I need help with restoring a previous Firefox session from the other day, that seems to not be opening back up.

I had many tabs opened in my Firefox browser and usually I can close the browser and reopen it, and the tabs are still there.
After restarting my computer, I went to Firefox and it started with a new session, without the option to restore the previous session.
I have a feeling that there is a way to restore these tabs, but in the case that it is not, then I'll just have to accept that.
I was thinking maybe a backup file of the tabs, like how the bookmarks can be backed up.
The tabs were important, so I just wanted to use this as the last resort to see if they can be restored in some way, shape or form.
This is the first time that I'm using this, so I'm hoping that someone can help me with this issue, as I'm sure that I am not the only one that has ever experienced this problem.

You can make a backup copy of the file sessionstore.js in the profile folder.
*http://kb.mozillazine.org/sessionstore.js
*Help > Troubleshooting Information > Profile Directory: Open Containing Folder
You can also bookmark all open tabs via the right-click context menu of a tab on the tab bar.

Similar Messages

TS1702 I have the "Today is +" app on my Itouch. I have been using it for 2 years. I always email my backup to my home computer. I realized the other day that it stopped receiving the backup to my computer in July!    Help. now what?

I have the app "Today is +"   I have been using it for about 2 years. I usually send backup by email to my home computer. I noticed the other day that I have NOT been receiving my backups since July!   When I send it from my Itouch it does give me a "message sent." I have done all the updates and restarted my Itouch and computer. No luck. I have iOS 6.1.3.
Any help on this would be greatly appreciated.
Thanks

See:
iOS: Troubleshooting applications purchased from the App Store
Contact the developer/go to their support site
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod

I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in

I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio 2013?

For MS Visio (any version) only the appropriate version of Acrobat *PRO* provides PDFMaker for Visio.
For Visio 2013 specifically you must have Acrobat XI Pro (updated to at least 11.0.1).
See:
http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html
Be well...

I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio

I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio 2013?

For MS Visio (any version) only the appropriate version of Acrobat *PRO* provides PDFMaker for Visio.
For Visio 2013 specifically you must have Acrobat XI Pro (updated to at least 11.0.1).
See:
http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html
Be well...

My IPod is not showing up in my Itunes, I tried my phone as well and it is not coming up either. I have tried everything including uninstalling and reinstalling. It worked the other day but it is not working now. Please somebody help me!!! What to do?

Hello,
Can someone please help me!? I am trying to put music on my IPod and it was working the other day. I can not get itunes to recognize my Ipod. I have tried to unistall and reinstall Itunes. I have tried all the steps on the site and can't get it to come up. I tried my IPhone which was also showing up just the other day and it also is not showing in Itunes! Please help me. I need to be able to put music on my IPod for my work.

I have sorted it myself!!
Ipod is now in the top right corner, last time I clicked on it, it ejected it but by clicking on the actual ipod icon then it brings up your ipod. I restored it to factory settings and synced all my music and it now works again. Hope this can help anyone who ends up with the same problem.

HT1766 I need help with restore from bachup

I NEED HELP WITH MY IPAD RESTORE FROM BACKUP

This is the iPod touch forum and you are not providing any information to help you.

I need help with Restoring my iPod. =/

Okay, so I put music on my iPod using WinAmp, right? Well, the music was unorganized and the quality was terrible, so I downloaded iTunes and transferred the music to iTunes from WinAmp. I also wanted to restore my iPod so I could re-add the music files to it.
NOW, iTunes tells me that my iPod is in recovery mode and needs to be restored. So I restore it, and it STILL tells me it needs to be restored. I swear, I've "restored" this thing like eleven times.
Oh, and to add to the problem, it's suddenly telling me that my iPod has encountered a problem while restoring itself by an "unknown error"
*PLEAE HELP!* I would give you everything I own if I knew you personally, I just want my music. lol

Have you had a chance to look at this troubleshooting page? If not, have a look at the bottom section that covers what to try if the message keeps reappearing: iTunes has detected an iPod in recovery mode - Use iTunes to restore
Towards the end it says "If after restoring your iPod, the message described above reappears, the iPod drive letter may need to be reassigned. See the "Change the Drive Letter" section of this document for steps to assign a different drive letter" which contains a link to this article: Windows confuses iPod with network drive and iTunes may exhibit strange behavior in relation to the iPod.

Need Help With Restoring My Ipod, Problem seems Unique, please help.

Hi, I have a mini as most of you others do as well. I will outline all the problems and the solutions I have taken to solve these problems, yet they have all failed.
1) When trying to turn my IPOD on I run across the Folder with the Exclamation Point
SOLUTIONS: I have tried to reset, and change the format of the drive, both have failed to solve the problem. When I try to connect the ipod to the computer (in disk mode and out of disk mode) it says The Ipod is corrupt it may need to be restored. So I restore the IPOD and it says Disconnect it and replug it into a power source (which I interpret as the wall charger). After I disconnect it (I have tried just disconnecting it when the menu restarts to the APPLE and disconnecting it by manually selecting the IPOD from the source list to disconnect after waiting) and plugging it into the wall charger I get the folder with the exclamation point again. It seems to be a cycle, and I don't know how to break it. If it is a faulty harddrive I guess I will try to replace it using the method outlined in other posts, but if I'm missing anything please let me know. Thank you.

That's the faulty drive/OS indicator.
If restoring the iPod from iTunes doesn't work, it's likely that the drive has died and needs to be replaced.
It's a fairly easy task with the proper tools.

I just bought my MacBook Pro 13" and I tried to install an anti virus but then it went into a grey folder with a question mark I need help with restoring the iOS please

I need help taking out the grey folder with the question mark and I've try everything except the CD thing because my MacBook didn't come with one so I really need help please

What anti-virus software did you install? Although there's a lot of bad anti-virus software out there, no anti-virus software should cause such a problem. A gray screen with a flashing question mark on a folder means that no bootable system could be found, which means that the system was badly damaged or corrupt. Even installing bad software would not normally cause that, so either there was something badly wrong with the system already or the anti-virus software you tried to install was really, really bad!
As mende1 says, you need to reinstall the system at this point. After your system is back up and running, read my Mac Malware Guide. If, after reading that, you want anti-virus software, use one of the programms recommended in that guide.

Need help with restoring from backup.

My wife's macbook pro ( 2.53 processor 4 GB Ram) recently had its hard drive call it quits.
I ran a back up the day prior to taking it to the Apple store, they replaced it with a 500 GB hard drive for very cheap. That I am very grateful for.
I came home, wife has already logged on/set up the laptop as a new laptop. Apple upgraded the OS while it was in their possession to 10.9.2. The last back up was on Mountain lion 10.8.
How can I get all the files (iPhoto being hugely important) from the 10.8 backup onto this 10.9 laptop? I can't restore from Time Machine because it isn't the correct OS nor is the same laptop (in its mind due to new hard drive and her setting up as a new laptop.)
I greatly appreciate the help in advanced, any links or "How to" threads would be wonderful!!!

Look at the options presented here:
http://pondini.org/OSX/Setup.html
Ciao.

Need help with restoring my phone

CAN U PLEASE HELP ME RESTORE MY FONE???

Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414
If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808

I need help with restoration of two very old photos.

The first photo, dated 1883, is printed on cardboard. The picture is faded of course, but it appears the cardboard fibers are showing through. Any attempt to sharpen just sharpens the fibers. I tried replacing the color of the fibers and that didn't work either.
The second photo, again very old, has been creased and wrinkled as though someone balled it up in their hand. It is black and white. I haven't a clue on how to fix this.
Thank you for any help
Frances

Hi Frances,
> The first photo, dated 1883, is printed on cardboard. The picture is
> faded of course, but it appears the cardboard fibers are showing
> through. Any attempt to sharpen just sharpens the fibers. I tried
> replacing the color of the fibers and that didn't work either.
Are you sure you are seeing the cardboard fibers or was the photo
printed on imitation canvas & that is what you are seeing. Either way
about all you can do is use the smudge tool set at one pixel & go around
& smooth out what looks like fibers or just leave it looking like canvas.
> The second photo, again very old, has been creased and wrinkled as
> though someone balled it up in their hand. It is black and white. I
> haven't a clue on how to fix this.
You can try ironing the photo to get it flat. Place the photo face down
on a flat smooth surface & place a moist paper over the back & iron with
a warm iron until most of the wrinkles are out. Then scan it at about
300 DPI. You can then either use the smudge tool in paint mode to fill
the cracks or use a small paint brush.
HTH,
Alex B,

I am having difficulty playing most pogo games and need help with it. I have down loaded the recent version of java and am still unable to get the games to load. Is someone able to please help me ? Thank- You

I am seriously needing some help and guidance in getting my mac to help me play pogo games. I will be thrilled with any help to show and tell me what to do. Thank-You so much !

Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
Keychain Access ▹ Preferences ▹ First Aid
If the box marked Keep login keychain unlocked is not checked, check it.
Select
Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access.

Need help with SQL Query (query for certain IDs in a table and then IDs not in result set)

OK. This is hard to explain but that may be my problem in constructing the query.
I have a table that has a list of jobs. The jobs information in this table, among other things, is a short description of the job itself (think "title" in phrase form), date, and ID.
So I can query the table to get all the jobs for a particular grouping of IDs (the only ones I am interested in) that ran successfully for a given time period. But what I want are all the jobs that did not succeed (or therefore are not present in the table) for this group of jobs and for a certain date range. But these are not the only job id's in the table.
To get the successful ones I do the following:
SELECT id,short_desc FROM my_table where
            id IN('1230', '1231', '1232', '1239', '1244', '1245',
            '1246', '1247', '1248', '1272', '1280', '1281', '1282',
            '1283', '1284', '1285', '1286', '1249', '1250', '1251',
            '1252', '1253', '1255', '1233', '1234', '1235', '1236',
            '1237', '1238', '1256', '1257','1258', '1254', '1290','1310')
            AND the_date > = SYSDATE - 23/24
            AND to_char(the_date, 'DD-MON-YYYY') = TO_CHAR(CURRENT_DATE, 'DD-MON-YYYY')
I have tried to use another AND clause with NOT IN and the group or NOT EXISTS but that doesn't work as there are other jobs captured in this table with id's of course. I am only concerned with these id's:
IN('1230', '1231', '1232', '1239', '1244', '1245',
            '1246', '1247', '1248', '1272', '1280', '1281', '1282',
            '1283', '1284', '1285', '1286', '1249', '1250', '1251',
            '1252', '1253', '1255', '1233', '1234', '1235', '1236',
            '1237', '1238', '1256', '1257','1258', '1254', '1290','1310')
Someone said to use a temp table. I don't think I have permission and I haven't tried as I want to do this in one query if possible.
After thinking about this I am at a loss. I tried to do this in the front end but it just became too messy.

You do not need a physical temp table. You need an in-line view:
WITH list as (
              SELECT '1230' id FROM DUAL UNION ALL
              SELECT '1231' FROM DUAL UNION ALL
              SELECT '1232' FROM DUAL UNION ALL
              SELECT '1239' FROM DUAL UNION ALL
              SELECT '1244' FROM DUAL UNION ALL
              SELECT '1245' FROM DUAL UNION ALL
              SELECT '1246' FROM DUAL UNION ALL
              SELECT '1247' FROM DUAL UNION ALL
              SELECT '1248' FROM DUAL UNION ALL
              SELECT '1272' FROM DUAL UNION ALL
              SELECT '1280' FROM DUAL UNION ALL
              SELECT '1281' FROM DUAL UNION ALL
              SELECT '1282' FROM DUAL UNION ALL
              SELECT '1283' FROM DUAL UNION ALL
              SELECT '1284' FROM DUAL UNION ALL
              SELECT '1285' FROM DUAL UNION ALL
              SELECT '1286' FROM DUAL UNION ALL
              SELECT '1249' FROM DUAL UNION ALL
              SELECT '1250' FROM DUAL UNION ALL
              SELECT '1251' FROM DUAL UNION ALL
              SELECT '1252' FROM DUAL UNION ALL
              SELECT '1253' FROM DUAL UNION ALL
              SELECT '1255' FROM DUAL UNION ALL
              SELECT '1233' FROM DUAL UNION ALL
              SELECT '1234' FROM DUAL UNION ALL
              SELECT '1235' FROM DUAL UNION ALL
              SELECT '1236' FROM DUAL UNION ALL
              SELECT '1237' FROM DUAL UNION ALL
              SELECT '1238' FROM DUAL UNION ALL
              SELECT '1256' FROM DUAL UNION ALL
              SELECT '1257' FROM DUAL UNION ALL
              SELECT '1258' FROM DUAL UNION ALL
              SELECT '1254' FROM DUAL UNION ALL
              SELECT '1290' FROM DUAL UNION ALL
              SELECT '1310' FROM DUAL
SELECT l.id,
        nvl(short_desc,'This job failed') short_desc
FROM      my_table m
WHERE RIGTH JOIN
            list
          ON (
                  m.id = l.id
              AND
                  the_date > = SYSDATE - 23/24
              AND
                  the_date < TRUNC(SYSDATE) + 1
SY.

Need help with getting images to look smooth (without the bitmap squares) around the edges. When I transfer the image from pictures, it sets itself into the InDesign layout, but with square edges. I need to find out how to get it to look smooth?

Need to find out how to get my images transferred into an InDesign layout without the rough edges, as with a bit map image, but to appear with smooth edges in the layout. I can notice it more when I enlarge the file (pic). How can I get it to appear smooth in the finished layout. Another thing too that I noticed; it seems to have effected the other photos in the layout. They seem to be
pixelated too after I import the illustration (hand drawn artwork...)? Any assistance with this issue will be greatly appreciated. Thanks in advance.

No Clipboard, no copy & paste, as you would not get the full information of the image.
When you paste you can't get the image info from the Links panel, but you can get resolution and color info either via the Preflight panel or by exporting to PDF and checking the image in Acrobat.
Here I've pasted a 300ppi image, scaled it, and made a Preflight rule that catches any image under 1200ppi. The panel gives me the effective resolution of the pasted image as 556ppi. There are other workflow reasons not to paste—you loose the ability to easily edit the original and large file sizes—but pasting wouldn't cause a loss in effective resolution or change in color mode.

I need help with restoring a previous Firefox session from the other day, that seems to not be opening back up.

Similar Messages

Maybe you are looking for