I need help with network install of SQL Developer 3.2
All,
Does anyone have any references on how to perform a network install for SQL Developer? Here is what I'm trying to achieve:
1. Network installation on drive S:\ (Windows, obviously)
2. User links to network installation
3. Connections are unique for each user
I found the 2006 posting of network install for Raptor, but I could not find anything that correlates with the latest release. All I have done so far is downloaded and unzipped. Any help/instructions/guides/tutorials are welcome.
You have installed!. The code for SQLDeveloper does not have an installer.
If the software is on S, say a shared drive, each user will start sqldeveloper and a directory called sqldeveloper will be created in their local %APPLICATION_DATA% folder. This will keep all connections etc unique for all users.
You will have to create a link from the S drive to the sqldeveloper.exe if you want a shortcut to start it. We dont provide it.
Thanks
B
Similar Messages
-
I need help with re installing my apple account for itunes.
Had problems with my itune account, so I uninstalled and now need help with re-installing the program with the songs I have already purchased.
Your iTunes account is something at the iTunes Store online. It is not possible to uninstall it. Do you mean the iTunes application? Even if you delete the application and restore it, it should not have deleted your iTunes library (essentially the contents of the iTunes folder in Music) on your computer unless you did a separate steep and specifically deleted that too. You need to tell us what it was you deleted.
-
Need help with networking external hard drive
Hi,
I am working on a corporate network and I have a Western Digital My Book Studio Edition external hard drive attached to a Mac OSX 10.4. i have other Macs connecting through the network to this Mac and accessing the external hard drive and it works just fine for that.
What I need help with is the fact that I also have several PCs on the same network (all XP), that need to connect to the hard drive and access the files. I've been able to connect to the Mac using the XP by accessing the IP address. I also set the Mac up with password credentials so that I had to log in to the Mac to access the files. But when I try to access the Mac, it only shows the main computer drive as the only available share and no external drive.
Does anyone know how to access a Western Digital external drive on a Mac from a PC through a network?For an external hard disk drive or other (different) system shared
storage devices to work, they probably should be formatted in a
format seen by both operating systems.
If the WD unit is not seen by Windows computers on your network,
the WD may have been formatted in HFS+ for the Macintosh. That
is OK unless you need a Windows computer to access the same.
The Macintosh can see and use a standard Windows disc format;
so the external drive may need to be reformatted away from HFS+
if that is really what is going on (and archive any data on the suspect
drive elsewhere, since it will be lost to reformatting overwrites)
and then both Mac OS X and Windows should see the files on there.
And Macs set up to run Windows may also see the non-Mac format;
without having to re-boot via BootCamp, if that option is in use.
As to the other question(s) I really have no idea at this point in time.
And since that may be the rub, hopefully someone will follow up here.
Good luck & happy computing! -
there is no install or download when i tap on the app i want. theres something at the top that says the price but its not highlighted and wont let me open it. i already tried logging in and going back to the app i want and it still hasnt changed. i need help cause im not really good at this stuff and i dont know what else to really do
thanksTry checking the Parental Controls-if they are enabled, the price will be shown at the top but it will be grey instead of blue, and won't be able to be selected. (Settings>General>Restrictions)
-
I need help with the install of the upgrade to LR5.
I need assistance with the upgrade install to Lr5. I cannot get past "Destination Select"
The new "OpenH264 Video Codec provided by Cisco Systems, Inc." plugin that now shows up in the Firefox Add-ons Manager Plugins list was added in Firefox 33.0. It's installed in a subfolder of your [[Profiles|Firefox profile folder]], which you can confirm by typing '''about:plugins''' in the Firefox address bar to bring up a list of installed plugins (details [http://kb.mozillazine.org/Issues_related_to_plugins#Identifying_installed_plugins here]) and checking its "Path" entry .
The first link in the [https://www.mozilla.org/en-US/firefox/33.0/releasenotes/ Firefox 33.0 release notes] under What’s New, has this:
'''New''' | [http://andreasgal.com/2014/10/14/openh264-now-in-firefox/ OpenH264 support] * (sandboxed)
[*] Quoted from the linked page, http://andreasgal.com/2014/10/14/openh264-now-in-firefox/
(which also includes a [https://andreasgal.files.wordpress.com/2014/10/openh264.jpg screenshot] of the Add-ons Manager entry):
<blockquote>Today in collaboration with Cisco we are shipping support for H.264 in our WebRTC implementation. </blockquote>
<blockquote>Cisco has agreed to distribute OpenH264, a free H.264 codec plugin that Firefox downloads directly from Cisco.</blockquote>
<blockquote> Note: Firefox currently uses OpenH264 only for WebRTC and not for the <nowiki><video></nowiki> tag, because OpenH264 does not yet support the high profile format frequently used for streaming video. We will reconsider this once support has been added. </blockquote>
See also:
*https://wiki.mozilla.org/Media/WebRTC
*https://wiki.mozilla.org/GeckoMediaPlugins -
Need help with network user accounts on Mac server App on Yosemite, any tips?
I've been trying to set up a small network with the Server app on Yosemite. I don't want to do anything crazy with the server, I'd just like to know how I can set up network user accounts so that they can login from other Mac computers on the same network. I already have Open directory set up, the Macs that will be used on the network with the server have already been joined to the server under login options. I have created the network user account, I have also joined the user account to a group that I created. When I try to login to the network account from one of the Macs, it doesn't work. I'm pretty rookie with Mac server, can anyway give me any pointers of what I should be doing? Or if I am doing something wrong. Thanks guys.
The most important step, once you've got Open Directory and DNS set up, with Local Network Users set up in Server.app, is to make sure that all client Macs are using the server's IP address as the primary DNS server in System Preferences > Network, and that they have joined the Network server in System Preferences > Users and Groups > Login Options.
Having said all that, I have just spent hours setting this all up only to find out that Mail doesn't currently work with Network Homes in 10.10.3 / Server.app 4.1.
I will be hoping that Apple recognise the bug, and put out a fix soon. -
hi, i am trying to leave ubuntu, so i installed Arch Linux. it seems everything went allright on the CD installation, but i am having trouble with the network. i have a dell XPS M1330 with the intel 4965 card, and i believe that the card is recognized by the system.
i can scan for networks, and i can even connect to my network, and when i run "iwconfig" i can see all my network details, including the password, and th signal strenth, noise, etc.
so, everything indicates that i am succesfully connected to my network. but everytime i try a ping it fails misserably, with a host unknown. i've tried google, yahoo, msn... but it doesnt matter. they always fail.
can anybody help me?
btw, i've checked that hostname is the same on rc.conf and hostsEDIT AFTER LAST TRY!!!!!
first of all, i have to say that even though the module is listed on rc.conf, everytime i start the computer i need to do a modprove iwl4965 for the network card to start working, then i have to do "ifconfig wlan0 up" and then is allright.
ok, tonight is the night!!!! lets get going
sputter wrote:But as a thought just to try and get your juices working, what happens if you enable the gateway in your rc.conf?
how do i do that? right now my rc.conf looks like this
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
sputter wrote:with wired connections at times you need to specify a broadcast address, what would happen if you ran
"ifconfig wlan0 192.168.0.221 netmask 255.255.255.0 broadcast 192.168.0.255"
i'll try on a few minutes,
EDIT: nothing special, same result as before
sputter wrote:Is your wireless module being loaded by the MODULES=() line in your rc.conf?
yes it is, iwl4965 is listed there
MODULES=(tg3 iwl4965 snd-mixer-oss snd-pcm-oss snd-hwdep snd-page-alloc snd-pcm snd-timer snd snd-hda-intel soundcore)
megagram wrote:
After doing the manual addressing using ifconfig or the manual configuration in rc.conf, can you show us the output of "route"? Just type "route" and hit enter.
The broadcast flag is likely unneeded as a 255.255.255.0 netmask implies a 192.168.0.255 broadcast address. However, it's definitely worth a shot! I just wonder if, for some really really strange reason your router isn't using a 255.255.255.0 netmask. Can you try giving yourself a lower IP address? Try 192.168.0.2 this will guarantee that you are in the same subnet as your router.
Try this!
according to my wife's computer and my mint install, our netmask is really 255.255.255.0
i will try those suggestions tonight and post the outcome here, but to begin, this is "route" on my mint install
Tabla de rutas IP del núcleo
Destino Pasarela Genmask Indic Métric Ref Uso Interfaz
192.168.0.0 * 255.255.255.0 U 0 0 0 wlan0
link-local * 255.255.0.0 U 1000 0 0 wlan0
default 192.168.0.1 0.0.0.0 UG 0 0 0 wlan0
be right back
this is the outcome on arch before doing dhcpcd
Kernel IP Routing Table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.0.0 * 255.255.255.0 U 0 0 0 wlan0
and this is after doing "dhcpcd wlan0" and getting again the error i posted on my last message
Kernel IP Routing Table
Destination Gateway Genmask Flags Metric Ref Use Iface
169.254.0.0 * 255.255.0.0 U 0 0 0 wlan0
this time i was unable to get a working Access Point although i could connect to my network
Last edited by apertotes (2008-08-06 19:10:24) -
[SOLVED] need help with virtualbox install
I'm a relative n00b to Arch, haging migrated from Ubuntu (pha!!). Arch rocks!
However, my beloved virtualbox isnt playing ball!
After many hours of getting arch up and running I now need some assitance please with VirtualBox PEUL. I've googled and search these wikis and found:
http://aur.archlinux.org/packages.php?d … s=0&SeB=nd
http://www.mail-archive.com/vbox-users% … 02889.html
http://wiki.archlinux.org/index.php/VirtualBox
but, I dont know how to install.
I used yaourt (having spent another many hours trying to get to speed with what Arch AUR is and yaourt!!)
This is what I did:
1. Visited http://wiki.archlinux.org/index.php/VirtualBox and followed PEUL instructions...
2. Click on AUR link and then click on PKGBUILD and it downloaded a PKGBUILD from here http://aur.archlinux.org/packages.php?d … s=0&SeB=nd
3. Then went back to the wiki http://wiki.archlinux.org/index.php/VirtualBox and clicked on VirtualBox_1.5.6-1_Linux_x86.run and downloaded the file.
4. In accordance with the instructions on the wiki, I ran makepkg
HOWEVER, I get errors!!:
# makepkg --asroot
==> Making package: virtualbox_bin 1.5.6-1 (Thu May 1 20:06:33 BST 2008)
==> WARNING: Running makepkg as root...
==> Checking Runtime Dependencies...
==> Checking Buildtime Dependencies...
==> Retrieving Sources...
-> Found VirtualBox_1.5.6-1_Linux_x86.run in build dir
-> Found vbox.install in build dir
-> Found vbox_build_module in build dir
-> Found vboxnet.patch in build dir
-> Found interfaces in build dir
==> Validating source files with md5sums...
VirtualBox_1.5.6-1_Linux_x86.run ... FAILED
vbox.install ... Passed
vbox_build_module ... Passed
vboxnet.patch ... Passed
interfaces ... Passed
==> ERROR: One or more files did not pass the validity check!
This is what is in the downloaded files dir:-
ls -l
total 48
-rw-r--r-- 1 daz users 3642 2008-05-01 20:06 PKGBUILD
-rw-r--r-- 1 daz users 26055 2008-05-01 20:05 VirtualBox_1.5.6-1_Linux_x86.run
-rwxrwxrwx 1 nobody nobody 217 2008-01-08 20:58 interfaces
drwxrwxrwx 2 root root 125 2008-05-01 20:06 src
-rwxrwxrwx 1 nobody nobody 2717 2008-02-22 18:22 vbox.install
-rwxrwxrwx 1 nobody nobody 174 2008-02-22 17:45 vbox_build_module
-rwxrwxrwx 1 nobody nobody 2179 2007-12-30 12:31 vboxnet.patch
Can anyone help please? In Ubuntu all this was just installed with dpkg -i VirtualBox.deb
I'm sure Arch is just as "simple" :-)
Last edited by keratos (2008-05-04 07:54:14)grave wrote:Or try the bin file no problem here yaourt -S virtualbox_bin
Good idea, I checked this out originally but it didnt work so I went for "manual" install.
The download from yaourt never starts, just hangs - the server is dead or something?? ...
# yaourt -S virtualbox_bin
==> WARNING: Building unsupported package as root is dangerous.
Please run yaourt as a non-privileged user.
==> Downloading virtualbox_bin PKGBUILD from AUR...
==> Last 5 comments ordered by date (asc):
Comment by: chris_es on 20080414 [17:02:11]
Hello!
Thanks a lot for this package :o)
Just a quick comment about where to copy the Sun .run package. It should be put to where the tarball from AUR was extracted.
In my case, it is /home/[users]/virtualbox-bin/
Cheers
Chris
Comment by: fi-dschi on 20080419 [22:46:37]
You may download the run-file at
https://cds.sun.com/is-bin/INTERSHOP.enfinity/WFS/CDS-CDS_SMI-Site/en_US/-/USD/ViewProductDetail-Start?ProductRef=innotek-1.5.6-G-F@CDS-CDS_SMI
Comment by: GGLucas on 20080421 [00:40:38]
Can't get the kernel module working in 2.6.25, vbox_build_module completes fine, but I get the following error:
$ sudo modprobe vboxdrv
FATAL: Error inserting vboxdrv (/lib/modules/2.6.25-ARCH/misc/vboxdrv.ko): Unknown symbol in module, or unknown parameter (see dmesg)
with these messages in dmesg:
vboxdrv: Unknown symbol change_page_attr
vboxdrv: Unknown symbol change_page_attr
Comment by: Geekosaurio on 20080422 [03:54:09]
Maybe you could find this instructions helpful
http://www.mail-archive.com/[email protected]/msg02889.html
I've not tried this myself but I will do it soon and post the info here. Maybe create a separate package for 2.6.25 kernels it's a good idea.
Comment by: ise on 20080429 [18:12:57]
The vboxdrv from the mailinglist of virtualbox runs here without problems on 2.6.25 with vbox 1.5.6
First Submitted: Sun, 11 Mar 2007 00:52:22 +0000
Last Updated: Fri, 22 Feb 2008 18:26:15 +0000
virtualbox_bin 1.5.6-1 (Unsupported): Powerful x86 virtualization - binary version (non GPL - free for personal use and evaluation)
==> virtualbox_bin dependencies:
- libidl2 (already installed)
- libxslt (already installed)
- qt3 (already installed)
- e2fsprogs (already installed)
- sdl (already installed)
- libstdc++5 (already installed)
- patch (already installed)
==> Edit the PKGBUILD (recommended) ? [Y/n] ("A" to abort)
==> ----------------------------------------------
==>n
==> WARNING: This PKGBUILD contains install file that can be dangerous.
vbox.install
==> Edit vbox.install (recommended) ? [Y/n] ("A" to abort)
==> ----------------------------------------------
==>n
==> Continue the building of 'virtualbox_bin'? [Y/n]
==> ----------------------------------------------
==>y
==> Building and installing package
==> Making package: virtualbox_bin 1.5.6-1 (Fri May 2 06:06:28 BST 2008)
==> WARNING: Running makepkg as root...
==> Checking Runtime Dependencies...
==> Checking Buildtime Dependencies...
==> Retrieving Sources...
-> Downloading VirtualBox_1.5.6-1_Linux_x86.run...
--2008-05-02 06:06:29-- http://195.34.175.98/download/1.5.6/VirtualBox_1.5.6-1_Linux_x86.run
Connecting to 195.34.175.98:80...
Last edited by keratos (2008-05-02 05:52:33) -
Downloaded PSE11 with Akamai and it will not install.
Akamai download manager shows 2 file links. Both read the same except 1st one shows 11 LS15.7Z and the 2nd shows LS15.exe 1st one appears to download correctly but 2nd one
Says file archive part of Adobe pSE11 is missing and you need all parts in the same folder in order to extract Adobe PSE11. Please download all parts.
Can you help? -
The files apparently downloaded properly, but during install I get the following error message:
The following applications are using files that need to be updated by this setup. Close these applications and click Retry to continue: ElementsAutoAnalyzer.exe.
I'm installing to a Windows XP SP 3 machine with at least 1 gig of ram, and a 1 Tb hard drive that's less than half full, so I don't think it's a hardware issue. I cannot find the named file running anywhere on the machine - anyone run into this?
Help, please! Thanks!
DyaneHi,
Please open Task Manager by pressing Ctrl+Shift+Esc. Open "Processes" tab. Make sure you click "Show processes from all users" . Please see ifElementsAutoAnalyzer.exe is shown in the TaskManager. Please close it and then try to install again.
Regards,
Anushree -
Need help with network adapters for presario sr2163wm
i cant get my network adapter to work on my presario sr2163wm,can someone help find them
Hi:
Below is the link to the network drivers you need for your PC.
Download the driver file for the operating system you have installed on your PC.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=6&Level=5&Conn=4&DownTy...
Paul -
Hello, I will get my new Ipad 2 32GB on April, so I will have enjoying with Ipad with bringing up my excitement on Ipad. I need re-installing Apple Software Update for Windows Vista 32bit, but I did install iTunes, Safari, and Iphone configuration utility that it did not included Apple Software Update software. Please send me download file of Apple Software Update, immediate. Thanks
I do not certain about Ipad configuration utility, would be working with Iphone configuration utility?
davidI went into checking with Apple Software Update then I clicked Control Panel - "Repair" It was restored to start menu, thank you much thumb up to b noir Big Helping me! David
-
Need help with XP instal. stuck at: Intel Matrix Storage Manager Driver
I've bought a new 2.0 ghz laptop with vista blah blah but i want to change to XP.
I've
bought a new copy of XP and am ready to go then first issue was during
installation the screen says can't find harddrive installed.
I
then found some thread somewhere which i've lost that said to buy an
external floppy drive and downloaded that floppy driver thingy that i
need to get past that stage from the toshiba website..
FYI driver name: SA200 ACHI F6-1017-XP
That
worked fine.. when it said press F8 if you agree to install XP i nearly
wet myself.. anyhow after it formatted the drive it then asked me this:
Insert the disk labeled:
*Intel Matrix Storage Manager Driver*
into drive A:
* Press ENTER when ready
WTF are you talking about laptop? can someone please help me past this stage?
:-( :-( i only want XP installed.
So far its been like 3 weeks since i've been trying to install it
Message was edited by: IamMILOSHere are detailed instructions I found earlier:
Installing a Retail (street copy) version of Windows XP on a Vista Toshiba Laptop.
- If the Toshiba laptop has a seperate BIOS for XP and Vista, download and flash the XP BIOS over the Vista BIOS.
- If XP Setup does not detect the SATA Hard Disk, simply turn on "SATA Compatibility Mode" in the BIOS if applicable. If this option is not available, follow these steps:
1) Download the Windows XP SATA F6 driver from the Toshiba Support/Downloads Website.
If an individual F6 driver is not available, download and unzip the Intel Matrix Storage Manager driver. The Intel Matrix Storage Manager driver package should contain some folders under the "F6flpy" folder. For example: ICH7M_32bit for an ICH7 based chipset when installing Windows XP 32bit.
2) Copy the F6 driver files (iastor.inf, etc..) to a blank floppy disk. The actual files must reside in the root directory of the Floppy Disk. For example, A:\iastor.inf, A:\iaahci.inf, etc..
3) Use a Toshiba USB Floppy Drive with the Toshiba notebook. (some non-Toshiba USB Floppy Drives may not function properly during XP setup)
4) Boot from Windows XP CD-ROM, start the installation and ensure the floppy disk is inserted in the USB Floppy Drive.
5) When XP Setup prompts you to press F6 to install a Storage Driver, immediately press F6.
6) When XP Setup prompts you to select a SATA driver, select the appropriate driver and continue. For example: ICH7M Intel(R) 82801GBM SATA AHCI Controller, ICH8M Intel(R) 82801HEM/HBM SATA AHCI Controller
7) Keep the Floppy Drive attached and Floppy Disk inserted until XP has completed its installation. Do not Partition or Format the Hard Disk during XP Setup. The SATA drivers from the Floppy Disk are copied and stored on the Hard Disk during XP installation. -
Need help with ASA 5512 and SQL port between DMZ and inside
Hello everyone,
Inside is on gigabitEthernet0/1 ip 192.9.200.254
I have a dmz on gigabitEthernet2 ip 192.168.100.254
I need to pass port 443 from outside to dmz ip 192.168.100.80 and open port 1433 from 192.168.100.80 to the inside network.
I believe this will work for port 443:
object network dmz
subnet 192.168.100.0 255.255.255.0
object network webserver
host 192.168.100.80
object network webserver
nat (dmz,outside) static interface service tcp 443 443
access-list Outside_access_in extended permit tcp any object webserver eq 443
access-group Outside_access_in in interface Outside
However...How would I open only port 1433 from dmz to inside?
At the bottom of this message is my config if it helps.
Thanks,
John Clausen
Config:
: Saved
ASA Version 9.1(2)
hostname ciscoasa-gcs
domain-name router.local
enable password f4yhsdf.4sadf977 encrypted
passwd f4yhsdf.4sadf977 encrypted
names
ip local pool vpnpool 192.168.201.10-192.168.201.50
interface GigabitEthernet0/0
nameif outside
security-level 0
ip address 123.222.222.212 255.255.255.224
interface GigabitEthernet0/1
nameif inside
security-level 100
ip address 192.9.200.254 255.255.255.0
interface GigabitEthernet0/2
nameif dmz
security-level 100
ip address 192.168.100.254 255.255.255.0
interface GigabitEthernet0/3
shutdown
no nameif
no security-level
no ip address
interface GigabitEthernet0/4
shutdown
no nameif
no security-level
no ip address
interface GigabitEthernet0/5
shutdown
no nameif
no security-level
no ip address
interface Management0/0
management-only
nameif management
security-level 100
ip address 192.168.1.1 255.255.255.0
ftp mode passive
dns server-group DefaultDNS
domain-name router.local
object network inside-subnet
subnet 192.9.200.0 255.255.255.0
object network netmotion
host 192.9.200.6
object network inside-network
subnet 192.9.200.0 255.255.255.0
object network vpnpool
subnet 192.168.201.0 255.255.255.192
object network NETWORK_OBJ_192.168.201.0_26
subnet 192.168.201.0 255.255.255.192
object network NETWORK_OBJ_192.9.200.0_24
subnet 192.9.200.0 255.255.255.0
access-list outside_access_in extended permit icmp any4 any4 log disable
access-list Outside_access_in extended permit udp any object netmotion eq 5020
access-list split standard permit 192.9.200.0 255.255.255.0
access-list VPNT_splitTunnelAcl standard permit 192.9.200.0 255.255.255.0
pager lines 24
logging asdm informational
mtu outside 1500
mtu inside 1500
mtu management 1500
mtu dmz 1500
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
nat (inside,outside) source static inside-network inside-network destination static vpnpool vpnpool
nat (inside,outside) source static NETWORK_OBJ_192.9.200.0_24 NETWORK_OBJ_192.9.200.0_24 destination static NETWORK_OBJ_192.168.201.0_26 NETWORK_OBJ_192.168.201.0_26 no-proxy-arp route-lookup
object network netmotion
nat (inside,outside) static interface service udp 5020 5020
nat (inside,outside) after-auto source dynamic any interface
access-group Outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 123.222.222.1 1
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
http server enable
http 192.168.1.0 255.255.255.0 management
http 192.9.200.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec security-association pmtu-aging infinite
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs group5
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto ca trustpool policy
crypto ikev1 enable outside
crypto ikev1 policy 10
authentication crack
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 20
authentication rsa-sig
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 30
authentication pre-share
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 40
authentication crack
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 50
authentication rsa-sig
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 60
authentication pre-share
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 70
authentication crack
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 80
authentication rsa-sig
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 90
authentication pre-share
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 100
authentication crack
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 110
authentication rsa-sig
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 120
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 130
authentication crack
encryption des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 140
authentication rsa-sig
encryption des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 150
authentication pre-share
encryption des
hash sha
group 2
lifetime 86400
telnet 192.9.200.0 255.255.255.0 inside
telnet timeout 5
ssh timeout 5
ssh key-exchange group dh-group1-sha1
console timeout 0
dhcpd address 192.168.1.2-192.168.1.254 management
dhcpd enable management
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
ssl encryption aes128-sha1 3des-sha1
webvpn
enable outside
anyconnect image disk0:/anyconnect-win-2.5.2014-k9.pkg 2 regex "Windows NT"
anyconnect image disk0:/anyconnect-macosx-i386-2.5.2014-k9.pkg 3 regex "Intel Mac OS X"
anyconnect enable
tunnel-group-list enable
group-policy SSLVPN internal
group-policy SSLVPN attributes
dns-server value 192.9.200.13
vpn-tunnel-protocol ssl-client
split-tunnel-policy tunnelspecified
split-tunnel-network-list value split
default-domain value router.local
group-policy VPNT internal
group-policy VPNT attributes
dns-server value 192.9.200.13
vpn-tunnel-protocol ikev1 l2tp-ipsec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value VPNT_splitTunnelAcl
default-domain value router.local
username grimesvpn password 7.wersfhyt encrypted
username grimesvpn attributes
service-type remote-access
tunnel-group SSLVPN type remote-access
tunnel-group SSLVPN general-attributes
address-pool vpnpool
default-group-policy SSLVPN
tunnel-group SSLVPN webvpn-attributes
group-alias SSLVPN enable
tunnel-group VPNT type remote-access
tunnel-group VPNT general-attributes
address-pool vpnpool
default-group-policy VPNT
tunnel-group VPNT ipsec-attributes
ikev1 pre-shared-key *****
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect icmp
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:36271b5a1b9382621e14c3aa635e2fbb
: endHi Vibor. Apologies if my comment was misunderstood. What I meant to say was that the security level of the dmz interface should probably be less than 100.
And therefore traffic could be controlled between DMZ and inside networks.
As per thr security level on the DMZ interface. ....... that command is correct. :-) -
Need help with windows install
I am trying to install windows 7 64 bit on my macbook pro 2006 running a leopard OS and it keeps saying select cd rom boot type. what do I do?
You don't need a Windows machine to burn the iso to a DVD, if you use "Disk Utility" just burn it at the slowest speed possible and it should work. (unless your doing the work around to get it to work)
Just make sure you use a program that will make it a bootable image tho, you can't just drag the files over to it and let it burn, it has to end up being bootable in order to boot into the installer.
Apple (Boot Camp) will only support NTFS so as part of installing Windows 7 just chose NTFS as the format while booted from the Windows installer.
Basically, start Boot Camp Assistant, download the drivers, make the partition size you want, (doesn't matter what you format it as now, Windows will do it again with the one you need) it will then boot into the Windows installer and you will eventually get to the part where you can format it to NTFS, it will do it's thing and reboot into the new Windows 7 desktop and you will then install the drivers.
Good luck.....
Maybe you are looking for
-
Links to web gallery don't work from blog preview
I used the idea by somebody in this forum (sorry, forgot who!) to have a blog with each entry linking directly to the various different view options of the .mac web gallery, like this: http://web.mac.com/kazazi/PiNoProductions/Photos/Entries/2007/9/1
-
Interactive Report - filtering with the "IN" operator
Hello, I have a column in an IR that is a concatenated field (Last Name, First Name MI). When filtering on this field using the IN operator, it returns the correct record if one value is chosen, but if more than one value is chosen, no data is return
-
CAN'T FIND OUTLOOK PROFILE IN DESKTOP SOFTWARE 7.1
Hi ererybody, i must configure blackberry sinc. with a windows 7 pc with outlook 2010 std I can't find my profile outlook in blackberry software. Can you help me? thank you Francesca
-
Spooling large data using UTL_FILE
Hi Everybody! While spooling out data into a file using UTL_FILE package I am unable spool the data The column data has a size of 2531 characters The column 'source_where_clause_text' has very large data. Its not giving any error but the external tab
-
My task is to design a module which will be pollong an url for some xml data. The data will be updated from the source at around 19.30 (+/- 1 hour) every day. I'm on wls 6.1 with portal in a J2EE application. Anybody know a pattern for this? Any sugg