I need help with the following commands
I had to reformat my Imac. At first I didn´t knew how to do it... so I google for some info and I found this:
start iMac while holding down the CMD+S for the computer to boot into single user mode.
Then:
Type: /sbin/mount -uw / ENTER
Type: rm /var/db/.applesetupdone ENTER
Type: rm -R /Users/* ENTER
Type: shutdown -h now ENTER
the iMac is turned off and is like new.
After I did this nothing happend.... So I called the Technical Service and they explained me very well how to reformat my iMac.
start iMac while holding down alt
Then:
Recovery HD > Disk Utility
Then:
Select Macintosh HD and Erase ...
After doing this... I reinstalled Lion from the internet.
My questions are:
Does the introduction of the commands (/sbin/mount -uw / ENTER, rm /var/db/.applesetupdone ENTER, etc...) may have caused a problem??
If so.. reformat the imac as the Technical Service explained me would have solved??
Thanks a lot
Yes all solved :-(
Similar Messages
-
I Need help with the following error:
Hi, I am getting the following error:
<b>BPE_ADAPTER">SYSTEM_FAILURE_INTERNAL</b>
I have looked at some of the other threads that deal with this but since I am new to XI I am not sure where to look. I have tried to activate in SXI_CACHE and I get a code of 99 with the following error. I did not get this error in the QAS environment, only when it was moved to Prod. We have cleared and reset all of the caches and am still getting this error when I try to activate in SXI_CACHE:
<b>E 'STATUSCODE' is not a component of data object 'PAYLOAD'</b>
Can someone point me in the right direction to fix this? We just moved it to prod and need to get it fixed asap.
Thanks in advance for all of the help.
Mike CurtisHi Michael,
Before SP16:
the problem should be solved with the help of note 890760. You might find note
816430 interesting as well, but the first one should help you solve the problem.
After:
If those are already in your system, have a look at note 996631. This could be
the solution.
Regards and good luck with XI.
Jaime -
I would need help with saving some eamil messages to a disk to unclutter my email. How can I do this please?
Thanks.
ElisabethOpen the email and then from the File menu select Save As Rich Text Format. That'll save it to open in TextEdit. If you want a pdf then open the email and do command-p (Print) and then from the PDF drop down box lower left corner select Save as PDF.
-
Need help with the following condition code
Hi All,
I am creating CreditMemo based on the open amount and I have option to create either up to 4 credit memo's or open amount is zero. When I create the CM initially then cmponum1 has to be updated in the table, for second CM cmponum2 has to be updated.
The created CM number comes out from the function as 'Salesdocument'.
The following code I wrote is working fine for CM1, if I have the CM2 then it is updating CMPONUM2 but update command is making CMPONUM1 as zero, so for CM3 as CM1 was updated as zero it is going to CMPONUM1 instead of CMPONUM3.
Can some one please help me with this code.
Thanks,
Veni.
DATA: zcmponum1 type zsdcoop-cmponum,
zcmponum2 type zsdcoop-cmponum,
zcmponum3 type zsdcoop-cmponum,
zcmponum4 type zsdcoop-cmponum.
If zsdcoop-cmponum1 is initial.
zcmponum1 = salesdocument.
elseif zsdcoop-cmponum2 is initial.
zcmponum2 = salesdocument.
elseif zsdcoop-cmponum3 is initial.
zcmponum3 = salesdocument.
elseif zsdcoop-cmponum4 is initial.
zcmponum4 = salesdocument.
endif.
Update zsdcoop
set
cmponum1 = zcmponum1
cmponum2 = zcmponum2
cmponum3 = zcmponum3
cmponum4 = zcmponum4
where kunnr = zsdcoop-kunnr and pfnum = zsdcoop-pfnum.Hi All,
This code solved my req.
If zsdcoop-cmponum is initial.
zcmponum = salesdocument.
Update zsdcoop
set cmponum = zcmponum
where kunnr = zsdcoop-kunnr and pfnum = zsdcoop-pfnum.
elseif zsdcoop-cmponum2 is initial.
zcmponum2 = salesdocument.
Update zsdcoop
set cmponum2 = zcmponum2
where kunnr = zsdcoop-kunnr and pfnum = zsdcoop-pfnum.
elseif zsdcoop-cmponum3 is initial.
zcmponum3 = salesdocument.
Update zsdcoop
set cmponum3 = zcmponum3
where kunnr = zsdcoop-kunnr and pfnum = zsdcoop-pfnum.
elseif zsdcoop-cmponum4 is initial.
zcmponum4 = salesdocument.
Update zsdcoop
set cmponum4 = zcmponum4
where kunnr = zsdcoop-kunnr and pfnum = zsdcoop-pfnum.
endif.
Thanks,
Veni. -
Need help with the following query
I have the following data
INVOICE_ID PAID_AMT PYMNT_GROSS_AMT DISCOUNT
10151 1375 1375 55
10151DC -44.81 -44.81 0
20017 25 25 7
Ok the data I want to grab the discount field is paid_amt = pymnt_gross_amt and discount <> 0. If however there is another invoice_id out there (same invoice ID except with a DC appended to it like 10151DC) then you want to select the differece between the discount field without the DC and the Invoice ID with the DC the paid_amt field.
So the results would be.
Invoice_ID Discount
10151 10.19
20017 7
Thanks for all your help!Why scan same table twice when it can be achived using single scan :
Hope this helps :
with inv_data as
(select '10151' invoice_id,
1375 paid_amt,
1375 pymnt_gross_amt,
55 discount from dual
union all
select '10151DC' invoice_id,
-44.81 paid_amt,
-44.81 pymnt_gross_amt,
0 discount from dual
union all
select '20017' invoice_id,
25 paid_amt,
25 pymnt_gross_amt,
7 discount from dual)
select replace(invoice_id,'DC') invoice_id,
sum(case when invoice_id like '%DC' then pymnt_gross_amt
else discount end) discount
from inv_data
group by replace(invoice_id,'DC')
INVOICE DISCOUNT
10151 10.19
20017 7
2 rows selected. -
Need help with the following scenario
Hi guys,
I have to implement a solution which requires me to duplicated all the rows from a table to another in reverse order. For eg. I have table1 containing the following rows:
200, 350, 700, 90
All these numbers are sorted according to their ROW_ID_BLOCK_NUMBER. When these rows are replicated over to another table, say table2, it should be inserted in the following order:
90, 700, 350, 200
I do not have another column column that stores the running identity number for each row and I don't intend to implement that right now. I was wondering if that can be implemented using the DBMS_ROWID package and if so, how? Any help is greatly appreciated here. Thanks in advance.In 10g, assuming you've built a table with row dependencies enabled
SCOTT @ jcave102 Local> create table a (
2 col1 number
3 )
4 rowdependencies;
Table created.
Elapsed: 00:00:00.04the ORA_ROWSCN pseudocolumn will tell you the SCN (system change number) of the transaction that inserted the rows
SCOTT @ jcave102 Local> insert into a values( 1 );
1 row created.
Elapsed: 00:00:00.07
SCOTT @ jcave102 Local> insert into a values( 2 );
1 row created.
Elapsed: 00:00:00.01
SCOTT @ jcave102 Local> commit;
Commit complete.
Elapsed: 00:00:00.00
SCOTT @ jcave102 Local> insert into a values( 3 );
1 row created.
Elapsed: 00:00:00.04
SCOTT @ jcave102 Local> commit;
Commit complete.
Elapsed: 00:00:00.01
SCOTT @ jcave102 Local> select ora_rowscn, col1 from a;
ORA_ROWSCN COL1
6270940 1
6270940 2
6270944 3
Elapsed: 00:00:00.09Sorting on that, assuming you insert the rows in the right logical order, should work (the documentation only guarantees that the SCN of the row is greater than or equal to the SCN when a row was modified, so it's not guaranteed, but I don't know of a mechanism that would cause the ORA_ROWSCN to change without DML affecting the row in this example so it's relatively safe, at least with your current Oracle version). If ROWDEPENDENCIES is not set, the default is that the SCN is tracked at the block rather than the row level.
Justin -
Need help with the following code (Want an input popup with numeric pad)
Hello,
I put the following code in an event :
import javax.swing.JOptionPane;
value = javax.swing.JOptionPane.showInputDialog("Price", "");
try {
Double newPrice = new Double(value);
line.setPriceTax(newPrice);
} catch (NumberFormatException e) {
JOptionPane.showMessageDialog(null, "Not valid number: " + value, "Error", JOptionPane.PLAIN_MESSAGE);
But this only gives an input popup screen and then i have to use a keyboard instead of my touchscreen to give the input,
i would rather like it to be a popup input screen with a numeric pad attached.
Is this possible, and how??
Thanks in advance.
Jeroenhii,
set321go wrote
make your own. Create a custom OptionPane and add --->
// global def.
private final JLabel amountLabel = new JLabel(" Input Trades Amount : ");
private JFormattedTextField amountTextField;
private double amount = 0.00;
private NumberFormat amountFormat;
// in panel class add --->
amountFormat = NumberFormat.getNumberInstance();
amountFormat.setMinimumFractionDigits(2);
amountFormat.setMaximumFractionDigits(2);
amountFormat.setRoundingMode(RoundingMode.HALF_EVEN);
amountLabel.setFont(new Font("Serif", Font.BOLD, 16));
amountLabel.setForeground(KopikSalesTest.textColor);
amounTextField = new JFormattedTextField(amountFormat);
amountTextField.setValue(0.00);
amountTextField.setFont(new Font("Serif", Font.BOLD, 20));
amountTextField.setForeground(Color.someColor);
amountTextField.setBackground(Color.someColor);
amountTextField.addFocusListener(new FocusListener() {
public void focusGained(FocusEvent e) {
amountTextField.requestFocus();
amountTextField.setText(amountTextField.getText());
amountTextField.selectAll();
public void focusLost(FocusEvent e) {
//on exit
somePanel.add(amountLabel);
somePanel.add(amountTextField); ... kopik -
Need help with the following kernel panic message
Interval Since Last Panic Report: 343442 sec
Panics Since Last Report: 1
Anonymous UUID: 20AE5901-94AA-497D-A08A-83DE6176E55A
Mon May 16 15:17:40 2011
panic(cpu 1 caller 0xffffff80002d1208): Kernel trap at 0xffffff80002c3762, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0xffffff80c95ab404, CR3: 0x00000000514f3000, CR4: 0x0000000000040660
RAX: 0xffffff800085ae38, RBX: 0x0000000000000000, RCX: 0x0000000000000004, RDX: 0x0000000000000004
RSP: 0xffffff80b2042948, RBP: 0xffffff80b20429a0, RSI: 0xffffff80c95ab404, RDI: 0xffffff80a9a2fd20
R8: 0x0000000000001800, R9: 0xffffff80a9a2fd20, R10: 0x00000000159ab001, R11: 0xffffff7f80e88fe2
R12: 0xffffff80a9a2fd20, R13: 0xffffff80c95ab404, R14: 0x0000000000001800, R15: 0x0000000000000020
RFL: 0x0000000000010202, RIP: 0xffffff80002c3762, CS: 0x0000000000000008, SS: 0x0000000000000010
Error code: 0x0000000000000000
Backtrace (CPU 1), Frame : Return Address
0xffffff80b20425e0 : 0xffffff8000204d15
0xffffff80b20426e0 : 0xffffff80002d1208
0xffffff80b2042830 : 0xffffff80002e3f4a
0xffffff80b2042840 : 0xffffff80002c3762
0xffffff80b20429a0 : 0xffffff7f80ea59e7
0xffffff80b2042a70 : 0xffffff7f80ea52ef
0xffffff80b2042ac0 : 0xffffff7f80e79966
0xffffff80b2042ba0 : 0xffffff80005523e8
0xffffff80b2042be0 : 0xffffff8000553029
0xffffff80b2042c60 : 0xffffff80005537d6
0xffffff80b2042db0 : 0xffffff80002ba1c4
0xffffff80b2043e50 : 0xffffff8000205536
0xffffff80b2043e80 : 0xffffff80002029eb
0xffffff80b2043ef0 : 0xffffff8000274176
0xffffff80b2043f60 : 0xffffff80002c3095
0xffffff80b2043fa0 : 0xffffff80002e4894
Kernel Extensions in backtrace (with dependencies):
com.apple.driver.AppleIntelHDGraphics(6.3.4)@0xffffff7f80e61000->0xffffff7f80f3 6fff
dependency: com.apple.iokit.IOPCIFamily(2.6.3)@0xffffff7f8081d000
dependency: com.apple.iokit.IONDRVSupport(2.2)@0xffffff7f8087b000
dependency: com.apple.iokit.IOGraphicsFamily(2.2)@0xffffff7f80853000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
10J4138
Kernel version:
Darwin Kernel Version 10.7.4: Mon Apr 18 21:24:17 PDT 2011; root:xnu-1504.14.12~3/RELEASE_X86_64
System model name: MacBookPro8,1 (Mac-94245B3640C91C81)
System uptime in nanoseconds: 48514690935839
unloaded kexts:
com.apple.driver.AppleUSBUHCI 4.2.0 (addr 0xffffff7f810e4000, size 0x65536) - last unloaded 95251705762
loaded kexts:
com.pgp.kext.PGPnke 1.1.0
com.vmware.kext.vmnet 3.1.2
com.vmware.kext.vmioplug 3.1.2
com.vmware.kext.vmci 3.1.2
com.vmware.kext.vmx86 3.1.2
com.pgp.iokit.PGPwdeDriver 1.2.0d1
com.rim.driver.BlackBerryUSBDriverInt 0.0.64
com.apple.filesystems.afpfs 9.7 - last loaded 34795666277000
com.apple.nke.asp_tcp 5.0
com.apple.driver.AppleBluetoothMultitouch 54
com.apple.driver.AppleHWSensor 1.9.3d0
com.apple.driver.IOBluetoothBNEPDriver 2.4.5f1
com.apple.filesystems.autofs 2.1.0
com.apple.driver.AGPM 100.12.31
com.apple.driver.AppleMikeyHIDDriver 1.2.0
com.apple.driver.AppleHDA 2.0.5f13
com.apple.driver.AppleMikeyDriver 2.0.5f13
com.apple.driver.AppleUpstreamUserClient 3.5.7
com.apple.driver.AppleMCCSControl 1.0.20
com.apple.driver.AudioAUUC 1.57
com.apple.driver.AppleIntelHDGraphics 6.3.4
com.apple.driver.SMCMotionSensor 3.0.1d2
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.1.6
com.apple.driver.ACPI_SMC_PlatformPlugin 4.7.0a1
com.apple.driver.AppleLPC 1.5.1
com.apple.driver.AppleBacklight 170.0.46
com.apple.kext.AppleSMCLMU 1.5.2d10
com.apple.driver.AppleIntelSNBGraphicsFB 6.3.4
com.apple.driver.AppleUSBTCButtons 201.2
com.apple.driver.AppleUSBTCKeyboard 201.2
com.apple.driver.AppleIRController 303.8
com.apple.iokit.SCSITaskUserClient 2.6.8
com.apple.BootCache 31
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.iokit.IOAHCIBlockStorage 1.6.4
com.apple.driver.AppleSDXC 1.0.2
com.apple.iokit.AppleBCM5701Ethernet 3.0.5b8
com.apple.driver.AppleFWOHCI 4.7.3
com.apple.driver.AirPort.Brcm4331 432.11.3
com.apple.driver.AppleUSBHub 4.2.0
com.apple.driver.AppleEFINVRAM 1.4.0
com.apple.driver.AppleSmartBatteryManager 160.0.0
com.apple.driver.AppleAHCIPort 2.1.7
com.apple.driver.AppleACPIButtons 1.3.6
com.apple.driver.AppleUSBEHCI 4.2.0
com.apple.driver.AppleRTC 1.3.1
com.apple.driver.AppleHPET 1.5
com.apple.driver.AppleSMBIOS 1.7
com.apple.driver.AppleACPIEC 1.3.6
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 142.6.0
com.apple.security.sandbox 1
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.11
com.apple.driver.AppleIntelCPUPowerManagement 142.6.0
com.apple.driver.IOBluetoothHIDDriver 2.4.5f1
com.apple.driver.AppleMultitouchDriver 207.11
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.DspFuncLib 2.0.5f13
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.iokit.IOSurface 74.2
com.apple.iokit.IOBluetoothSerialManager 2.4.5f1
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.iokit.IOAudioFamily 1.8.3fc2
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleHDAController 2.0.5f13
com.apple.iokit.IOHDAFamily 2.0.5f13
com.apple.iokit.AppleProfileFamily 41
com.apple.driver.IOPlatformPluginFamily 4.7.0a1
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleBacklightExpert 1.0.1
com.apple.iokit.IONDRVSupport 2.2
com.apple.driver.AppleSMC 3.1.0d5
com.apple.driver.AppleThunderboltEDMSink 1.0.5
com.apple.driver.AppleThunderboltEDMSource 1.0.5
com.apple.iokit.IOGraphicsFamily 2.2
com.apple.driver.BroadcomUSBBluetoothHCIController 2.4.5f1
com.apple.driver.AppleUSBBluetoothHCIController 2.4.5f1
com.apple.iokit.IOBluetoothFamily 2.4.5f1
com.apple.driver.AppleThunderboltDPOutAdapter 1.2.0
com.apple.driver.AppleThunderboltDPInAdapter 1.2.0
com.apple.driver.AppleThunderboltDPAdapterFamily 1.2.0
com.apple.driver.AppleThunderboltPCIDownAdapter 1.1.5
com.apple.driver.AppleUSBMultitouch 207.5
com.apple.iokit.IOUSBHIDDriver 4.2.0
com.apple.driver.XsanFilter 402.1
com.apple.driver.AppleUSBMergeNub 4.2.2
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.8
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6.1
com.apple.iokit.IOAHCISerialATAPI 1.2.6
com.apple.driver.AppleThunderboltNHI 1.2.3
com.apple.iokit.IOThunderboltFamily 1.3.5
com.apple.iokit.IOFireWireFamily 4.2.6
com.apple.iokit.IO80211Family 320.1
com.apple.iokit.IONetworkingFamily 1.10
com.apple.iokit.IOUSBUserClient 4.2.0
com.apple.iokit.IOAHCIFamily 2.0.6
com.apple.driver.AppleEFIRuntime 1.4.0
com.apple.iokit.IOHIDFamily 1.6.6
com.apple.iokit.IOSMBusFamily 1.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 6
com.apple.iokit.IOUSBMassStorageClass 2.6.6
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOSCSIBlockCommandsDevice 2.6.8
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.8
com.apple.iokit.IOUSBFamily 4.2.2
com.apple.driver.DiskImages 289
com.apple.iokit.IOStorageFamily 1.6.3
com.apple.driver.AppleACPIPlatform 1.3.6
com.apple.iokit.IOPCIFamily 2.6.3
com.apple.iokit.IOACPIFamily 1.3.0
Model: MacBookPro8,1, BootROM MBP81.0047.B0E, 2 processors, Intel Core i7, 2.7 GHz, 8 GB, SMC 1.68f96
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 512 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 5.100.198.104.3)
Bluetooth: Version 2.4.5f1, 2 service, 19 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: TOSHIBA MK7559GSXF, 698,64 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: FaceTime HD Camera (Built-in), 0x05ac (Apple Inc.), 0x8509, 0xfa200000 / 3
USB Device: Hub, 0x0424 (SMSC), 0x2513, 0xfa100000 / 2
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 5
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x821a, 0xfa113000 / 8
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0245, 0xfa120000 / 4
USB Device: Hub, 0x0424 (SMSC), 0x2513, 0xfd100000 / 2
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd110000 / 3I've had a kenerl panic report with the same characteristics as yours
Interval Since Last Panic Report: 12390 sec
Panics Since Last Report: 3
Anonymous UUID: D4ED497D-32FE-415C-A4AF-2E5D1832321A
Wed Jun 29 22:42:18 2011
panic(cpu 4 caller 0xffffff80002d1208): Kernel trap at 0xffffff800021764b, type 13=general protection, registers:
CR0: 0x000000008001003b, CR2: 0x0000000005c92000, CR3: 0x000000007afea000, CR4: 0x0000000000040660
RAX: 0xffffff800d20d628, RBX: 0x000000000000000e, RCX: 0x0000000005c92000, RDX: 0xffffff809300ba08
RSP: 0xffffff809300b970, RBP: 0xffffff809300ba50, RSI: 0xffff008017546ab8, RDI: 0xffffff809300bb78
R8: 0xffffff809300bc20, R9: 0xffffff809300bc00, R10: 0x0000000000000054, R11: 0x0000000000000000
R12: 0x0000000000000003, R13: 0xffffff800d20d5d0, R14: 0x0000000005c92000, R15: 0x0000000000000000
RFL: 0x0000000000010287, RIP: 0xffffff800021764b, CS: 0x0000000000000008, SS: 0x0000000000000010
Error code: 0x0000000000000000
Backtrace (CPU 4), Frame : Return Address
0xffffff809300b610 : 0xffffff8000204d15
0xffffff809300b710 : 0xffffff80002d1208
0xffffff809300b860 : 0xffffff80002e3f4a
0xffffff809300b870 : 0xffffff800021764b
0xffffff809300ba50 : 0xffffff8000213f1d
0xffffff809300bc60 : 0xffffff80002d0f1e
0xffffff809300bdb0 : 0xffffff80002e3f4a
0xffffff809300bdc0 : 0xffffff80002c8589
0xffffff809300bf60 : 0xffffff800026f1dd
0xffffff809300bf80 : 0xffffff80002742d1
0xffffff809300bfa0 : 0xffffff80002c8527
BSD process name corresponding to current thread: SC2
Mac OS version:
10K540
Kernel version:
Darwin Kernel Version 10.8.0: Tue Jun 7 16:32:41 PDT 2011; root:xnu-1504.15.3~1/RELEASE_X86_64
System model name: MacBookPro8,2 (Mac-94245A3940C91C80)
System uptime in nanoseconds: 902385741897
unloaded kexts:
com.apple.driver.AppleUSBUHCI 4.2.0 (addr 0xffffff7f80963000, size 0x65536) - last unloaded 165246783503
loaded kexts:
com.apple.filesystems.autofs 2.1.0 - last loaded 38484435586
com.apple.driver.AGPM 100.12.31
com.apple.driver.AppleHWSensor 1.9.3d0
com.apple.driver.AudioAUUC 1.57
com.apple.driver.AppleUpstreamUserClient 3.5.7
com.apple.driver.AppleMikeyHIDDriver 1.2.0
com.apple.driver.AppleMCCSControl 1.0.20
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleMikeyDriver 2.0.5f13
com.apple.kext.ATIFramebuffer 6.3.6
com.apple.driver.AppleIntelHDGraphics 6.3.6
com.apple.driver.AppleHDA 2.0.5f13
com.apple.driver.AudioIPCDriver 1.1.6
com.apple.ATIRadeonX3000 6.3.6
com.apple.driver.SMCMotionSensor 3.0.1d2
com.apple.iokit.AppleBCM5701Ethernet 3.0.5b8
com.apple.driver.AppleGraphicsControl 2.10.6
com.apple.driver.AirPort.Brcm4331 433.11.5
com.apple.driver.ACPI_SMC_PlatformPlugin 4.7.0a1
com.apple.driver.AppleLPC 1.5.1
com.apple.kext.AppleSMCLMU 1.5.2d10
com.apple.driver.AppleIntelSNBGraphicsFB 6.3.6
com.apple.driver.AppleUSBTCButtons 201.6
com.apple.driver.AppleUSBTCKeyboard 201.6
com.apple.driver.AppleIRController 303.8
com.apple.iokit.SCSITaskUserClient 2.6.8
com.apple.iokit.IOAHCIBlockStorage 1.6.4
com.apple.driver.AppleUSBHub 4.2.4
com.apple.driver.AppleSDXC 1.0.3
com.apple.BootCache 31.1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.driver.AppleUSBEHCI 4.2.4
com.apple.driver.AppleEFINVRAM 1.4.0
com.apple.driver.AppleSmartBatteryManager 160.0.0
com.apple.driver.AppleFWOHCI 4.7.3
com.apple.driver.AppleAHCIPort 2.1.7
com.apple.driver.AppleRTC 1.3.1
com.apple.driver.AppleACPIButtons 1.3.6
com.apple.driver.AppleHPET 1.5
com.apple.driver.AppleSMBIOS 1.7
com.apple.driver.AppleACPIEC 1.3.6
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 142.6.0
com.apple.security.sandbox 1
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.12
com.apple.driver.AppleIntelCPUPowerManagement 142.6.0
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.iokit.IOSurface 74.2
com.apple.iokit.IOBluetoothSerialManager 2.4.5f3
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.driver.DspFuncLib 2.0.5f13
com.apple.iokit.IOAudioFamily 1.8.3fc2
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.iokit.AppleProfileFamily 41
com.apple.driver.AppleHDAController 2.0.5f13
com.apple.iokit.IOHDAFamily 2.0.5f13
com.apple.iokit.IO80211Family 320.1
com.apple.iokit.IONetworkingFamily 1.10
com.apple.driver.IOPlatformPluginFamily 4.7.0a1
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleBacklightExpert 1.0.1
com.apple.iokit.IONDRVSupport 2.2
com.apple.driver.AppleSMC 3.1.0d5
com.apple.kext.ATI6000Controller 6.3.6
com.apple.kext.ATISupport 6.3.6
com.apple.iokit.IOGraphicsFamily 2.2
com.apple.driver.AppleThunderboltDPOutAdapter 1.3.2
com.apple.driver.AppleThunderboltDPInAdapter 1.3.2
com.apple.driver.AppleThunderboltDPAdapterFamily 1.3.2
com.apple.driver.AppleThunderboltPCIDownAdapter 1.1.6
com.apple.driver.BroadcomUSBBluetoothHCIController 2.4.5f3
com.apple.driver.AppleUSBBluetoothHCIController 2.4.5f3
com.apple.iokit.IOBluetoothFamily 2.4.5f3
com.apple.driver.AppleUSBMultitouch 207.7
com.apple.iokit.IOUSBHIDDriver 4.2.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.8
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6.1
com.apple.driver.AppleUSBMergeNub 4.2.4
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IOAHCISerialATAPI 1.2.6
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.8
com.apple.driver.AppleThunderboltNHI 1.2.6
com.apple.iokit.IOThunderboltFamily 1.4.9
com.apple.iokit.IOUSBUserClient 4.2.4
com.apple.iokit.IOFireWireFamily 4.2.6
com.apple.iokit.IOAHCIFamily 2.0.6
com.apple.iokit.IOUSBFamily 4.2.4
com.apple.driver.AppleEFIRuntime 1.4.0
com.apple.iokit.IOHIDFamily 1.6.6
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.TMSafetyNet 6
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 289.1
com.apple.iokit.IOStorageFamily 1.6.3
com.apple.driver.AppleACPIPlatform 1.3.6
com.apple.iokit.IOPCIFamily 2.6.5
com.apple.iokit.IOACPIFamily 1.3.0
Model: MacBookPro8,2, BootROM MBP81.0047.B0E, 4 processors, Intel Core i7, 2.2 GHz, 4 GB, SMC 1.69f1
Graphics: AMD Radeon HD 6750M, AMD Radeon HD 6750M, PCIe, 1024 MB
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 5.100.198.104.5)
Bluetooth: Version 2.4.5f3, 2 service, 12 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: TOSHIBA MK7559GSXF, 698.64 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: FaceTime HD Camera (Built-in), 0x05ac (Apple Inc.), 0x8509, 0xfa200000 / 3
USB Device: Hub, 0x0424 (SMSC), 0x2513, 0xfa100000 / 2
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 5
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x821a, 0xfa113000 / 8
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0246, 0xfa120000 / 4
USB Device: Hub, 0x0424 (SMSC), 0x2513, 0xfd100000 / 2
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd110000 / 3
It looks like it is the USB in both our cases -
Need help with the following error message...
I just got a Shuffle for Christmas and was trying to download iTunes when I got the following message. FYI - I have a PC and the operating system is Windows XP:
iTunesSetup[1].exe is not a valid Win32 application
Anyone received this message before? I've looked around the troubleshooting section but am at a loss as to what to do from here...
ThxI do have SR but hoping i can get quicker answer hereYou may always escalate the SR if you are not getting response timely. Anyways, give the reference of this thread in the SR and ask service engineer to file a bug.
I will email you the wire messageI saw the wire message you mailed across. There are some junk characters in the starting of the payload and that's why parsing is failing. Most probably it is a BOM (Byte Order Mark). Ask your TP to send messages in UTF-8 encoding without BOM or any other junk character in the starting of the message. You may open the wire message payload you mailed across in notepad or textpad and you will able to see those junk characters in the starting of the payload.
Regards,
Anuj -
Need help with the following.
Hi everybody..,
can anyone plz check the following code and tell that how to end the exception after "raise form_trigger_failure and end if;"
thanks in advance.
DECLARE
v_amount number(15,2);
v_old_amount number(15,2);
f_number varchar2(10);
BEGIN
select amount into v_old_amount
from pur_req
where line_number = :line_number and
f_number = :f_number;
EXCEPTION
WHEN no_data_found then
select allocated_amount into v_amount
from line_description
where line_number = :line_number;
IF :amount <= v_amount then
update line_description
set allocated_amount = allocated_amount - :amount;
commit;
else
message('The Remaining budget is '||V_AMOUNT||' So, the transaction cant be completed');
message(' ');
raise form_trigger_failure;
end if;
-------------------------here
if :amount < v_old_amount then
update line_description
set allocated_amount = allocated_amount + (v_old_amount - :amount)
where line_number = :line_number and
f_number = :f_number;
else
:amount > v_old_amount then
update line_description
set allocated_amount = allocated_amount - (:amount - v_old_amount)
where line_number = :line_number
and f_number = :f_number;
end if;
END;around line 36 IF and END IF are missing:
DECLARE
v_amount NUMBER (15, 2);
v_old_amount NUMBER (15, 2);
f_number VARCHAR2 (10);
BEGIN
SELECT amount
INTO v_old_amount
FROM pur_req
WHERE line_number = :line_number AND f_number = :f_number;
EXCEPTION
WHEN NO_DATA_FOUND
THEN
SELECT allocated_amount
INTO v_amount
FROM line_description
WHERE line_number = :line_number;
IF :amount <= v_amount
THEN
UPDATE line_description
SET allocated_amount = allocated_amount - :amount;
COMMIT;
ELSE
MESSAGE (
'The Remaining budget is '
|| v_amount
|| ' So, the transaction cant be completed');
MESSAGE (' ');
RAISE form_trigger_failure;
END IF;
IF :amount < v_old_amount
THEN
UPDATE line_description
SET allocated_amount =
allocated_amount + (v_old_amount - :amount)
WHERE line_number = :line_number AND f_number = :f_number;
ELSE
-- IF missing:
IF :amount > v_old_amount
THEN
UPDATE line_description
SET allocated_amount =
allocated_amount - (:amount - v_old_amount)
WHERE line_number = :line_number AND f_number = :f_number;
-- END IF missing:
END IF;
END IF;
END;btw what if this
SELECT allocated_amount
INTO v_amount
FROM line_description
WHERE line_number = :line_number;also raises a no_data_found exception? you should close the first exception block and open another:
SELECT amount
INTO v_old_amount
FROM pur_req
WHERE line_number = :line_number AND f_number = :f_number;
EXCEPTION
WHEN NO_DATA_FOUND
THEN
v_old_amount := NULL;
END;
BEGIN
IF v_old_amount IS NULL THEN
SELECT allocated_amount
INTO v_amount
FROM line_description
EXCEPTION
WHEN NO_DATA_FOUND THEN
END;Edited by: jowal on 20.04.2011 14:32 -
Need help with the following console messages...
Hello,
I wanted to know what these messages mean in the Console app. I've had two of these system errors in a row and I would like to know that they mean. They seem to be related to the GPU, and manifest by showing a color spinwheel followed by a complete system crash.
What do you think?
1/13/12 12:06:33.246 AM sandboxd: ([108]) DumpGPURestart(108) deny file-write-create /Library/Application Support/SubmitDiagInfo
1/13/12 12:06:33.288 AM sandboxd: ([108]) DumpGPURestart(108) deny ipc-posix-shm apple.shm.notification_center
1/13/12 12:06:33.289 AM sandboxd: ([108]) DumpGPURestart(108) deny ipc-posix-shm apple.shm.notification_center
1/13/12 12:06:33.290 AM sandboxd: ([108]) DumpGPURestart(108) deny ipc-posix-shm apple.shm.notification_center
1/13/12 12:06:33.291 AM sandboxd: ([108]) DumpGPURestart(108) deny ipc-posix-shm apple.shm.notification_center
1/13/12 12:06:33.304 AM sandboxd: ([108]) DumpGPURestart(108) deny ipc-posix-shm apple.shm.notification_center
1/13/12 12:06:33.322 AM sandboxd: ([108]) DumpGPURestart(108) deny ipc-posix-shm apple.shm.notification_center
1/13/12 12:06:33.323 AM sandboxd: ([108]) DumpGPURestart(108) deny network-outbound /private/var/run/mDNSResponder
1/13/12 12:06:33.324 AM sandboxd: ([108]) DumpGPURestart(108) deny file-read-data /private/etc/hosts
1/13/12 12:06:33.325 AM sandboxd: ([108]) DumpGPURestart(108) deny file-read-data /private/etc/hosts
1/13/12 12:06:33.343 AM sandboxd: ([108]) DumpGPURestart(108) deny ipc-posix-shm apple.shm.notification_center
1/13/12 12:06:33.345 AM sandboxd: ([108]) DumpGPURestart(108) deny ipc-posix-shm apple.shm.notification_center
1/15/12 8:34:16.596 PM sandboxd: ([128]) DumpGPURestart(128) deny file-write-create /Library/Application Support/SubmitDiagInfo
1/15/12 8:34:16.638 PM sandboxd: ([128]) DumpGPURestart(128) deny ipc-posix-shm apple.shm.notification_center
1/15/12 8:34:16.645 PM sandboxd: ([128]) DumpGPURestart(128) deny ipc-posix-shm apple.shm.notification_center
1/15/12 8:34:16.647 PM sandboxd: ([128]) DumpGPURestart(128) deny ipc-posix-shm apple.shm.notification_center
1/15/12 8:34:16.648 PM sandboxd: ([128]) DumpGPURestart(128) deny ipc-posix-shm apple.shm.notification_center
1/15/12 8:34:16.649 PM sandboxd: ([128]) DumpGPURestart(128) deny ipc-posix-shm apple.shm.notification_center
1/15/12 8:34:16.665 PM sandboxd: ([128]) DumpGPURestart(128) deny ipc-posix-shm apple.shm.notification_center
1/15/12 8:34:16.667 PM sandboxd: ([128]) DumpGPURestart(128) deny network-outbound /private/var/run/mDNSResponder
1/15/12 8:34:16.667 PM sandboxd: ([128]) DumpGPURestart(128) deny file-read-data /private/etc/hosts
1/15/12 8:34:16.668 PM sandboxd: ([128]) DumpGPURestart(128) deny file-read-data /private/etc/hosts
1/15/12 8:34:16.685 PM sandboxd: ([128]) DumpGPURestart(128) deny ipc-posix-shm apple.shm.notification_center
1/15/12 8:34:16.686 PM sandboxd: ([128]) DumpGPURestart(128) deny ipc-posix-shm apple.shm.notification_center
1/15/12 9:09:26.511 PM sandboxd: ([333]) DumpGPURestart(333) deny file-write-create /Library/Application Support/SubmitDiagInfo
1/15/12 9:09:26.534 PM sandboxd: ([333]) DumpGPURestart(333) deny ipc-posix-shm apple.shm.notification_center
1/15/12 9:09:26.536 PM sandboxd: ([333]) DumpGPURestart(333) deny ipc-posix-shm apple.shm.notification_center
1/15/12 9:09:26.537 PM sandboxd: ([333]) DumpGPURestart(333) deny ipc-posix-shm apple.shm.notification_center
1/15/12 9:09:26.539 PM sandboxd: ([333]) DumpGPURestart(333) deny ipc-posix-shm apple.shm.notification_center
1/15/12 9:09:26.541 PM sandboxd: ([333]) DumpGPURestart(333) deny ipc-posix-shm apple.shm.notification_center
1/15/12 9:11:30.625 PM com.apple.stackshot: Running fs_usage, spindump and top
I know that my MacBook Pro is the one that has the 330m GPU that has given some problems under Mac OS X Lion. Would like to know if this can be related to the OSX Lion graphics issues in the 2010 MacBook Pros.Bump. Any suggestions or ideas? I really need them.
-
I need help with the following: "IPS attack"
What actions should I take after receiving messages from different websites denying access due to an "IPS attack" from my MacBook Pro???
No one can tell for certain that your computer is infected or damaged from outside your computer.
Anyone telling you that is scamming you or trying to scare you into buying something you don't need.
If your computer is really going nuts, your ISP will shut off your Internet connection in a Heartbeat. -
Need help with the Following SP
It will be great if someone can test this code. It used to work fine but after a i added a couple of SP its does not do what its supposed to. It is supposed to check if the item is discontinued and in stock. If its discontinued and not in stock it should not allow the user to add the order but it only checks for discontiuned item for some reason.
If (@Object_Type='17') and (@Transaction_Type='A'or @Transaction_Type='U')
Begin
If exists (Select T1.LineNum from RDR1 T1 INNER JOIN ORDR T0 ON
T0.DocENtry = T1.DocEntry inner join OITM t2 on t1.itemcode=t2.itemcode
inner join OitW T3 on T1.itemcode=t3.itemcode where T1.linestatus='o' AND t2.InvntItem='y'
and t2.U_discontinuedDate is not null AND T0.DocEntry= @list_of_cols_val_tab_del
GROUP BY T1.LineNum
HAVING (SUM(T3.OnHand)+SUM(T3.OnOrder)-SUM(T3.IsCommited) )<= 0 )
Begin
set @Error='1001'
Set @error_message='An Item on this order has been discontinued '
End
End
Thank You
ChintanChintan,
You may run the query under query manager to select any documents to see. I am sure the condition meet your SP on the sales order will get listed. If no result, that means your SP is still working.
Thanks,
Gordon -
Need help with Set-ADUser command
I need a little help with the following command. Im new to PS and I have found this command but it is only one user at a time. I need to be able to update ALL users in AD.
My goal is this. Someone before me set all Users Home numbers to 1234567899 and I need to remove that and leave it blank. The command below allows me to do that but only one user at a time by entering their SAMID.
Is there a way to do this for everyone in AD ?
Set-AdUser –Identity SAMID –HomePhone $NULLYeah sure -
Get-Aduser -filter * -properties SamaccountName | Select SamAccountName | % {Set-Aduser -identity $_.SamaccountName -HomePhone $null} -
I need help with the Quote applet.
Hey all,
I need help with the Quote applet. I downloaded it and encoded it in the following html code:
<html>
<head>
<title>Part 2</title>
</head>
<body>
<applet codebase="/demo/quote/classes" code="/demo/quote/JavaQuote.class"
width="300" height="125" >
<param name="bgcolor" value="ffffff">
<param name="bheight" value="10">
<param name="bwidth" value="10">
<param name="delay" value="1000">
<param name="fontname" value="TimesRoman">
<param name="fontsize" value="14">
<param name="link" value="http://java.sun.com/events/jibe/index.html">
<param name="number" value="3">
<param name="quote0" value="Living next to you is in some ways like sleeping with an elephant. No matter how friendly and even-tempered is the beast, one is affected by every twitch and grunt.|- Pierre Elliot Trudeau|000000|ffffff|7">
<param name="quote1" value="Simplicity is key. Our customers need no special technology to enjoy our services. Because of Java, just about the entire world can come to PlayStar.|- PlayStar Corporation|000000|ffffff|7">
<param name="quote2" value="The ubiquity of the Internet is virtually wasted without a platform which allows applications to utilize the reach of Internet to write ubiquitous applications! That's where Java comes into the picture for us.|- NetAccent|000000|ffffff|7">
<param name="space" value="20">
</applet>
</body>
</html>When I previewed it in Netscape Navigator, a box with a red X appeared, and this appeared in the console when I opened it:
load: class /demo/quote/JavaQuote.class not found.
java.lang.ClassNotFoundException: .demo.quote.JavaQuote.class
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadCode(Unknown Source)
at sun.applet.AppletPanel.createApplet(Unknown Source)
at sun.plugin.AppletViewer.createApplet(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: java.io.FileNotFoundException: \demo\quote\JavaQuote\class.class (The system cannot find the path specified)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(Unknown Source)
at java.io.FileInputStream.<init>(Unknown Source)
at sun.net.www.protocol.file.FileURLConnection.connect(Unknown Source)
at sun.net.www.protocol.file.FileURLConnection.getInputStream(Unknown Source)
at sun.applet.AppletClassLoader.getBytes(Unknown Source)
at sun.applet.AppletClassLoader.access$100(Unknown Source)
at sun.applet.AppletClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
... 10 more
Exception in thread "Thread-4" java.lang.NullPointerException
at sun.plugin.util.GrayBoxPainter.showLoadingError(Unknown Source)
at sun.plugin.AppletViewer.showAppletException(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
java.lang.NullPointerException
at sun.plugin.util.GrayBoxPainter.showLoadingError(Unknown Source)
at sun.plugin.AppletViewer.showAppletStatus(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)What went wrong? and how can I make it run correct?
Thanks,
Nathan PinnoJavaQuote.class is not where your HTML says it is. That is at the relative URL "/demo/quote/".
Maybe you are looking for
-
Okay I have windows 7 now, no matter how i fought the change it was inevidable .. I was suppose to be Windows Ultimate but I can't the ULTIMATE part to to work... Here's my problem as you cans see from the photos above that i had to uninstall CS3 , U
-
File/ftp adapters in SOA Suite (BPEL/ESB) 10.1.3.x
Questions below are relative to SOA Suite 10.1.3.3 adapters: 1. In creating a File Read/Write adapter - how can I specify a variable portion of the file name - can XPath expressions be used. I know that in specifing the file name one uses a %---% but
-
How to set focus and mark red on certain select option field
hi experts I embedded a select_option view in my application and tried to use IF_WD_SELECT_OPTIONS->request_focus to set focus on a certain select option field if the logical check failed, and also hope the low field of the select option can be mark
-
Object oriented and structured paradigms
Hi, I'm trying to find information which compares the OO and structured paradigms, but im finding it to find any information on google. I was wondering if there is another name for structured programming? Is imperative or functional programming the s
-
.flv with command at the end
Hey there, I have created a SWF file that streams an FLV file. What I would like to do, is have an actionscript command activate AFTER the FLV has played to the end of the movie. Is there a code for something like this?