I need help with proper DNS setup for 10.5.8 Server

I'm administering a 10.5.8 server that I sold and setup about a year ago. I'm experiencing issues with getting iCal server to be happy. All of the clients are running 10.5.8, but I'm running 10.6.1. I've heard from others that connecting iCal in 10.6 to a 10.5 iCal Server should be no problem.
I'm beginning to think that I have DNS issues. Probably because I'm not and never have been 100% certain how to set it up completely correctly. I used to be able to get Kerberos tickets, but now I can't. With the new "Ticket Viewer" in 10.6, it asks for two bits of information. First is "Identity" where I'm guessing I should put [email protected] and then password. When I do this I get an alert dialog that says "Kerberos Error -- cannot resolve network address for KDC in realm example.com"
The server is a Mac Pro tower with two Ethernet ports. En2 is connected directly to the Internet and has a static IP with a domain name assigned to it. We'll call it "example.com" for the purposes of the discussion. The En1 is connected to the network switch and has a static LAN IP of 192.168.1.250. All clients inside and outside are able to reach the server via domain name for WWW & AFP, no problem.
nslookup on the static IP address returns "example.com" and nslookup on "example.com" returns the correct static IP address. Open Directory is running and happy including Kerberos. The LDAP search base is "dc=example,dc=com". The LDAP search base is a concept I haven't quite grasped, so I'm just going to assume it's correct.
The domain name is hosted outside by a service provider that forwards all "example.com" requests to the server with the exception of mail.
In DNS, I have three "sections" that look like this:
Name Type Value
1.168.192.in-addr.arpa. Reverse Zone -
192.168.1.250 Reverse Mapping example.com.
000.000.00.in-addr.arpa. Reverse Zone -
000.000.000.000 Reverse Mapping example.com.
com. Primary Zone -
mail.example.com. Alias mail.our-email-isp.com.
example.com. Machine Multiple values
www.example.com. Machine Multiple values
NOTE: the zeros aren't actually zeros, they are the static IP assigned to the server/domain
When I select the top element "1.168.192.in-addr.arpa." down below "Allows zone transfer" is NOT checked. Nameservers shows the zone as "1.168.192.in-addr.arpa." and the Nameserver Hostname as "ns.example.com."
When I select the next line down "192.168.1.250", Resolve 192.168.1.250 to: example.com.
When I select the "000.000.00.in-addr.arpa." element, it has the same settings -- nameservers "000.000.00.in-addr.arpa." and "ns.example.com."
When I select the next line down (our static IP), Resolve 000.000.000.000 to: example.com.
When I select "com." the admin email is populated with a valid email address, Allows zone transfer is NOT checked. In nameservers, Zone is "com." and Nameserver Hostname is "example.com." The mail exchangers are mail2.our-email-isp.com. priority 10 and mail.our-email-isp.com. and priority 20.
When I select the machine "example.com." it shows both the real-world static IP and the 192.168.1.250, same with "www.example.com.".
Am I doing something wrong with this setup? Should "com." be the primary zone or should that be "example.com." ???
I've been thinking about getting rid of the DNS entry for the 192.168.1.250 address altogether, but will the clients in the office suffer performance issues??? I do not think that the client workstations are configured to get DNS from the server anyway. Should the "www.example.com." record be a Machine record or should it be an alias record?
Any help you have to offer is greatly appreciated! Thanks!
In the meantime, I'm going to look around and see if I can understand "Allows zone transfer" and LDAP Search base a bit better.

Okay, I found a lovely article at the following address which I think helps me to clarify what I'm doing wrong. Despite that, I'd still like to have any feedback you have to offer.
http://www.makemacwork.com/configure-internal-dns-1.htm
Also, when editing DNS entries, Server Admin likes to set the nameserver to "ns." -- whatever your domain is. Should I be overriding that and if so, replace it with what?

Similar Messages

Help with Proper DNS Setup for Leopard Standard Server Setup

Hello All,
Problem Description-
I was reviewing some training today on DNS setup and checking for proper setup with the sudo changeip - checkhostname tool and I seem to have an incorrectly configured DNS setup. So I need some help on correcting it. When I go to the "Server Preferences" tool I cannot log in using apple.ourdomainname.com instead in order to use the tool I have to input localhost as the server name. Now I just thought that the system was broken or something and with the help of my training I now see it's a DNS problem. I thought I had everything proper since I followed the steps of creating proper DNS/RDNS entries with my ISP. Now I am stuck wondering what else isn't working properly due to the DNS issue. Thanks in advance.
Technical Info-
My ISP provides us with 5 static IP's and we have asked them to create entries and verified the setup of apple.ourdomainname.com = x.x.x.x which is one of our public IP's assigned currently assigned to the WAN port of our Apple Airport Extreme. We have also had them create a PTR record which also is present, verified and functional. Our MacMini running 10.5.5 is connected directly to one of the ethernet ports on our Apple Airport Extreme which is our NAT/Firewall for the LAN. So during the setup of the Standard Server install the OS configured the Airport with the required ports for chat/web/vpn. And mobile Mac's can VPN in and gain folder access and web works fine too. We don't use the e-mail portion so I can't say how that works. The server is using the DNS of 10.0.200.1 which is the IP of the Airport and the airport is programmed with the DNS of OpenDNS servers 208.67.222.222 and 208.67.220.220. The reason for this whole long shpeal is that I want to give as much technical background as possible for the best possible help.
Thanks
DM

What happens when you use 'Localhost' instead of 'localhost' (i.e. capitalizing the 'L')?

Need help with QoS config/setup for my home network.

I have a home network that spans two buildings, has and FTP download server, VoIP phones,and several computers among other IP devices. I run a home based business where my clients get access to the company FTP download server (NOT illegal file sharing). the problem is that when they are downloading files my VoIP takes a big hit and gets choppy when speaking to my customers. Below is the layout of the network.
Our Internet access is Verizon 4G, there are no other options available at this time or we would switch. The Verizon 4G MiFi connects to a TP-Link wifi router that then connects to port fa0/5 on the Office 3550PoE switch. There is a trunk between the Office switch to the House 3550PoE switch. The House switch then connects to the Shop 3524XL switch also using a trunk. Please note that EVERYTHING works fine other than the VoIP issue, VoIP makes and receives calls without connections issues.
Auto QoS has been run on the Office switch ports fa0/1 and fa0/2 as well as on the House switch ports fa0/3 and fa0/5. There is NO auto QoS on the 3524XL
What is the best way to give VoIP traffic top priority over FTP and web browsing when going out port fa0/5 on the Office Switch? Over the internal network we are not having any call quality issues between the IP phones, just calls to our SIP provider. Yes, I understand that once calls exit the Office switch to the TP-Link wifi router there will not be any QoS. But, if I can give priority to the packets at the layer 3 Office switch (or wherever you suggest) then at least I will not have to kill a users FTP download while I am on the phone.
Thank You

I can make ANY changes necessary, just need to know what to do.
First, did you notice the output of the command sh mls qos fa0/5 above? Is it working correctly?
Next, Yes I do have version W17 and can install if if needed. The lost of possible commands I listed above was from the conf t - config interface fa0/x level. There is class and policy mapping commands the the config global level along with all these other commands:
aaa                         Authentication, Authorization and Accounting.
access-list                 Add an access list entry
alias                       Create command alias
arp                         Set a static ARP entry
banner                      Define a login banner
boot                        Boot Commands
buffers                     Adjust system buffer pool parameters
cdp                         Global CDP configuration subcommands
cgmp                        Global CGMP configuration commands
class-map                   Configure QoS Class Map
clock                       Configure time-of-day clock
cluster                     Cluster configuration commands
default                     Set a command to its defaults
default-value               Default character-bits values
downward-compatible-config Generate a configuration compatible with older software
enable                      Modify enable password parameters
end                         Exit from configure mode
errdisable                  Error disable
exception                   Exception handling
exit                        Exit from configure mode
file                        Adjust file system parameters
help                        Description of the interactive help system
hostname                    Set system's network name
interface                   Select an interface to configure
ip                          Global IP configuration subcommands
line                        Configure a terminal line
logging                     Modify message logging facilities
mac-address-table           Configure the MAC address table
map-class                   Configure static map class
map-list                    Configure static map list
mvr                         Enable/Disable MVR on the switch
no                          Negate a command or set its defaults
ntp                         Configure NTP
policy-map                  Configure QoS Policy Map
power                       power configuration
priority-list               Build a priority list
privilege                   Command privilege parameters
queue-list                  Build a custom queue list
rmon                        Remote Monitoring
scheduler                   Scheduler parameters
service                     Modify use of network based services
shutdown                    Shutdown system elements
snmp-server                 Modify SNMP parameters
spanning-tree               Spanning Tree Subsystem
stackmaker                  Specify stack name and add its member
tacacs-server               Modify TACACS query parameters
tftp-server                 Provide TFTP service for netload requests
time-range                  Define time range entries
udld                        Configure global UDLD setting
username                    Establish User Name Authentication
vmps                        VMPS settings
vtp                         Configure global VTP state

Need help with dual monitor setup for KDE 3.5.5.

Here's my hardware:
NEC MultiSync LCD 1530V: 1024x768 (analog)
Samsung SyncMaster 941BW: 1440x900 (digital)
nVidia Dual head AGP video card.
The dual monitor works under dual-boot Windows, boot up and pure Linux console. I've googled around for help, changed my xorg.conf file accordingly to some sites, but it wasn't much help.
Here's my working xorg.conf:
Section "ServerLayout"
Identifier "Simple Layout"
Screen "Screen 1" 0 0
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Section "Files"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "dbe" # Double buffer extension
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
Load "freetype"
Load "glx"
EndSection
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
Option "AutoRepeat" "500 30"
Option "XkbRules" "xorg"
Option "XkbModel" "pc101"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "Auto" # Auto detect
Option "Device" "/dev/input/mice"
EndSection
Section "Monitor"
Identifier "NEC LCD1530V"
HorizSync 31.5 - 48.5
VertRefresh 50.0 - 70.0
EndSection
Section "Device"
Identifier "Standard VGA"
Driver "vga"
VendorName "Unknown"
BoardName "Unknown"
EndSection
Section "Device"
Identifier "NVIDIA GeForce"
Driver "nvidia"
Option "NoLogo" "true"
EndSection
Section "Screen"
Identifier "Screen 1"
Device "NVIDIA GeForce"
Monitor "NEC LCD1530V"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 8
Modes "1024x768"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1024x768"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x768"
EndSubSection
EndSection
Using this xorg.conf file, only my NEC LCD analog monitor could display KDE while the Samsung digital can't.
Any suggestions?

Thanks for your help guys, I'm halfway there.
The second monitor shows the KDE desktop, but it isn't exactly what I expected. Right now, both monitors display at 1024x768 (each) or 2048x768 (total). The larger monitor stretches and distorts the display of 1024x768 to its natural resolution at 1440x900 and it isn't what I wanted. Other than that, the dual desktop setup behaves what I expected to.
Here's a snippet of my xorg.conf that currently works:
Section "Monitor"
Identifier "NEC LCD1530V"
HorizSync 31.5 - 48.5
VertRefresh 50.0 - 70.0
EndSection
Section "Monitor"
Identifier "Samsung SyncMaster"
HorizSync 31.5 - 60
VertRefresh 60.0 - 70.0
EndSection
Section "Device"
#VideoRam 131072
# Insert Clocks lines here if appropriate
Identifier "NVIDIA GeForce"
Driver "nvidia"
Option "NoLogo" "true"
Option "TwinView" "true"
Option "TwinViewOrientation" "LeftOf"
Option "SecondMonitorHorizSync" "30-50"
Option "SecondMonitorVertRefresh" "60"
# Option "MetaModes" "1440x900, 1440x900; 1024x768, 1024x768"
EndSection
Section "Screen"
Identifier "Screen 1"
Device "NVIDIA GeForce"
Monitor "NEC LCD1530V"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 8
Modes "1024x768"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1024x768"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x768"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen 2"
Device "NVIDIA GeForce"
Monitor "Samsung SyncMaster"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 8
Modes "1440x900"
EndSubSection
EndSection
Anyone have an idea?
EDIT: Oh snaps. I just did a pacman -Syu and it upgraded Arch Linux to 0.8 and the 2nd monitor stopped working.

Installing Elements 11 on Mac. Need help with install error "Setup wants to make changes."

Installing Elements 11 on Mac 10.8.2. Need help with install error: Setup wants to make changes. Type your password to allow this." After entering Adobe password, nothing happens. Locked from further installation. Any ideas? Adobe phone support could not help.

Just before letting changes (installation in this case) be made on the system, Mac OS prompts for password & this has to be the Mac system password. This password prompt is the system's own native prompt & would accept the system password only. Please make sure it is the right system password (all/admin rights) and the installaion should run.

I think I need help with driver (software) settings for D110a

I think I need help with driver (software) settings for D110a all-in-one
Product: D110a all-in-one
OS: Windows XP Professional
Error messages: None
Changes before problem appeared: None--new installation
The quality of photo images (mostly JPG files) in printouts is awful even though the files display beautifully on the PC screen. I am using
IrfanView software for displaying/printing. As far as I can tell, IrfanView is not the problem.
When I print the same images on a Deskjet 5150 attached to a different PC also running XP Pro and IrfanView, the quality of the printouts is at
least acceptable, Some would probably say good or very good.
It's dificult to explain in words the problem with the printouts. A picture of really pretty vegetables (squashes, tomatoes, watermelon, etc) comes
out much too red. Moreover, the red, which appears shaded on the screen, seems to be all one shade in the D110a printouts.
Something similar happens to a view of a huge tree in full leaf. On screen, there are subtle variations in the "greenness" of the leaves. In the
printout, all green is the same shade. In the same printout, the trunk of the tree is all a single shade of grey. It isn;t even obvious that the
trunk is a round, solid object.
I liken the effect to audio that disappears entirely when you lower the volume and gets clipped into square waves in even moderately loud passages.
I don't know whether the D110a driver software permits adjusting the parameters that appear to be set incorrectly, and if adjustments are possible,
how I would identify which parameters to adjust, how I would access them, or how I would adjust them. I'm hoping that someone can help. Thanks.
I forgot to mention that I have used the diagnostic application and it tells me that there are no problems.
e-mail me at [email protected]

brazzmonkey wrote:
Hi everyone,
I noticed the following message when network starts on my gateway
Warning: This functionality is deprecated.
Please refer to /etc/rc.conf on how to define a single wired
connection, or use a utility such as netcfg.
Then I realized the way network settings should be written in rc.conf has changed. But I can't figure out how this should be done.
Currently, my set up is the following (old way):
INTERFACES=(eth0 eth1)
eth0="dhcp"
eth1="eth1 192.168.0.10 netmask 255.255.255.0 broadcast 192.168.0.255"
ROUTES=(!gateway)
eth0 is on DHCP because the IP is dynamically assigned my ISP.
eth1 has a fix IP because it's on the LAN side.
No problem to use DHCP on eth0 with the new settings.
But for eth1, I don't know what I am supposed to write for gateway.
Wiki isn't clear on that one either, and it looks like many articles still refer to the old way.
Any guidance appreciated, thanks.
brazzmonkey,
you can't define 2 interfaces the old way (even though I saw some tricky workaround somewhere in the forums).
Use, f.e., netcfg:
Comment your old lines.
In /etc/rc.conf insert:
NETWORKS=(Eth0-dhcp Eth1-static)
DAEMONS=(..... !network @net-profiles ....)
In /etc/network.d create 2 files:
First one is named Eth0-dhcp.
Contents:
CONNECTION="ethernet"
DESCRIPTION="Whatever text"
INTERFACE=eth0
HOSTNAME="your hostname"
IP="dhcp"
DHCP_TIMEOUT=15
Second one is named Eth1-static.
Contents:
CONNECTION='ethernet'
DESCRIPTION='whatver'
INTERFACE='eth1'
HOSTNAME='hname'
IP='static'
ADDR='192.168.0.10'
GATEWAY='192.168.0.1' # your gateway IP
DNS=('192.168.0.1') # your DNS server
The names Eth0-dhcp and Eth1-static are not magic. They just must be the same in rc.conf and in /etc/network.d.
Hope it helps.
mektub
PS: netcfg must be installed.
Last edited by Mektub (2011-07-20 14:07:05)

Need help with a activation code for Adobe Acrobat X Standard for my PC,, Don't have older version serial numbers, threw programs away, only have Adobe Acrobat X Standard, need a code to unlock program?

Need help with a activation code for Adobe Acrobat X Standard for my PC, Don't have older Version of Adobe Acrobat 9, 8 or 7.

You don't need to install the older version, you only need the serial number from your original purchase. If you don't have them to hand, did you register? If so, they should be in your Adobe account. If not you really need to contact Adobe, though it isn't clear they will be able to do anything without some proof of purchase etc.

I need help with downgradeing my ios for my ipod touch 4th gen

i need help with downgradeing my ios for my ipod touch 4th gen

As has alwys been the case, you cannot go back.
Sorry

[solved]Need help with a bash script for MOC conky artwork.

I need some help with a bash script for displaying artwork from MOC.
Music folders have a file called 'front.jpg' in them, so I need to pull the current directory from MOCP and then display the 'front.jpg' file in conky.
mocp -Q %file
gives me the current file playing, but I need the directory (perhaps some way to use only everything after the last '/'?)
A point in the right direction would be appreciated.
thanks, d
Last edited by dgz (2013-08-29 21:24:28)

Xyne wrote:
You should also quote the variables and output in double quotes to make the code robust, e.g.
filename="$(mocp -Q %file)"
dirname="${filename%/*}"
cp "$dirname"/front.jpg ~/backup/art.jpg
Without the quotes, whitespace will break the code. Even if you don't expect whitespace in any of the paths, it's still good coding practice to include the quotes imo.
thanks for the tip.
here it is, anyhow:
#!/bin/bash
filename=$(mocp -Q %file)
dirname=${filename%/*}
cp ${dirname}/front.jpg ~/backup/art.jpg
then in conky:
$alignr${execi 30 ~/bin/artc}${image ~/backup/art.jpg -s 100x100 -p -3,60}
thanks for the help.
Last edited by dgz (2013-08-29 21:26:32)

Proper DNS Setup for SLS

I have a new MacMini SLS and I need to make sure I am doing things right. I have BrightHouse Business Cable service with 5 static and one with RDNS for apple.ourdomain.com pointed at 1 of the IP's which is currently connected to our new AEBS. The AEBS is DHCP for LAN side and has been setup with ISP DNS.
When setting up SLS, the server finds that it's internet hostname is apple.domain.com as it should but computer hostname is just always set to apple. Once server is running all e-mail sent comes from [email protected] instead of domain.com which is fixed by adding an alias in the hosting section of mail. But the server itself in DNS is set for the domain apple.domain.com instead of domain.com with an NS of apple.domain.com is this ok? If during setup I change apple.domain.com to just domain.com then dns looks funny again as the domain would be right but the ns is then just set to domain.com instead of apple.domain.com so either way in my mind it's wrong. I just want to do it once and right so that the server runs smoothly and I am not sure what to do.

Works out just fine.
Primary address = 10.0.200.2
Current HostName = apple.ourdomain.com
DNS HostName = apple.ourdomain.com
The names match. There is nothing to change.
dirserv:success = "success"

Hi i need help with getting my homework for school

im in a nine week class that ends tommorw and need help go\etting my program working properly these are the requirements ofr the assignments:
Modify the Inventory Program by adding a button to the GUI that allows the user to move
to the first item, the previous item, the next item, and the last item in the inventory. If the
first item is displayed and the user clicks on the Previous button, the last item should
display. If the last item is displayed and the user clicks on the Next button, the first item
should display.
· Add a company logo to the GUI using Java graphics classes.
Modify the Inventory Program to include an Add button, a Delete button, and a Modifybutton on the GUI. These buttons should allow the user to perform the corresponding actions on the item name, the number of units in stock, and the price of each unit. An item added to the inventory should have an item number one more than the previous last item. Add a Save button to the GUI that saves the inventory to a C:\data\inventory.dat file. Use exception handling to create the directory and file if necessary. Add a search button to the GUI that allows the user to search for an item in the inventory by the product name. If the product is not found, the GUI should display an appropriate message. If the product is found, the GUI should display that products information in the GUI. Post final .class and .java files as an attachment.
this is what i have there are three java files im puttong in here
first is the panel frame
import java.awt.GridLayout;
import java.awt.BorderLayout;
import java.awt.FlowLayout;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.JButton;
import javax.swing.JLabel;
import java.awt.GridBagLayout;
import java.awt.GridBagConstraints;
import java.awt.Component;
import javax.swing.SwingConstants;
import javax.swing.Icon;
import javax.swing.JComboBox;
import javax.swing.JTextArea;
import javax.swing.JList;
import java.util.*;
import java.text.NumberFormat;
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
import java.net.URL;
import java.io.*;
import java.util.Scanner;
import javax.swing.JOptionPane;
import java.text.NumberFormat;
public class PanelFrame extends JFrame
     private JPanel buttonJPanel; // panel to hold buttons
     private JButton buttons[]; // array of buttons
     private JLabel label1; // JLabel iventory number
     private JLabel label2; // JLabel product name
     private JLabel label3; // JLabel product price
     private JLabel label4; // JLabel product in stock
     private String p_ProductName; // private variable for the employee name.
     private int p_UnitCount; // private variable for the hours worked.
     private double p_UnitPrice; // private variable for the hourly wage.
     private int p_ItemNumber; // private inventory number
     //create inventory object
     Inventory myInventory = new Inventory ();
// no-argument constructor
public PanelFrame()
super( "Panel Demo" );
//Add items to the inventory within the Invntory
          myInventory.addItem(new productinfo(1,"Html a Begginers Guide",14,29.99));
          myInventory.addItem(new productinfo(2,"Html 4 for Dummies",6,29.99));
          myInventory.addItem(new productinfo(3,"Visio Step by Step",7,24.99));
          myInventory.addItem(new productinfo(4,"APA Publication Manual",14,47.99));
          myInventory.addItem(new productinfo(5,"The Gregg Reference Manual",14,37.56));
setLayout( new FlowLayout() ); // set frame layout
// JLabel constructor with a string argument
          label1 = new JLabel( "Inventory Number:%s: %d\n ",p_ItemNumber );
          label1.setToolTipText( "This is Inventory number" );
          add( label1 ); // add label1 to JFrame
          label2 = new JLabel( "\n\nProduct Name: %s: %s\n", p_ProductName);
          label2.setToolTipText( "This is Product Name" );
          add( label2 ); // add label1 to JFrame
          label3 = new JLabel( "\n\nPrice : %s:$%.2f\n",p_UnitPrice );
          label3.setToolTipText( "This is product Price");
          add( label3 ); // add label1 to JFrame
          label4 = new JLabel( "\n\nQuanity %s: %d\n",p_UnitCount);
          label4.setToolTipText( "This is Quanity in stock: " );
          add( label4 ); // add label1 to JFrame
buttons = new JButton[ 4 ]; // create buttons array
buttonJPanel = new JPanel(); // set up panel
buttonJPanel.setLayout( new GridLayout( 1, buttons.length ) );
          String names[] = { "First", "Previous", "Next", "Last" };
          JButton buttons[] = new JButton[ names.length ];
          // create and add buttons
          for ( int count = 0; count < buttons.length; count++ )
          buttons[ count ] = new JButton( names[ count ] );
          buttonJPanel.add( buttons[ count ] ); // add button to panel
          } // end for
// setup the logo for the GUI ...image needs to be in same directory as source code
          URL url = this.getClass().getResource("book103.gif");
          Image img = Toolkit.getDefaultToolkit().getImage(url);
          // scale the image so that it'll fit in the GUI
          Image scaledImage = img.getScaledInstance(100, 100, Image.SCALE_AREA_AVERAGING);
          // create a JLabel with the image as the label's Icon
          Icon logoIcon = new ImageIcon(scaledImage);
          JLabel companyLogoLabel = new JLabel(logoIcon);
          companyLogoLabel.setBorder(BorderFactory.createEmptyBorder(3,3,3,3));
          // add the logo to the GUI
          getContentPane().add(companyLogoLabel, BorderLayout.WEST);
add( buttonJPanel, BorderLayout.SOUTH ); // add panel to JFrame
} // end PanelFrame constructor
} // end class PanelFrame

this is the original part again with the code tag added
import java.awt.GridLayout;
import java.awt.BorderLayout;
import java.awt.FlowLayout;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.JButton;
import javax.swing.JLabel;
import java.awt.GridBagLayout;
import java.awt.GridBagConstraints;
import java.awt.Component;
import javax.swing.SwingConstants;
import javax.swing.Icon;
import javax.swing.JComboBox;
import javax.swing.JTextArea;
import javax.swing.JList;
import java.util.;
import java.text.NumberFormat;
import javax.swing.;
import java.awt.;
import java.awt.event.;
import java.net.URL;
import java.io.*;
import java.util.Scanner;
import javax.swing.JOptionPane;
import java.text.NumberFormat;
public class PanelFrame extends JFrame
private JPanel buttonJPanel; // panel to hold buttons
private JButton buttons[]; // array of buttons
private JLabel label1; // JLabel iventory number
private JLabel label2; // JLabel product name
private JLabel label3; // JLabel product price
private JLabel label4; // JLabel product in stock
private String p_ProductName; // private variable for the employee name.
private int p_UnitCount; // private variable for the hours worked.
private double p_UnitPrice; // private variable for the hourly wage.
private int p_ItemNumber; // private inventory number
//create inventory object
Inventory myInventory = new Inventory ();
// no-argument constructor
public PanelFrame()
super( "Panel Demo" );
//Add items to the inventory within the Invntory
myInventory.addItem(new productinfo(1,"Html a Begginers Guide",14,29.99));
myInventory.addItem(new productinfo(2,"Html 4 for Dummies",6,29.99));
myInventory.addItem(new productinfo(3,"Visio Step by Step",7,24.99));
myInventory.addItem(new productinfo(4,"APA Publication Manual",14,47.99));
myInventory.addItem(new productinfo(5,"The Gregg Reference Manual",14,37.56));
setLayout( new FlowLayout() ); // set frame layout
// JLabel constructor with a string argument
label1 = new JLabel( "Inventory Number:%s: %d\n ",p_ItemNumber );
label1.setToolTipText( "This is Inventory number" );
add( label1 ); // add label1 to JFrame
label2 = new JLabel( "\n\nProduct Name: %s: %s\n", p_ProductName);
label2.setToolTipText( "This is Product Name" );
add( label2 ); // add label1 to JFrame
label3 = new JLabel( "\n\nPrice : %s:$%.2f\n",p_UnitPrice );
label3.setToolTipText( "This is product Price");
add( label3 ); // add label1 to JFrame
label4 = new JLabel( "\n\nQuanity %s: %d\n",p_UnitCount);
label4.setToolTipText( "This is Quanity in stock: " );
add( label4 ); // add label1 to JFrame
buttons = new JButton[ 4 ]; // create buttons array
buttonJPanel = new JPanel(); // set up panel
buttonJPanel.setLayout( new GridLayout( 1, buttons.length ) );
String names[] = { "First", "Previous", "Next", "Last" };
JButton buttons[] = new JButton[ names.length ];
// create and add buttons
for ( int count = 0; count < buttons.length; count++ )
buttons[ count ] = new JButton( names[ count ] );
buttonJPanel.add( buttons[ count ] ); // add button to panel
} // end for
// setup the logo for the GUI ...image needs to be in same directory as source code
URL url = this.getClass().getResource("book103.gif");
Image img = Toolkit.getDefaultToolkit().getImage(url);
// scale the image so that it'll fit in the GUI
Image scaledImage = img.getScaledInstance(100, 100, Image.SCALE_AREA_AVERAGING);
// create a JLabel with the image as the label's Icon
Icon logoIcon = new ImageIcon(scaledImage);
JLabel companyLogoLabel = new JLabel(logoIcon);
companyLogoLabel.setBorder(BorderFactory.createEmptyBorder(3,3,3,3));
// add the logo to the GUI
getContentPane().add(companyLogoLabel, BorderLayout.WEST);
add( buttonJPanel, BorderLayout.SOUTH ); // add panel to JFrame
} // end PanelFrame constructor
} // end class PanelFrame

I need help with exporting 720p video for youtube.

Hi everyone, I have been using Adobe premeir for almost a year now and I love it, as its very professional and powerful. I used to edit Standard with no problem, then export the full unconverted file (wmv) and run it though Windows Movie Maker to compress it (haha yeah I know its crazy.) Now that I got a camera capable of shooting HDV I want to use it. Im just wondering the following:
1.What format should I export with in Adobe Media Encoder? (Original Raw footage files from Camera are MOV formatted)
2.What should I set the Bitrate to?
3.How do I export to flash without it being to large of a file (Under 200mb's for a 5 minute video) and have it not choppy or pixelated?
4.How do I speed up exporting, how many passes should I do?
5.What overall is the best setup for youtube?
I also noticed a small glitch, and its when I export normally (full size, no compression) and run it though a compressor it cuts out all of the titles, and just flashes them for a milisecond. Its really odd. It only happens when I export in a certain format in which I cannot quite remember. Anyways.. thanks in advance for helping me. Its very appreciated.
NineLivesProductions

perform a search using the term export for web and it should throw up some ideas.
here's one for starters:
http://discussions.apple.com/thread.jspa?messageID=2309121&#2309121
If you're using flip4mac to convert to wmv, the trial stops at 30 seconds - you need at least wmvstudio to export to wmv:
http://www.flip4mac.com/wmv.htm

Need help with output type EDI for ERS

All,
I want to be able to run and ERS settlement and have the invoices created sent via EDI/XML to the supplier.   I have several questions on the set up.
1) I have output type ERS6 which is defined as ERS EDI. I assume because it does not start with Z* this is SAP standard, so I shouldn't have to modify any of this.
2) I've added my supplier to this output type.
3) I assume I need to create a partner profile for this supplier? If so can someone tell me the message type to use?
Is there any set up I'm missing in this process?   I've executed ERS but do not get an idoc and I'm fairly certain it's because I haven't done the partner profile set-up.
Thanks for your help.
Sandra

Hi,
You don't have to modify thise setup unless you have any customized requirement.
You are missing partner profile setup.Carry out the setup and run MRRL tcode to create the idocs
Enter the following values using tcode WE20.
Field                                       Value
Message type                         GSVERF
Partner type                             LI (vendor)
Partner function                        LF (vendor)
Port                                         SUBSYSTEM ( Port to your middleware)
Output mode                            such as Collect IDocs
Basic type                                GSVERF01
Application                                 MR
Output type                                ERS6 or the type you have defined
Regards,
Karuna

Help with project/folder setup for new flex project??

Hello all,
I need help deciding how to set up my projects for a new flex application we're developing.
We have an in-house custom java/jsp "framework". This framework has JSP pages for administering applications that are built using this framework. One part of the framework generates all java base and model objects from our database tables to be used in the new application.
The new application will have a back-office part (Adobe AIR) and a web facing part (Adobe Flex). Both the AIR and Flex parts of the application need to access the java model objects via AS3 classes (I believe I'll do this using remoteobject).
My questions are as follows:
After I create the base and model AS3 classes that remoteobject with the java classes can I put these in a common library project so both my AIR and Flex app can access common AS3 code. I feel I should do this to keep from duplicating code by copying the AS3 classes in both my AIR and Flex projects. Can you give my any examples or links to information on how to do this??
I plan to also create a common java project for all base and model objects generated from my db tables so that the common library project with AS3 classes could remoteobject interface with the java classes in the java project. I would like to keep all of my business logic in the java model classes. Does this seem appropriate for the projects/setup listed above?
Here are the projects I think I need in Flex Builder.
FlexWebApp
AIRBackOfficeApp
JavaApp - Common
AS3FlexLibraryApp - Common
The FlexWebApp and AIRBackOfficeApp will reference the AS3FlexLibraryApp and the AS3FlexLibraryApp will remoteobject to the java classes in JavaApp.
Any help or direction with this is greatly appreciated.
Thanks,
Whitney

Hi,
Please post only once (do not post same thread across multiple forums).
help with Financials setup from very basics...
Re: help with Financials setup from very basics...
Regards,
Hussein

Need Help With ACS LDAP setup to Query AD

I have 2 Win 2003 ADs, one of them is configured and working under Windows Database (using remote agent) configuration. I am trying to setup the second AD with Generic LDAP setup. I want to know what exactly I should use in the fields UserObjectType and Class, and GroupObjectType and Class for Windows 2003 AD. All Cisco documents give example of Netscape LDAP syntax. I was told by our server admin. what to put under Admin DN, CN=myid,OU=mygroup,OU=myorg,DC=mydomain,DC=com
I have both user & group directory subtree fields filled with DC=mydomain,DC=com.
I am using the ip address for Primary LDAP server, and port is 389, LDAP version 3 is checked.
Is any of these DC, OU, etc. case sensitive?
With all entries that I have tried, when I go to map a group, I am getting error "LDAP server NOT reachable. Please check the configuration". My ACS can ping the domain controller's IP address fine.
Please help. Thank you in advance,
Murali

Murali,
These references may help...
http://download.microsoft.com/download/3/d/3/3d32b0cd-581c-4574-8a27-67e89c206a54/uldap.doc
http://www.microsoft.com/technet/archive/winntas/plan/dda/ddach02.mspx?mfr=true
http://technet.microsoft.com/en-us/library/aa996205.aspx
Regards,
Richard

I need help with proper DNS setup for 10.5.8 Server

Similar Messages

Maybe you are looking for