I need help with my text tone and I have ring tone. no text tone for the 4s.

I need help with my text tone. I have ring tone no text tone. I have a 4s.

Hi Sarar2333! Let's get your text tones working again!
Here's a link with instructions how to enable and change your alert sounds for your text/notification settings on your iPhone 4S: http://vz.to/1stiF8a. You can ensure text tones are enabled by selecting a tone in the "Text Tone" setting. Let me know how that works out for you. Thanks!
AnthonyTa_VZW
Follow us on Twitter @VZWSupport

Similar Messages

Need help with my iPhone 5 and my Macbook Pro.

Need help with my iPhone 5 and my Macbook Pro. I was purchased some music on itunes at my mac. Some reason I deleted those music from both on Mac and iPhone 5. Today, I went to my iPhone iTunes store inside of iCloud to redownload my puchased. But those song won't able to sync back to my iTunes library on my Mac. Can anyone help me with that ??....
iPhone 5, iOS 6.0.1

You've posted to the iTunes Match forum, which your question does not appear to be related to. You'll get better support responses by posting to either the iTunes for Mac or iTunes for Windows forum. Which ever is more appropriate for your situation.

I have a "Contact" organization issue I need help with. I organize multiple customers under their account affiliation. I place the people with their contact info under each account name by their dept/role in the notes section of their account. I am l

I have a "Contact" organization issue I need help with. I organize multiple customers under their account affiliation. I place the people with their contact info under each account name by their dept/role in the notes section of their account. I am looking to be able to directly dial / email from this info in yet notes section located within a contact. On Blackberry, the notes area entered in a contact can connect directly but on the iPhone those numbers/emails are inactive. I am trying to avoid having to create each of these individuals as a separate contact and keep them under their account affiliation. It is easier to find them. This does not seem like that complicated of a request and hoping someone can tell me how or share an app that will enable the "notes" within a contact be "active". Hope this makes sense.

I seem to recall that this question has been asked before and I'm pretty sure that the answer is that you can't do what you want to do with the native contact app. However, there are lots of contact apps out there that pull from the built app's data but have other features. Perhaps one of them would meet your needs.

HT201318 Need help with being double charged on my icloud account when purchasing extra storage for my ipad

Need help with being double charged on my icloud account when purchasing extra storage for my ipad?

I had this same problem on my 4S. I fixed it by restoring the phone to factory defaults. Previously, I had taken the additional step of restoring from backup but, as soon as I did, the problem returned. The fix is a hassle as I now have to reinstall my apps but at least I can manage mail on the phone.
The problem also occurred on my iPad2 but I'm not restoring it as it's a serious hassle (see above) and I don't actually read much mail on the device.
As a side note, I noticed incredibly high load averages (5+ processes for 1, 5, and 15 minutes; 12+ for 1 and 5 minutes at one point) as well as CPU usage that didn't drop below 15% (apparently all user processes, system seemed to be about normal). As could be expected, this also lead to incredibly rapid battery depletion.
I can't tell what processes were hogging the CPU as neither of my devices are jailbroken and Apple doesn't seem to like 'top' much.

How do i edit my billing info if my credit card associated with apple id expired and i have a duty to app store from the time when i had the old credit card?

how do i edit my billing info if my credit card associated with apple id expired and i have a duty to app store from the time when i had the old credit card?
so the thing is a few days ago i made an app store purchase and i didn't know i was running out of money on my credit card. i realized that only when i tried to purchase another item and it didn't work. nothing special til here. the problem is that meanwhile my credit card was replaced by a new one by the bank because the old one was soon expiring. So the data associated with the old credit card no longer exist.
i tried to edit my billing info associated with my apple id in order to enter the new credit card data, but the system doesn't allow me to do that.
so i can neither pay my purchase, nor edit my info, nor access app store anymore.
what's next? any ideas? thanks

Servers down wait till status is fixed to change or add your data http://www.apple.com/support/systemstatus/

TS2756 iam using iphone 4S with win 7 PC and i cannot connect to the internet through my phone but i tried with my other 4S and it works but what should i do for the first iphone 4S???

iam using iphone 4S with win 7 PC and i cannot connect to the internet through my phone but i tried with my other 4S and it works but what should i do for the first iphone 4S???
as i said i have two iphone 4S,,,,,
1st one --- has os 5.1
2nd one has os 6.0
i tried 2nd one with carrier reliance gsm nd it works with that personal hotspot setting using USB...
but i want to connect the first 4S with carrier TATA DOCOMO GSM but its not working with the same USB feature????
plz reply asap...!!!
thnxxx in advance!!!

If not this:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
One user reported that placing the iPod in the freezer fixed the problem.
Also heating sometimes works. See:
Why can't I select my wifi settings?
A trick that works frequently with iPhones:
Settings > AirPlane Mode ON, Do Not Disturb ON
Power down and wait 5-10 minutes
Power up
Settings > AirPlane Mode OFF, Do Not Disturb OFF
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar
Then:
Does the iOS device connect to other networks? See other networks? If yes that tends to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Need help with buying graphics card and ram for MSI 865PE NEO 2-V

Hi,
I want to buy 1GB of ram for motherboard MSI 865PE NEO 2-V I need help with finding correct parts.
I also want to buy 512Mb or 1GB graphics card.
as i said before i need help with finding correct ones so they match motherboard, I would appreciate if any one would post link to cheap and fitting parts.
I found graphics card allready, i just need to know if it will fit.
the card is
NVIDIA GeForce 7600 GS (512 MB) AGP Graphics Card
Thanks for help.

here you can see test reports for your mobo:
http://www.msi.com/product/mb/865PE-Neo2-V.html#?div=TestReport

Need help with clickbios ii terminolgy and values. Z77A-GD65 / 3770k

Hello All
I recently purchased a Z77A-GD65 board and after searching I've found the differences in terminology between this and my previous Asus board but still have a couple of settings I cant find any info on.
System Specs:
motherboard: msi z77a-gd65
cpu: intel 3770k
ram: corsair vengeance 2133mhz 1.5v
psu: corsair 850w
First things first is I believe I am running in turbo oc mode. I've selected the oc genie tab on the center right of the bios screen and proceeded to change settings there. With cpu voltage on auto and vdroop set to 50% at 4.6ghz. (I'll try and get screenshots of bios settings soon)
The following are the terms I need help with:
In the my oc genie section;
1. Long duration power limit
2. Long duration maintained
3. Short duration power limit
In the main overclocking section;
4. Digital Compensation level (not in owners manual, options auto/high)
5. Cpu core ocp expander (enabled for overclock 4.5ghz+?)
In the CPU Features section;
6. long duration power limit w (does "w" stand for watts?)
7. long duration maintained s (does "s" stand for seconds?)
8. short duration power limit
9. primary plane current limit a (does "a" stand for amps?)
10. secondary plane current limit
11. primary plane turbo power limit
12. secondary plane turbo power
I know those are a lot of settings, but would appreciate any simple definitions as to what they do and recommended values for mild overclocking (4.5-4.80)
Also on my previous board (Asus P8P67 Pro) my 3770k was stable in prime95 for 18 hrs at 4.5ghz fixed 1.155v with only ram timings put in manually and LLC set to extreme.(or whatever max is called in asus bios) Voltage was fixed and everything else was defailts.

Well I'm back. Been digging around for a few days and found some answers to my questions.
First things first s that for some reason I could not adjust voltage values with the + or - symbols. Clearing cmos did not help this. I had to reflash the bios to get this functionality back as well as clearing cmos before and after the flash.
So I figured out the values in the oc genie section are the same as the normal section but only used when your using the oc genie. (numbers 1-3)
Digital compensation level and ocp expander should be set to high and enabled respectively when going for higher overclocks. (4 and 5)
Now for the rest of my questions ( 6 through 12) I have found suggested settings and some info after hours and hours of searching but still have a couple of questions about them.
Long/short duration power limit, and primary/secondary plane turbo limit. I see suggestion settings of 250 or 255. I take it this is simply max supplied watts to the chip? If so why the 250/255 values? Is that the highest the board will give? Is plane turbo limit related to the enhanced turbo stated and how much wattage can be drawn there while the other limit is for any non turbo frequencies?
Long duration maintained, I've seen 60 suggested a lot. Why is this?
There's not an over abundance of info on these boards as compared to asus so it seems info is a little less documented and video tutorials explaining things are next to none.
Any help would be appreciated. Thanks

HT4528 I need help with my I phone and I can get verizon to let me on there to talk and I will have to have my phone so that I can do what you tell me to do

I need help with my phone it is not ringing and I cant figure where in here to make it so it will something has been pushed so I cant hear any calls or texts

Not when you insist on being so impatient.
These are user to user support forums. No one here is paid to read or respond to messages.
Try explaining the issue instead of the jumbled, rambling mess of a title and we will be happy to assist.

HT4157 if i get an i pad with 3g service capability do i have to use it in order for the i pad to work or can i just use the wifi part because i don't have the extra money to pay for a data plan

if i get an i pad with 3 g service capability do i have to use it in order for the i pad to work or can i just use the wifi part because i dont have the extra money to pay for a data plan

If you do get 3G, you only use cellular when wifi is not available. You pay by the month for a 3/4G plan.
 Cheers, Tom

Need help with space between bullet and text in list

I've been trying to increase the space between my bullet and text in my list. Everytime I increase the margin-left or padding everything moves to the right but the space between the bullet and text stays the same. Would someone help me figure out what I'm doing wrong. Website is located here. http://www.webassistantsllc.com/clients/sport
Thanks
Lynne

Thanks for the help. That worked perfectly.
Another question on my bullet:
Is there a way to adjust the position of my bullet in a list? http://www.webassistantsllc.com/clients/sport
Thanks
Lynne

Need Help with External Hard drives and too much music

I am not terribly tech-savvy, and I need your help. I have a G5 PPC dual processor with an internal 250GB drive. I have two seagate firewire/USB2 external hard drives. One is 250GB and one is 350GB. I want to know how to use them to get my Mac to run faster and better.
My original hard drive is 7GB shy of being full. Almost half of this is my itunes library which is over 100GB. The older (250GB) hard drive has about 150GB of photos/videos.
My Mac is running slow as molasses and when I power up the external hard drives it slows down to what I recall my original Mac Plus ran like.
I use the G5 primarily to work with photos, illustrations and creating the occasional DVD with video and photos. the apps I use most often are Photoshop, Illustrator and Painter. I always listen to music while work.
I hope all of this information is helpful! Here is my question:
What is the best way for me to set up and use these external hard drives to return my G5 to its original blazing (to me) fast speed?
PPC G5 Mac OS X (10.4.9)

I think you should look at adding two 500GB internal drives. I'd say Maxtor MaxLine Pro for cost, but they also run much warmer (43ºC even when nearly doing zilch) so I'd go with WD RE2 500GB for $40 ea. more.
dump whatever you don't need, trash anything that is hogging space and is just temp file or useless cache. Web browsers can leave behind a ton of small files eating up tens of MBs.
Use SuperDuper to backup/clone your drive.
Disk Warrior 4 to repair (after it gets to 15% free, or just forget for now).
A 250GB drive formats to 240GB and you have ~3% free it looks like.
For every data drive plan to have two backup drives.
Keep your boot drive to 40% used.
And your data drive to 60%.
Backups can go a little higher.
Drives are cheap and inexpensive, especially for the space and performance. And they have improved SATA over the years it has been out.
By doing a backup followed by erasing your drive, and then restoring it, using SuperDuper, which optimizes the organization, skips copying temp files that aren't needed, it also defragments your files. I would do backup daily to different sets that you "rotate." And before any OS update. And do the erase and restore probably every 2 months.
Make sure you keep one drive partition somewhere that is just your disk utility emergency boot drive that is not a copy of working system, used for doing repairs like running Disk Warrior and Disk Utility.
You may need to repair; backup; even erase and restore your external drives. Rather than spend on vendor made case, just pick up a good FireWire case either with drive, or bare (and add your own). I think it'd add 500GB FW drive though.
Why?
To begin backup of your current drive. To leave your other FW drives "as is" for now.
Then install a new internal 500GB drive as well so you now have a good current backup, and you have moved your data off 250GB to 500GB. If anything happens, you have one off line FW backup.
Then begin to clean up, organize, and get your FW drives working. It sure sounds like they have had some directory or file problems.
You can find a lot of Firewire and SATA drive choices over at OWC:
http://www.macsales.com/firewire/

Need help with gallery showing .jpg AND .swf

Hi all,
I have an image gallery that loads images and swf-files from an XML-file. The .jpg's load and display just fine, but the .swf files won't show. The data is loaded though. Any help is greatly appreciated!
Thanks so much in advance,
Dirk
My XML file looks like this:
<?xml version="1.0" encoding="UTF-8" ?>
- <slideshow>
<image src="photo1.jpg" time="1" title="test" desc="test" artist="sabre" link="" target="_self" />
<image src="photo2.jpg" time="3" title="test2" desc="test2desc" artist="sabre" link="" target="_self" />
<image src="flash1.swf" time="2" title="test3" desc="test3desc" artist="sabre" link="" target="_self" />
</slideshow>
And the AS3:
// import tweener
import caurina.transitions.Tweener;
// delay between slides
const TIMER_DELAY:int = 5000;
// fade time between slides
const FADE_TIME:Number = 1;
// flag for knowing if slideshow is playing
var bolPlaying:Boolean = true;
// reference to the current slider container
var currentContainer:Sprite;
// index of the current slide
var intCurrentSlide:int = -1;
// total slides
var intSlideCount:int;
// timer for switching slides
var slideTimer:Timer;
// slides holder
var sprContainer1:Sprite;
var sprContainer2:Sprite;
// slides loader
var slideLoader:Loader;
// current slide link
var strLink:String = "";
// current slide link target
var strTarget:String = "";
// url to slideshow xml
var strXMLPath:String = "xml.xml";
// slideshow xml loader
var xmlLoader:URLLoader;
// slideshow xml
var xmlSlideshow:XML;
function initSlideshow():void {
// hide buttons, labels and link
mcInfo.visible = false;
btnLink.visible = false;
var request:URLRequest = new URLRequest (strXMLPath);
request.method = URLRequestMethod.POST;
var variables:URLVariables = new URLVariables();
variables.memberID = root.loaderInfo.parameters.memberID;
request.data = variables;
var loader:URLLoader = new URLLoader (request);
loader.addEventListener(Event.COMPLETE, onXMLLoadComplete);
loader.dataFormat = URLLoaderDataFormat.VARIABLES;
loader.load(request);
// create new timer with delay from constant
slideTimer = new Timer(TIMER_DELAY);
// add event listener for timer event
slideTimer.addEventListener(TimerEvent.TIMER, nextSlide);
// create 2 container sprite which will hold the slides and
// add them to the masked movieclip
sprContainer1 = new Sprite();
sprContainer2 = new Sprite();
mcSlideHolder.addChild(sprContainer1);
mcSlideHolder.addChild(sprContainer2);
// keep a reference of the container which is currently
// in the front
currentContainer = sprContainer2;
// add event listeners for buttons
btnLink.addEventListener(MouseEvent.CLICK, goToWebsite);
btnLink.addEventListener(MouseEvent.ROLL_OVER, showDescription);
btnLink.addEventListener(MouseEvent.ROLL_OUT, hideDescription);
mcInfo.btnPlay.addEventListener(MouseEvent.CLICK, togglePause);
mcInfo.btnPause.addEventListener(MouseEvent.CLICK, togglePause);
mcInfo.btnNext.addEventListener(MouseEvent.CLICK, nextSlide);
mcInfo.btnPrevious.addEventListener(MouseEvent.CLICK, previousSlide);
// hide play button
mcInfo.btnPlay.visible = false;
function onXMLLoadComplete(e:Event):void {
// show buttons, labels and link
mcInfo.visible = true;
btnLink.visible = true;
// create new xml with the received data
xmlSlideshow = new XML(e.target.data);
var unesc_xmlSlideshow:XML = new XML(unescape(xmlSlideshow));
// get total slide count
intSlideCount = unesc_xmlSlideshow..image.length();
// switch the first slide without a delay
switchSlide(0);
function fadeSlideIn(e:Event):void {
var unesc_xmlSlideshow:XML = new XML(unescape(xmlSlideshow));
// add loaded slide from slide loader to the
// current container
addSlideContent();
// clear preloader text
mcInfo.lbl_loading.text = "";
// check if the slideshow is currently playing
// if so, show time to the next slide. If not, show
// a status message
if(bolPlaying) {
mcInfo.lbl_loading.text = "Next slide in " + unesc_xmlSlideshow..image[intCurrentSlide].@time + " sec.";
} else {
mcInfo.lbl_loading.text = "Slideshow paused";
// fade the current container in and start the slide timer
// when the tween is finished
Tweener.addTween(currentContainer, {alpha:1, time:FADE_TIME, onComplete:onSlideFadeIn});
function onSlideFadeIn():void {
// check, if the slideshow is currently playing
// if so, start the timer again
if(bolPlaying && !slideTimer.running)
slideTimer.start();
function togglePause(e:MouseEvent):void {
var unesc_xmlSlideshow:XML = new XML(unescape(xmlSlideshow));
// check if the slideshow is currently playing
if(bolPlaying) {
// show play button
mcInfo.btnPlay.visible = true;
mcInfo.btnPause.visible = false;
// set playing flag to false
bolPlaying = false;
// set status message
mcInfo.lbl_loading.text = "Slideshow paused";
// stop the timer
slideTimer.stop();
} else {
// show pause button
mcInfo.btnPlay.visible = false;
mcInfo.btnPause.visible = true;
// set playing flag to true
bolPlaying = true;
// show time to next slide
mcInfo.lbl_loading.text = "Next slide in " + unesc_xmlSlideshow..image[intCurrentSlide].@time + " sec.";
// reset and start timer
slideTimer.reset();
slideTimer.start();
function switchSlide(intSlide:int):void {
// check if the last slide is still fading in
if(!Tweener.isTweening(currentContainer)) {
// check, if the timer is running (needed for the
// very first switch of the slide)
if(slideTimer.running)
   slideTimer.stop();
// change slide index
intCurrentSlide = intSlide;
// check which container is currently in the front and
// assign currentContainer to the one that's in the back with
// the old slide
if(currentContainer == sprContainer2)
   currentContainer = sprContainer1;
else
   currentContainer = sprContainer2;
// hide the old slide
currentContainer.alpha = 0;
// bring the old slide to the front
mcSlideHolder.swapChildren(sprContainer2, sprContainer1);
// delete loaded content
clearLoader();
// create a new loader for the slide
slideLoader = new Loader();
// add event listener when slide is loaded
slideLoader.contentLoaderInfo.addEventListener(Event.COMPLETE, fadeSlideIn);
// add event listener for the progress
slideLoader.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS, showProgress);
var unesc_xmlSlideshow:XML = new XML(unescape(xmlSlideshow));
// load the next slide, seems to f*ck up here...
slideLoader.load(new URLRequest(unesc_xmlSlideshow..image[intCurrentSlide].@src));
// show description of the next slide
mcInfo.lbl_description.text = unesc_xmlSlideshow..image[intCurrentSlide].@title;
// show artist's name of the next slide
mcInfo.lbl_artist.text = unesc_xmlSlideshow..image[intCurrentSlide].@artist;
// set link and link target variable of the slide
strLink           = unesc_xmlSlideshow..image[intCurrentSlide].@link;
strTarget          = unesc_xmlSlideshow..image[intCurrentSlide].@target;
mcInfo.mcDescription.lbl_description.htmlText = unesc_xmlSlideshow..image[intCurrentSlide].@desc;
// show current slide and total slides
//mcInfo.lbl_count.text = (intCurrentSlide + 1) + " / " + intSlideCount + " Slides";
mcInfo.lbl_count.text = " Slide " + (intCurrentSlide + 1) + " / " + intSlideCount;
function showProgress(e:ProgressEvent):void {
// show percentage of the bytes loaded from the current slide
mcInfo.lbl_loading.text = "Loading..." + Math.ceil(e.bytesLoaded * 100 / e.bytesTotal) + "%";
function goToWebsite(e:MouseEvent):void {
// check if the strLink is not empty and open the link in the
// defined target window
if(strLink != "" && strLink != null) {
navigateToURL(new URLRequest(strLink), strTarget);
function nextSlide(e:Event = null):void {
// check, if there are any slides left, if so, increment slide
// index
if(intCurrentSlide + 1 < intSlideCount)
switchSlide(intCurrentSlide + 1);
// if not, start slideshow from beginning
else
switchSlide(0);
function previousSlide(e:Event = null):void {
// check, if there are any slides left, if so, decrement slide
// index
if(intCurrentSlide - 1 >= 0)
switchSlide(intCurrentSlide - 1);
// if not, start slideshow from the last slide
else
switchSlide(intSlideCount - 1);
function showDescription(e:MouseEvent):void {
// remove tweens
Tweener.removeTweens(mcInfo.mcDescription);
// fade in the description
Tweener.addTween(mcInfo.mcDescription, {alpha:1, time:0.5, y: -1});
function hideDescription(e:MouseEvent):void {
// remove tweens
Tweener.removeTweens(mcInfo.mcDescription);
// fade out the description
Tweener.addTween(mcInfo.mcDescription, {alpha:0, alpha:1, time:0.5, y: 30});
function clearLoader():void {
try {
// get loader info object
var li:LoaderInfo = slideLoader.contentLoaderInfo;
// check if content is bitmap and delete it
if(li.childAllowsParent && li.content is Bitmap){
   (li.content as Bitmap).bitmapData.dispose();
} catch(e:*) {}
function addSlideContent():void {
// empty current slide and delete previous bitmap
while(currentContainer.numChildren){Bitmap(currentContainer.getChildAt(0)).bitmapData.disp ose(); currentContainer.removeChildAt(0);}
// create a new bitmap with the slider content, clone it and add it to the slider container
var bitMp:Bitmap = new Bitmap(Bitmap(slideLoader.contentLoaderInfo.content).bitmapData.clone());
currentContainer.addChild(bitMp);
// init slideshow
initSlideshow();

I'm sorry, you're right! Didn't intend to be lazy...
This line loads the image in the loader 'slideLoader'. This seems to work fine with image files (.jpg), but .swf files are ignored. Is it possible to load both .jpg AND .swf files in a loader, or do I have to use some other method for this?
slideLoader.load(new URLRequest(unesc_xmlSlideshow..image[intCurrentSlide].@src));
Thanks again,
Dirk

Need help with ext. SWF and XML

I'm trying to create an External SWF to load into my main
site (photography).
Home | Portfolio | Published Work | Bio | Contact
The SWF I want to load externally is Portfolio because it has
5 sections
Those 5 sections are:
-Editorial
-Adventure
-Fly Fishing
-Multimedia
-Weddings
I'm looking to keep this dynamic as possible, but I'm one of
those guys who doesn't write code from scratch, but knows AS well
enough to modify a base or a generic template if ever given. It
would be easier to use one subsection as an example, which could be
applied to all others.
e.g. "Fly Fishing" 1-Main container; 5-10 thumbnails (1
dyanamic thumbnailcontainer)
- I don't know XML (but can modify it). basically having an
ID tag for each image, possibly dynamically generate a thumbnail
too. Also have a spot for dynamic text to load in (captions with
multiple text lines for images upon onRelease - maybe this could be
it's own MC that loads on top of the main photo container)
- on (release) on a thumbnail: there would be a little
information icon that would appear. If you mouse over, it would
overlay a layer over that specific ID photo, and the text appear.
RollOut it would fade out the layer above that specific ID photo.
- Transition: FadeOut/Blur/Exposure Blur, something
interesting to that nature.
- Thumbnails: is it just easier to create thumbnail images
manually, and just create a separate container?
- Image folders: I would imagine each section would have
it's own watch folder. For example "Fly Fishing" would be a folder
"/swfImg_flyFishing/", but perhaps having one XML file.
- XML file details
id
location
caption summary
title
As you can see, if I had one template to build off of, I
could repeat it self for the others. I need help and if there is a
flash component (free or purchase) that does at least 70% of what I
need, please share information. thank you!Portfolio

I know doing a pushback to the client requires Flex Data
Services, but since I don't use FDS I can't tell you exactly how.
But look in the documentation about "pushing" data to the client.
Once you've figured out how to do that, you can trigger that push
once you've finished editing the xml file. You may want to ask over
in the FDS forum.

Need help with Bootcamp 1.2 and firmware on my MB

Boot Camp Assistant 1.1 was working fine but I decided to update it with version 1.2 for the new drivers after it came out. I trashed the Boot Camp Assistant.app from the utilities folder and ran the 1.2 installer. The upgrade appeared to go fine but when I run Boot Camp Assistant.app I only get "Boot Camp Assistant cannot be used: You must update your computer's boot ROM firmware before using this setup assistant".
When I check the FW on my MB I find that I have:
Boot ROM Version: MB11.0061.B02
SMC Version: 1.4f12
When I look on Apple's support pages I find that the latest Boot ROM version for my machine is MB11.0061.B03. I guessed that this is why Boot Camp 1.2 was not working but didn't understand why I had not received any update message from the automatic update utility.
I decided to manually update the firmware and downloaded the appropriate file from http://www.apple.com/support/downloads/macbookefifirmwareupdate10.html
My surprise was big when I was going to run the update and I got "ALERT: This computer does not need this update".
I don't know what to do now. I have tried to reinstall Boot Camp 1.2 without been able to run it. Why cannot I update to MB11.0061.B03?
I appreciate your help. Thanks a lot.

I have been trying to find the place where it says that the firmware update must be applied before bootcamp and I really don't find this info. Could you please point me to where you have read this information?
To re-install OS-X is a painfull process for me because I don't have access to all the appz that I have installed from where I am at the momment, I would have to wait to come back to my work base and ask for the CDs again and this is not possible until maybe 4 months.
I really think that re-partitioning and re-installing everything just for installing a firmware update is really extreme. I could delete the XP partition using Boot Camp assistant 1.1.2b after moving it from the trash (it still works) for putting my drive as it was before bootcamp and try the FW update then, but what confuses me is why am I getting a "Your computer does not need this update" message in stead of "There is a problem trying to install this update"?.
Thank you very much.

I need help with my text tone and I have ring tone. no text tone for the 4s.

Similar Messages

Maybe you are looking for