I need help with one chapter of the Logic training series book...

I've been studying from the Apple Pro training series manual - Logic pro 9, Professional Audio Production. I'm keen to sit the exam asap, and move onto the next book in the series, but may need a little coaching on one chapter - namely Appendix A, 'Using External MIDI devices.' I've never used Logic in this way, and only have one MIDI piano to work with at home. Therefore recreating what is required in the chapter, and getting my head around the material is proving difficult. Therefore I have two questions - 1) Will this section be tested in the exam? And if so, 2) Is there anyone in the Berkshire / Surrey / West London area who could help me with a quick lesson? (I'd be prepared to pay, obviously) I've been using Logic for a number of years, so would prefer not to have to spend serious money on a full blown course.
I'm keen to sit the exam over half term if possibe - w/c 4th June 2012.
Thanks for your help.
Arron

Hi
Appendix A covers setting up Audio MIDI Setup for a "real" external Synth, and then getting Logic to create a track to send MIDi out to that Synth. Finally, you set up the Program names.
You should be able to go through the first part (and do it) providing you have some kind of MIDI Interface showing up in AMS. Create a "dummy" MIDI 'Synth' and cable it up.
Once done, this 'dummy' synth will appear in Logic's Library for External Instrument tracks. Without an real synth you will not be able to hear any results.
You could run through the process for setting up the program names, but without something actually attached, you will not be able to hear/see the changes.
You could run in 32bit mode and use the "Software" quicktime synth, or maybe sort something using an IAC bus, but frankly, that's more likely to confuse the **** out of you at this stage.
HTH
CCT

Similar Messages

I have an itouch, most songs i got off my cd's. i have a new laptop and want to put songs from itouch to laptop.I can only get the songs that i purchased onto the laptop? need help with how to get the rest from itouch to laptop please??

i have an itouch, most songs i got off my cd's. i have a new laptop and want to put songs from itouch to laptop.I can only get the songs that i purchased onto the laptop? need help with how to get the rest of the songs (from my cd's) from itouch to laptop please??

See this previous discussion:
Recovering your iTunes library from your iPod or iOS device: Apple Support Communities

I need help with viewing files from the external hard drive on Mac

I own a 2010 mac pro 13' and using OS X 10.9.2(current version). The issue that I am in need of help is with my external hard drive.
I am a photographer so It's safe and convinent to store pictures in my external hard drive.
I have 1TB external hard drive and I've been using for about a year and never dropped it or didn't do any thing to harm the hardware.
Today as always I connected the ext-hard drive to my mac and click on the icon.
All of my pictures and files are gone accept one folder that has program.
So I pulled up the external hard drive's info it says the date is still there, but somehow i can not view them in the finder.
I really need help how to fix this issue!

you have a notebook, there is a different forum.
redundancy for files AND backups, and even cloud services
so a reboot with shift key and verify? Recovery mode
but two or more drives.
a backup, a new data drive, a drive for recovery using Data Rescue III
A drive can fail and usually not if, only when
and is it bus powered or not

Need help with finding a workaround: the shotcut ctrl+click opens 2 tabs in my case

Hello!
I have several links with an onclick event, which contains some javascript handling and window.open() after it, and they have attribute href="javascript:void(0);" as well.
When user try Ctrl+click Firefox opens him 2 tabs: the first one with "right" content and the second with javascript:void(0).
I've tried to set href="#" and in this case Ctrl+click works as I want, but on the original tab the user is redirected by the browser to the top of the page. The empty attribute (href="") also results 2 tabs. Maybe there is some value of the href attribute with which everything will work as I want? I've fed up with this and will be appreciated a lot if you help. Thanks.
== This happened ==
Every time Firefox opened
== User use Ctrl+click

I won't be searching thru all that code to try to find something relevant to your post, but if you are using a Loader to load the images, you can get the width and height as soon as the loading is complete using the loader object (loader.width, loader.height). You just need to wait until loading is complete, so you'll need a listener for that if you don't have one already.

Need help with repeating Subforms on the next page

I have created two different flowable repeating subforms, for example - subform1 and subform2 in a document with an action button for each to add another subform on the next page. After subform2, I have two buttons - one to add subform1 again or add subform2 on the next page. When I click the button, Livecycle adds the new subform as commanded but the subform is added directly after the previous same subform not on the next page as requested. I have tried to change the pagination settings but nothing seems to work. Can anyone help me define how to get the repeating subform to add to the next page and not after the same subform?

OK, so here's what I would do.
1. Wrap your subform1 and subform2 in a subform. I'll call it sfMaster.
2. Change your minimum instance for subform1 and 2 to 0 or uncheck the box, and set the initial count to 1. (That way you get at least one of each when we start.)
3. have the buttons create a new instance of sfMaster, then remove the instance of the subform you didn't want within that most recent instance.
So, what the user sees is a new subform1 or 2 each time they hit a button. And they'll appear in whatever order they choose it. The user doesn't have to know that what is actually happening is the creation of a new "master" subform that holds both subform1 and 2.
To help illustrate what I mean, I've added a pink border around sfMaster and colored subform1 and 2.
Binding options for Subform2 (Subform1 would be similar)
What it looks like in action
If you want to guarantee it appears on the next page, you'll need to add the conditional break from earlier. Keep working with it to get the settings just right. You may even want a docReady() event that creates two sfMaster's and sets one to have Subform1 and the other to have Subform2.

Need Help with One to One Mapping in SQL

Can aynone please design me tables in Oracle .
I want to have a two tables with one to one mapping .
Following is the scenario.
I have an Employee object and a Parking Space Object. The have a one to one relation i.e., an employee will always be associated to only one parking space, that parking space should not be associated to any other employee.
It would be a great help .

sb92075 wrote:
We don't do homework assignments.I used to do my own... seems like a novel concept now-a-days :)

Need help with LikeFilter for querying the keyset instead of value

Hi,
I'm looking for help with the LikeFilter.
I need to query the cache to get all entries with key starting with a particular string.
I could see samples using LikeFilter for querying the values in the cache but not the keyset.
Can someone help?
E.g:
Cache Entries:
abc123 - value1
abc234 - value2
bcd123 - value3
I want to get all entries with key starting with 'abc'.
thanks,
rama.

NJ, thanks for the quick reply.
I tried something similar (as below) but this code gives me 'java.lang.NoClassDefFoundError: com/tangosol/util/ValueExtractor'.
KeyExtractor extractor = new KeyExtractor("getKey");
Filter filter = new LikeFilter(extractor, id+":%",'-',false);
-rama.
Edited by: 911950 on Feb 2, 2012 1:18 PM

2 minor issues need help with one BBM and one email

I am hoping someone can help with this
the BBM issue is one of my contacts that has the z10 doesn't show option for my to video chat with him all my other contacts do and he has it displayed on his side and all his options are set same as mine
second question is since i set up my activesync email it has pushed a password on my phone everytime it goes to sleep and i go to options and cannot turn off the device password option.
Hope someone has some ideas

It sounds like the account you connected to for ActiveSync has an IT policy that requires the password. You can't get around it. You'd have to talk to them.
For BBM, have you verified the PIN is correct on each end? Can you BBM directly with this person? You both have to be on wifi, as well.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Need help with installing Windows for the bar exam

I need to retake the bar exam in Feb 2011 and I've decided to switch to typing. I am trying to figure out what Windows I need (the software says XP is fine but is that even available anymore)- so can someone walk me through this process? I've partioned my hard drive with the default 5GB but should it be more?
I'm looking at buying Windows- is XP okay or should I shell out for 7-i.e. is one more compatible with Macs?
And then finally, in the installation instructions they mention that I need my Mac OS disc for the process- is that the snow leopard disc or something else? My discs are in storage right now so should I wait until I get them before starting this process or can I get replacements if I accidentally threw them out in moving?
Sorry for all the questions, but well, I'm racing to get everything done and I want to make sure I don't crash my system halfway through the exam!

You don't need Boot Camp, but even XP will have a lot of stuff to update from after the install, and that takes temp space. Just as your Mac shows 5-10GB there is add'l hidden space used.
Apple's 'requirements' has gotten others in trouble and I was pretty sure it was more like 10GB. Plus a lot of XP discs are now SP3.
XP out of the box but connected to the net is just waiting for malware, average is 15 minutes to be infected. 7 is better and just in case you need it again.
System Builder can come in 32 or 64-bit but XP is 32-bit only.
VirtualBox by Oracle is a free VM.
1GB for one program actually seems like a lot, or is that RAM requirement?

I need help with one menu

Hi evryone i created a menu in flash, the actionscript code
is:
// -- funciones
MovieClip.prototype.TLonRollOver = function() {
formato.color = 0x666666;
this.texto.setTextFormat(formato);
MovieClip.prototype.TLonRollOut = function() {
formato.color = 0x666666;
this.texto.setTextFormat(formato);
MovieClip.prototype.TLonRelease = function() {
// -- restaura todos los botones a su estado original
for (i=0; i<menu.length; i++) {
item = eval("boton_mc"+i);
item.enabled = true;
item.useHandCursor = true;
formato.color = 0x666666;
item.texto.setTextFormat(formato);
// -- carga el clip de película en un clip contenedor
holder_mc.loadMovie(this.pelicula);
// -- deshabilita el botón pulsaso
this.enabled = false;
// -- desahbilita el cursdor en forma de mano
this.useHandCursor = false;
// -- para indicar que el botón se encuentra
desahbilitado
// -- se cambia el color de texto por uno más tenue.
formato.color = 0xCCCCCC;
this.texto.setTextFormat(formato);
// -- Formato
formato = new TextFormat();
formato.font = "Verdana";
formato.size = 18.5;
formato.color = 0x000000;
// -- Menú
menu = new Array();
menu[0] = {titulo:"Inicio", pelicula:"inicio.swf"};
menu[1] = {titulo:"Terapias", pelicula:"terapias.swf"};
menu[2] = {titulo:"Terapeutas", pelicula:"terapeutas.swf"};
menu[3] = {titulo:"Tienda", pelicula:"tienda.swf"};
menu[4] = {titulo:"Noticias", pelicula:"news.swf"};
// -- clip contenedor
this.createEmptyMovieClip("holder_mc",
this.getNextHighestDepth());
holder_mc._x = 0;
holder_mc._y = 0;
// -- Montar Menú
formato.color = 0x666666;
for (i=0; i<menu.length; i++) {
// --se crean nuevas instancias del clip vinculado
attachMovie("boton_mc", "boton_mc"+i,
this.getNextHighestDepth());
anterior = eval("boton_mc"+(i-1));
item = eval("boton_mc"+i);
item.pelicula = menu
.pelicula;
item.texto.autoSize = true;
item.texto.text = menu.titulo;
item.texto.setTextFormat(formato);
// -- posicionamiento x-y
item._y = 10;
if (i == 0) {
item._x = 10;
} else {
item._x = anterior._x+anterior._width;
// -- eventos de botón
item.onRollOver = this.TLonRollOver;
item.onRollOut = this.TLonRollOut;
item.onRelease = this.TLonRelease;
well, i need to know how i can link each option with an URL
and the target is in other frame
Please help me!!!!

hi
still i am not sure what do u want to achieve?
if u wanna create u r own toolbar then try something like this, but while creating buttons then u have to use codes too.
There is an easier way to get the "toolbar" you want to have.
1. Build a mmb with all the functions you want to have both in the menu and in the toolbar.
2. For each menuitem, you can define in the properties
- If it should be shown in the menu, then set "Visible In Menu" to Yes
- If it should be shon in the horizontal toolbar (or vertical toolbar), then set "Visible In Horizontal Menu Toolbar" ("Visible In Vertical Menu Toolbar") to Yes
- For showing an item in a toolbar, you will have to set the property "Icon Name" additionally to the name of an existing icon (the same way you do for buttons)
3. Compile and generate the menu
4. Build a form and attach your menu as Menu-Module in the properties of the form.sarah

Need help with Expressions to get the sum of rows between dates

Date Total
8/06/2010 $2000
8/10/2010 $5000
8/28/2010 $2500
9/10/2010 $5000
9/16/2010 $2000
9/25/2010 $7000
9/28/2010 $2500
I need sum of rows based on month. I have tried following syntax. It did not work, which is returning $0. Appreciate any help i get.
=sum(iif(Date.value>="8/01/2010" AND Date.value<="8/30/2010",Total.value,0))

Hi RG K,
According to your description, you want to calculate sum of total based on month use expression, but the expression does not work. If that is the case, please refer to the following steps:
In design surface, right-click Insert and click Text Box.
Right-click inside of the text box, then click expression.
In Expression text box, type the expression like below:
=sum(iif(Fields!Date.Value>="8/01/2010" AND Fields!Date.Value<="8/30/2010",Fields!total.Value,CDec(0)))
In this expression, the data type of total is Decimal, so we need to convert 0 to Decimal use CDec() function. If data type of total is Double, we need to use CDbl() function.
The following screenshot is for your reference:
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
Wendy Fu
TechNet Community Support

I need help with this tutorial from the Adobe website

I'm almost done with my flash game which I created with flash pro cc. And i have been looking for tutorials to integrate my game to the Facebook and this is the only one I found. http://www.adobe.com/devnet/games/articles/getting-started-with-facebooksdk-actionscript3. html
Am I on the right track?? The editor uses Flash Builder but I'm using Flash Pro cc.
--- On Step 2: "Set up a development server for the Flash app",
Sub-step #2. "To simplify the development process, configure Flash Builder to compile into your htdocs/fbdemo folder and run (or debug) the app on your server (see Figure 2)."
1) But I can't find "ActionScript Build Path"(which is highlighted on the Figure 2 screenshot) or anything like that in Flash pro. Same for the "Output folder URL".
Can I actually do the same things with Flash Pro cc?? Also #3 is "Verify that your app runs from your server." How do you run your app from your server??
---- On Step 4: "Initialize the Facebook JS SDK",
2) so if I setup a server on a localhost just like the tutorial, I don't need to change the following? This is on line #6.
channelUrl : 'www.YOUR_DOMAIN.COM/channel.html'
can i just leave it like that ?
3) So if I complete the tutorial, can facebook users play my game? or do i have more things to do?
4) is there any other tutorial for Flash Pro CC to Facebook integration???
Thank you so much for your help and time.

this is an excerpt from http://www.amazon.com/Flash-Game-Development-Social-Mobile/dp/1435460200/ref=sr_1_1?ie=UTF 8&qid=1388031189&sr=8-1&keywords=gladstien
The simplest way to hook into Facebook is to add their Plugins to add a Like button, Send button, Login button etc to your game. If you only want to add a Like button to a page on your website, you can use the following iframe tag anywhere (between the body tags) in your html document where you want the Facebook Like button to appear:
<iframe src="http://www.facebook.com/plugins/like.php?href=yoursite.com/subdirectory/page.html" scrolling="no" frameborder="0" style="border:none; width:500px; height:25px"></iframe>
Where the href attribute is equal to the absolute URL to your html file. For example:
<iframe src="http://www.facebook.com/plugins/like.php?href=kglad.com/Files/fb/" scrolling="no" frameborder="0" style="border:none; width:500px; height:25px"></iframe>
points to index.html in kglad/com/Files/fb.
However, to get the most out of Facebook you will need to use JavaScript or the Facebook ActionScript API and register your game on the Facebook Developer App page. Before you can register your game with Facebook, you will need to be registered with Facebook and you will need to Login.
Once you are logged-in, you can go to https://developers.facebook.com/apps and click Create New App to register your game with Facebook. (See Fig11-01.)
***Insert Fig11-01.tif***
[Facebook's Create New App form.]
Enter your App Name (the name of your game) and click continue. Complete the Security Check (see Fig11-02) and click Submit. You should see the App Dashboard where you enter details about your game. (See Fig11-03.)
***Insert Fig11-02.tif***
[Security Check form.]
***Insert Fig11-03.tif***
[App Dashboard with Basic Settings selected.]
If you mouse over a question mark, you will see an explanation of what is required to complete this form. Enter a Namespace, from the Category selection pick Games, and then select a sub-category.
Your game can integrate with Facebook several ways and they are listed above the Save Changes button. You can select more than one but for now only select Website with Facebook Login and App on Facebook, enter the fully qualified URL to your game and click Save Changes. (See Fig11-04.)
***Insert Fig11-04.tif***
[Facebook integration menu expanded.]
You can return to https://developers.facebook.com/apps any time and edit your entries. Your game(s) will be listed on the left and you can use the Edit App button to make changes and the Create New App button to add another game.
Click on the App Center link on the left. (See Fig11-05a and Fig11-05b.) Fill in everything that is not optional and upload all the required images. Again, if you mouse over the question marks you will see requirement details including exact image sizes for the icons, banners and screenshots.
***Insert Fig11-05a.tif***
[Top half of the App Center form.]
***Insert Fig11-05b.tif***
[Bottom half of the App Center form.]
When you are finished click Save Changes and Submit App Detail Page. You should then see Additional Notes and Terms. (See Fig11-06.)
***Insert Fig11-06.tif***
[Additional Notes and Terms.]
Tick the checkboxes and click Review Submission. If everything looks acceptable, click Submit. You should then see something like Fig11-07.
***Insert Fig11-07.tif***
[After agreeing with Facebook's terms, you should be directed back to App Center and see this modal window.]
You are now ready to integrate your game with Facebook's API. Because there is a Facebook ActionScript API that communicates with Facebook's API, you need not work directly with the Facebook API.
But before I cover Adobe's Facebook ActionScript API, I am going to cover how you can use the Facebook JavaScript API directly. There no reason to actually do that while the Facebook ActionScript API still works but by the time you read this, the Facebook ActionScript API may no longer work.
In addition, this section shows the basics needed to use any JavaScript API so it applies to any social network that has a JavaScript API including the next "hot" social network that will arise in the future.

I need help with exporting project for the web

Probably something i am doing wron g but here are the problems. When I use Quicktime Converter, if I try to convert to a Quicktime movie or an MPEG-4 nothing happens and i get a 'File error;File Unknown message' when i try to convert to an AVI File, it works, but even though I have already rendered the project, it shows up with little flashes of blue that say 'unrendered'. and finally, when I try to make it a w
Windows Media File, it stops after 29 seconds. Any ideas?
I have an iMac with dual core processor, and FCE HD 3.5.1. I have my video files on an external drive.
iMac Mac OS X (10.4.10)

perform a search using the term export for web and it should throw up some ideas.
here's one for starters:
http://discussions.apple.com/thread.jspa?messageID=2309121&#2309121
If you're using flip4mac to convert to wmv, the trial stops at 30 seconds - you need at least wmvstudio to export to wmv:
http://www.flip4mac.com/wmv.htm

Need Help with instr/Regexp for the query

Hi Oracle Folks
I am using Oracle
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
I have some student responses and the valid values are +/-/O(alphabet)/P and spaces at the end of the sting only not in the middle.
As per my requirement the record number 2 3,4 should be listed from the query but I am getting only one (record 3).
Can we use REG_EXP
Please help.
Thanks in advance.
Rajesh
with x as (
SELECT '+-+-POPPPPPP   ' STUDENT_RESPONSE, 1 record_number FROM DUAL union all
SELECT '+--AOPPPPPP++' STUDENT_RESPONSE, 2 record_number FROM DUAL union all
SELECT '+-+- OPPPPPP--' STUDENT_RESPONSE, 3 record_number FROM DUAL union all
SELECT '+-+-9OPPPPPP   ' STUDENT_RESPONSE, 4 record_number FROM DUAL )
(SELECT RECORD_NUMBER,
TRIM(STUDENT_RESPONSE) FROM X
WHERE
((INSTR (UPPER(TRIM(STUDENT_RESPONSE)),'-') =0)
OR (INSTR (UPPER(TRIM(STUDENT_RESPONSE)),'+') =0)
OR (INSTR (UPPER(TRIM(STUDENT_RESPONSE)),'O') =0)
OR (INSTR (UPPER(TRIM(STUDENT_RESPONSE)),'P') =0)
OR (INSTR (UPPER(TRIM(STUDENT_RESPONSE)),' ') !=0)
)

Hi, Rajesh,
Rb2000rb65 wrote:
Hi Oracle Folks
I am using Oracle
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing optionsThanks for posting this (and the WITH clause for the sample data). That's very helpful.
I have some student responses and the valid values are +/-/O(alphabet)/P and spaces at the end of the sting only not in the middle.Are you combining the responses to several qeustions in one VARCHAR2 column? It might be better to have a separate row for each question.
As per my requirement the record number 2 3,4 should be listed from the query but I am getting only one (record 3). What exactly is your requirement? Are you trying to find the rows where student_response contains any of the forbidden characters, or where it contains a space anywhere but at the end of the string?
Can we use REG_EXPYes, but it's easy enough, and probably more efficient, to not use regular expressions in this case:
Here's one way:
SELECT     record_number
,     student_response
FROM     x
WHERE     TRANSLATE ( UPPER ( RTRIM (student_response, ' '))
            , 'X+-OP'
            , 'X'
            )     IS NOT NULL
;That is, once you remove trailing spaces and all occurrences of '+', '-', 'O' or 'P', then only the forbidden characters are left, and you want to select the row if there are any of those.
If you really, really want to use a regular expression:
SELECT     record_number
,     student_response
FROM     x
WHERE     REGEXP_LIKE ( RTRIM (student_response)
              , '[^-+OP]'          -- or '[^+OP-]', but not '[^+-OP]'. Discuss amongst yourselves
              , 'i'
;but, I repeat, this will probably be slower than the first solution, using TRANSLATE.
Edited by: Frank Kulash on Oct 17, 2011 1:05 PM
Edited by: Frank Kulash on Oct 17, 2011 1:41 PM
The following is slightly simpler than TRANSLATE:
SELECT     record_number
,     student_response
FROM     x
WHERE     RTRIM ( UPPER ( RTRIM (student_response, ' '))
           , '+-OP'
           )          IS NOT NULL
;

Need Help with error message on the Network Systems Preferences, Please

In Systems Preference, > Network, I get the error message "Your network settings been changed by another application," with an active OK button. However, when I click the OK button, it persists and does not allow me to access the screen. The only way to end this is to force quit Systems Preferences.
Do you have any idea what is causing this freeze? I have a TimeWarner Internet connection (which I want to change to Verizon as soon as I resolve this). For a while I had Earthlink DSL which didn't work well at all. Could it be something with the not-used Earthlink or the current TimeWarner?
Any ideas about the cause and, more importantly, the solution?
Thanks,
Jeanie

My computers have not been networked, intentionally. I like having them autonomous. So I have a separate Internet connection for each. And maybe that's what I need to maintain.
In the house is a Mac Mini and the house phone with new Verizon modem. In the separate office, I have my G5 tower, which is really my main computer.
Was just on phone with Verizon Tech who did say that they do not support Mac. They made a decision not to because there are fewer of us. However, I can purchase a premium support which appears to cover such support.
I've not seen the Verizon commercials, but I expect that they are filled with hype. The one I laugh at the most on the FIOS cable video is that they call their cable user interface "intuitive."

I need help with one chapter of the Logic training series book...

Similar Messages

Maybe you are looking for