I need help with restoration of two very old photos.

The first photo, dated 1883, is printed on cardboard. The picture is faded of course, but it appears the cardboard fibers are showing through. Any attempt to sharpen just sharpens the fibers. I tried replacing the color of the fibers and that didn't work either.
The second photo, again very old, has been creased and wrinkled as though someone balled it up in their hand. It is black and white. I haven't a clue on how to fix this.
Thank you for any help
Frances

Hi Frances,
> The first photo, dated 1883, is printed on cardboard. The picture is
> faded of course, but it appears the cardboard fibers are showing
> through. Any attempt to sharpen just sharpens the fibers. I tried
> replacing the color of the fibers and that didn't work either.
Are you sure you are seeing the cardboard fibers or was the photo
printed on imitation canvas & that is what you are seeing. Either way
about all you can do is use the smudge tool set at one pixel & go around
& smooth out what looks like fibers or just leave it looking like canvas.
> The second photo, again very old, has been creased and wrinkled as
> though someone balled it up in their hand. It is black and white. I
> haven't a clue on how to fix this.
You can try ironing the photo to get it flat. Place the photo face down
on a flat smooth surface & place a moist paper over the back & iron with
a warm iron until most of the wrinkles are out. Then scan it at about
300 DPI. You can then either use the smudge tool in paint mode to fill
the cracks or use a small paint brush.
HTH,
Alex B,

Similar Messages

  • HT1766 I need help with restore from bachup

    I NEED HELP WITH MY IPAD RESTORE FROM BACKUP

    This is the iPod touch forum and you are not providing any information to help you.

  • I need help with Restoring my iPod. =/

    Okay, so I put music on my iPod using WinAmp, right? Well, the music was unorganized and the quality was terrible, so I downloaded iTunes and transferred the music to iTunes from WinAmp. I also wanted to restore my iPod so I could re-add the music files to it.
    NOW, iTunes tells me that my iPod is in recovery mode and needs to be restored. So I restore it, and it STILL tells me it needs to be restored. I swear, I've "restored" this thing like eleven times.
    Oh, and to add to the problem, it's suddenly telling me that my iPod has encountered a problem while restoring itself by an "unknown error"
    *PLEAE HELP!* I would give you everything I own if I knew you personally, I just want my music. lol

    Have you had a chance to look at this troubleshooting page? If not, have a look at the bottom section that covers what to try if the message keeps reappearing: iTunes has detected an iPod in recovery mode - Use iTunes to restore
    Towards the end it says "If after restoring your iPod, the message described above reappears, the iPod drive letter may need to be reassigned. See the "Change the Drive Letter" section of this document for steps to assign a different drive letter" which contains a link to this article: Windows confuses iPod with network drive and iTunes may exhibit strange behavior in relation to the iPod.

  • Need Help With Restoring My Ipod, Problem seems Unique, please help.

    Hi, I have a mini as most of you others do as well. I will outline all the problems and the solutions I have taken to solve these problems, yet they have all failed.
    1) When trying to turn my IPOD on I run across the Folder with the Exclamation Point
    SOLUTIONS: I have tried to reset, and change the format of the drive, both have failed to solve the problem. When I try to connect the ipod to the computer (in disk mode and out of disk mode) it says The Ipod is corrupt it may need to be restored. So I restore the IPOD and it says Disconnect it and replug it into a power source (which I interpret as the wall charger). After I disconnect it (I have tried just disconnecting it when the menu restarts to the APPLE and disconnecting it by manually selecting the IPOD from the source list to disconnect after waiting) and plugging it into the wall charger I get the folder with the exclamation point again. It seems to be a cycle, and I don't know how to break it. If it is a faulty harddrive I guess I will try to replace it using the method outlined in other posts, but if I'm missing anything please let me know. Thank you.

    That's the faulty drive/OS indicator.
    If restoring the iPod from iTunes doesn't work, it's likely that the drive has died and needs to be replaced.
    It's a fairly easy task with the proper tools.

  • I just bought my MacBook Pro 13" and I tried to install an anti virus but then it went into a grey folder with a question mark I need help with restoring the iOS please

    I need help taking out the grey folder with the question mark and I've try everything except the CD thing because my MacBook didn't come with one so I really need help please

    What anti-virus software did you install? Although there's a lot of bad anti-virus software out there, no anti-virus software should cause such a problem. A gray screen with a flashing question mark on a folder means that no bootable system could be found, which means that the system was badly damaged or corrupt. Even installing bad software would not normally cause that, so either there was something badly wrong with the system already or the anti-virus software you tried to install was really, really bad!
    As mende1 says, you need to reinstall the system at this point. After your system is back up and running, read my Mac Malware Guide. If, after reading that, you want anti-virus software, use one of the programms recommended in that guide.

  • Need help with restoring my phone

    CAN U PLEASE HELP ME RESTORE MY FONE???

    Connect to iTunes on the computer you usually Sync with and “ Restore “...
    http://support.apple.com/kb/HT1414
    If necessary Place the Device into Recovery mode...
    http://support.apple.com/kb/HT1808

  • Need help with restoring from backup.

    My wife's macbook pro ( 2.53 processor 4 GB Ram) recently had its hard drive call it quits.
    I ran a back up the day prior to taking it to the Apple store, they replaced it with a 500 GB hard drive for very cheap. That I am very grateful for.
    I came home, wife has already logged on/set up the laptop as a new laptop. Apple upgraded the OS while it was in their possession to 10.9.2. The last back up was on Mountain lion 10.8.
    How can I get all the files (iPhoto being hugely important) from the 10.8 backup onto this 10.9 laptop? I can't restore from Time Machine because it isn't the correct OS nor is the same laptop (in its mind due to new hard drive and her setting up as a new laptop.)
    I greatly appreciate the help in advanced, any links or "How to" threads would be wonderful!!!

    Look at the options presented here:
    http://pondini.org/OSX/Setup.html
    Ciao.

  • Need help with union of two selects

    select 1 selects items for a timespan.
    But if there is nothing found at one date,
    the date is not returned so I want a union with a calendar table
    Both selects work but how to make the union?
    Thanks for any help!
    select 1:
    SELECT COUNT(*) COUNT,
    fb_operation prodstep,
    kalenderwoche datum
    FROM stoerung,
    kalender
    WHERE str_kommenzeit > to_date('13.06.2006', 'dd.mm.yyyy')
    AND str_kommenzeit < to_date('11.07.2006', 'dd.mm.yyyy')
    AND to_char(str_kommenzeit,'dd.mm.yyyy') = to_char(fulldate,'dd.mm.yyyy')
    GROUP BY fb_operation,
    kalenderwoche
    ORDER BY fb_operation,
    kalenderwoche
    select 2:
    SELECT kalenderwoche datum
    from kalender
    WHERE fulldate > to_date('13.06.2006', 'dd.mm.yyyy')
    AND fulldate < to_date('11.07.2006', 'dd.mm.yyyy')

    THANKS A LOT!
    I tested it and it gave me good results
    the problem I still have is that then I expand the Date to
    to_date('11.12.2006') I just get the weeks
    that contain data. But I need all weeks that are selected, if there is
    no data the other fields shall be null or 0.
    This is much too difficult for me perhaps you can also help me with this!
    select * from
    (SELECT COUNT(*) COUNT,
    fb_operation prodstep,
    kalenderwoche datum
    FROM stoerung,
    kalender
    WHERE str_kommenzeit > to_date('13.06.2006', 'dd.mm.yyyy')
    AND str_kommenzeit < to_date('11.12.2006', 'dd.mm.yyyy')
    AND to_char(str_kommenzeit,'dd.mm.yyyy') = to_char(fulldate,'dd.mm.yyyy')
    GROUP BY fb_operation,
    kalenderwoche
    ORDER BY fb_operation,
    kalenderwoche) A,
    (SELECT kalenderwoche datum
    from kalender
    WHERE fulldate > to_date('13.06.2006', 'dd.mm.yyyy')
    AND fulldate < to_date('11.12.2006', 'dd.mm.yyyy') ) B
    where A.datum = B.datum (+)

  • I need help with restoring a previous Firefox session from the other day, that seems to not be opening back up.

    I had many tabs opened in my Firefox browser and usually I can close the browser and reopen it, and the tabs are still there.
    After restarting my computer, I went to Firefox and it started with a new session, without the option to restore the previous session.
    I have a feeling that there is a way to restore these tabs, but in the case that it is not, then I'll just have to accept that.
    I was thinking maybe a backup file of the tabs, like how the bookmarks can be backed up.
    The tabs were important, so I just wanted to use this as the last resort to see if they can be restored in some way, shape or form.
    This is the first time that I'm using this, so I'm hoping that someone can help me with this issue, as I'm sure that I am not the only one that has ever experienced this problem.

    You can make a backup copy of the file sessionstore.js in the profile folder.
    *http://kb.mozillazine.org/sessionstore.js
    *Help > Troubleshooting Information > Profile Directory: Open Containing Folder
    You can also bookmark all open tabs via the right-click context menu of a tab on the tab bar.

  • Need help with restore backup from icloud

    Hi.
    A few days ago I've deleted data and settings from my iPad and updated it to 8.1.2. Then, I wanted to restore backup from iCloud, but got error, that I can't restore my backup. Tried three last copies, other wifi, many solutions from support - the same error. Support said me, my backups are broken. And they can't help me.
    OK. I've found some programs in internet for download backups and restore it. Only trials. And they work, they see my backups, download and show me my data. I need to buy program to restore data to my iPad. I don't want to buy, because, if that programs can restore my data, why Apple support can't do this?

    Photos and videos from your camera roll are backed up to iCloud when you do an iCloud backup.
    This article tells you how to restore an iCloud backup:
    http://support.apple.com/kb/TS4036

  • Need help with restore problem for itunes v 7.6.2

    I just installed itunes version 7.6.2 and I plugged my ipod into my computer and hit the restore button so i can erase and redo my ipod. Then when I plugged my ipod into my computer my ipod is stuck on the restore mode and i can't see the information bar or the music bar under my ipod name. I can only upload music and eject my ipod. PLEASE HELP!!! this is so fustrating.
    this is what the screen looks like when i click on my ipod or plug it in.

    Minimize your iTunes, right click on your Desktop, click Properties, click the Settings tab. Increase your screen resolution to 1024 x 768. If it looks OK, click OK. You should be able to continue with your iPod.
    CG

  • Need Help With Save As function Very Important

    i working on a project and i have to create a Save As function for it. When you click on Save As its supposed to open a dialog window where u can choose the where you would like to save the file and what you would like to name it. I know there is alot wrong with my code but i'm not sure on how to fix it so any and all help is greatly appreciated
    private void doSaveAs(){
              //display file dialog
              FileDialog fDialog2 = new FileDialog (this, "Save As...", FileDialog.SAVE);
              fDialog2.setVisible(true);
              //Set the file name chosen by user
              String name = fDialog2.getFile();
              // user canceled file selection, return without doing anything.
              if(name == null)
                   return;
              fileName = fDialog2.getDirectory() + name;
              // Try to create a file writer
              FileWriter writer = null;
              try{
                   writer = new FileWriter(fileName);
              } catch (IOException ioe){
                   MessageDialog dialog = new MessageDialog (this, "Error Message",
                             "Error writing the file: "+ioe.toString());
                   dialog.setVisible(true);
                   return;
              BufferedWriter bWriter = new BufferedWriter(writer);
              //Try to write the file
              StringBuffer textBuffer = new StringBuffer();
              try {
                   String textLine = bWriter.write(2);
                   while (textLine != null) {
                        textBuffer.append(textLine + '\n');
                        textLine = bWriter.write(name);
                   bWriter.close();
                   writer.close();
              } catch (IOException ioe){
                   MessageDialog dialog = new MessageDialog (this, "Error Message", "Error writing file: "+ioe.toString());
                   dialog.setVisible(true);
                   return;
         setTitle("JavaEdit " +name);     // reset frame title
         text.setText(textBuffer.toString());
    null

    And again with indentation
       private void doSaveAs(){
       //display file dialog
       FileDialog fDialog2 = new FileDialog (this, "Save As...",     
       FileDialog.SAVE);
          fDialog2.setVisible(true);
       //Set the file name chosen by user
       String name = fDialog2.getFile();
       // user canceled file selection, return without doing anything.
       if(name == null)
          return;
       fileName = fDialog2.getDirectory() + name;
       // Try to create a file writer
       FileWriter writer = null;
          try{
             writer = new FileWriter(fileName);
          } catch (IOException ioe){
          MessageDialog dialog = new MessageDialog (this, "Error Message", "Error writing the file: "+ioe.toString());
                dialog.setVisible(true);
                return;
       BufferedWriter bWriter = new BufferedWriter(writer);
       //Try to write the file
       StringBuffer textBuffer = new StringBuffer();
       try {
          String textLine = bWriter.write(2);
          while (textLine != null) {
             textBuffer.append(textLine + '\n');
             textLine = bWriter.write(name);
          bWriter.close();
          writer.close();
       } catch (IOException ioe){
          MessageDialog dialog = new MessageDialog (this, "Error Message", "Error writing file: "+ioe.toString());
          dialog.setVisible(true);
          return;
       setTitle("JavaEdit " +name); // reset frame title
       text.setText(textBuffer.toString());
    }

  • Need help with restore please

    i want to restore my phone as i deleted messages i need
    when i connected my phone is said restore last date was 7/1/14
    i let the phone backup and when i went to restore the date i saw previously was not there for me to choose
    i restored my computer thinking maybe i would get the date back but no no luck...
    how can i get the date back to the last one before this one today
    please help

    If it's disabled then it's too late to take a backup. There are instructions on this page for resetting a disabled device : http://support.apple.com/kb/HT1212
    If your computer's iTunes isn't recognising the phone then do you have the current version of iTunes installed on it ? There are also some troubleshooting on this page for a device not being recognised : http://support.apple.com/kb/TS1538 (if using a Mac : http://support.apple.com/kb/TS1591)

  • TS1424 need help with error (0x80092013) windows,  very frustrated...please help.

    Very frustrated music lover but cant even sign in to my account without various errors occurring. ...the most recent onevhappened today...it seems Apple cant help me so please if anyone out there can I would be very greatful.

    I am getting similar error... I check stuff you guys mention earlier... and I am still getting and error..
    NewOrder class just have bunch of method get and set..
    public class NewOrder
    String customer_name;
    int customer_number;
    int quantity_order;
    int unit_price;
    *Get Methods.
    public String getcustomer_name()
    return customer_name;
    public int getcustomer_number()
    return customer_number;
    public int getquantity_order()
    return quantity_order;
    public int getunit_price()
    return unit_price;
    * Set methods.
    public String setcustomer_name(String name)
    customer_name=name;
    return customer_name;
    public void setcustomer_number(int num)
    customer_number=num;
    public void setquantity_order(int quantity)
    quantity_order=quantity;
    public void setunit_price(int price)
    unit_price=price;
    public class NewHandlingShipping extends NewOrder
    int quantityorder=10;
    int id=001;
    String myName="ABC Company";
    int cost=10;
    int ship=4;
    public class handling
    NewHandlingShipping cust_name = new NewHandlingShipping();
    NewHandlingShipping cus_id = new NewHandlingShipping();
    NewHandlingShipping quantity = new NewHandlingShipping();
    NewHandlingShipping item_price = new NewHandlingShipping();
    cust_name.setcustomer_name(myName);
    cust_id.setcustomer_number(id);
    item_price.setunit_price(ship);
    quantity.setquantity_order(quantityorder);
    ship=4+cost;
    System.out.println("Your Order is $ " + ship);
    Getting and error on the bold stuff..
    error output...
    NewHandlingShipping.java:22: <identifier> expected
    System.out.println("Your Order is $ " + ship);
    - Please Help..

  • I need help with my memberships (two)

    I have two CC memeberships. I don't know how I got two. But it is ok if I can convert them to the special offer for a team (40% off). I spent so much time finding how to get help that I forgot the name of that type of account. Will someone plase inform me how to manage that transaction. I'll sign up for two years. Or if someone can make it ahppen and then inform me when it's done, I'd appreciate it.

    OK I got through the registration for two. It wants me to sign up for $139.98/mo. That Isn’t 40% off. I’d push the confirm button but not for $ 139.98/mo. Next, It is almost impossible to find SUPPORT. I sign in to CC and there is nowhere on any page that I got to where it indicates support. Is there any way to speak to a human? I’m 80. Don’t buy green bananas. This sucks. I want to sign up for two years and there was no place in the sign up page that allows it!  Please give clear instructions/URL’s whatever that will guide me, step by step, all the way through to where I have to go. Some week that I have clear I’ll try to find my way through the maze.

Maybe you are looking for

  • Message while creating a class method

    Hi all, I have created a class as local object. When i try to modify that class the following message is displayed. "You are not authorized to make changes (authorization object S_DEVELOP)"

  • Shaking image on external monitor when Satellite A200 is running on AC

    Hello I have this problem which is driving me crazy .... I bought an external monitor for my Toshiba Satellite A200-1s9 laptop but the problem with it is that the image, on the external monitor, is shaking. I tried another monitor, the same, another

  • Break point in smart form

    Dear Gurus.... I am new to smartforms. I have a report which is to be integrated with smart form. I want each PO should start from a new page. I have tried putting an alternative and command in main window but it doesnot solve my problem. Please help

  • SRM PO Changes are not transferred to Back end

    Hi All, I have a problem in PO changes. We are using extended classic scenario. User create PO in the portal and the PO will be transferred to the back end R/3 via RFC. Earlier in 4.7 we the PO's are updated with the changes. Recently we have upgrade

  • Re: Creation of Pipeline Purchase Order or Consignment

    Hello all, Can you all explain me how to create Pipeline Purchase Order or Contract., so that a proof of document is maintained. How is is done in SAP? Regards, Smitha