I need help with my settings so that i can play using my soundcard and sing karaoke on analogue head

i would like to know what settings i need so that i can use my laptop for karaoke online. i have a new HP PAVILION G6 laptop operating windows 7-64 bit. I use a headset with plug in jack plugs 3.5mm. may i thank you in anticipation

Not when you insist on being so impatient.
These are user to user support forums. No one here is paid to read or respond to messages.
Try explaining the issue instead of the jumbled, rambling mess of a title and we will be happy to assist.

Similar Messages

I need help with my wifi text. I can't use them

I need help with my iPhone 4. I can't text since. I get wifi in my house ?

What is the make & model of the wireless router that you are trying to extend with the WN3000RP? Can any other wireless clients connect to the extended network, just not your iMac?

I can't tell if my previous messages came thru, but I need help with PSE 7.0. I can't use my drop shadow brush set anymore.

I am not sure if any of my previous messages went thru or not, but I have Photoshop Elements 7.0. I learned how to open a blank file and use a textbox to make my watermark and also my copyright logo and save them each as a brush. They were saved in the Drop Shadow Brushes. When I used my cloning stamp yesterday, I switched brushes to basic. When I later attempted to go back into the drop shadow brush set where I had saved the watermark and copyright logo, a message came up telling me the file couldnot be opened because it wasnot compatible with this version of Photoshop. I presume it is because of the special brushes saved there. What do I do now?

Follow these documents.
http://support.apple.com/kb/TS3742
http://support.apple.com/kb/TS2570
http://support.apple.com/kb/TS1440
http://support.apple.com/kb/HT1455
http://support.apple.com/kb/ht3964
http://support.apple.com/kb/HT1379
http://support.apple.com/kb/HT1509

On Windows 7, CS6 all products, but especially need help with ID. Fonts that are showing in other applications are not showing in ID.

on Windows 7, CS6 all products, but especially need help with ID. Fonts that are showing in other applications are not showing in ID.

The ID Program folder will be relevant to your OS...
I took a shot and right clicked on my Scripts Samples, choose reveal in Explorer and opened up the ID Program folder.
As shown, there is a Fonts folder.
Drag/Copy/Paste fonts to this folder.

I need help with a PDF file that is an image, the "Read Out Loud' option does not work, please help!

I need help with a PDF file that is an image, the "Read Out Loud' option does not work, please help!

You mean an image such as a scanned document?
If that is the case, the file doesn't contain any text for Reader Out Loud to read. In order to fix that, you would need an application such as Adobe Acrobat that does Optical Character Recognition to convert the images to actual text.
You can also try to export the file as a Word document or something else using ExportPDF which I believe offers OCR and is cheaper than Acrobat.

I need help with my videos now that I downloaded the ios6. It won't play.

I need help with my videos. I downloaded the ios6 and now they won't play. Does anyone know how to fix?

Wanted to let everyone know that after looking at other discussions I did a hard reboot and it is now working. Love this site!

I can no longer download and save files. They are now saved with a ".part" suffix that I can not use or open. What happened, I used to do this all the time?

Downloads seem to be happening normally at first but the file shows up with a file extension of ".part" that I can not use or open. If I refresh the folder where it was downloaded to, it disappears as though it wasn't there at all.
I used to do this and it just yesterday started to give me problems. It doesn't seem to matter what file type I do this with as PDF, MP3 and EXE files have all shown this problem.
Please help!

It is possible that your anti-virus software is corrupting the downloaded files or otherwise interfering with downloading files by Firefox.<br />
Try to disable the real-time (live) scanning of files in your anti-virus software temporarily to see if that makes downloading work.
See also "Disable virus scanning in Firefox preferences - Windows"
* http://kb.mozillazine.org/Unable_to_save_or_download_files

I need help with a backup file that was deleted and now undeleted from my hard drive

Last month (May 6, 2011), I was updating my iPod Touch 4G with the new software that came out. I always make a backup of my iPod's data before I update it. While my iPod was updating I left my iPod and computer alone and was doing things around the house with my mom. And when I was done I went in my room to see if it was done and my computer decides that it was going to freeze and crash on me (with my iPod plugged in and stuck on the updating or verifying software mode.) I managed to get my iPod back to working condition again but losing everything on my iPod. I formatted my computer hard drive but I managed to get back the backup I lost. I need help on getting the backup into iTunes so I can get my data back. I am not Jailbroken and I plan not to Jailbreak. I however saved the backup file in a folder other than the Mobilesync folder. I am also running on Windows XP. Someone please help me and thank you in advance!

I was able to backup my iPod and I tried to restore my iPod again and it goes through the process and everything but it restores the temporary data that I had on there. It didn't restore application data or the current photos and videos that I had saved in Camera Roll before this all had happened. It is almost like it goes back to factory settings but I have some photos that were saved on the other backup that I was temporarily running on. The backup that I am looking to restore is the only backup file in the Mobilesync folder as of right now the others are saved somewhere safe for right now. Why doesn't it restore my application data or my Camera Roll pictures and videos that I saved before my computer crashed last month? Can this problem be fixed?

I need help with export settings

Hi everyone,
I need help outputting an HD file for presenting a video to a client. I have tried exporting to HD .mov (H.264 codec) and PE keeps crashing (error compiling movie). From what I’ve read here, it’s due to the gargantuan file QT creates and HD space (even though I think I have enough HD available).
So, I need a recommendation from you on what kind of file to output which will allow me to present the movie to the client in HD. This file is solely for the presentation, I have already published for web (FLV) and YouTube (direct share from PE) and they both worked fine.
Here are my project specs:
Timeline:           4:26
Format:               1920 X 1080 HD
Timebase:          29.97 frames per second
OS:                        Windows XP SP3
Processor:          Intel Core 2 Duo @ 2.66GHz
RAM:                    4GB
Project Drive:   250GB disk with 152GB free space internal dedicated project drive (separate from OS)
Thanks in advance for your help,
Jose

Hi Steve, Neale,
I wanted to follow-up on this post. I came into the office today to run a few tests so I can make sure that I have the correct settings on my camera and PE project for the next time around. Here are few observations I was wondering if you can comment on:
My Sony camera cannot shoot HDV. The only format it supports is AVCHD, so I'm stuck converting.
I tried to convert the footage I have to HDV with the software I have (AVS Video Converter and Koyote Soft HD Converter) and neither of the two have an "HDV" conversion setting. I see AVI, MPEG, MOV and many different settings in each (AVI: Hd Video 1080p: H.264AVC, 29.97fps, 4200kbps, Audio MP3, 256 kbps or MPEG: HD Video 1080p - MPEG2, 15000 kbps, 1920X1080, 29.97fps, etc). What should I be looking for?
I searched for "best file format" in the forum and found various postings from both of you referring to converting to DV-AVI within PE; especially if you have AVCHD footage (which I have). So, I followed directions and converted a file for testing. Then, I created a new project using HDV 1080i 30 settings and imported the converted file. I still get a red line on the timeline. Any thoughts on what I'm doing wrong?
I also converted the MOV files (shot in HDV 60i with the pro camera) to DV-AVI. I also get a red line on the timeline...
The DV-AVI converted footage (both cases) doesn't appear to be HD. It looks jagged on the preview window. Is it HD?
The DV-AVI converted footage is almost double the file size as the MTS (AVCHAD) file (138mb vs. 60mb). Isn't that going to make PE run slower?
Thanks in advance for your help. I just wanna make sure I do my homework now so I set everything up correctly on the next project.
Jose
P.S. I almost forgot! Here's the link to the live video on YouTube: http://www.youtube.com/watch?v=fEkqPmefJV0
Message was edited by: josejb70 - Added YouTube link

Need help with compressor settings

I hoped someone could help me with this. I have HD footage that has been captured in FCP as SD, so it's 4:3, with letter box so that the original 16:9 footage wasn't stretched.
I need to make small Quicktime movies for streaming on the internet. I want to keep the proportions that I have, but I want to crop out the black letter box for a 320x180 video. How do I do this?
I could also use help in determining which codecs to use. I want the best possible picture quality at a file size of less than 2MB per 1 min. of footage at the above dimensions.
Please help if you can. Thanks!

I'm also experimenting with the exact same thing. Only difference to yours - I am maintaining the 4:3. Here's what is giving me best results so far - the quality is very good, however I am still working on reducing the file size -> right now I'm at 4 MB/minute. I am trying get better file size only by slowly reducing the Kbps in the Video Settings until my results get unacceptable. All the rest remains as here - (my COMMENTS IN UPPER CASE):
File Extension: mov
Estimated file size: 970 KB
(I'M USING A 15 SEC TEST CLIP)
*Audio Encoder
IMA 4:1, Stereo (L R), 22.050 kHz
*Video Encoder
Format: QT
Width: 320
Height: 240
Pixel aspect ratio: square
Crop: (L: 50, T: 50, R: 50, B: 50)
(I'M CROPPING AWAY THE ACTION SAFE ZONE, KEEPING 4:3. YOU CAN ADJUST THESE SETTINGS TO YOUR LIKING IN THE GEOMETRY TAB.)
Frame rate: 12
(MY SOURCE IS DV PAL - THUS 12 FPS. IF YOU ARE USING NTSC YOU SHOULD GO FOR 15 OR EVEN 10 FPS. THIS WILL GIVE YOU HALF OF EVEN 1/3 FILE SIZE RESPECTIVELY)
*Frame Controls:
Retiming: Nearest Frame
Resize Filter: Linear Filter
Deinterlace Filter: Motion Adaptive
Adaptive Details: Off
Antialias: 0
Detail Level: 0
Field Output: Progressive
*Codec Type: H.264
Multi-pass: On, frame reorder: On
Pixel depth: 24
Spatial quality: 75
Min. Spatial quality: 25
Temporal quality: 50
Min. temporal quality: 25
*Average data rate: 0.512 (Mbps)
I hope this helps you. Please let me know if you find out anything helpful to keep that quality, but reduce the file size! Good luck. Keep in touch!
Jacques
Message was edited by: Jacques Tarnero

I am 67 years old and need help this a disgusting company that they can't help the elderly with phone support

this a disgusting company that they can't give phone support to a 67 year old woman that doesn't understand all this giberish computer

This is a user to user forum, not Adobe support... ask a question and someone may be able to help
The information you need to provide when you ask a question is below... sorry... video editing IS fairly technical
From the Premiere Elements Information FAQ http://forums.adobe.com/thread/1042180
NOTE - McAfee kills the program http://forums.adobe.com/thread/1460089?tstart=0
•You MUST use an account with Administrator Privileges to run Premiere Elements
•(Doing Run as Administrator http://forums.adobe.com/thread/969395 [says Encore and also for "All" versions of Premiere] will sometimes fix "odd" errors)
•What version of Premiere Elements? Include the minor version number (e.g., Premiere Elements 12 with the 12.0.1 update).
•What operating system? This should include specific minor version numbers, like "Mac OSX v10.6.8"---not just "Mac"
•Has this ever worked before? If so, do you recall any changes you made to Premiere Elements, such as adding Plug-ins, brushes, etc.? Did you make any changes to your system, such as updating hardware, printers or drivers; or installing/uninstalling any programs?
•Have you installed any recent program or OS updates? (If not, you should. They fix a lot of problems.)
•What kind(s) of image file(s)? When talking about camera raw files, include the model of camera.
•If you are getting error message(s), what is the full text of the error message(s)?
•What were you doing when the problem occurred?
•What other software are you running?
•Tell us about your computer hardware. How much RAM is installed? How much free space is on your system (C:) drive?
And some other questions...
•What are you editing, and does your video have a red line over it BEFORE you do any work?
•Which version of Quicktime do you have installed?

Need help with export settings...Please

I am brand new to the camera I have but been using FCP for 6 years. The camera is a Panasonic HMC150 that records in the AVCHD codec. I have an Intel Imac 20 2.4 Ghz 4 gigs of ram. My audio/video settings for the sequence in FCP are as follows:
Sequence pre set: Apple pro Res 422 1920-1080 60i 48khz (footage is 1080 60i)
I Log and Transfer with no problem, edit no problem.
My question is when I go to export the finished sequence to Idvd or DSP, what settings do I use?
I have exported to quicktime movie file with "current settings" and I have had NO luck in compleely burning a DVD. Is this the correct setting? what is everyone else using? Any help would be greatly appreciated!

DVD is standard definition. You have to compress your HD material to SD first. Crack open the manual for Compressor or DVDSP and you'll get loads of valuable info. The first 30 or so pages of the DVDSP manual are quite informative, and easy to read.

I need help with export settings of FCP project edited HDV 16:9

Hello All,
I have searched the forum only to become more confused. I shot and edited my first HD project and am ready to burn it. What are the settings needed by DVDSP for my FCP export?
FCP 6.0.5
OSX 10.5.6
1080i

Export to 16:9 SD m2v.
Usually I use self contained with an uncompressed Codec then bring that into Compressor to use Virtual Clusters. Start with a Compressor preset that is 16:9 SD that fits the footage (in other words if the video is 67 minutes, start with the 90 Minutes) and adjust frame filters to resize "better"
Some more general info on encoding to make things fit and issues to keep in mind
http://dvdstepbystep.com/faqs_7.php
http://dvdstepbystep.com/faqs_3.php
Take a look at these threads, so more details and options
http://discussions.apple.com/thread.jspa?messageID=8715713&#8715713
http://discussions.apple.com/thread.jspa?messageID=9070936&#9070936
And the others on the subject. Type in "HD SD" and you will see many different disucssions

Need help with recovering old account that e-mail is no longer valid. Birth date on account is not correct.

Does anyone know how to get an old account password when all the information on the account is not accurate and the e-mail address is no longer valid.

If none of the following will work If you forgot your Apple ID password (which sounds likely) contact Apple support: Apple ID: Contacting Apple for help with Apple ID account security

Need Help With My 40G Creative Zen Touch Mp3 Play

Got this beautiful mp3 player for a steal at only $95 dlvd!
Works great, only problem is I just installed the software and when I run the Organizer thing, it doesnt detect any mp3s. So when I go into my folders containing mp3's they dont show up. I tried to associate formats using the File Options in the settings menu but there are no file types listed to associate! Im confused at what to do.
Also when the program software was installing I kept getting error messages relating to the registration of certain parts of the program, it still installed complete but gave me a error message to report to Creative. Everything works fine so far though?
Can anyone help me out here or recognize the problem?

micromouse wrote:
Your installation did not complete successfully.
<FONT face=Helv size=2> Here is what you should do:
- Download and install the latest Creative MediaSource Player/Organizer 3.30.2 from your product download site. Make sure that you install this first before installing the rest of the MediaSource plugins listed below.
- (Depending on your product and firmware)
For non-PlaysForSure Zen series: Download and install the latest Creative Zen and NOMAD Jukebox plugin 2.00.20 for Creative MediaSource from your product download site.
or:
For PlaysForSure Zen Touch: Download and install the Creative Software Suite for PlaysForSure-enabled Creative Zen Touch Players.
- If it is listed for your product: Download and install the latest Creative MediaSource Plugin for CD Burner 3.0.8 from your product download site.
Hi thanks for the help, Im not sure if my ins the Plays for sure model or not? Its the Creative Zen Touch 40 GB. I bought it without a manual so im not positi've how to check the details. It came with a software installation CD, that is what I used for the software. So does this mean I just need to download the plugins you listed? Is that what is affecting the Organizer in the fact that it doesnt display mp3s?

I need help with my settings so that i can play using my soundcard and sing karaoke on analogue head

Similar Messages

Maybe you are looking for