I need help with my setup Please !!! 2800+ athlon xp
hi all .......... great forum here.....!!!
I am having probs with my new setup and I am at a wits end of what to do so i'll explain my problem.
I have just bought a AMD athlon 2800+ cpu for my mobo (KT3 ultra 6830e v.1.0)
and I am unable to run the chip at correct speed??
The bios wont boot the computer if I try to set the fsb for cpu at 166 ?? Am I correct in thinking that a 2800+ Athlon needs to be run at 166fsb to get the 333fsb setting?
I am currently running it at 133fsb and it is registering it as a AMD 2200+ chip ???
I am quite new to playing about with my bios but at the moment it is set at defaults on everything because i had to reset the cmos jumper about 8 times last night after trying different settings, in the end i gave up and thought i'd ask u guys for help???? Please !!!
I spoke to the shop i bought the chip from and we got talking about that when i set the fsb for chip to 166 it changed the ram settings to host clock + 66 (host clock was set at 100mhz) thus trying to make my 2100 ram(266) run at 2700(333) specs ?
Is this the problem why my computer wont boot when it is set to 166 fsb cuz it is asking the ram to be 333ddr when it isn't???
Is my problem going to be solved if i purchase some 2700 ram ?? if so i'll be quite happy, or is my board just not capable of running this 2800+ cpu on it???
i read up b4 i bought the cpu and i thought i was able to run this chip maybe i read wrong? any help would be greatly appreciated , oh i also flashed my bios to the most recent msi update which was 5.7 i think (AMI bios) and the flash was succesfull (LOL) very worrying!!!!
anyway hope i have explained my problem well enough as i myself am very confused!!!!
Thanks in advance
Dave
i have just had a look around the net and it looks like there are two versions of the 2600+ available one with 133/266fsb support and the other with 333fsb ???
Do u know that if i take my 2800+ back to the shop and change it for a 2600+ cpu if i should just get a normal one(133/266fsb) or get the 333fsb version???
as that link u posted for the mobo supported cpus only lists the 2600+ as being a 133/266fsb chip ???
I will get some 333ddr ram as well just incase i need this to allow the 2600+ to run correctly
Also (sorry to be a pain) but can you explain to me how to change the multipliers correctly to get full power from the chip ?? as i read that a 2600+ comes out at 1.91ghz standard , but i was reading a review where the user was told by AMD that it will run higher by changing fsb or multipliers (or both?) ???
Do u have to set the fsb to 133 and then change the multiplier to a value to up the speed or just keep changing the fsb alone and leave the multipliers alone ????
Hope you can help me......
Thanks once again for your replys..
Dave
Similar Messages
-
I would need help with saving some eamil messages to a disk to unclutter my email. How can I do this please?
Thanks.
ElisabethOpen the email and then from the File menu select Save As Rich Text Format. That'll save it to open in TextEdit. If you want a pdf then open the email and do command-p (Print) and then from the PDF drop down box lower left corner select Save as PDF.
-
Need help with Portal Themes -- Please help
I need help with Portal Themes. I have read every document I can find but I am having no luck. All I want to do is change the colors for the Exceptions on one of my queries. I have created my own Portal Theme where I have changed the colors but I do not know how to assign my newly-created Portal Theme to my query. Can someone please give me the detailed steps on how to do this? Please help because this is driving me crazy.
Thanks.
RyanHi,
Refer
Exceptions - How to change the colors
This may help.
Thanks,
JituK -
I need help with this script please ASAP
So I need this to work properly, but when ran and the correct answer is chosen the app quits but when the wrong answer is chosen the app goes on to the next question. I need help with this ASAP, it is due tommorow. Thank you so much for the help if you can.
The script (Sorry if it's a bit long):
#------------Startup-------------
display dialog "Social Studies Exchange Trviva Game by Justin Parzik" buttons {"Take the Quiz", "Cyaaaa"} default button 1
set Lolz to (button returned of the result)
if Lolz is "Cyaaaa" then
killapp()
else if Lolz is "Take the Quiz" then
do shell script "say -v samantha Ok starting in 3…2…1…GO!"
#------------Question 1-----------
display dialog "Around age 11, many boys left their fathers to become…" buttons {"Scholars", "Warriors", "Apprentices"}
set A1 to (button returned of the result)
if A1 is "Apprentices" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#----------Question 2--------
display dialog "Most children were taught
to read so that they could understand the…" buttons {"Music of Mozart", "Bible", "art of cooking"}
set A2 to (button returned of the result)
if A2 is "Bible" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#------------Question 3---------
display dialog "In the 1730s and 1740s, a religious movement called the_______swept through the colonies." buttons {"Glorius Revolution", "Great Awakening", "The Enlightenment"}
set A3 to (button returned of the result)
if A3 is "Great Awakening" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#-----------Question 4--------
display dialog "_______ was
a famous American Enlightenment figure." buttons {"Ben Franklin", "George Washington", "Jesus"}
set A4 to (button returned of the result)
if A4 is "Ben Franklin" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#----------Question 5-------
display dialog "______ ownership gave colonists political rights as well as prosperity." buttons {"Land", "Dog", "Slave"}
set A5 to (button returned of the result)
if A5 is "Land" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#---------Question 6--------
display dialog "The first step toward guaranteeing these rights came in 1215. That
year, a group of English noblemen forced King John to accept the…" buttons {"Declaration of Independence", "Magna Carta", "Constitution"}
set A6 to (button returned of the result)
if A6 is "Magna Carta" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#----------Question 7--------
display dialog "England's cheif lawmaking body was" buttons {"the Senate", "Parliament", "King George"}
set A7 to (button returned of the result)
if A7 is "Parliament" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#--------Question 8-----
display dialog "Pariliament decided to overthrow _______ for not respecting their rights" buttons {"King James II", "King George", "King Elizabeth"}
set A8 to (button returned of the result)
if A8 is "King James II" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#--------Question 9------
display dialog "Parliament named ___ and ___ as England's new monarchs in something called ____." buttons {"William/Mary/Glorius Revolution", "Adam/Eve/Great Awakening", "Johhny/Mr.Laphalm/Burning of the hand ceremony"}
set A9 to (button returned of the result)
if A9 is "William/Mary/Glorius Revolution" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#---------Question 10-----
display dialog "After accepting the throne William and Mary agreed in 1689 to uphold the English Bill of _____." buttons {"Money", "Colonies", "Rights"}
set A10 to (button returned of the result)
if A10 is "Rights" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#---------Question 11------
display dialog "By the late 1600s French explorers had claimed the ___ River Valey" buttons {"Mississippi", "Ohio", "Hudson"}
set A11 to (button returned of the result)
if A11 is "Ohio" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#------Question 12---------
display dialog "______ was sent to ask the French to leave 'English Land'." buttons {"Johhny Tremain", "George Washington", "Paul Revere"}
set A12 to (button returned of the result)
if A12 is "George Washington" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#---------Question 13-------
display dialog "_____ proposed the Albany Plan of Union" buttons {"George Washingon", "Ben Franklin", "John Hancock"}
set A13 to (button returned of the result)
if A13 is "Ben Franklin" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#--------Question 14------
display dialog "The __________ declared that England owned all of North America east of the Mississippi" buttons {"Proclomation of England", "Treaty of Paris", "Pontiac Treaty"}
set A14 to (button returned of the result)
if A14 is "" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#-------Question 15-------
display dialog "Braddock was sent to New England so he could ______" buttons {"Command an attack against French", "Scalp the French", "Kill the colonists"}
set A15 to (button returned of the result)
if A15 is "Command an attack against French" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#------TheLolQuestion-----
display dialog "____ is the name of the teacher who runs this class." buttons {"Mr.White", "Mr.John", "Paul Revere"} default button 1
set LOOL to (button returned of the result)
if LOOL is "Mr.White" then
do shell script "say -v samantha Congratulations…you…have…common…sense"
else
do shell script "say -v alex Do…you…have…eyes?"
#------END------
display dialog "I hope you enjoyed the quiz!" buttons {"I did!", "It was horrible"}
set endmenu to (button returned of the result)
if endmenu is "I did!" then
do shell script "say -v samantha Your awesome"
else
do shell script "say -v alex Go outside and run a lap"
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end ifUse code such as:
display dialog "Around age 11, many boys left their fathers to become…" buttons {"Scholars", "Warriors", "Apprentices"}
set A1 to (button returned of the result)
if A1 is "Apprentices" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
return
end if
#----------Question 2--------
display dialog "Most children were taught to read so that they could understand the…" buttons {"Music of Mozart", "Bible", "art of cooking"}
set A2 to (button returned of the result)
if A2 is "Bible" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
return
end if
(90444) -
Need help with Printer Setup conventions
I can't get my Brother printer to print from one computer--but it prints okay from the other computer on my network. I need to know the conventions for the Printer Setup Utility.
There's a checkbox by every printer on the list. What does it mean when the checkbox is grayed out?
Some printer names appear in bold. What does that mean?
Thanx.Thank you for your reply. I appreciate your help in this and just want to understand what you're saying.
As I say, the printer is displayed in the print dialog box but the checkbox is grayed out. I'm assuming that when you say "...it can't find/see them now," you mean the print dialogue can't see them (the drivers). Your last sentence confuses me. You say, "Do you maybe have Printer Sharing enabled & they aren't actually directly connected? If so you have to reboot after turning it off." A little confusion about your antecedents here. What isn't actually connected? The printer? So I have to reboot after turning it off, "it" I suppose is the printer, is that right? I will try that. So turn printer off, reboot, turn printer on. Right?
I will describe my problem. l thought that if I understood why the checkbox was grayed out I might see what my problem was. If you want me to start another topic I can do that.
Problem: I have a network with 2 computers and the Brother
multifunction fax/printer. I'm using an Apple airport hub. The printer
and one computer (Mac tower) are connected to the airport base via
ethernet. The 2nd computer (Apple laptop) is on the wireless network.
Until recently i could print from both computers. Now I can't print from
the tower. But I can still print from the laptop.
When I try to print from the tower I get an error message that says, "Cannot print from current printer." I have rebooted, reinstalled printer drivers, checked cables, deleted printer from printer list and re-added printer all to no avail. But as I say, I can still print from the laptop which is using Airport. So the printer prints, the hub connects to the printer okay (ethernet) and I know the tower connects to the hub (I can ping the printer okay from the tower.)
I am conversing to Brother support via email and their first suggestions I have already tried. Perhaps there's some problem in the network, but I can't figure it out. Worse yet, now when I go to the Network preferences I get an error message which says, "Your network settings have been changed by another application." THIS ERROR MESSAGE WON'T GO AWAY! I can click 'okay' but it reappears. I have to force quit the System Preferences to get out. If you can help with any of these problems I surely appreciate it. -
Need help with case structures- please help :)
Hey all.
I'm currently trying to program a infrared furnace. I'm setting a temperature, subtracted my set temperature from the actual temperature (thermocouple hooked up to SCB-68), and voltage is being sent to the controller of the furnace accordingly. However, I need to hold the set temperature for a certain amount of time. I need help programming this: when the VI reads the set temperature from the thermocouple, it results in a timer running down. When the timer runs down to 0, the While Loop ends. I'm thinking case structures is most appropriate, but if you have a better suggestion, please let me know.
ThanksYou should probably implement a state machine.
The state machine would keep track of the temperature and making ajustments on a timely basis.
There is a template of a state machine is you select under the File menu > New > From Template.
You can also look under Help > Find Example > and do a search for state machine.
There are lots of state machine examples on this forum, some of which may be quite useful.
RayR -
Need help with If statement Please
Hi guys,
This is my first time posting and sorry if for some reason i post incorrectly.
I am having trouble figuring out what I am doing with my if Statement and why the compiler is giving me an error which says 'cannot find symbol';
Just incase you need to see the code here it is. And please any pointers would help me get back on track. And please dont laugh at the novice code i just started^^;
import java.util.*;
import java.text.*;
public class Student
public static void main(String[]args)
Scanner scan=new Scanner(System.in);
double std1, std2, std3, num1, num2, num3, num4;
String a, answer1, name1;
System.out.println("Welcome to _____ program, press any button to continue: ")
a=scan.nextLine();
System.out.println("Good, would you like to enter a grade for a student(y/n)?");
answer1=scan.nextLine();
if (answer1 == y)
System.out.println("Please enter the students name ");
name1=scan.nextLine();
System.out.println("Please label the test number ");
num1=scan.nextDouble();
System.out.println("Please enter the grade, "+name1+" recieved");
std1=scan.nextDouble();
if (answer1==n)
System.out.println("Thank you for trying my program ");
else
System.out.println("It's obvious you couldn't follow a simple direction good bye ");Thanks Flounder,
I'll keep in mind to edit the code the way you told me too.
As far as the code goes, what do you mean 'y' is not a string and should be a variable. All I'm trying to do is give a true false statement.
For example
if (input==y)
System.out.println("________");
And in my code it gives an error stating that y is a variable.
I dont understand why.
Thanks much for all your replies. -
Need help with configuring setup cost as variable based on quantity
Hello,
I am brand new to PP and my client has inquiry as to how they can make the setup costs variable based on the production quantity. They already have the machine and labor working correctly, so I compared the formulas for machine and labor time with that of the formula for setup time and they are not the same (in fact, setup time does not have any formula). Do I simply need to create a formula for this or are there multiple other steps? If anyone can give instruction on how to set this up it would be of great help.
Thanks,
MHCheck in the Work Center, tab Costing where Setup Time should have a formula using operation quantity / base quantity as ratio.
Setup time should be included as parameter in the standard value key.
The formula in the Capacity Tab would have only effect on the capacity evaluation, but no costs impact.
Edited by: Dario on Feb 2, 2011 7:04 PM -
Need help with a BR - Please help !
Hi,
I would please request you to help me with your ideas on achievening the below requirement. I have ideas on doing this but I am not able to put together everything to make it work. Please let me know your thoughts. Will be a great help.
Requirement:
The requirement is that if the user enters a data value for Account member "P" on the data form at any level (Top most parent level, intermediate parent levels or 0 level) it should work in the following way.
1) It needs to check at which level the user entered the value for "P". We have a relation that V = P * T. So what I thought is if I dynamically calculate the "V" value everytime for every product I should know at which place they changed it as if they change the "P" value it would change the "V" value too as both are linked. So, basically I am comparing the stored "V" value with dynamically calculated "V" value.
2) If the "V" value has been changed at that level (i.e. if stored V Dyn. V) and this condition is met then, all the descendants of that current member should get the same P value as entered by the user for the current member.
3) This should work irrespective of which parent level they enter and should start filling in the values from that level. And if they enter "P" value at 0 level members, then it should leave them as it is without overriding it and should be used in consolidation.
This is what I could think -
Please suggest changes as this is not working still as per the requirement.
FIX(..........)
IF (@ISDESC ("LB") AND "V"->@PARENT(@CURRMBR(Product)) P->@PARENT(@CURRMBR(Product)) * T->@PARENT(@CURRMBR(Product)))
P->@CURRMBR(Product) = @PARENTVAL (Product,P);
Similarly IFELSE for another condition
ENDIF
ENDFIX;
But this is not working for all the cases. Lets say I have 3 levels in my hierarchy for Product and if the users are entering at level 2 it is not working and replacing the input value with its parent value which I am not sure why as it should in first place not enter the loop only as the condition wont be met. Reason, the user changed at level 2 and not 3 so it should do nothing from what I understand.
Please let me know your thoughts.
Thanks.You can try something like this. Instead of dynamic V account add "P_Stored" member. If "P" account has data copy that data to "P_Stored" at all levels of the Product hierarchy. Based on your post I understand that Product hierarchy is evenly distributed than business rule can be like this:
FIX(@LEVMBRS("Product",2))
"P_Stored" (
IF("P_Stored" != @PARENTVAL("Product","P")
"P_Stored"=@PARENTVAL("Product","P");
"P"=@PARENTVAL("Product","P");
ENDIF
END
FIX(@LEVMBRS("Product",1))
"P_Stored" (
IF("P_Stored" != @PARENTVAL("Product","P")
"P_Stored"=@PARENTVAL("Product","P");
"P"=@PARENTVAL("Product","P");
ENDIF
END
FIX(@LEVMBRS("Product",0))
"P_Stored" (
IF("P_Stored" = "P")
/* I believe do nothing */
1==1
ELSEIF("P_Stored" != @PARENTVAL("Product","P")
"P_Stored"=@PARENTVAL("Product","P");
"P"=@PARENTVAL("Product","P");
ENDIF
END
FIX(@LEVMBRS("Product",3))
"P_Stored" (
IF("P_Stored" != "P")
"P_Stored"="P";
ENDIF
END
If Product hierarchy is ragged then code should be changed...
Regards,
Yuri
Edited by: yrozen on Oct 26, 2011 6:48 AM -
Need help with Media Players, please.
I have a mid-2007 iMac OS X 10.9.3 (Maverick) still in perfect shape, except for what I may have just messed up.
I was trying to watch a video on VeeHD and it said that I needed the VeeHD plug-in. From some research I did, I learned that the newer versions of DivX don't play well with Apple and that older versions worked better. So, I uninstalled my DivX player (and everything DivX) from my computer and installed the recommended earlier version 14. I'm still having the same problem. I use Safari as my main browser because Firefox was giving me problems with loading times and buffering.
I'm wondering what I did wrong because now, no matter what video content I try to play, I get a gray box with HTML5 in it instead of the usual "Play" button (the triangle). Once I click on HTML5, it then says FLASH and I have to click that to get the video to load. Even on YouTube. No matter what I do now, I can't get this to change back to the way it was and pages in general are taking longer to load and buffer. I tried repairing permissions. I'm afraid I may have deleted a plug-in that I shouldn't have and don't know which one.
Does anyone have any suggestions, please? I'm afraid I've put my foot in it. Also, which media players should I have or which ones are the best? Which one is the best default player? I have an updated Flash Player, Perian, VLC, Mac Media Player, DivX v.14, FLV Crunch, and Quicktime. Too many? Am I missing some? I watch videos on different sites like Firedrive, GorillaVid, BestStream, MightyUpload, YouTube, etc., I've never had any problems until I messed around with my DivX player (the only player I had trouble viewing with, until now.)
All helpful, constructive suggestions and advice will be greatly appreciated!That's exactly what it was. I had ClickToFlash downloaded. I've had it for awhile and it didn't affect any of my video watching until I uninstalled DivX. I wonder why.
Now that I understand ClickToFlash, the only thing I like about it is that it prevents videos from playing automatically when a page is loaded. But, I uninstalled it and the loading and buffering delays went away. Thanks very much!
I meant to click "This solved my problem" on your post instead of "This helped me." How can I change that? -
Okay, sorry but i need some basic help. I'm brand new to Mac. I've always just used a standard free yahoo mail account. When I go through the Mail set up, i think it's telling me i need the Plus (fee based) version of yahoo mail to do the POP thing. Is there a way to use Mail with a free email account?
flatpickit wrote:
Is there a way to use Mail with a free email account?
Mail doesn't care, itself. All Mail cares about is whether you have the numbers to plug into the setup. The free or paid thing all depends on the mail provider. Yahoo doesn't care what PC or Mac program you are using to access it. They simply block the POP access by default, and release it when they have your money.
If you use Mail with a mail provider that has free mail client access, all you have to do is plug in the server info and you'll have direct access. GMail is one of these. -
Need Help with Timeline Setup, Text won't show up in SWF
I am creating a site for one of my company's restaurants, and I have all of my pages created in flash. I have not done any Actionscript on any of the pages yet. I thought that I would just be able to create each page and take the swf files and import them into a main index page on the timeline and code from there. However, when I imported my .swf files to the library of the main flash file, none of my text showed up at all. I have added the fonts to my library and I tried breaking apart the text, but nothing has worked.
Also, I don't know how exactly to set up the timeline to link all of my pages, and I have looked in other forums and have seen people reference the online help, but I do not know where to find that!
I am a mess right now, the site needs to be up by Friday!! PLEASE HELP!So I have created all new movie clips in my index.fla file by copying all of my files from another file and pasting them into the movie clip timeline. I have placed all of my new movie clips in different layers on the index timeline, and have created keyframes 10 frames apart. I have my actions layer with frame labels for each page every ten frames (i.e. tbLabel is at frame 1 in my actions layer and the movie clip is on a different layer at frame one, restaurantLabel is at frame 10 in my actions layer and the movie clip for that page is on a different layer at frame ten, all the way up to frame 120). I haven't put any actionscript in my movieclips except for stop(); at the end of each file. My current actionscript, placed in frame 1 for my first page when the viewer goes to the site is as follows:
thunderBayBtn.addEventListener(MouseEvent.CLICK, goIndex);
restaurantBtn.addEventListener(MouseEvent.CLICK, goRestaurant);
birchBtn.addEventListener(MouseEvent.CLICK, goBirch);
menuBtn.addEventListener(MouseEvent.CLICK, goMenu);
eventBtn.addEventListener(MouseEvent.CLICK, goEventLand);
davEventBtn.addEventListener(MouseEvent.CLICK, goDavEvent);
rockEventBtn.addEventListener(MouseEvent.CLICK, goRockEvent);
pewEventBtn.addEventListener(MouseEvent.CLICK, goPewEvent);
pewEventBtn.addEventListener(MouseEvent.CLICK, goPewEvent);
giftBtn.addEventListener(MouseEvent.CLICK, goGiftCert);
downloadBtn.addEventListener(MouseEvent.CLICK, goDownload);
contestBtn.addEventListener(MouseEvent.CLICK, goContestLand);
davContestBtn.addEventListener(MouseEvent.CLICK, goDavContest);
rockPewContestBtn.addEventListener(MouseEvent.CLICK, goRockPewContest);
function goIndex(event:MouseEvent):void
gotoAndPlay(1);
function goRestaurant(event:MouseEvent):void
gotoAndPlay(10);
function goBirch(event:MouseEvent):void
gotoAndPlay(20);
function goMenu(event:MouseEvent):void
gotoAndPlay(30);
function goEventLand(event:MouseEvent):void
gotoAndPlay(40);
function goDavEvent(event:MouseEvent):void
gotoAndPlay(50);
function goRockEvent(event:MouseEvent):void
gotoAndPlay(50);
function goPewEvent(event:MouseEvent):void
gotoAndPlay(50);
function goGiftCert(event:MouseEvent):void
gotoAndPlay(90);
function goDownload(event:MouseEvent):void
gotoAndPlay(100);
function goContestLand(event:MouseEvent):void
gotoAndPlay(110);
function goDavContest(event:MouseEvent):void
gotoAndPlay(120);
function goRockPewContest(event:MouseEvent):void
gotoAndPlay(120);
However, when I go to test the movie, I get "1120 access" errors even though the buttons are named in the properties pane, however, I cannot view that in the file that conatins all of my movie clips because they are movie clips.
Also, When I go to view the movie with all of my movie clips, all of them play one on top of the other, none of them stop, and the buttons do not work.
I'm having a hard time figuring out what actionscript I need to use and where! -
I downloaded tomcat 4.1 and extracted it to my harddrive, but when i try to start up the tomcat server i get the following error.
C:\Program Files\apache-tomcat-4.1.34\bin>startup
JAVA_HOME\bin\java.exe is missing
The JAVA_HOME environment variable may not be defined correctly
This environment variable is needed to run this program
NB: JAVA_HOME should point to a JDK not a JRE
Using CATALINA_BASE: ..
Using CATALINA_HOME: ..
Using CATALINA_TMPDIR: ..\temp
Using JAVA_HOME: C:\Program Files\Java\jdk1.5.0_09;
The system cannot find the file -Dsun.io.useCanonCaches=false.
C:\Program Files\apache-tomcat-4.1.34\bin>
What do I need to do to fix this?
ClassPath: C:\Program Files\Java\jdk1.5.0_09\bin
JAVA_HOME: C:\Program Files\Java\jdk1.5.0_09;
Any ideas are greatly appreciated.Your JAVA_HOME variable does seem to be pointing to the right place.
It shouldn't have that semicolon on the end of it though. Maybe get rid of that?
The other question I would have about it is that there is a space in the variable, which might confuse matters.
Maybe try using the "shortname" for Program Files.
You can do a "dir /x c:\P*" to find out what it is.
Try setting the JAVA_HOME to c:\progra~1\java\jdk1.5.0_09
Also note that Tomcat4 is a couple of versions old now.
I would recommend Tomcat5.5 with Java1.5
Hope this helps,
evnafets -
SQL I need help with this query Please help
List the names of all the products whose weight unit measure is “Gram”. Order the list by product name. Do not use JOINS, but use the IN clause with a sub-query.
select Name
from UnitMeasure
where Name= 'Gram'
order by Name
I did this, but it seem that the requirement is different.As a guess:
Select Name from Product
where UnitMeasure in (Select Name from unitmeasure where name = 'Gram')
Andy Tauber
Data Architect
The Vancouver Clinic
Website | LinkedIn
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and "Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread. -
I need help with and Error PLEASE!!
Everytime i try to upgarde my itunes 6 to itunes 7 i get and Error Drive E:/ message and then i get a message saying The installer encountered errors before Itunes could be configured.
WHAT DO I DO? I NEED SERIOUS HELP HERE!After installing iTunes 7, it tried to update my daughter's 20G wheel iPod but failed crashing the iPod. After the crash, my daughter got a 1418 error reporting the iPod could not be restored. An iPod salesman sold her a new iPod – blaming her for screwing up her iPod, so much for sales “experts.”
Her iPod problem was merely caused by upgrading to Apple’s iTunes to version 7 with its dysfunctional built-in updater (OS = Windows XP), not by anything to do with the iPod hardware.
The fix was to uninstall the iPod in Windows/Device Manager/disk Drives and rename the c:\program files\ipod\bin\ipodservice.resources folder – thereby disabling it - uninstall iTunes v. 7, reboot and install the last iPod updater, dated 6/2006. Then restore the iPod (wiping out everything) using the 6/2006 updater. Next, reinstall iTunes ver7.1, which will report all is well with the restored iPod. (Or, buy another iPod).
Also, if the “do not disconnect” iPod message is persistent, just go into My Computer and “eject” the iPod to clear the iPod error message.
Maybe you are looking for
-
BAPI for purchase requisition with account assingment
Dear all, We have third party scenario, so while creating sales order it has to create purchase requisition.our functional consultant they configured for service po . If any body help me
-
WSUS not Downloading 2012 r2 patches
The issue I seem to have in a prod environment (WSUS on 2012r2) is, I get all server 2008 patches no issue, but the server 2012 patches, they aren't even being down loaded, I can retrieve the list from MS directly from the windows update panel. But
-
H.264 DirectShow decoding in WEC2013
We are developing a WEC2013 device based on the i.MX6 processor family. I need to be able to playback H.264 encoded video, but I can see from this page that the BSP does not support H.264. Does anyone know of any third parties that will provide H.26
-
Ipod syncing problem new computer
first I am not very familiar with ipods and itunes, but this if for my daughter. Old computer crashed windows xp, bought new computer windows vista, downloaded itunes to new computer, connects to ipod and authorized new computer, WILL NOT SYNC, notic
-
When configuring OKG8, the results analysis key is not available for entry in the view. However, results analysis key field (ABGSL) does exist in the underlining table TKKAB. This is limiting when one wants to direct postings to different GL accoun