasterT explained.
    If the external drive is FAT file system, then you don't need to format the drive unless you are planning on using the drive as an OSX backup.

  • Hard Drive Crash - need help with choosing new drive and installation

    My hard drive seems to have crashed. My computer froze, and when I tried to reboot, it got stuck at the startup screen. I started from the system CD, ran the disk repair utility, and it said it could not repair the disk. I ran Tech Tool Pro and it could not repair the disk. I tried to start up in Target disk mode while connected to my older G4 iMac (that I'm using now as my backup), and the disk would not mount. So I need some expert advice - I am assuming the hard drive is toast. I wish I could at least mount it in target disk mode to transfer files, but I haven't been able to do that. I was going to take it in for repair (or possibly buy a new computer), but after reading some of the posts here, I am thinking I could just replace the internal hard drive with a 3.5" SATA drive.
    What I need to know is am I correct about this? And is this the right kind of drive for my iMac? Are there any specifications I need to be aware of when ordering a new drive? I downloaded the manual explaining how to replace the drive and it looks doable. I would appreciate any guidance as to choosing the new drive (specific brand names/models would be great), installing the drive, and tips for formatting, etc. Thanks in advance for your help!

    Welcome to Discussions - any 3 1/2" SATA drive will be fine, go to [macsales.com] or [smalldog.com] or [newegg.com] and choose whichever drive fits your wallet. Most of them are reliable, I have heard of problems with Seagate and Hitachi, but there are always some failures with any brand. Make sure to get a good warranty.Instructions will come with the drive, but you can download them from [Apple|http://www.apple.com/support/manuals/imac> as well.

  • Need help with total hard drive replacement and reinstall

    Hello everyone, let me first say thank you for all the help I hope I get. I have a HP Envy 14 1260se Beats Edition Laptop and I recently purchased a new SSD which really made my laptop speedy. The only problem I am having is that I purchased the recovery disks from HP so I could get all the drivers and everything restored but it does not work at all. So I used a windows 7 professional iso disk my friend had and installed windows (64 bit) and everything works perfectly, but I am missing the volume controls that show up on the screen. Usually when I press volume up or down using the keys on my keyboard it would show a bar in the middle of the screen telling me where my volume is. Now I just see the little volume icon in the taskbar which is just a little annoyance. Also I no longer have the beats on off button working. Is there a way I can download these little things to make my laptop almost the same as it was out of the box without all the bloatware? Any help would be appreciated and sorry in advance if this is confusing. 
    This question was solved.
    View Solution.

    Hi:
    I don't know about the Beats audio thing but I think you need the HP OSD utility to get the volume control to show up on the screen.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-106851-1&cc=us&dlc=en&lc=en
    Did you install the quick launch software?
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-97078-1&cc=us&dlc=en&lc=en&...=
    The probable reason the recovery disks didn't work is your SSD was of a smaller capacity than the mechanical HDD the notebook originally came with.
    They won't work normally on any hard drive that is smaller than the one the PC came with.

  • Need help with watching DVD-R from dubbed VHS

    For some reason when I try to play a DVD-r that I recorded from a VHS tape, it will not play.  I get the message that the disc is empty and yet I know it is not because it will play in the DVD player

    Hi @Rod64,
    Thank you for visiting the HP Support Forums and Welcome. It is a great site for information and questions. I would be happy to assist if needed, as there are many models of HP Pavilion Notebooks. I would need the Model number.
    How Do I Find My Model Number or Product Number?
    Please let me know.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Need help with kernal panic drive!

    Hi,
    While I was erasing 10,000 items from my trash, my G5 Quad kernal panicked and when I restarted it kept kernal panicking. I brought the computer to the Apple Genius at the store and they basically found that the boot hard drive, (my main drive) was needed to be replaced. They have sent me a new drive but I need to send the old one back.
    I have put the drive in a new firewire enclosure but when i hook it up to a computer and start it up, it make my computer kernal panick and I am not able to do anything with it.
    I have Date Rescue II and was hoping I could recover some of the files. Will this be possible? Can I make it so the kernal panicking does not happen so I can attempt a rescue?
    G5 Quad   Mac OS X (10.4.7)   2 Hitachi 500GB Drives and 4 external fw seagates

    Hi Brett and welcome to Apple Discussions.
    You could try Starting up in Safe Mode
    What is Safe Boot, Safe Mode
    Safe Boot takes longer than normal startup
    Safe boot may by-pass the problematic process/hardware (the airport card is a frequent culprit) and enable you to boot sufficiently to find out the OS. Click on the blue Apple top/left, then 'About this Mac'. If Safe Boot is successful take a look at Macintosh HD/Library/Logs, particularly Console and Panic. I'm no expert on deciphering logs but you could copy/past the last couple of paragraphs of Panic into a reply.
    Good luck,
    Adrian

Maybe you are looking for