I need help with the adjustment brush.

When I first started using Lightroom, the adjustment brush worked fine. Now, I will select the adjustment brush, click on the photo I'm editing, and a red circle will appear depending on the circumference I chose. If I look at the thumbnail in the navigation sidebar to the left, the red circle appears as a black circle in that photo. In addition, none of the sliders will work with the exception of the exposure adjuster. However, the effects of adjusting the exposure only appear in the thumbnail in the navigation sidebar; the main image will stay red in the area selected. Does anybody have a clue how to fix this?

Press the [o] key (overlay) to make the red overlay disappear.  The black that appears in your thumbnail is likely caused by a very high negative exposure value for the brush.  It also sounds like you have the Adjustment Brush panel partially collapesed.  On the same line as the word Effect: on the right side is a small black triangle, click on it to expand. These are the sliders that go with the brush - not hte sliders in the basic panel which I suspect you are using.

Similar Messages

  • I need help with the roto brush tool, please?

    whenever I go to roto brush my clip, I start off by making my first stroke. When I do this it changes the layer time, and it is not synced up any more. If I uncheck the render box it goes to the next frame. Whenever I make a stroke, it does not effect the frame I drew on, but the one after. Any help?

    Here we go. I have AE CS6. I'm trying to roto scope a bit of footage that is easily longer than 30 seconds. I have windows 7. When I started out roto scoping, it worked fine. At one point I clicked page down and nothing happened. When I clicked it again it went to the next frame as it should have done. Then, when I tried to corrections to the roto scope, nothing happened. No matter where I drew, either using the foreground or background tool, you know the red dot or the green dot, nothing happened. When I push page down it goes to the next frame and everything I drew on the previous frame happened on that frame. Therfore, whenever I use the rotoscope, it is not working on the frame I am drawing on but the one after. When ever I check the render box the view is now the next frame, not the frame I am working on. When I recheck the render box it goes back to the previous frame that I was working in, but nothing was happening. I restarted the roto brush tool to see if that would help. When I make my original line for the foreground there is a short pause, then it acts like the brush should. I noticed in the time line that the layer I was working on sifted over a frame to the right. If I control+z it the history says undo layer time change.
    Is that enough information to get some help?

  • Need help with the Vibrance adjustment in Photoshop CC 2014.

    Need help with the Vibrance adjustment in Photoshop CC 2014.
    Anytime I select Vibrance to adjust the color of an image. The whole image turns Pink in the highlights when the slider is moved from "0" to - or + in value.  Can the Vibrance tool be reset to prevent this from happening? When this happens I cn not make adjustments...just turns Pink.
    Thanks,
    GD

    Thank you for your reply. 
    Yes, that does reset to “0” and the Pink does disappear.
    But as soon as I move the slider +1 or -1 or higher the image turns Pink in all of the highlights again, rather than adjusting the overall color.
    GD
    Guy Diehl  web: www.guydiehl.com | email: [email protected]

  • Hi! I have a problem with the adjustment brush some are not there anymore like soften skin, how i can fix that?

    Hi! I have a problem with the adjustment brush some are not there anymore like soften skin, how i can fix that?

    Hi dear,
    it's funny, real funny.
    I think the programmes have diffrent sound system from the normal calls system.
    All you need to do is to turn the sound up from the bottom in the phone side in the time you're making or recieving the call.
    you'll hear the sound.
    I hope that would help.
    All the best

  • Something very strange is happening with the adjustment brush

    When I brush over an area of a photo with the adjustment brush, LR does not select all of the area I brushed over, regardless how many times I go over it.  The unselected spots look like pepper sprinkled on mashed potatoes, small dots that will not select, and so will not do whatever effect I'm trying to do. Like if I brush a hillside, the little dots will appear (apparently randomly) If I change the color temp the selected area changes like it should but the little specks do not change.  LR will not select them.  Please help.

    Sorry, not the right answer. But thankx for taking a shot. According to
    Adobe LR does not have enough pixels when I'm working on a macro subject
    (say a butterfly that I'm trying to work on at 2x in the navigator) there
    just are not enough pixels. So I have to transfer projects that deal with
    micro subject into PS, PS had  no problem detecting the holed and filling
    them in, what I've got to do is select using the magic pen or whatever
    works best and then make adjustments to the selection. We do that, no
    problem.  Then back to LR for larger more general adjustments. I have no
    idea why, WHY Adobe would have two programs that work so closely together
    and yet not have identical selection abilities. That's a mistake in my book.
    On Sun, Oct 12, 2014 at 11:13 PM, Bob Somrak <[email protected]>

  • Why don't changes made in camera raw with the adjustment brush carry into photoshop?

    Why don't changes made in camera raw with the adjustment brush carry into photoshop?

    Using the Open button in ACR to get to PS doesn’t create a PSD or a TIF, it just transfers the image in memory. 
    As has been asked, already, what are the precise steps of your workflow starting with your painting the adjustment brush strokes in ACR and seeing the image in PS without the strokes, and what exact versions of PS and ACR are you using? 
    Use Help / About Photoshop..., and Help / About Plug-ins... / Camera Raw...

  • Continual problem with the Adjustment brush in both Lightroom 3 and Lightroom 4

    The Adjustment brush in both Lightroom 3 and Lightroom 4 continually stops functioning correctly - that is any adjustment made using the sliders in the Adjustment Brush panel does not make an adjustment on the image.      Normally I would go to Library / Preferences [on my iMac OSX 10.6.8], remove the com.adobe.Lightroom3.plist file and restart Lightroom.     However I have gone to Library/Preferences and there is no listing of any Lightroom 3 plist files, nor for that matter any adobe Photoshop CS5 plist files or any adobe Lightroom 4 plist files.      I have tried restarting the iMac but to no avail - no help at all!      I have no idea how to remedy the situation as I have no idea where the plist files have gone!!!
    Incidentally I have a new iMac 27" OSX 10.8 - same problem with the Adjustment Brush there, but so far the plist files haven't disappeared into the ether somewhere!
    Help would be appreciated  ...
    Many thanks

    Hi Jussi
    I tried changing to the B brush set, and the Adjustment Brush worked OK in there for a while - but now I have the same problem with the B brush set too.     It appears to happen instantly - one minute they're working, the next minute they're not!!         For example, I was adjusting Brightening using the Adjustment Brush and I literally made an adjustment on one image, then went back into the same image seconds later to make a further Brightening adjustment and the brush wasn't working - well, that is, not unless I pushed the slider to something like 160 and then I got minimal adjustment!!!       I am becoming increasingly frustrated  ..   I have literally worked for months with no problems, now it's almost every day!!

  • I need help with the iPad Remote app to connect to apple TV 2

    I need help with the iPad Remote app to connect to apple TV 2 I have the app already on my ipad and when I open it only shows my itunes library and not the small black Apple TV 2 icon! How do i fix this and i know it's something 

    Get the manual at http://manuals.info.apple.com/en_US/AppleTV_SetupGuide.pdf
     Cheers, Tom

  • I need help with the photo stream. Everytime I try to open it on my PC it says photo stream is unable and I have tried everuthing to enable it but it doesn't work. Any help, please?

    I need help with the photo stream. Everytime I try to open it on my PC it says photo stream is unable and I have tried everuthing to enable it but it doesn't work. Any help, please?

    Freezing, or crashing?
    ID on the Mac can produce reports that may (or may not) prove helpful in diagnosing the problem. I suspect this is something not directly related to InDesign, and maybe not to any of the Adobe apps directly since you seem to be having a problem in more than one. That often inidcates a problem at the system level.
    Nevertheless, it won't hurt to try to gather the reports. You'll find driections for how to generate them, and to post them on Pastebin.com (then put a link to them here) so we can see what's going on at Adobe Forums: InDesign CS5.5 Not Responding
    Do you happen to run a font manager? If so, which one, and waht version?

  • Need help with the session state value items.

    I need help with the session state value items.
    Trigger is created (on After delete, insert action) on table A.
    When insert in table B at least one row, then trigger update value to 'Y'
    in table A.
    When delete all rows from a table B,, then trigger update value to 'N'
    in table A.
    In detail report changes are visible, but the trigger replacement value is not set in session value.
    How can I implement this?

    You'll have to create a process which runs after your database update process that does a query and loads the result into your page item.
    For example
    SELECT YN_COLUMN
    FROM My_TABLE
    INTO My_Page_Item
    WHERE Key_value = My_Page_Item_Holding_Key_ValueThe DML process will only return key values after updating, such as an ID primary key updated by a sequence in a trigger.
    If the value is showing in a report, make sure the report refreshes on reload of the page.
    Edited by: Bob37 on Dec 6, 2011 10:36 AM

  • Need Help with the Clone Tool

    I need help with the clone tool, in that when I clone (let's say grass as example),  the new cloned area does NOT come out as sharp as the area selected.  It comes out much softer and somewhat blurred.  I have the opacity and flow both set at 100%.  This is very frustrating since I can not get a true clone.

    what "tip" do you have selected? where are you sampling from ( found in top option bar) ALSO make sure MODE is normal
    http://helpx.adobe.com/photoshop/using/retouching-repairing-images.html
    -janelle

  • I need help with the Quote applet.

    Hey all,
    I need help with the Quote applet. I downloaded it and encoded it in the following html code:
    <html>
    <head>
    <title>Part 2</title>
    </head>
    <body>
    <applet      codebase="/demo/quote/classes" code="/demo/quote/JavaQuote.class"
    width="300" height="125" >
    <param      name="bgcolor"      value="ffffff">
    <param      name="bheight"      value="10">
    <param      name="bwidth"      value="10">
    <param      name="delay"      value="1000">
    <param      name="fontname"      value="TimesRoman">
    <param      name="fontsize"      value="14">
    <param      name="link"      value="http://java.sun.com/events/jibe/index.html">
    <param      name="number"      value="3">
    <param      name="quote0"      value="Living next to you is in some ways like sleeping with an elephant. No matter how friendly and even-tempered is the beast, one is affected by every twitch and grunt.|- Pierre Elliot Trudeau|000000|ffffff|7">
    <param      name="quote1"      value="Simplicity is key. Our customers need no special technology to enjoy our services. Because of Java, just about the entire world can come to PlayStar.|- PlayStar Corporation|000000|ffffff|7">
    <param      name="quote2"      value="The ubiquity of the Internet is virtually wasted without a platform which allows applications to utilize the reach of Internet to write ubiquitous applications! That's where Java comes into the picture for us.|- NetAccent|000000|ffffff|7">
    <param      name="space"      value="20">
    </applet>
    </body>
    </html>When I previewed it in Netscape Navigator, a box with a red X appeared, and this appeared in the console when I opened it:
    load: class /demo/quote/JavaQuote.class not found.
    java.lang.ClassNotFoundException: .demo.quote.JavaQuote.class
         at sun.applet.AppletClassLoader.findClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at sun.applet.AppletClassLoader.loadClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at sun.applet.AppletClassLoader.loadCode(Unknown Source)
         at sun.applet.AppletPanel.createApplet(Unknown Source)
         at sun.plugin.AppletViewer.createApplet(Unknown Source)
         at sun.applet.AppletPanel.runLoader(Unknown Source)
         at sun.applet.AppletPanel.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    Caused by: java.io.FileNotFoundException: \demo\quote\JavaQuote\class.class (The system cannot find the path specified)
         at java.io.FileInputStream.open(Native Method)
         at java.io.FileInputStream.<init>(Unknown Source)
         at java.io.FileInputStream.<init>(Unknown Source)
         at sun.net.www.protocol.file.FileURLConnection.connect(Unknown Source)
         at sun.net.www.protocol.file.FileURLConnection.getInputStream(Unknown Source)
         at sun.applet.AppletClassLoader.getBytes(Unknown Source)
         at sun.applet.AppletClassLoader.access$100(Unknown Source)
         at sun.applet.AppletClassLoader$1.run(Unknown Source)
         at java.security.AccessController.doPrivileged(Native Method)
         ... 10 more
    Exception in thread "Thread-4" java.lang.NullPointerException
         at sun.plugin.util.GrayBoxPainter.showLoadingError(Unknown Source)
         at sun.plugin.AppletViewer.showAppletException(Unknown Source)
         at sun.applet.AppletPanel.runLoader(Unknown Source)
         at sun.applet.AppletPanel.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    java.lang.NullPointerException
         at sun.plugin.util.GrayBoxPainter.showLoadingError(Unknown Source)
         at sun.plugin.AppletViewer.showAppletStatus(Unknown Source)
         at sun.applet.AppletPanel.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)What went wrong? and how can I make it run correct?
    Thanks,
    Nathan Pinno

    JavaQuote.class is not where your HTML says it is. That is at the relative URL "/demo/quote/".

  • I need Help with the dynamic link feature in CS3

    Hi I was wondering if anyone could help me with an issue I am having? I have the adobe cs3 master collection. Having watched tutorials on the dynamic link feature my version seems not to have the same options as those I have viewed. I wish to send my premiere video creation to encore using dynamic link, however when I click "file" and then "adobe dynamic link" the only options available are about "adobe after effects". I can export to encore however I am only alloowed to export one premiere sequence to one new encore file, I cannot create an encore file and import several premiere sequence into the same encore project. That means currently I can only have an encore creation with one premiere sequence in it, and I have no adobe dynamic link. Any help anyone could offer would be greatly appreciated.

    Thanks very much for that guys but my premiere media encoder only lets me export as: MPEG1, MPEG1-VCD, MPEG2, MPEG2 blu-ray, MPEG2-DVD, MPEG2-SVCD, H.264, H.264 blu-ray, Adobe Flash Video, Quicktime, Real Media, Windows Media. Are any of these formats DV AVI?
    Am I to export my videos direct to encore or save them elsewhere (e.g desktop). It seems that I cannot export sequences from different premiere projects to the same encore project.
    Sorry if any of these questions seem obvious, I am just new to premiere and keen to do things right from the off.
    Many thanks again guys.
    Date: Tue, 24 Nov 2009 19:32:47 -0700
    From: [email protected]
    To: [email protected]
    Subject: I need Help with the dynamic link feature in CS3
    Harm is correct.  For SD DVD, exporting as a DV AVI file from Pr will give you good results.  Encore's Automatic Transcoding will give you maximum quality for the available disc space.
    -Jeff
    >

  • HT4528 Hi  I need help with the volume on my phone  even on speaker i can barely hear who I am speaking with

    Hi I need help with the volume on my phone, even on speaker I can barely hear who I am speaking with . How do I make it louder /

    Hi there,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/ts1630
    -Griff W.

  • I am needing help with the final steps in restoring my iPod Touch 5

    I need help with the final steps in restoring my iPod

    I was told that the iPod would automatically go to restore mode when connected to wifi. It did not do that

Maybe you are looking for