I need Help with Some CSS
I am in the process of making a new template for my site.
I can't really provide any code and here's why, I need help finding the code that I need to change. The new template is actually being designed here.
If you scroll over the home link you will find a sub-menu pops up, if you scroll over the menu items they get bigger and come 'at" you, if you hover over sub-2 and then hover over sub-3 you will notice there is a wild transition effect, I need to know how to get rid of those, it is a different CSS code from another template link to my site. I can't find out how, if somebody could please help me out it would be wonderful. Thank you a whole bunch in advance.
Your menu moves for a couple of reasons first, you have a border in the hover, which is going to move all of the text. You can get rid of the border in the hover or add a border of the same size/style in the active.
The second reason it appears you have some paddng in the hover that moves the text.
Find those and you can solve the issue.
Gary
Similar Messages
-
Ack! need help with a CSS layout
I've been struggling to layout a Dreamweaver template that
does the following:
You can see the files here:
http://northfloridahealthcorps.org/Oct5/index.html
First, I know there's way to much CSS going on here. I'm
newer to CSS and there's a lot of code detritus that's probably
compounding my problems. My apologies. I don't know if you need to
anywise my code, I just want CSS that will solve the problem. Any
suggestions that will help me set up a page that will do the
following will be greatly appreciated.
The layout:
A centered 2 and 3 column layout with fixed width columns a
footer and a header.
I want to page to fill the browser in IE6 and 7, etc.
regardless of the quantity of content.
The footer needs to stay at the bottom; more content pushes
the footer below the viewport but the footer's at the bottom even
if the page has no text.
There's a background image in the wrapper/container that
helps delineate the columns. This needs to stretch vertically too.
I've read a lot on Divs that stretch but sill can't see to
figure out what I'm doing wrong. I have struggled and struggled
this and I'm going nuts! Some CSS settings work for IE7 allowing
the page to stretch but it doesn't work in IE6 or vice versa (and I
can't get the footer to work!). What am I doing wrong?
Thank's Thank's Thank's Thank's Thank's!
Greggo here for a tutorial on keeping footers at the bottom of
the page
Text -
[8i] Need help with some workday calculations
At the beginning of the month, I got help with a workday calculation in: [8i] Help with function with parameters (for workday calculation)
Now, as it turns out, I was able to locate a function in the database that does what I want, however, it is much slower to use the function than to join two copies of the CALN table (Please see referenced thread for details. I can copy them to this thread if necessary.) I need to verify that the pre-existing function has 'DETERMINISTIC' in it, as I would guess that if it doesn't, it would be much slower than it could be.
But now, I've come across a situation where I have to do multiple workday calculations in the same query--enough that I have to join 6 copies of my CALN table. I can't imagine that is at all efficient. I believe it was Frank K. who said (in the original thread) that if the function was slow, I should consider alternatives. Can anyone help me identify some of those alternatives? I'm definitely at that point now. (This query is one I'm using as the base for a report in Oracle BI, and let's just say it doesn't like my query, even though my syntax appears to be correct, and I would guess that joining 6 copies of one table is at least partly to blame for this).
Note: I'm working with Oracle 8iOK, I finally have some sample data... I tried to make it thorough. I've included data in the CALN table YTD + tomorrow, so that any workday calculations using SYSDATE will work.
CREATE TABLE caln
( clndr_dt DATE NOT NULL
, clndr_yr NUMBER
, shop_day NUMBER
, shop_dt DATE
, shop_wk NUMBER
, shop_yr NUMBER
, shop_days NUMBER
, clndr_days NUMBER
CONSTRAINT caln_pk PRIMARY KEY (clndr_dt)
INSERT INTO caln
VALUES (To_Date('12/23/2009','mm/dd/yyyy'),2009,247,To_Date('12/23/2009','mm/dd/yyyy'),51,2009,7631,10950);
INSERT INTO caln
VALUES (To_Date('01/01/2010','mm/dd/yyyy'),2010,0,To_Date('12/23/2009','mm/dd/yyyy'),52,2009,7631,10959);
INSERT INTO caln
VALUES (To_Date('01/02/2010','mm/dd/yyyy'),2010,0,To_Date('12/23/2009','mm/dd/yyyy'),52,2009,7631,10960);
INSERT INTO caln
VALUES (To_Date('01/03/2010','mm/dd/yyyy'),2010,0,To_Date('12/23/2009','mm/dd/yyyy'),1,2010,7631,10961);
INSERT INTO caln
VALUES (To_Date('01/04/2010','mm/dd/yyyy'),2010,1,To_Date('01/04/2010','mm/dd/yyyy'),1,2010,7632,10962);
INSERT INTO caln
VALUES (To_Date('01/05/2010','mm/dd/yyyy'),2010,2,To_Date('01/05/2010','mm/dd/yyyy'),1,2010,7633,10963);
INSERT INTO caln
VALUES (To_Date('01/06/2010','mm/dd/yyyy'),2010,3,To_Date('01/06/2010','mm/dd/yyyy'),1,2010,7634,10964);
INSERT INTO caln
VALUES (To_Date('01/07/2010','mm/dd/yyyy'),2010,4,To_Date('01/07/2010','mm/dd/yyyy'),1,2010,7635,10965);
INSERT INTO caln
VALUES (To_Date('01/08/2010','mm/dd/yyyy'),2010,5,To_Date('01/08/2010','mm/dd/yyyy'),1,2010,7636,10966);
INSERT INTO caln
VALUES (To_Date('01/09/2010','mm/dd/yyyy'),2010,0,To_Date('01/08/2010','mm/dd/yyyy'),1,2010,7636,10967);
INSERT INTO caln
VALUES (To_Date('01/10/2010','mm/dd/yyyy'),2010,0,To_Date('01/08/2010','mm/dd/yyyy'),2,2010,7636,10968);
INSERT INTO caln
VALUES (To_Date('01/11/2010','mm/dd/yyyy'),2010,6,To_Date('01/11/2010','mm/dd/yyyy'),2,2010,7637,10969);
INSERT INTO caln
VALUES (To_Date('01/12/2010','mm/dd/yyyy'),2010,7,To_Date('01/12/2010','mm/dd/yyyy'),2,2010,7638,10970);
INSERT INTO caln
VALUES (To_Date('01/13/2010','mm/dd/yyyy'),2010,8,To_Date('01/13/2010','mm/dd/yyyy'),2,2010,7639,10971);
INSERT INTO caln
VALUES (To_Date('01/14/2010','mm/dd/yyyy'),2010,9,To_Date('01/14/2010','mm/dd/yyyy'),2,2010,7640,10972);
INSERT INTO caln
VALUES (To_Date('01/15/2010','mm/dd/yyyy'),2010,10,To_Date('01/15/2010','mm/dd/yyyy'),2,2010,7641,10973);
INSERT INTO caln
VALUES (To_Date('01/16/2010','mm/dd/yyyy'),2010,0,To_Date('01/15/2010','mm/dd/yyyy'),2,2010,7641,10974);
INSERT INTO caln
VALUES (To_Date('01/17/2010','mm/dd/yyyy'),2010,0,To_Date('01/15/2010','mm/dd/yyyy'),3,2010,7641,10975);
INSERT INTO caln
VALUES (To_Date('01/18/2010','mm/dd/yyyy'),2010,11,To_Date('01/18/2010','mm/dd/yyyy'),3,2010,7642,10976);
INSERT INTO caln
VALUES (To_Date('01/19/2010','mm/dd/yyyy'),2010,12,To_Date('01/19/2010','mm/dd/yyyy'),3,2010,7643,10977);
INSERT INTO caln
VALUES (To_Date('01/20/2010','mm/dd/yyyy'),2010,13,To_Date('01/20/2010','mm/dd/yyyy'),3,2010,7644,10978);
INSERT INTO caln
VALUES (To_Date('01/21/2010','mm/dd/yyyy'),2010,14,To_Date('01/21/2010','mm/dd/yyyy'),3,2010,7645,10979);
INSERT INTO caln
VALUES (To_Date('01/22/2010','mm/dd/yyyy'),2010,15,To_Date('01/22/2010','mm/dd/yyyy'),3,2010,7646,10980);
INSERT INTO caln
VALUES (To_Date('01/23/2010','mm/dd/yyyy'),2010,0,To_Date('01/22/2010','mm/dd/yyyy'),3,2010,7646,10981);
INSERT INTO caln
VALUES (To_Date('01/24/2010','mm/dd/yyyy'),2010,0,To_Date('01/22/2010','mm/dd/yyyy'),4,2010,7646,10982);
INSERT INTO caln
VALUES (To_Date('01/25/2010','mm/dd/yyyy'),2010,16,To_Date('01/25/2010','mm/dd/yyyy'),4,2010,7647,10983);
INSERT INTO caln
VALUES (To_Date('01/26/2010','mm/dd/yyyy'),2010,17,To_Date('01/26/2010','mm/dd/yyyy'),4,2010,7648,10984);
INSERT INTO caln
VALUES (To_Date('01/27/2010','mm/dd/yyyy'),2010,18,To_Date('01/27/2010','mm/dd/yyyy'),4,2010,7649,10985);
INSERT INTO caln
VALUES (To_Date('01/28/2010','mm/dd/yyyy'),2010,19,To_Date('01/28/2010','mm/dd/yyyy'),4,2010,7650,10986);
INSERT INTO caln
VALUES (To_Date('01/29/2010','mm/dd/yyyy'),2010,20,To_Date('01/29/2010','mm/dd/yyyy'),4,2010,7651,10987);
INSERT INTO caln
VALUES (To_Date('01/30/2010','mm/dd/yyyy'),2010,0,To_Date('01/29/2010','mm/dd/yyyy'),4,2010,7651,10988);
INSERT INTO caln
VALUES (To_Date('01/31/2010','mm/dd/yyyy'),2010,0,To_Date('01/29/2010','mm/dd/yyyy'),5,2010,7651,10989);
INSERT INTO caln
VALUES (To_Date('02/01/2010','mm/dd/yyyy'),2010,21,To_Date('02/01/2010','mm/dd/yyyy'),5,2010,7652,10990);
INSERT INTO caln
VALUES (To_Date('02/02/2010','mm/dd/yyyy'),2010,22,To_Date('02/02/2010','mm/dd/yyyy'),5,2010,7653,10991);
INSERT INTO caln
VALUES (To_Date('02/03/2010','mm/dd/yyyy'),2010,23,To_Date('02/03/2010','mm/dd/yyyy'),5,2010,7654,10992);
INSERT INTO caln
VALUES (To_Date('02/04/2010','mm/dd/yyyy'),2010,24,To_Date('02/04/2010','mm/dd/yyyy'),5,2010,7655,10993);
INSERT INTO caln
VALUES (To_Date('02/05/2010','mm/dd/yyyy'),2010,25,To_Date('02/05/2010','mm/dd/yyyy'),5,2010,7656,10994);
INSERT INTO caln
VALUES (To_Date('02/06/2010','mm/dd/yyyy'),2010,0,To_Date('02/05/2010','mm/dd/yyyy'),5,2010,7656,10995);
INSERT INTO caln
VALUES (To_Date('02/07/2010','mm/dd/yyyy'),2010,0,To_Date('02/05/2010','mm/dd/yyyy'),6,2010,7656,10996);
INSERT INTO caln
VALUES (To_Date('02/08/2010','mm/dd/yyyy'),2010,26,To_Date('02/08/2010','mm/dd/yyyy'),6,2010,7657,10997);
INSERT INTO caln
VALUES (To_Date('02/09/2010','mm/dd/yyyy'),2010,27,To_Date('02/09/2010','mm/dd/yyyy'),6,2010,7658,10998);
INSERT INTO caln
VALUES (To_Date('02/10/2010','mm/dd/yyyy'),2010,28,To_Date('02/10/2010','mm/dd/yyyy'),6,2010,7659,10999);
INSERT INTO caln
VALUES (To_Date('02/11/2010','mm/dd/yyyy'),2010,29,To_Date('02/11/2010','mm/dd/yyyy'),6,2010,7660,11000);
INSERT INTO caln
VALUES (To_Date('02/12/2010','mm/dd/yyyy'),2010,30,To_Date('02/12/2010','mm/dd/yyyy'),6,2010,7661,11001);
INSERT INTO caln
VALUES (To_Date('02/13/2010','mm/dd/yyyy'),2010,0,To_Date('02/12/2010','mm/dd/yyyy'),6,2010,7661,11002);
INSERT INTO caln
VALUES (To_Date('02/14/2010','mm/dd/yyyy'),2010,0,To_Date('02/12/2010','mm/dd/yyyy'),7,2010,7661,11003);
INSERT INTO caln
VALUES (To_Date('02/15/2010','mm/dd/yyyy'),2010,31,To_Date('02/15/2010','mm/dd/yyyy'),7,2010,7662,11004);
INSERT INTO caln
VALUES (To_Date('02/16/2010','mm/dd/yyyy'),2010,32,To_Date('02/16/2010','mm/dd/yyyy'),7,2010,7663,11005);
INSERT INTO caln
VALUES (To_Date('02/17/2010','mm/dd/yyyy'),2010,33,To_Date('02/17/2010','mm/dd/yyyy'),7,2010,7664,11006);
INSERT INTO caln
VALUES (To_Date('02/18/2010','mm/dd/yyyy'),2010,34,To_Date('02/18/2010','mm/dd/yyyy'),7,2010,7665,11007);
INSERT INTO caln
VALUES (To_Date('02/19/2010','mm/dd/yyyy'),2010,35,To_Date('02/19/2010','mm/dd/yyyy'),7,2010,7666,11008);
INSERT INTO caln
VALUES (To_Date('02/20/2010','mm/dd/yyyy'),2010,0,To_Date('02/19/2010','mm/dd/yyyy'),7,2010,7666,11009);
CREATE TABLE ords
( ord_nbr NUMBER NOT NULL
, sub_nbr NUMBER NOT NULL
, ord_stat VARCHAR2(2)
, ord_qty NUMBER
, part_nbr VARCHAR2(5)
CONSTRAINT ords_pk PRIMARY KEY (ord_nbr, sub_nbr)
INSERT INTO ords
VALUES (1,1,'CL',10,'PART1');
INSERT INTO ords
VALUES (1,2,'CL',5,'PART1');
INSERT INTO ords
VALUES (25,1,'CL',15,'PART2');
INSERT INTO ords
VALUES (14,1,'OP',12,'PART3');
INSERT INTO ords
VALUES (33,1,'CL',25,'PART1');
INSERT INTO ords
VALUES (33,2,'CL',15,'PART1');
INSERT INTO ords
VALUES (33,3,'OP',10,'PART1');
INSERT INTO ords
VALUES (7,1,'PL',18,'PART2');
INSERT INTO ords
VALUES (96,1,'PL',10,'PART3');
INSERT INTO ords
VALUES (31,1,'CL',20,'PART2');
CREATE TABLE oops
( ord_nbr NUMBER NOT NULL
, sub_nbr NUMBER NOT NULL
, op_nbr VARCHAR2(4) NOT NULL
, mach_id VARCHAR2(4)
, oper_stat VARCHAR2(2)
, plan_start_dt DATE
, plsu NUMBER
, plrn NUMBER
CONSTRAINT ords_pk PRIMARY KEY (ord_nbr, sub_nbr, op_nbr)
-- NOTE:
-- for the orders with a status of 'CL' or 'PL' in the 'ords' table, I'm not bothering to put
-- in more than two operations (though in reality more would be there) since they should be
-- ignored in the final result anyway
INSERT INTO oops
VALUES (1,1,'0010','123A','CL',TO_DATE('01/11/2010','mm/dd/yyyy'),2,0.2);
INSERT INTO oops
VALUES (1,1,'0015','259B','CP',TO_DATE('01/12/2010','mm/dd/yyyy'),1,0.15);
INSERT INTO oops
VALUES (1,2,'0010','123A','CP',TO_DATE('01/11/2010','mm/dd/yyyy'),2,0.2);
INSERT INTO oops
VALUES (1,2,'0015','259B','CP',TO_DATE('01/12/2010','mm/dd/yyyy'),1,0.15);
INSERT INTO oops
VALUES (25,1,'0005','123A','CP',TO_DATE('01/18/2010','mm/dd/yyyy'),2,0.25);
INSERT INTO oops
VALUES (25,1,'0030','110C','CL',TO_DATE('01/19/2010','mm/dd/yyyy'),4,0.1);
INSERT INTO oops
VALUES (14,1,'0010','127A','CP',TO_DATE('01/11/2010','mm/dd/yyyy'),2,0.25);
INSERT INTO oops
VALUES (14,1,'0025','110C','CL',TO_DATE('01/12/2010','mm/dd/yyyy'),1,0.1);
INSERT INTO oops
VALUES (14,1,'0040','050C','CP',TO_DATE('01/13/2010','mm/dd/yyyy'),1.3,0.15);
INSERT INTO oops
VALUES (14,1,'0050','220B','WK',TO_DATE('01/14/2010','mm/dd/yyyy'),4,0.25);
INSERT INTO oops
VALUES (14,1,'0065','242B','AV',TO_DATE('01/18/2010','mm/dd/yyyy'),1.5,0.1);
INSERT INTO oops
VALUES (14,1,'0067','150G','NA',TO_DATE('01/19/2010','mm/dd/yyyy'),2,0.1);
INSERT INTO oops
VALUES (14,1,'0100','250G','NA',TO_DATE('01/20/2010','mm/dd/yyyy'),2.1,0.2);
INSERT INTO oops
VALUES (33,1,'0010','123A','CL',TO_DATE('01/11/2010','mm/dd/yyyy'),1.9,0.2);
INSERT INTO oops
VALUES (33,1,'0015','259B','CP',TO_DATE('01/12/2010','mm/dd/yyyy'),1,0.1);
INSERT INTO oops
VALUES (33,2,'0010','123A','CL',TO_DATE('01/11/2010','mm/dd/yyyy'),1.9,0.2);
INSERT INTO oops
VALUES (33,2,'0015','259B','CP',TO_DATE('01/12/2010','mm/dd/yyyy'),1,0.1);
INSERT INTO oops
VALUES (33,3,'0010','123A','CL',TO_DATE('01/11/2010','mm/dd/yyyy'),1.9,0.2);
INSERT INTO oops
VALUES (33,3,'0015','259B','CP',TO_DATE('01/12/2010','mm/dd/yyyy'),1,0.1);
INSERT INTO oops
VALUES (33,3,'0020','220B','NA',TO_DATE('01/12/2010','mm/dd/yyyy'),1.7,0.15);
INSERT INTO oops
VALUES (33,3,'0030','150G','NA',TO_DATE('01/13/2010','mm/dd/yyyy'),1.3,0.05);
INSERT INTO oops
VALUES (33,3,'0055','150G','NA',TO_DATE('01/15/2010','mm/dd/yyyy'),2.1.,0.1);
INSERT INTO oops
VALUES (7,1,'0005','123A','NA',TO_DATE('01/11/2010','mm/dd/yyyy'),2,0.2);
INSERT INTO oops
VALUES (7,1,'0030','110C','NA',TO_DATE('01/12/2010','mm/dd/yyyy'),1,0.15);
INSERT INTO oops
VALUES (96,1,'0010','127A','NA',TO_DATE('01/11/2010','mm/dd/yyyy'),2,0.25);
INSERT INTO oops
VALUES (96,1,'0025','110C','NA',TO_DATE('01/12/2010','mm/dd/yyyy'),1,0.1);
INSERT INTO oops
VALUES (31,1,'0005','123A','CL',TO_DATE('01/11/2010','mm/dd/yyyy'),1.9,0.2);
INSERT INTO oops
VALUES (31,1,'0030','110C','CP',TO_DATE('01/12/2010','mm/dd/yyyy'),1,0.1);
CREATE TABLE mach
( mach_id VARCHAR2(4) NOT NULL
, desc_short VARCHAR2(9)
, group VARCHAR2(7)
CONSTRAINT ords_pk PRIMARY KEY (mach_id)
INSERT INTO mach
VALUES ('123A','desc here','GROUPH1');
INSERT INTO mach
VALUES ('259B','desc here','GROUPH2');
INSERT INTO mach
VALUES ('110C','desc here','GROUPJ1');
INSERT INTO mach
VALUES ('050C','desc here','GROUPK2');
INSERT INTO mach
VALUES ('220B','desc here','GROUPH2');
INSERT INTO mach
VALUES ('242B','desc here','GROUPH2');
INSERT INTO mach
VALUES ('150G','desc here','GROUPL1');
INSERT INTO mach
VALUES ('250G','desc here','GROUPL2');
INSERT INTO mach
VALUES ('242B','desc here','GROUPH2'); -
Need help with some JS installing Bumpbox 2.0
I am trying to add a lightbox effect to a pdf on my website, I found a Javascript plugin at http://www.artviper.net/bumpbox-demo/index.html that looks like it should do the trick, but I am having trouble getting it to work.
To narrow down the problem I created a test.html file that I stuck in the root directory of the folder I downloaded from their site (so I am working locally off my desktop at this point)
My code is as follows... I feel like I am missing something super obvious, does anyone see it? (do I need to define the .bump class in the css file?)
Thank you in advance for the much needed help!
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<title>Untitled Document</title>
</head>
<body>
<a href="http://www.artviper.net/test.pdf" class="bump" rel="800-350">PDF File »</a><br />
<script type="text/javascript" src="js/mootools.js"></script>
<script type="text/javascript" src="js/bumpbox-2.0.1.js"></script>
<script type="text/javascript"> doBump( '.bump',750, 500, '111', '900', '0.8', 5, 1 ,'333', 15,'000', 4,
Fx.Transitions.Bounce.EaseOut,
Fx.Transitions.Bounce.EaseOut,
'images/demo_bg_bumpbox.png',
'top left',
'repeat-x' ); </script>
</body>
</html>These paths won't work because they point to files on your local hard drive.
<script type="text/javascript" src="file:///Macintosh HD/Users/Robert/Downloads/bumpbox Folder copy/js/mootools.js"></script>
<script type="text/javascript" src="file:///Macintosh HD/Users/Robert/Downloads/bumpbox Folder copy/js/bumpbox-2.0.1.js"></script>
Are you working within a properly defined local site?
Did you save those javascript files to the js folder in your local site root?
Correct path to scripts for this test page should look like this:
<script type="text/javascript" src="../js/mootools.js"></script>
<script type="text/javascript" src="../js/bumpbox-2.0.1.js"></script>
PS. Do not add spaces to folder or file names. It can create problems for web files.
Nancy O. -
Need help with some Coldfusion data structures
Hello,
I need to keep some sort of a list that contains a page, and then that page will have associated with it values. So,
if I have page 1, I may have values 240, 245, 300. Then, on to page 2, and I will have say, 344, 29, etc.
So, what I will have is something that "could maybe" be a 2 dimensional array where one of the elements is a list?
Or, do I set up a struct say, page.number and page.value list, and put that struct in an array?
Plus, the fun part is I have to save this bad boy in session. I've been looking around the web for some examples, no
luck. So, to reiterate:
I have a page number that has to be associated with a list. That entire structure needs to be in an array or list of
some sort, and stored in session.
Thanks in advance!Really Google did not show anything like:
<cfset session.pageAry = [
{page="pageOne", numList="240,245,300"},
{page="pageTwo", numList="344,29"}]>
<cfdump var="#session.pageAry#">
OR
<cfset session.pageAry = arrayNew(1)>
<cfset arrayAppend(session.pageAry, strutNew())>
<cfset session.pageAry[1].page = "pageOne">
<cfset session.pageAry[1].numList = "240,245,300">
<cfset arrayAppend(session.pageAry, strutNew())>
<cfset session.pageAry[2].page = "pageTwo">
<cfset session.pageAry[2].numList = "344,29">
OR
The <cfscript> version of these examples. -
I need help with some character replacement
I have a package that calls another package to determine if there are any of 4 values (&,<,>,") and I want to replace the value in the package with the proper value for HTML. If I can get the & figured out I can handle the rest, I just need help getting past this part. I consider myself a novice at PL/SQL so any input is welcome. The package body gives me this message on compile:
PLS-00103: Encountered the symbol ";" when expecting one of the following:
if
I'm stuck on how to do the actual replace within the package. The code for the replace block is below: using a package and procedure in the package body. I'm using TOAD 9.x on 10gR2.
I have a feeling the the assignment of the := is having a problem but I'm not sure. This is all part of a larger chunk of code I've written to dynamically create audit triggers (before and after) for my data tables and it writes out to the audit in xml on a row by row basis. The XML insert is failing on on the 4 special characters that need to be converted to their HTML proper use.
CREATE OR REPLACE package pkg_audit_xml
as
procedure change_illegal_char
(p_new_val in varchar2,
p_old_val in varchar2,
p_has_changed in out boolean);
end;
CREATE OR REPLACE package body pkg_audit_xml
as
procedure change_illegal_char
(p_new_val in varchar2,
p_old_val in varchar2,
p_has_changed in out boolean)
is
v_temp clob;
begin
if ( nvl(p_new_val, ' ') <> nvl(p_old_val, ' ') ) then
p_has_changed := true;
p_old_val := replace(p_old_val,'&','&');
p_new_val := replace(p_new_val,'&','&');
end if;
end;
end pkg_audit_xml;
/SQL> create or replace procedure aa_test(a_old_val IN varchar2) as
2 begin
3 a_old_val := substr(a_old_val,1,4);
4 dbms_output.put_line(a_old_val);
5 end;
6 /
Warning: Procedure created with compilation errors.
SQL> show errors
Errors for PROCEDURE AA_TEST:
LINE/COL ERROR
3/2 PL/SQL: Statement ignored
3/2 PLS-00363: expression 'A_OLD_VAL' cannot be used as an assignment
target -
Need help with some simple N900 confusions/problem...
Hi All
Just got a UK N900 rx-51_2009se_2.2009.51-1.203.2_pr_203 and I'm rather struggling with some things:
MMS; didnt get any operator settings for MMS, and can't find any way of creating an MMS. Can someone enlighten me?
Can this thing not be used in portrait mode other than for the phone dial pad?
When connecting to e.g. the wireless network they have in the pub, it wants me to push a button on the router, or type a pin into the router - why can't we just have the old fashioned way of "ask the pub staff what the key is, they tell me, and i type it in" - how do I enter the wpa key as a word without this pin/button pushing nonsense?
How can I type my SMS etc with a 3x3 key pad (like a phone) - I really don't like qwerty on phones.. I'm after a portrait mode, can-be-operated-with-just-a-thumb, 3x3 button layout with predictive text (i.e. like every phone in the history of the world) - how do I do that?
I can't find any form of Switch app (to copy contacts and messages off my old device) - how do we do this painlessly?
How do I make the phone forget all the badly spelled words the previous owner seems to have entered?
Can the thing that organises the main screen snap the icons to a larger grid or must I mess around nudging with the stylus till they line up? (They tend to jump out of line just as I remove the stylus from the screen)
I'm sure I'll have more questions later..
ThanksAnswers to my own Qs for the benefits of others:
MMS; didnt get any operator settings for MMS, and can't find any way of creating an MMS. Can someone enlighten me?
No, use fMMS but be aware it's very beta, only allows picture sending with very rudimentary settings and you must change APN manually
Can this thing not be used in portrait mode other than for the phone dial pad?
No, apps have to be portrait specific and only dial pad and the browser (experimental) know of it
When connecting to e.g. the wireless network they have in the pub, it wants me to push a button on the router, or type a pin into the router - why can't we just have the old fashioned way of "ask the pub staff what the key is, they tell me, and i type it in" - how do I enter the wpa key as a word without this pin/button pushing nonsense?
No - a WONTFIX bug. Configure the connection manually in settings instead and you can type the key
How can I type my SMS etc with a 3x3 key pad (like a phone) - I really don't like qwerty on phones.. I'm after a portrait mode, can-be-operated-with-just-a-thumb, 3x3 button layout with predictive text (i.e. like every phone in the history of the world) - how do I do that?
No can do until someone on the maemo team etc creates an on screen keyboard that functions in this way
I can't find any form of Switch app (to copy contacts and messages off my old device) - how do we do this painlessly?
No. Transfer and Sync in Settings can retrieve only what Nokia Content Copier can (contacts, calendar, notes) but it's slightly more painless
How do I make the phone forget all the badly spelled words the previous owner seems to have entered?
Delete the .xxx.dictionary files from /home/user/.osso/dictionaries dir. May need to be root for this, see sites for info on adding repositories, installing rootsh etc
Can the thing that organises the main screen snap the icons to a larger grid or must I mess around nudging with the stylus till they line up? (They tend to jump out of line just as I remove the stylus from the screen) -
I'm new to flash and need help with some controls
I'm builidng a site that has a portfiolio of work to display.
When the visitor arrives at the portfolio page he (or she) is
faced with a split panel. The right panel displays a summary of a
client and the work. The left panel displays the work examples
attributed to that client. By clicking forward and backward arrows
in the right panel, the visitor can call the summaries of the
different clients. Landing on a client page 'opens' a separate swf,
called using loader component, that contains the portfolio of that
client's work into the left panel
1. I want forward and backward arrows located on the main
movie in the left panel to control the progress of the loaded swf,
rather than using forward and backward arrows on the loaded swf.
2. I want to prevent the forward and backward arrows in both
panels from clicking beyond frames in the Portfolio area of the
timeline.
3. I want the backward arrow to be innactive on the first
frame, and the forward arrow to be innactive on the last frame.
I have no problems making the arrows work on the main movie
controlling the client summaries. What I don't know how to do is
make them control the movement of the loaded swf, or #2 and #3.
Any help will be greatefully appreciated. Thanks in advance,
Art"Art Lazaar" <[email protected]> wrote in
message news:[email protected]...
> Tralfaz,
>
> Thanks for your response. I must be missing something
very simple here, but I
> can't make this work no matter what I do. Let me see if
I understand some of it:
>
> On my main movie I put the fwd_btn and rew_butn
codes...do I put these on the
> actual buttons, or in an actions time line? When I put
them on the buttons, I
> get an error report saying they need to be in an 'on'
event handler. I thought
> that's what 'onRelease' was.
>
> On my loaded movie, I place the 'one.swf' code. I'm not
sure what you mean by
> placing the code inside a loop, I don't seem to be able
to find a reference to
> using 'loop' anywhere. When I use an 'onEnterFrame', I
presume I do that with
> onEventClip(enterFrame). When I do that, if I run the
'one.swf' by itself, i
> get an error report saying onEeventClip is for movies
only. But there's no
> error report when it loads from the main movie. What
happens tho' is it loops
> continuously, even if there are stops() in it.
>
> Boy, am I confused ;)
>
> I am really baffled by this seemingly simple little
task. Your help is
> gratefully appreciated.
>
> Art
>
>
>
Hi Art,
There are different coding methods, depending on where you
put code..
1) Frame code
Click on a frame of the timeline to enter frame code
2) Attached code for movieclips and buttons
Click once on a movieclip or a button then enter attached
code
To make an onEnterFrame event for a movieclip, first chose
either frame code or attached code method. I personally rarely ever
use
attached code because it hides code in places that can be
hard to find. Almost all my coding is frame code, but it's a
personal
choice.
Frame code method to make an onEnterFrame for the main
timeline..
// put this code into a frame on the main timeline
this.onEnterFrame = function()
// do something once per frame at the frame rate
checkMyButtons(); // once per frame we will check on the
button status
OR
Attached Code method to attach an onEnterFrame event to a
movieclip
// click once on the movieclip (don't dbl click it .. stay at
the root timeline level)
onClipEvent(enterFrame)
// do something once per frame at the frame rate
Those two types of code are not interchangeable. One type
must be entered into a frame and the other style must be attached
to a
movieclip or you will get errors.
Then there is the DOT syntax way to write frame code that is
equivalent to attaching code..
myMovieClip.onRelease = function()
trace("release");
myMovieClip.onPress = function()
trace("press");
myMovieClip.onDragOut = function()
trace("drag out");
tralfaz -
I need help with some technical YouTube Settings, third party tools page
How can I add ios mobile Safari, back to my google + third-party tools page? I updated my ipad 2 to ios7 and could no longer upload videos to youtube for my blog. YouTube had been saying unrecognized file type because it's not longer compatible with ios mobile photos app.
I went into settings via the google/youtube help files and removed some old stuff from the third party apps, like blogger-an inactive blog and obviously deleted the ios moblie too that was right underneath blogger. tried jumping through their hoops, add a phone number, verify your account, lengthen your video time, add 2 step verification (which was horrible and I went back in and removed it), add a password for ipad, etc.
They (youtube/google??) have been working on stuff because there is all kinds of new things the second day I tried to figure this out via their help/redirect links. ios mobile was there before and now it's gone, even though I did not choose/select it. But I have noticed that the ipad screen is much more sensitive than it was before the ios7 update. I don't even have to touch the screen for some things, it accepts and goes on it's own while my finger is hovering over the screen.
ipad2
ios7.0.2
Safari
YouTube
Google+The Title of my post, should really be....I have ipad2 with ios7.0.3 and Safari, I can't upload videos to YouTube because of Google? or ios7?
It's now November 1st. LOL 53 folks have read my problem and it only gets better. I pleaded with Google/YouTube via Feedback form (because they are one and the same now) to please add ios mobile back to Google 3rd party apps and after checking every single day, someone finally added it back for me. Yay! Then I asked if I needed to "revoke" Google+ in the 3rd party apps because some of the help files suggested Google+ is attached to your YouTube channel and might affect uploading of videos? For the life of me, I could not figure out how to get it off my YouTube channel. And the help files didn't take me to a place to change it. Upon checking 3rd party apps, I could no longer find the page they were on, and the Google+ app icon now goes no where.
Hey, but there are new menus with all kinds of statistics now about your account, like how many subscribers you have, what the average number of minutes people watch your videos,etc. Hmm... so I tried uploading a video and it worked. I got the message that ios7.0.3 with bug fixes was available a few days ago and updated to that. I'm back to, no longer upload videos, yesterday it was still freezing on the upload screen, where you add the title of your video and all of the specs, it appears to be half uploaded with a solid blue bar half way and goes no where. I have to close the app after an hour or more. I have rebooted a couple of times every day. Today it says, we could not upload your video, we did not recognize the format of this file. And when I go to YouTube and can see all of my videos, my subscriptions, I can not remove the videos that tried to upload, they are blank gray squares. A few days ago I could edit them out. I guess they are still working on it. These are the same self recorded videos, that I have been uploading for a year, same ipad. I have sent feedback to Google/YouTube once again.
I'm completely at their mercy. I have yahoo mail, so I can't send my videos via email, even though my channel has a special email address to send videos to for upload. Yahoo will not send a video more than a minute or so. I created an AT&T email address today, and it's the same there, will not send a 15 minute video. The upload link on YouTube no longer works, there on the same page with your special email address to mail your videos in, even though there is no email that supports a 15 minute video. My husband suggested video compressing program. I have not tried to upload from a PC, I do have icloud, so that may be my next route. Other forums say they/Google/YouTube are fully aware of it and are working on it. Still 30+ days in...
It's a shame these companies can't work together, it's a shame that there is no answer, because we all have these devices we spent hundreds of dollars on and want them to work. I have been searching the web for 30+ days and no one knows the answer. Hard to believe I'm the only person having this ipad issue. -
I need help with some simple code! Please read!
hi everyone.
I'm having problems with a piece of code, and i'd be extremely greatful if somebody could give me a hand with it. I'm totally new to java and have to make a program for my university degree, but i'm finding it extremely difficult, mainly due to my total lack of apptitude for this type of thing. I know this is easy stuff, but the books I have are no use so any help would be greatly appreciated.
I have to write a program which uses two class files. I want one with the code to produce a simple button, and one to invoke it several times at different locations. I decided to write the program as one class file at first, and thought i'd be able to split it up at later. The program works fine when it is one class file. My book said that to split the two classes up, all i needed to do was change the second class to public, although this seems to not work at all. I'm at my wits end on this, and if anyone could correct my code I'd be eternally greatful.
Here is the first class... (sorry about the lack of indentation)
>>>>>>>>>>
import java.awt.*;
import java.applet.Applet;
public class Phone extends Applet {
private Image image;
public void init() {
setLayout(null);
image = getImage(getDocumentBase(), "phone.jpg");}
public void paint (Graphics g) {
g.drawImage(image, 0, 0, 700, 530, this);
PhoneButton myButton;
myButton = new PhoneButton(20,20);
>>>>>>>
This is the second class....
>>>>>>>
public class PhoneButton {
private Button butt;
public PhoneButton(int a, int b, int c){
setLayout(null);
butt = new Button();
butt.setBounds(a,b,20,20);
add(butt);
>>>>>>>>
My compiler generates errors relating to Button, but i can't do anything to please it.
Also, could anyone give me some pointers on how to add a different number or symbol to each button. That is what I added int c for, but i couldn't get it to work.
Cheers in advance.
Michael MorganI found that there are 5 error in your code.
1. You should import the "java.awt" package to the PhoneButton.java
2. The PhoneButton is not a kind of Component. You cannot not add it to the Phone class
3. the myButton = new PhoneButton(20, 20) does not provide enough parameters to create PhoneButton
4. You cannot add a Button to a PhoneButton. Becaue the PhoneButton is not a kind of Container
Fixed code:
import java.awt.*;
public class PhoneButton extends Button {
public PhoneButton(int a, int b, int c){
setBounds(a, b, 20, 20);
setLabel(String.valueOf(c));
===========================================
import java.awt.*;
import java.applet.Applet;
public class Phone extends Applet {
private Image image;
public void init() {
setLayout(null);
image = getImage(getDocumentBase(), "phone.jpg");}
public void paint (Graphics g) {
g.drawImage(image, 0, 0, 700, 530, this);
PhoneButton myButton;
myButton = new PhoneButton(20,20, 1);
======================
Visual Paradigm for UML - Full Features UML CASE tool
http://www.visual-paradigm.com/ -
Basically, the buttons are not visible when siteplan_mc is replayeed after floorplan closes, but they still work. Most things are only working on double click for soe reason, tho I have them to function on click. and the back button only woorks on unit 1 floorplan, tho the code it the same for all floorplans. I have a feeling it has something to do with levels... but I really have no idea... hopefully someone can help!
thanks in advance,
Sarah
http://www.30eastroosevelt.com/RRHA_SITE.flaThere are at least two things you're doing wrong. You can't go to a frame where something exists for the first time, and immediately do something to it. Like in your playunit functios for example:
gotoAndStop("unit1")
unit1_mc.alpha = 1
unit1_mc hasn't yet drawn itself on stage to have its alpha set, and so there's an error. That is something that was improved in Flash 10, so if you had set the Flash to publish for Flash 10 and not Flash 9, then the floor plans and the back buttons appears ok. It would sometimes work with double clicks because by the second time you clicked, the movieclip now existed. You might be able to do what you want by having all of the room units on frame 1 of the siteplan_mc, and then set their visible to true or false as you need them, instead of doing the gotoAndStop().
The other problem is that you're trying to set listeners on the Back buttons that don't yet exist. Wait until you're on the frame where the buttons exists, and then set its listener for the mouse click.
Other things you're doing could be improved too, but really you might want to get together with someone who has done more AS3, to help you become more familiar with how it works. -
Really Need Help with Some Basics!
I've done Adobe's flash tutorials, and made a numbef of
animations, and feel comfortable with that, but am having trouble
finding a good source on how to best implement a full flash site
for the web. Is there an Adobe tutorial I am missing?
Specifically, I've made an animation using the new Flash
screens feature, but am having a few problems with it. For one, the
animation is 443 kb for the full animation. Is this acceptable if I
add a preloader? (website is for a Swiss audience only - so pretty
good bandwidth)
Here's the site: (use forward and back to navigate as one of
the problems I"m having is with the buttons on the top)
http://www.genevanotebook.com/BUFFET/test.html
I've also had some problems with the navigation. Forward and
Back work, but I can't get the buttons to work (is this a limiation
in the "linear" screens feature?)
Or would someone divide this up in some way. I've though of
different possibilities like using frames (which I haven't touched
for years) and having buttons in an simple html frame, which then
opens and plays the flash files in the frame just below it. Or
would Iframes be a way of proceeding? Or is there something else I
am missing. I would be very curious to hear how you experts would
proceed with putting together a site like the one above!
Many thanks for any suggestions, including websites with good
examples of the different ways a site like mine could be
implemented for the web.Here is the link.
http://www.matthewpavkov.com/buffetscreens_edited.fla
Now, I'm going to try and explain what I did as best I can.
But please understand that I do not know very much about
actionscript, I just know how to feel my way through syntax and
where code should and shouldn't be.
First, I renamed the slides on the left. b-b-q ----> bbq1,
and so forth. This is what I believe was the main problem for the
buttons not working. My guess is you may have used the instance
name somewhere and that could affect it. The second part to the
main reason why your buttons weren't working is that you had
different code on the word buttons than the code on the picture
buttons. The code on the word buttons was the correct code. So, I
copied and pasted that code on each of the word buttons AND each of
the picture buttons, correspondingly. Then I changed each code to
match up with the new names for the slides. Doing this alone fixed
all the buttons so everything worked correctly. I also found that
you had actionscript associated with the bbq slide. If you click on
the slide on the left, you'll see the actionscript, I deleted that
as it was unnecessary. Also, make sure to use the "Auto format"
button in the actionscript plane, it's very useful for keeping
things looks clean and consistent. I did that for all the code.
Aside from this, I found nothing else wrong.
I'd also like to point out that I've never used slides
before. In fact, I only became aware of them after looking at your
file. They look like a useful feature if you're going to have many
simple pages, but I think it'd be much easier to do what you're
doing now...just have each button point to a frame (or set of
frames) in the timeline. These slides seem a little cumbersome for
a small project, not to mention I'm sure you'll have no problems
whatsoever using the frames method instead of slides.
Hope this helped. -
I need help with some basics with itunes 9
Okay, maybe it's just me, but I can't get 9 to do some of the things that I just figured out how to do with 8 so if anyone can help you would save my sanity. First, I only have a few things listed to rank my albums on top in the view section-like album, artist album artist for ex. I used to be able to see all of those on the screen. 9 has spread out these columns too wide and I would like to reduce them.
Second, I have several compilation albums like the Now that's what I call music. I had them fixed so that they would list as the total album with all the various artists. Now if I have 9 in the list view, it separates every artist in that type of album by their name. It won't just list them as an album together. If I click on the album from the side album it has the tracks all mixed up. The only way that I can see them being together and in the correct order is if I stay on the album view.
I'm sure that these are stupid things to be concerned with, but I want to be able to view my own library the way I want to view it. Any help would be greatly appreciated.Okay, maybe it's just me, but I can't get 9 to do some of the things that I just figured out how to do with 8 so if anyone can help you would save my sanity. First, I only have a few things listed to rank my albums on top in the view section-like album, artist album artist for ex. I used to be able to see all of those on the screen. 9 has spread out these columns too wide and I would like to reduce them.
Second, I have several compilation albums like the Now that's what I call music. I had them fixed so that they would list as the total album with all the various artists. Now if I have 9 in the list view, it separates every artist in that type of album by their name. It won't just list them as an album together. If I click on the album from the side album it has the tracks all mixed up. The only way that I can see them being together and in the correct order is if I stay on the album view.
I'm sure that these are stupid things to be concerned with, but I want to be able to view my own library the way I want to view it. Any help would be greatly appreciated. -
So it took me a wile and some playing around to make the page
centered. But I got what I needed. I put every thing inside a
#wrapper to get it centered but I needed some elements to stretch
out, so there width is 100%. And them being inside the #wrapper
stop that. So I took the div's out of the #wrapper and put them
back in after the </wrapper> line. That work great. In
preview. So I upload and to my shock it looks very wrong live. The
layer order is all out of whack. So I played with the z-index to
make sure they were underneath everything they needed to be. And
there was no change. Can some on have a look for me?>
http://winterslippers.com
there are 4 div's outside the #wrapper. You can see them way down
at the bottom of the code.
Thanks all!>>work's fine in Firefox the problem lies in good old
IE7
Not here. It's a disaster in FF2 & IE6. I don't think
this site can be
fixed. I can't believe the approach taken. The homepage is
not huge it's
humongous. Browser has to be 1300+ pixels wide to see the
entire page and it
doesn't create a horizontal scroll bar. Maybe some of this is
due to the 168
code errors.
http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fwinterslippers.com%2FLibrary%2Fin dex.html
As to size, the page is 1.5MB compared to a preferred target
size of 40KB.
IOW 40 times too big. You're selling consumer products.
Consumers are likely
to be using dial-up. On dial-up this page will take 5+
minutes to load.
Check out
http://www.sitepoint.com/books/.
I think their books are great.
Buy a few, take a few weeks to study & learn and then
start over.
Remember the 1st Rule of Holes: When you find yourself in
one, stop digging.
Sorry...
Walt
"satrop" <[email protected]> wrote in
message
news:f4v5sb$3mp$[email protected]..
>I should say it work's fine in Firefox the problem lies
in good old IE7 -
Hello, thanks for helping:
my problem is that I am creating a "before" and "after" situation between strings. (What a string was before.. and now what it is)
so here's the sample I created. Basically a display issue. If you run it you'll know the problem.
Thanks again for helping.
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
public class JScrollExample extends JFrame
JPanel mainpanel = new JPanel();
JTextArea text = new JTextArea();
JScrollPane scroll = new JScrollPane(text);
String[] before, after, other;
int sda, indexMaxLength;
int[] ja;
StringBuilder[] sb;
String[] name;
public JScrollExample()
getContentPane().add(mainpanel, BorderLayout.NORTH);
setTitle("JScrollExample");
text.setColumns(100);
text.setRows(30);
mainpanel.add(scroll);
before = new String[]
"asdf-asdfasdfasdf-asdf", "asdf-asdfasdfasdf-asdffdsaasdf",
"asdf-asdffdsaasdffdssasdfasdf-asdf", "AVDSDFDSasdf-asdfasdfasdf-asdf",
"asdsdfsdfsdfsdfsdsdfsdf-asddsffasdsdfsdfasdfvfdvdfvfd-asdf"
after = new String[]
"jkloolkj-iriod-3342", "jsdfsdolkj-iriod-3342", "jkloolkj-fdsfiriod-3342",
"jkloolkj-idsfsfsfsdfsdfiod-3sdfds342", "ASXkloolkj-iriod-3342MBW"
other = new String[]
"AAAAAAAAAAAAAAAAAAAA", "AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA",
"AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA", "AAAAAAAAA", "AAAAAAAAAAAAA"
indexMaxLength = 0;
sb = new StringBuilder[before.length];
ja = new int[before.length];
name = new String[before.length];
for(int j = 0; j < before.length; j++)
if(before[j].length() > before[indexMaxLength].length())
indexMaxLength = j;
sda = before[indexMaxLength].length();
for(int i = 0; i < before.length; i++)
ja[i] = ((sda - before.length()) + 25);
for(int j = 0; j < ja.length; j++)
sb[j] = new StringBuilder("");
for(int g = 0; g < ja[j]; g++)
sb[j].append(" -");
text.append("I'm trying to make it look nice and neat," +
"and have each line have same amount of '-' " + "I tried doing it " +
"and this is what I got. Basically what i'm doing is finding " +
"the longest string, subtracting each string's \nlength with the " +
" longest one, then adding 25, to get an equal value, then using " +
"that value to put that many '-' in between before and after. But " +
"because every character has a different size, it doesn't work\n " +
"unless all the characters are the same\n\n");
for(int i = 0; i < before.length; i++)
String y = (after[i]);
text.append(before[i] + sb[i].toString() + "> " + y + "\n");
indexMaxLength = 0;
sb = new StringBuilder[before.length];
ja = new int[before.length];
for(int j = 0; j < other.length; j++)
if(other[j].length() > other[indexMaxLength].length())
indexMaxLength = j;
sda = other[indexMaxLength].length();
for(int i = 0; i < other.length; i++)
ja[i] = ((sda - other[i].length()) + 25);
for(int j = 0; j < ja.length; j++)
sb[j] = new StringBuilder("");
for(int g = 0; g < ja[j]; g++)
sb[j].append(" -");
text.append("\n\nWHAT I WANT IS THIS: \n\n");
for(int i = 0; i < other.length; i++)
String y = (after[i]);
text.append(other[i] + sb[i].toString() + "> " + y + "\n");
public static void main (String[] args)
JFrame.setDefaultLookAndFeelDecorated(true);
JScrollExample frame = new JScrollExample();
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
frame.setVisible(true);
frame.pack();what methods do you think I should use?I think you should use the monospaced font.
I went to the font metrics page, and I understand what it does.Well, then you should realize that you can't be guaranteed that your column will line up if you attempt to use the FontMetrics class. All the FontMetrics class can tell you is the width of a String.
You can calculate the width of your longest String and then calculate the width of 25 " -" to get the total width before the second colum. Lets assume this width is 500. Now lets also assume that each " -" string is 10 pixels.
If we have "i" as the only text and its width is 3 pixels, then how do you calculate a multiple of " -" which will total to 500 pixels?
Similiarly if you have a "W" as the text and its width is 7 pixels you will never be able to add characters that will total to 500 pixesl.
So if you need "- - - - >" between column 1 and column 2 the easiest solution is to use a monospaced font.
If on the other hand you only care about column two lining up in the same postion each time, then you may be able to use tabs in a JTextPane as you can easily control the placement of text for each tab. This posting will give you an idea:
http://forum.java.sun.com/thread.jspa?forumID=57&threadID=585006
Maybe you are looking for
-
Closing references to front panel objects
Short version of my question: are programmatically generated references to front panel objects (controls, etc.) automatically disposed of when the VI exits? More details: I'm recursively retrieving references to all the controls on the front panel.
-
URGENT: Wrong Info on Return Labels for Exchange Orders.
Hi! SAP Gurus Exchange orders are being shipped with labels attached on the box that says DO not return defective part and because of this the customer will either dispose of the part, and therefore the business will not receive the defective back an
-
It´s possible deploy ADF Demo in Tomcat 6 ???
Hi. I deploy the ADF Demo (http://www.oracle.com/technetwork/developer-tools/adf/downloads/index.html), in Weblogic 10.3.3. But I´m triying to deploy the war demo, in tomcat. But i can´t. It´s possible deploy this application??. I Think that is possi
-
Contract - Sales Order - Production Order
Hi all, i met an error regarding account assignment in sales order. i create sales order refer to contract, then my PP consultant wanna create Production order that refer to sales order, but an error appears. Error: Account assignment cannot be carri
-
activation required