I need help with my wifi sync, please?

I am trying to sync a single band from my laptop to my iPhone. This is my new laptop and I have no transfered all my music from my old computer onto here, so I can not sync through the cable or else I will have to remove all my exsisting information on my phone, I do not have all my music on my laptop yet. All I want is to simply transfer a few songs from my iTunes to my phone wirelessly and I can't. I enabled the button when I plug in my phone that tells me I can sync wirelessly but when I disconnect it refuses to work. Please I need help.

Dear friend, by the moment Blackberry playbook is just for USA/Canada users, in a very short time RIM will announce the release of the product for the rest of countries.
Be patient when you can use it at 100%, you will be amazed!

Similar Messages

Need help with threads?.. please check my approach!!

Hello frnds,
I am trying to write a program.. who monitors my external tool.. please check my way of doing it.. as whenever i write programs having thread.. i end up goosy.. :(
first let me tell.. what I want from program.. I have to start an external tool.. on separate thread.. (as it takes some time).. then it takes some arguments(3 arguments).. from file.. so i read the file.. and have to run tool.. continously.. until there are arguments left.. in file.. or.. user has stopped it by pressing STOP button..
I have to put a marker in file too.. so that.. if program started again.. file is read from marker postion.. !!
Hope I make clear.. what am trying to do!!
My approach is like..
1. Have two buttons.. START and STOP on Frame..
START--> pressed
2. check marker("$" sign.. placed in beginning of file during start).. on file..
     read File from marker.. got 3 arg.. pass it to tool.. and run it.. (on separate thread).. put marker.. (for next reading)
     Step 2.. continously..
3. STOP--> pressed
     until last thread.. stops.. keep running the tool.. and when last thread stops.. stop reading any more arguments..
Question is:
1. Should i read file again and again.. ?.. or read it once after "$" sign.. store data in array.. and once stopped pressed.. read file again.. and put marker ("$" sign) at last read line..
2. how should i know when my thread has stopped.. so I start tool again??.. am totally confused.. !!
please modify my approach.. if u find anything odd..
Thanks a lot in advance
gervini

Hello,
I have no experience with threads or with having more than run "program" in a single java file. All my java files have the same structure. This master.java looks something like this:
---master.java---------------------------------------------------
import java.sql.*;
import...
public class Master {
public static void main(String args []) throws SQLException, IOException {
//create connection pool here
while (true) { // start loop here (each loop takes about five minutes)
// set values of variables
// select a slave process to run (from a list of slave programs)
execute selected slave program
// check for loop exit value
} // end while loop
System.out.println("Program Complete");
} catch (Exception e) {
System.out.println("Error: " + e);
} finally {
if (rSet1 != null)
try { rSet1.close(); } catch( SQLException ignore ) { /* ignored */ }
connection.close();
-------end master.java--------------------------------------------------------
This master.java program will run continuously for days or weeks, each time through the loop starting another slave process which runs for five minutes to up to an hour, which means there may be ten to twenty of these slave processes running simultaneously.
I believe threads is the best way to do this, but I don't know where to locate these slave programs: either inside the master.java program or separate slave.java files? I will need help with either method.
Your help is greatly appreciated. Thank you.
Logan

Need help with flash player installation please !!!!

Hello,
I need help with my flash player installation because every time I access a movie this is the message I receive.
This content on Xfinity TV is not available for viewing with Chrome's "Incognito" mode. To play this video using Chrome, please view this page without "Incognito" mode.
Still having problems? Try resetting your Flash player license.

Incognito mode is a Google Chrome setting when you open a new window (Cmd+Shift+N on a Mac Ctrl+Shift+N on Windows) It opens a "private" window with no cookies and no tracking. The problem with it is that when you disable cookies, your license files are not sent to the site (whetehr it's YouTube or xFinity or any other that uses license files for paid content) and it treats you as if you're a first time visitor. Paid videos won't play wihtout the cookies sending the license file info.
This isn't a Flash Player setting. It's in Chrome. I did some research and according to Google, "Incignito" mode is off by default, and can ONLY be activate by the keyboard shortcut. There IS a way to disable it from the registry http://dev.chromium.org/administrators/policy-list-3#IncognitoModeAvailability

I need help with my wifi text. I can't use them

I need help with my iPhone 4. I can't text since. I get wifi in my house ?

What is the make & model of the wireless router that you are trying to extend with the WN3000RP? Can any other wireless clients connect to the extended network, just not your iMac?

I need help with printing labels. please

I need help with printing labels. thanks in advance

Welcome to Apple Support Communities.
In Address Book, first select a name or group of names to print.
Then File, Print, select Style, Mailing Labels, then Layout to select a specific target label (such as an Avery number), or define your own...

Need Help with Migration...Please

Hello,
I need help! I just bought a new MacBook Pro. In house, I have a two year old iMac running Mavericks (all updated) and an iPhone and iPad (both running the most current OS). I also have the iMac connected to a Time Capsule. Here are my questions:
1. As I am not replacing the iMac, but rather adding a MacBook Pro to the mix, should I migrate the software, settings, files, etc. from the iMac to the MacBook? Is there an issue running computers which are clones in the same environment? Is it a bad idea to migrate?
2. Assuming # 1 is okay to migrate, what is the best way? Is it best directly from the iMac or from the Time Capsule? I do have a Thunderbolt to Ethernet adapter on hand.
3. Is there a link that would help me navigate the migration?
4. How long should the migration in #2 take?
5. Will I need to change any settings on the iMac, iPhone, or iPad afterwards?
6. Will my contacts and calendar sync with iCloud automatically, or do I have to change a setting on the MacBook to make that happen?
7. Also, as I'm leaving town tomorrow and want to take the MacBook Pro with me and I'm unsure I've the time to Migrate and tweak, can I jus turn on the MacBook (still not turned on), use it as it is, and then migrate when I get back home?
Any help would greatly be appreciated. Thank you!

Hello,
I need help! I just bought a new MacBook Pro. In house, I have a two year old iMac running Mavericks (all updated) and an iPhone and iPad (both running the most current OS). I also have the iMac connected to a Time Capsule. Here are my questions:
1. As I am not replacing the iMac, but rather adding a MacBook Pro to the mix, should I migrate the software, settings, files, etc. from the iMac to the MacBook? Is there an issue running computers which are clones in the same environment? Is it a bad idea to migrate?
2. Assuming # 1 is okay to migrate, what is the best way? Is it best directly from the iMac or from the Time Capsule? I do have a Thunderbolt to Ethernet adapter on hand.
3. Is there a link that would help me navigate the migration?
4. How long should the migration in #2 take?
5. Will I need to change any settings on the iMac, iPhone, or iPad afterwards?
6. Will my contacts and calendar sync with iCloud automatically, or do I have to change a setting on the MacBook to make that happen?
7. Also, as I'm leaving town tomorrow and want to take the MacBook Pro with me and I'm unsure I've the time to Migrate and tweak, can I jus turn on the MacBook (still not turned on), use it as it is, and then migrate when I get back home?
Any help would greatly be appreciated. Thank you!

Need help with my iphone syncing to itunes

I have recently got a new computer (no access to old one) downloaded itunes and bought about 35 songs now it won't let me sync them to my iphone without deleting everything else on the iphone around 3000 songs how can i stop this
thanks in advance

Hello there Tami P.,
I was thinking either one of a few things here. You may need to open the Music tab in the iPhone device window and select the music you want to sync over to the phone. Use this article to help with that if needed:
iOS: Syncing with iTunes
http://support.apple.com/kb/ht1386.
Also you may need to associate the device with your Apple ID then try syncing again. Use this article to help with that:
iTunes Store: Associating a device or computer to your Apple ID
http://support.apple.com/kb/ht4627
If all else fails, I would recommend restorign the phone through iTunes.
iTunes: Restoring iOS software
http://support.apple.com/kb/ht1414
All the very best,
Sterling

Need Help with new site glitches PLEASE!!!

I need help trouble shooting a website. The site is
www.farrowandwatkins.com. Nav buttons on Mac they display correctly
which is aligned at top and bottom of content to left on Home page.
However, when viewed on PC, the buttons spread to fill the
distance of the "Patients" Page. All the pages spread to this
length also, but are not suppose to.
Nav buttons have padding of 10 on bottom, except last one.
Please help if you can

First guess would be that there doesn't seem to be a fixed
height or width on the cell for the 'patients' button.

I need help with the https class please.

Hello, i need add an authentication field in my GET request using HTTPS to authenticate users. I put the authentication field using the setRequestProperty method, but it doesn't appear when i print all properties using the getRequestProperties method. I wrote the following code:
try{
URL url = new URL ("https://my_url..");
URLConnection conexion;
conexion = url.openConnection();
conexion.setRequestProperty("Authorization",my_urlEncoder_string);
conexion.setRequestProperty("Host",my_loginServer);
HttpsURLConnection httpsConexion = (HttpsURLConnection) conexion;
httpsConexion.setRequestMethod("GET");
System.out.println("All properties\r\n: " + httpsConexion.getRequestProperties());
}catch ....
when i run the program it show the following text:
All properties: {Host=[my_loginServer]}
Only the Host field is added to my HttpsURLConnection. The authentication field doesnt appear in standar output. How can i add to my HttpsURLConnection an Authentication field?
thanks

I have moved this to the main Dreamweaver forum, as the other forum is intended to deal with the Getting Started video tutorial.
The best way to get help with layout problems is to upload the files to a website and post the URL in the forum. Someone can then look at the code, and identify the problem. Judging from your description, it sounds as though the Document window is narrow, which would result in the final menu tab dropping down to the next row. Try turning on Live view or previewing the page in a browser. Design view gives only an approximate idea of the final layout. Live view renders the page as it should look in a browser.

I just bought my MacBook Pro 13" and I tried to install an anti virus but then it went into a grey folder with a question mark I need help with restoring the iOS please

I need help taking out the grey folder with the question mark and I've try everything except the CD thing because my MacBook didn't come with one so I really need help please

What anti-virus software did you install? Although there's a lot of bad anti-virus software out there, no anti-virus software should cause such a problem. A gray screen with a flashing question mark on a folder means that no bootable system could be found, which means that the system was badly damaged or corrupt. Even installing bad software would not normally cause that, so either there was something badly wrong with the system already or the anti-virus software you tried to install was really, really bad!
As mende1 says, you need to reinstall the system at this point. After your system is back up and running, read my Mac Malware Guide. If, after reading that, you want anti-virus software, use one of the programms recommended in that guide.

TS4062 Help with itunes wifi sync

the itunes wifi sync icon is gray "not active" in the iphone device although i did everything ,set the fire wall, enable the wifi synicin the device but I still can't work with this service

Smart playlists are not working correctly in iTunes 9.
Also, your playlist is kinda messed up.
Try this...
Match all;
Playlist is Music
Date added is after ##/##/####
Time - is less than - 30:00 (do you have any songs longer than 30 minutes? If not, delete this)
Live updating enabled
++++
I would not use these...
Genre - does not contain - Podcast
Genre - does not contain - Audiobook
Genre - does not contain - TV Shows
Use *Kind does not contain* instead of *Genre does not contain* because the Genre may not be a podcast or TV Show or Audiobook.

I need help with the navigation menu please?

I have been working my way through your six part printed instructions and I am styling the header and navigation menu. The bullet points disappeared which was correct and the tabs moved to the right, as they should, but one tab sits underneath another tab and all tabs are covered up by my main heading. This is dreamweaver CS6.
It looks a bit of a mess!

I have moved this to the main Dreamweaver forum, as the other forum is intended to deal with the Getting Started video tutorial.
The best way to get help with layout problems is to upload the files to a website and post the URL in the forum. Someone can then look at the code, and identify the problem. Judging from your description, it sounds as though the Document window is narrow, which would result in the final menu tab dropping down to the next row. Try turning on Live view or previewing the page in a browser. Design view gives only an approximate idea of the final layout. Live view renders the page as it should look in a browser.

I need help with website can you please

Need help
Message was edited by: Liam Dilley - Phone number in here is a bad idea

Hi,
I removed your phone number as you will just get cold called
BC support does not call you for help and people here can help you here. Just saying "need help" is not much use though, we need to know what kind of help you need.

Need help with iphone battery charging please

hey all,
i have a problem with charging iphone battery,
i´ve had the phone for 8months now with no problems at all,
yesterday i used it as a modem for connecting to the internet and it worked just fine but the battery died so quick and now it wont charge at all
i used both charge connector and USB drive in the computer - nothing works, i already tried resseting it several times - didnt work either, i also tried plugging in a different cable - thta didnt help either so its basically turned into a brick, i noticed tho when i try to restart it there´s a couple wierd lines on my display but then it doesnt turn on or anything, it goes back to a black screen with battery picture and one red line indicating i need to charge it...
i tried to charge it overnight but the red line on the battery pic doesnt move or anything, there´s no sign of it charging at all and it doesnt even want to sync with the computer, i dont know what else to try
please help someone
thankyou
Message was edited by: LailaGerard

The iPhone includes a one year warranty.
If you are in a country where Apple provides direct support and has an Apple store, you can contact Apple or make an appointment at an Apple store if there is one nearby.
If you live an a country where Apple doesn't provide direct support - support for the iPhone is handled by the official carrier for the iPhone, contact your carrier.

New to Java and need help with this program..please!

I'd really appreciate any helpful comments about this program assignment that I have to turn in a week from Friday. I'm taking a class one night a week and completely new to Java. I'd ask my professor for help, but we can't call him during the week and he never answers e-mails. He didn't tell us how to call from other classes yet, and I just can't get the darn thing to do what I want it to do!
The assignment requirements are:
1. Change a card game application that draws two cards
and the higher card wins, to a Blackjack application
2. Include a new class called Hand
3. The Hand class should record the number of draws
4. The application should prompt for a number of draws
5. The game is played against the Dealer
6. The dealer always draws a card if the dealer's hand total is <= 17
7. Prompt the player after each hand if he wants to quit
8. Display the total games won by the dealer and total and the total games wond by the player after each hand
9. Display all of the dealer's and player's cards at the
end of each hand
10. Player has the option of drawing an additional card after the first two cards
11. The Ace can have a value of 11 or 1
(Even though it's not called for in the requirements, I would like to be able to let the Ace have a value of 1 or an 11)
The following is my code with some comments about a few things that are driving me nuts:
import java.util.*;
import javax.swing.*;
import java.text.*;
public class CardDeck
public CardDeck()
deck = new Card[52];
fill();
shuffle();
public void fill()
int i;
int j;
for (i = 1; i <= 13; i++)
for (j = 1; j <= 4; j++)
deck[4 * (i - 1) + j - 1] = new Card(i, j);
cards = 52;
public void shuffle()
int next;
for (next = 0; next < cards - 1; next++)
int rand = (int)(Math.random()*(next+1));
Card temp = deck[next];
deck[next] = deck[rand];
deck[rand] = temp;
public final Card draw()
if (cards == 0)
return null;
cards--;
return deck[cards];
public int changeValue()
int val = 0;
boolean ace = false;
int cds;
for (int i = 0; i < cards; i++)
if (cardValue > 10)
cardValue = 10;
if (cardValue ==1)     {
ace = true;
val = val + cardValue;
if ( ace = true && val + 10 <= 21 )
val = val + 10;
return val;
public static void main(String[] args)
CardDeck d = new CardDeck();
int x = 3;
int i;
int wins = 1;
int playerTotal = 1;
do {
Card dealer = (d.draw());
/**I've tried everything I can think of to call the ChangeValue() method after I draw the card, but nothing is working for me.**/
System.out.println("Dealer draws: " + dealer);
do {
dealer = (d.draw());
System.out.println(" " + dealer);
}while (dealer.rank() <= 17);
Card mine = d.draw();
System.out.println("\t\t\t\t Player draws: "
+ mine);
mine = d.draw();
System.out.println("\t\t\t\t\t\t" + mine);
do{
String input = JOptionPane.showInputDialog
("Would you like a card? ");
if(input.equalsIgnoreCase("yes"))
     mine = d.draw();
System.out.println("\t\t\t\t\t\t" + mine);
     playerTotal++;
     else if(input.equalsIgnoreCase("no"))
System.out.println("\t\t\t\t Player stands");
     else
System.out.println("\t\tInvalid input.
Please try again.");
I don't know how to go about making and calling a method or class that will combine the total cards delt to the player and the total cards delt to the dealer. The rank() method only seems to give me the last cards drawn to compare with when I try to do the tests.**/
if ((dealer.rank() > mine.rank())
&& (dealer.rank() <= 21)
|| (mine.rank() > 21)
&& (dealer.rank() < 22)
|| ((dealer.rank() == 21)
&& (mine.rank() == 21))
|| ((mine.rank() > 21)
&& (dealer.rank() <= 21)))
System.out.println("Dealer wins");
wins++;
     else
System.out.println("I win!");
break;
} while (playerTotal <= 1);
String stop = JOptionPane.showInputDialog
("Would you like to play again? ");
if (stop.equalsIgnoreCase("no"))
break;
if (rounds == 5)
System.out.println("Player wins " +
(CardDeck.rounds - wins) + "rounds");
} while (rounds <= 5);
private Card[] deck;
private int cards;
public static int rounds = 1;
public int cardValue;
/**When I try to compile this nested class, I get an error message saying I need a brace here and at the end of the program. I don't know if any of this code would work because I've tried adding braces and still can't compile it.**/
class Hand()
static int r = 1;
public Hand() { CardDeck.rounds = r; }
public int getRounds() { return r++; }
final class Card
public static final int ACE = 1;
public static final int JACK = 11;
public static final int QUEEN = 12;
public static final int KING = 13;
public static final int CLUBS = 1;
public static final int DIAMONDS = 2;
public static final int HEARTS = 3;
public static final int SPADES = 4;
public Card(int v, int s)
value = v;
suit = s;
public int getValue() { return value; }
public int getSuit() { return suit; }
public int rank()
if (value == 1)
return 4 * 13 + suit;
else
return 4 * (value - 1) + suit;
/**This works, but I'm confused. How is this method called? Does it call itself?**/
public String toString()
String v;
String s;
if (value == ACE)
v = "Ace";
else if (value == JACK)
v = "Jack";
else if (value == QUEEN)
v = "Queen";
else if (value == KING)
v = "King";
else
v = String.valueOf(value);
if (suit == DIAMONDS)
s = "Diamonds";
else if (suit == HEARTS)
s = "Hearts";
else if (suit == SPADES)
s = "Spades";
else
s = "Clubs";
return v + " of " + s;
private int value; //Value is an integer, so how can a
private int suit; //string be assigned to an integer?
}

Thank you so much for offering to help me with this Jamie! When I tried to call change value using:
Card dealer = (d.changeValue());
I get an error message saying:
Incompatible types found: int
required: Card
I had my weekly class last night and the professor cleared up a few things for me, but I've not had time to make all of the necessary changes. I did find out how toString worked, so that's one question out of the way, and he gave us a lot of information for adding another class to generate random numbers.
Again, thank you so much. I really want to learn this but I'm feeling so stupid right now. Any help you can give me about the above error message would be appreciated.

I need help with my wifi sync, please?

Similar Messages

Maybe you are looking for