I need help with solutions to Licensing error 150:30.

I transferred Elements with Time Machine from a Mac OS 10.6 machine to a newer Mac with 10.9.4. I've printed the 5 solutions, but can't get through them without help; I'm 73!

You can't do that, ever. Elements is not a tidy package like most mac apps and you can never move an installed copy. You must always install from scratch on a new machine.By trying to move it you've made extra work for yourself. You will need to download and run this:
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
after which you can go around and manually delete what you can find in the applications folder, hard drive>library>application support>adobe, and your username>library>preferences.
Then install from your original media.

Similar Messages

I need help with Mavericks Server: an error occurred while configuring your server. I

I need help with Mavricks Server, I get the following: an error occurred while configuring your server. I have deleted the Server.app several times along with the associated com.apple and Server folder. Any more help would be appreciated.

There are usually some log files around, related to the installation. See if Console.app (Applications > Utilities) shows anything relevant to the error, when you've done a fresh install of Server.app and tried the configuration.

Need help with Acrobat Xi installation error

Here is the error I am getting...
Exit Code: 7 Please see specific errors below for troubleshooting. For example, ERROR: -------------------------------------- Summary -------------------------------------- - 0 fatal error(s), 3 error(s) ----------- Payload: Acrobat Professional 11.0.0.0 {23D3F585-AE29-4670-8E3E-64A0EFB29240} ----------- ERROR: Error 1311.Source file not found: C:\Windows\Installer\Data1.cab. Verify that the file exists and that you can access it. ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation. MSI Error message: Error 1311.Source file not found: C:\Windows\Installer\Data1.cab. Verify that the file exists and that you can access it. ERROR: Third party payload installer AcroPro.msi failed with exit code: 1603 ------------------------------------------------------------------------------------- "Windows 7. Have tried installation several times. Need help now, considering I am paying for this service!

Thank you for the replies.
Jeff, I will check that link and try what is suggests.
Bill, to answer your questions...
1. This is a CC installation.
2. Yes, I am logged in as the admin and I have no anti-virus other than Microsoft Essentials enabled.
3. This is a download installation.
To give even more info that might help, I am using a Windows 7 machine with more than enough capability to run CC. I had installed Photoshop, Illustrator, among other apps successfully. I then tried the Acrobat XI installation. Acrobat XI downloaded and extracted, but when it started installing it froze around 50% and then I received the installation failed error from Windows. Once that was confirmed the CC install progress finishes but shows failure. The More Info reveals the error I pasted in above. Afterward, none of the CC apps worked properly and had to be uninstalled. So, next I installed the CC downloader and tried to start installing Acrobat XI first but the same error occurred. That's when I got frustrated and posted my original message. My limited knowledge leads me to think the error issue lies in the AcroPro.msi file but I have no idea what that is or how to find, correct, or install it.
Thanks again for any help you can provide. I'm really frustrated that I'm paying for something that I can't use.

Need help with Java always get error

hey guys need help
this the problem i get :
I go to certain websites and I get this error with firefox.
This Site requires that JavaScript be enabled.
It is enabled.
This is the one of the errors in java script console with firefox.
Error: [Exception... "'Component does not have requested interface' when calling method: [nsIInterfaceRequestor::getInterface]" nsresult: "0x80004002 (NS_NOINTERFACE)" location: "<unknown>" data: no]
I have installed the java script from there home site and did a test and says everything is fine. Any ideas?
please help

Hi 49ers,
Sorry not to have any real idea of how to help you out here, but this is a Java forum, not JavaScript.
Some Firefox expert may stumble across your post and be able to offer some advice (I hope they do) but this isn't really the best place to post such questions.
Try here: http://www.webdeveloper.com/forum/forumdisplay.php?s=&forumid=3
Good luck!
Chris.

Need help with recomendations on licenses for Server 2012 Std R2

I have a client who wants to purchase a server from me. I can buy the parts and assemble the system no problem. But I'm a newbie when it comes to user CALs or device CALs. The company will be having about 50 computers connecting to it. I'm assuming they'll
just be using the standard user/password domain login.
What else would I need to purchase in addition to the OS?
What kind of features does the vanilla server OS give you? Can 50 computers connect to just the OS alone? I've seen places that have a 1 user CAL for $36. Do I need 50 of these? If I don't purchase them right away, could my client still connect their computers
to the server?
mr.t

Hello,
Licensing Windows Server 2012 comes in four different flavours foundation, essentials, standard and datacenter.
Your client is wanting connect 50 users which really does rule out two of those flavours.
Essentials is ruled out because it is an OEM operating system and only supports up to 15 users and has limited functionality
Foundation is rules out because it only supports up to 25 users and has limited functionality
This leaves us with two Windows Server 2012 flavours you can purchase Standard or Datacenter. They both have exactly the same functionality; the difference is the virtualisation
rights. With standard one license covers two physical processors and supports two virtual machines, if you need more virtual machines then you would have to buy another standard license and giving the right to four virtual machines for example. Then
for datacenter license covers two physical processors and covers you for an unlimited amount of virtual operating systems.
To make this hopefully easier:
1 x standard license covers = 2 x physical processors – 2 x virtual operating systems environments
1x datacenter license covers = 2 x physical processors – unlimited virtual operating environments
Both Standard and Datacenter come with Full functionality
Meaning standard licensing is really for no or very limited virtual environments, then if you are looking in to a virtual environment Datacenter is the way to go.
On regards to CALS are required for every user or device accessing the server. They/you will need to decide whether or not you go for Device or user CALs. User CAL
is more expensive but it gives companies a lot more flexible if the users are running more than one device for example if they support a bring your own device strategy. Although there are different types of CALS depending on what the customer will be
looking to use and access.
Also can your user still connect to the server: technically speaking yes, CALS are not like license keys you cannot activate them it is effectively a piece of
paper to say you have purchased X amount CALS and your compliant to allow your users to connect. So you can connect with out purchasing but you will not be compliant from a licensing standpoint.
Hope this helps to some degree!
Cheers,
Harry

Need help with Photoshop and "Licensing for this product has stopped working" message. Adobe fix isn't working.

I am still using CS3. A while back I received an error: "Licensing for this product has stopped working" for my CS3 programs. I used the recovery program suggested by Adobe and was able to get Illustrator, Flash and Dreamweaver to work, but I still can't open Photoshop or In Design. I went back to the Adobe site and did every other trick they suggested to fix the error, but nothing has worked.
I then tried to uninstall photoshop from my CS3 suite (so I could reinstall) but got a JavaScript Alert: "Critical errors were found in set up. Please see set up log for file details." Seeing as I am not the best with the behind the scenes technical stuff, I have no idea what this means or where the set up log even is. Any help anyone can provide?
I have had CS3 installed on my computer for over a year. I started having problems about 4 months ago.

I am having similar problem. Can't open any of CS3 programs after trying to download Dreamweaver Trial, which wouldn't work because "couldn't remove DLM extention" error message. So now I can not run Illustrator, Photoshop, or even Adobe Reader. These are properly licensed for about a year. I get "License for product has stopped working". Have 2 pending cases open with Adobe support (one for Dreamweaver trial, one for license problem) since 8/3 with NO ANSWERS - It says answers within 1-3 business days. Was on phone support hold today for over 3 hours before line went dead with no help. What is up with adobe support? Can anyone help?

Need help with coding: getting an error

Hi there everyone, this would be my first post here, and my first post on any forum related to programming. Im taking a highschool computer science course, in which we are learning J2SE. I have read ahead a bit, and am having trouble with the following program:
//=============================================================================
//Converts US Dollars To Euros
//=============================================================================
public class currencyconverter1
     private Double dollarRate = 1.00000;
     private Double conversionRate = 1.22990;
     private Double dollarAmount = 0.0;
     private Double euroAmount = 0.0;
          public static void main convert Double(euroAmount)
               dollarAmount = euroAmount*conversionRate;
               System.out.println(dollarAmount);
               return euroAmount
               }JCreator is telling me I need a '(' on the "main" line. I simply cannot find where this is needed. Can anyone help, or recommend another forum where I may find some help? Thanks in advance!

Thanks for the reply... I tested out your code, and it didn't compile, so after playing with it, heres what I got to compile (please read past the code):
public class currencyconverter1
     private Double dollarRate = 1.00000;
     private Double conversionRate = 1.22990;
     private Double dollarAmount = 0.0;
     private Double euroAmount = 0.0;
     public Double convert (Double euroAmount)
          dollarAmount = euroAmount * conversionRate;
          System.out.println(dollarAmount);
          return euroAmount;
}It gives me the following message when I execute the .exe: "Exception in thread "main" Java.Lang.NoSuchMethodError: Main" ....
Does anyone know what the deal is and can explain wnat my source code error is? Thanks again in advance.

Need Help with "Not Enough Memory Error" when running executable (is my VI reworkable?)

When I started making this VI, I had no clue about proper VI flow, sub-VI usuage, and much more I'm sure.
The VI is a program that outputs a 0-5V digiatl signal to a relay board (to actuate an air cylinder) and monitors 4 input voltages (lets say from a pressure transducer) . The program would then shut down the corresponding output channel if a pressure threshold is not met.
Surprissingly for my first LV program, The VI functions "fine" (the quotes are because I know my programming flow is a mess and probably not efficient) unitl I reach a given cycle count or time elasped, at which time my VI blows up and I receive an error for "not enough memory to complete operatoin".
I am wondering if there is a simple DAQmx (or something else) command misplaced or missing that would solve this issue. When I started making this VI I had a poor top down design layout, or lack of one. I would like to believe I have learned a lot from making this program with no LV training and if I were to do it again I would utilize state machines and sub VI's more. However, with time not on my side and LV not a priority in my job I would like to know if this VI is reworkable..?
I should also mention that this program is being run as an executable on a laptop without the full LV development software. I dont know if the executable creation process could have left to this problem either...
Attached is LV version 10 and 11
Thanks for the help
Attachments:
LCT_DAQmx v11.0.vi ‏173 KB
LCT_DAQmx.vi ‏135 KB

There are some things you can probabaly do fairly easily. Four of the inner while loops appear to be very similar. You could probably make a subVI from one of them and reuse the code. Some of the shift registers are initialized and some are not. I suspect that this is an error, although I did not look closely enough to determine which way is intended. Read up on reentrancy. You may need that for the subVI.
The outer loop, if it is needed at all should be stopped by a front panel boolean, not by the Abort button. Someone on the Forums has suggested that using the Abort button to stop a VI is like using a tree to stop a car - it works but may have undesirable consequences!
Re-initializing the DAQ tasks and clearing them on each iteration is not very effficient, is slow, and may lead to problems.
The inner inner while loops (inside On Cycle and Off Cycle) are very similar, differing mostly in the data written. Perhaps you only need Idle and Run (with Data as a parameter). The inner inner loops might be combined with the outer loops with some change in the way the timing is handled.
You Dequeue in two places in each loop. There is no data dependency bewteen the two Dequeue functions, meaning that you cannot be sure which will execute first. Also, none of the Dequeues has a timeout set. They will wait forever if no data is available. Queues should not usually be read in more than one location to avoid loss of data or confusion about which data came first.
Lynn

Need help with Muse PHP (JavaScript error...email)

Hey all....
I searched and did not see an answer for this:
I am exporting my Muse file to HTML and keep getting this error for my Contact Us page (email issue):
"JavaScript Error:Form PHP Script is missing from web server, or PHP is not configured correctly or your web host provider. Check if the form PHP script as been uploaded correctly, then contact your hosting provider about PHP configuration."
What PHP version does MUSE support....5.1? I contacted HostGator and they just updated my PHP to 5.5 and asked me what PHP MUSE needs. HostGator says 5.1 is old and they do not support 5.1. Can anyone help me?
Also, when I try to check PHP with: http://my-site.com/scripts/form_check.php I just get an "oops" screen, but does not verify my PHP.????
Thanks

Difficult to debug without the URL for the form page on your site...
Are you using the built-in File > Upload to FTP Host in Muse? Or did you use File > Export as HTML and uploaded with some other tool?
Does http://<insert your domain name here>/scripts/museutils.js load anything? Or does it also give an "oops" screen? If it gives an "oops" screen, that would imply not all the exported files were uploaded to your server, they weren't uploaded to the correct location, or the permissions aren't set correctly.
For forms Muse only requires PHP 4.1 or later. PHP version is not the issue.

Need help with BES 10 activation error: "Device activation can't be completed because the setup process or a training tutorial is running"

Hi All,
I am having a hard time finding any info on this activation error, and I really can't get to the bottom of it. When I enter my companie's activation code for the BES 10 network, it gives me the following message:
" Device activation can't be completed because the setup process or a training tutorial is running on your device. Try again later."
It would be nice if the msg could be a little more specific! But anyway, I have tried all the traditional fixes, battery pulls, re&re to BES, etc. but still nothing. My last option is to wipe and see if that works but curious to see if anyone has run into this before.
PS I have a Z10 STL100-3
Thanks in advance!
cheers

Good. excellent solved service blackberry
Thanks. aspataro
Please thank those who help you by clicking the button.
If your issue has been solved, please resolve it by marking "Accept as Solution"

Need help with Photoshop and Runtime Error

Runtime Error Photoshop & MS Visual C++ WIN7 32bit Photoshop will appear to launch then dies with a ('MS Visual C++ Runtime Error!' = Application requested the runtime to terminate it an unusual manner. Contact application's support team for more information).
Anyone have clue as to how this can be fixed and not lose all currently loaded brushes, styles, actions, etc?

You need to provide much more info, like exact system specs and crash details:
Working with your Operating System’s Tools
Also hold down Ctrl+Alt+Shift during program startup to reset the prefs to defaults. If the error is caused by damaged presets, actions or whatever, then you will lose some of that, otehrwise they will be untouched.
Mylenium

Need Help with my School Assignment - Error Message

Hey guys,
I'm doing a school assignment for my Object Oriented Java programing class. Here's the assignment requirements:
"There are five kinds of flowers, and their associated costs. Create an array of strings that holds the names of these flowers. Create another array that holds the cost of each corresponding flower. Your program should read the name of a flower and the quantity desired by a customer. Locate the flower in the name array and use that index to find the cost per stem in the cost array. Compute and print the total cost of the sale. Write your solution in one class: FlowerCounterArray.
The solution should implement the following two methods:
- addOrder(String flowerName, int quantity) to add to the order. This is in addition to reading from the terminal.
- printTotal() to print out the total cost to the terminal."
I wrote up some code so far and I want to test it, but I am getting this error: "']' expected" on the newFlower[0] = new FlowerCounterArrays("petunia", 0.50]; line near the end of the code.
Here's my code:
public class FlowerCounterArrays {
    private String flowerName;
    private double price;
    public void addOrder(String flowerName, int quantity) {
        for (FlowerCounterArrays flower : newFlower) {
            if (flower.equals(flowerName)) {
                total = price * quantity;
                System.out.println("The price for " + quantity + " " + flower + "(s) is " + total);
            else {
                System.out.println("Unfortunately we do not carry that type of flower here.");
    public void printTotal() {
        System.out.println(total);
    FlowerCounterArrays[] newFlower = new FlowerCounterArrays[5];
    newFlower[0] = new FlowerCounterArrays("petunia", 0.50];
    newFlower[1] = new FlowerCounterArrays("pansy", 0.75);
    newFlower[2] = new FlowerCounterArrays("rose", 1.50);
    newFlower[3] = new FlowerCounterArrays("violet", 0.50);
    newFlower[4] = new FlowerCounterArrays("carnation", 0.80);
}Thanks for the help guys! Much appreciated!
Edited by: he4dhuntr on Oct 14, 2008 1:33 PM

Ok. I'm kind of new to all this, so some stuff I'm not 100% clear on.
I get what you're saying though. I put the array into the method.
Although now I get a new errod: "cannot find symbol - constructor FlowerCounterArrays(java.lang.String,double)"
I get this error on my newFlower[0] = new FlowerCounterArrays("petunia", 0.50); line
Here's my new code:
public class FlowerCounterArrays {
    private String flowerName;
    private double price;
    public void addOrder(String flowerName, int quantity) {
        FlowerCounterArrays[] newFlower = new FlowerCounterArrays[5];
        newFlower[0] = new FlowerCounterArrays("petunia", 0.50);
        newFlower[1] = new FlowerCounterArrays("pansy", 0.75);
        newFlower[2] = new FlowerCounterArrays("rose", 1.50);
        newFlower[3] = new FlowerCounterArrays("violet", 0.50);
        newFlower[4] = new FlowerCounterArrays("carnation", 0.80);
        for (FlowerCounterArrays flower : newFlower) {
            if (flower.equals(flowerName)) {
                total = price * quantity;
                System.out.println("The price for " + quantity + " " + flower + "(s) is " + total);
            else {
                System.out.println("Unfortunately we do not carry that type of flower here.");
    public void printTotal() {
        System.out.println(total);
}Thanks for the help so far!

Dreamweaver 4 Dinosaur needs Help with Clean Up HTML Error

I'm a dinosaur still using DW 4.01 for our company website. Recently, due to a PC crash, I had to reinstall it on a new DELL Workstation running under XP Pro SP3.
Tried to run the Clean Up HTML command and got this error every time on any page I tried to use it on:
"While executing onClick in Clean Up HTML, a JavaScript error occurred." Then you have to select Cancel, or DW will abruptly close/crash.
There are a few references to external javascript files - do I need to comment these out to get CleanUp HTML to work???
Has anyone ever seen this problem before? I find ZERO references to it online.
Can't afford the $200 to upgrade to a newer version this month, nor do I have the time to learn a new piece of software. Just trying to ride the Edsel to the dinosaur graveyard til the economy gets better.
If you have a suggestion on how to FIX or workaround this bug, it would be great. Any help is greatly appreciated.

See if this helps:
http://kb2.adobe.com/cps/191/tn_19105.html

Need help with destinations.msi error

When I try to access the internet via "Firefox", I receive, the message: "Please wait while windows configures Destinations" "The feature you ae trying to use is on a cd-rom, error 1706." My PC proceeds to hang there until I cancel out the message. I'm wondering if an overzealous registry cleaner is to blame for "cleaning" something necessary out of an msi folder. What is causing this and how do I fix it?
I have a Compaq Presario SR1820NX and a HP deskjet 5440 printer running XP.

Same problem with my desktop with windows XP . When computer starts up, get windows installer popping up with same message Tried inserting Hp printer software disc, doesn't help. Then when I go to browser (firefox) get same thing again, and have to cancel, cancel cancel to get out of of it. Only way I found was to uninstall HP photosmart essential software, and leave it off. Re-installed from site as well, with no luck either. Seems to be a very widespread problem from what I can see from searching for a cure, but still haven't seen a cure that works for me. Make's it a little hard to use printer features when you can't install software for it.

Need help with Connect to iTunes error.

My iPhone 3GS is stuck with the "Connect to iTunes" image. It will not go away.
It happened when I tried to get the IOS 6.0 update. I had the same issue with my iPad when I tried getting the update but at least my iTunes recognized my iPad after 2 or 3 days. I cannot wait that long to get my phone working again.
Right now, iTunes will not recognize my phone at all.
I have tried most of the troubleshooting tips i.e. I'm running the latest version of iTunes, I have restarted my laptop, I have done a few gard resets on my iPhone, power down, power up..etc..etc.
I'm using a PC with windows 7.
Any help/suggestions will be much appreciated.
Thanks is advance.

See:
iOS: Unable to Update or Restore
http://support.apple.com/kb/ht1808

I need help with solutions to Licensing error 150:30.

Similar Messages

Maybe you are looking for