I NEED HELP WITH THE SCREEN SAVER FOR MY 40GB ZEN X

Ok heres the deal, I just found out that i can put a bitmap image on my mp3 player for the shut down screen my question is...
Can I have a bitmap image for the start up screen as well? and if so how do i go about doing that?
My Screen Saver question is as follows, Is their any way to get a differant screen saver other than the 2 that are on it already? could I have a bitmap image for the screen saver?
~Please Respond~

Try this link
http://support.apple.com/kb/HT4527

Similar Messages

  • Need help with Leopard: screen saver glitch and very slow internet

    I performed an erase and install leopard 10.5.1 on my upgraded G4 AGP Sawtooth Computer several times. Has anyone had the following 2 problems with leopard and any suggestions to solve them? Apple telephone support has not helped thus far. The Issues include:
    1-Internet surfing (Safari and Firefox) is extremely slow worse than dial-up. I have verizon fios. Upgrading leopard to 10.5.3 and upgrading Safari did not help and took about 10 hours to download when it should have been quick.
    2- A screen saver glitch: When I click on screen saver such as beach I get this message. " Screen saver "beach" did not load properly. Error Can't load bundle" When I click on the screen savers folder, there is nothing in it. Desktop pictures work fine.
    Computer upgrades include:
    Processor-OWC Mercury Extreme [email protected] 2MB L3 Cache
    2GB memory
    Two 120GB hardrives.
    Firmware is updated.
    Thus far, all this was done:
    Apple exchanged install disk. Same results with new disk.
    I ran disk utility and everything is ok including permissions.
    I performed a safe boot with apple support.
    I Threw away cache folder and com.apple.safari.plist
    Tried firefox with same very slow surfing results.
    I even checked file system structure problem fsck -yf. Everything was ok
    Thanks in advance for any suggestions.

    Althought the behavior is the same in all three accounts, if all are working accounts I would suspect there is something all of them have installed that could be the source of the problem. Try creating a new admin account, and leave it just the way Apple creates it--don't add anything nor modify it in any way. Log into that account and see if it works correctly.
    If that account is also misbehaving, try restarting, and when you hear the chime hold down the Shift key so that you boot into Safe Mode (you'll see a notice in the splash screen about being in Safe Mode). The boot will take longer (perhaps even considerably longer) as the system runs disk repair, empties some caches, disables all third party startup items, as well as all Apple startup items not strictly necessary for the machine to run. See the menus and Dock now behave correctly.
    Since the problem is evidently somewhat intermittent in nature it may take some patience to discover what is wrong. You might also disconnect everything that didn't come with the Mac, reboot, and use only the Apple keyboard and Apple mouse and run for a bit to see how that works. If you are using a third party mouse that required installing something that would be my guess as a "prime suspect" for the cause of the problems.
    Francine
    Francine
    Schwieder

  • I need help with the VPAID library for OSMF

    Hello,
    I recently needed to create a VPAID based player for a client and I want it to get rid of the old JWPlayer/OVA approaching and go for the OSMF with VAST/VPAID libaries. The fact is that I tried to use your sample application from SVN files (VPAIDSample) but for some reason the LinearAD is played in the same time with the video clip (the clip to play) and is not visible. Also I can only hear the sound of it and at some point the sound from the LinearAD is played over the sound of the video clip. I don't know if I was specific enough but please let me know if you have a sollution on this matter or if you need any other information.
    Regards,
             Marius Constantin.

    Hi Marius,
    I think this problem could be linked to the changes in the layout API and the order of the loading of the video elements.
    Please try to add layoutmetadata with index property to parallel videos so they render in the correct order, something like:
                var layout1:LayoutMetadata = new LayoutMetadata();
                layout1.index= 10 ;
                videoElement.addMetadata(LayoutMetadata.LAYOUT_NAMESPACE, layout1);
                var layout2:LayoutMetadata = new LayoutMetadata();
                 layout2.index= 20 ;
                 vpaidNonLinear.addMetadata(LayoutMetadata.LAYOUT_NAMESPACE, layout2);
    Tell me if that worked,
    S.

  • I need help with the best option for backup of itunes for laptop change?

    i want to change my itunes account from my existing laptop to my new laptop, whats the best way to back up or transfer my itunes?

    Try this link
    http://support.apple.com/kb/HT4527

  • I am using system 10.8.2 and have an issue with the screen saver not filling the screen. the desktop does, but not the screen saver. I find adjustments for the desktop, but not the saver. Would appreciate any suggestions.

    I am using system 10.8.2 and have an issue with the screen saver not filling the screen. the desktop does, but not the screen saver. I find adjustments for the desktop, but not the saver. Would appreciate any suggestions.

    I have a group of my images that rotate, and yes it happens oneach. I do believethat I have at one time had the images cover the entire screen, however I cannor remember how I made that happen, just like the desktop. I am sure it is old'ites setting in!

  • I still need help with the Dictionary for my Nokia...

    I still need help with the Dictionary for my Nokia 6680...
    Here's the error message I get when trying to open dictionary...
    "Dictionary word information missing. Install word database."
    Can someone please provide me a link the where I could download this dictionary for free?
    Thanks!
    DON'T HIT KIDS... THEY HAVE GUNS NOW.

    oops, im sorry, i didnt realised i've already submitted it
    DON'T HIT KIDS... THEY HAVE GUNS NOW.

  • I think I need help with driver (software) settings for D110a

    I think I need help with driver (software) settings for D110a all-in-one
    Product: D110a all-in-one
    OS: Windows XP Professional
    Error messages: None
    Changes before problem appeared: None--new installation
    The quality of photo images (mostly JPG files) in printouts is awful even though the files display beautifully on the PC screen. I am using
    IrfanView software for displaying/printing. As far as I can tell, IrfanView is not the problem.
    When I print the same images on a Deskjet 5150 attached to a different PC also running XP Pro and IrfanView, the quality of the printouts is at
    least acceptable, Some would probably say good or very good.
    It's dificult to explain in words the problem with the printouts. A picture of really pretty vegetables (squashes, tomatoes, watermelon, etc) comes
    out much too red. Moreover, the red, which appears shaded on the screen, seems to be all one shade in the D110a printouts.
    Something similar happens to a view of a huge tree in full leaf. On screen, there are subtle variations in the "greenness" of the leaves. In the
    printout, all green is the same shade. In the same printout, the trunk of the tree is all a single shade of grey. It isn;t even obvious that the
    trunk is a round, solid object.
    I liken the effect to audio that disappears entirely when you lower the volume and gets clipped into square waves in even moderately loud passages.
    I don't know whether the D110a driver software permits adjusting the parameters that appear to be set incorrectly, and if adjustments are possible,
    how I would identify which parameters to adjust, how I would access them, or how I would adjust them. I'm hoping that someone can help. Thanks.
    I forgot to mention that I have used the diagnostic application and it tells me that there are no problems.
    e-mail me at [email protected]

    brazzmonkey wrote:
    Hi everyone,
    I noticed the following message when network starts on my gateway
    Warning: This functionality is deprecated.
    Please refer to /etc/rc.conf on how to define a single wired
    connection, or use a utility such as netcfg.
    Then I realized the way network settings should be written in rc.conf has changed. But I can't figure out how this should be done.
    Currently, my set up is the following (old way):
    INTERFACES=(eth0 eth1)
    eth0="dhcp"
    eth1="eth1 192.168.0.10 netmask 255.255.255.0 broadcast 192.168.0.255"
    ROUTES=(!gateway)
    eth0 is on DHCP because the IP is dynamically assigned my ISP.
    eth1 has a fix IP because it's on the LAN side.
    No problem to use DHCP on eth0 with the new settings.
    But for eth1, I don't know what I am supposed to write for gateway.
    Wiki isn't clear on that one either, and it looks like many articles still refer to the old way.
    Any guidance appreciated, thanks.
    brazzmonkey,
    you can't define 2 interfaces the old way (even though I saw some tricky workaround somewhere in the forums).
    Use, f.e., netcfg:
    Comment your old lines.
    In /etc/rc.conf insert:
    NETWORKS=(Eth0-dhcp Eth1-static)
    DAEMONS=(..... !network @net-profiles ....)
    In /etc/network.d create 2 files:
    First one is named  Eth0-dhcp.
    Contents:
    CONNECTION="ethernet"
    DESCRIPTION="Whatever text"
    INTERFACE=eth0
    HOSTNAME="your hostname"
    IP="dhcp"
    DHCP_TIMEOUT=15
    Second one is named Eth1-static.
    Contents:
    CONNECTION='ethernet'
    DESCRIPTION='whatver'
    INTERFACE='eth1'
    HOSTNAME='hname'
    IP='static'
    ADDR='192.168.0.10'
    GATEWAY='192.168.0.1' # your gateway IP
    DNS=('192.168.0.1') # your DNS server
    The names Eth0-dhcp and Eth1-static are not magic. They just must be the same in rc.conf and in /etc/network.d.
    Hope it helps.
    mektub
    PS: netcfg must be installed.
    Last edited by Mektub (2011-07-20 14:07:05)

  • I need Help with the dynamic link feature in CS3

    Hi I was wondering if anyone could help me with an issue I am having? I have the adobe cs3 master collection. Having watched tutorials on the dynamic link feature my version seems not to have the same options as those I have viewed. I wish to send my premiere video creation to encore using dynamic link, however when I click "file" and then "adobe dynamic link" the only options available are about "adobe after effects". I can export to encore however I am only alloowed to export one premiere sequence to one new encore file, I cannot create an encore file and import several premiere sequence into the same encore project. That means currently I can only have an encore creation with one premiere sequence in it, and I have no adobe dynamic link. Any help anyone could offer would be greatly appreciated.

    Thanks very much for that guys but my premiere media encoder only lets me export as: MPEG1, MPEG1-VCD, MPEG2, MPEG2 blu-ray, MPEG2-DVD, MPEG2-SVCD, H.264, H.264 blu-ray, Adobe Flash Video, Quicktime, Real Media, Windows Media. Are any of these formats DV AVI?
    Am I to export my videos direct to encore or save them elsewhere (e.g desktop). It seems that I cannot export sequences from different premiere projects to the same encore project.
    Sorry if any of these questions seem obvious, I am just new to premiere and keen to do things right from the off.
    Many thanks again guys.
    Date: Tue, 24 Nov 2009 19:32:47 -0700
    From: [email protected]
    To: [email protected]
    Subject: I need Help with the dynamic link feature in CS3
    Harm is correct.  For SD DVD, exporting as a DV AVI file from Pr will give you good results.  Encore's Automatic Transcoding will give you maximum quality for the available disc space.
    -Jeff
    >

  • Need help with the Vibrance adjustment in Photoshop CC 2014.

    Need help with the Vibrance adjustment in Photoshop CC 2014.
    Anytime I select Vibrance to adjust the color of an image. The whole image turns Pink in the highlights when the slider is moved from "0" to - or + in value.  Can the Vibrance tool be reset to prevent this from happening? When this happens I cn not make adjustments...just turns Pink.
    Thanks,
    GD

    Thank you for your reply. 
    Yes, that does reset to “0” and the Pink does disappear.
    But as soon as I move the slider +1 or -1 or higher the image turns Pink in all of the highlights again, rather than adjusting the overall color.
    GD
    Guy Diehl  web: www.guydiehl.com | email: [email protected]

  • I need help with the photo stream. Everytime I try to open it on my PC it says photo stream is unable and I have tried everuthing to enable it but it doesn't work. Any help, please?

    I need help with the photo stream. Everytime I try to open it on my PC it says photo stream is unable and I have tried everuthing to enable it but it doesn't work. Any help, please?

    Freezing, or crashing?
    ID on the Mac can produce reports that may (or may not) prove helpful in diagnosing the problem. I suspect this is something not directly related to InDesign, and maybe not to any of the Adobe apps directly since you seem to be having a problem in more than one. That often inidcates a problem at the system level.
    Nevertheless, it won't hurt to try to gather the reports. You'll find driections for how to generate them, and to post them on Pastebin.com (then put a link to them here) so we can see what's going on at Adobe Forums: InDesign CS5.5 Not Responding
    Do you happen to run a font manager? If so, which one, and waht version?

  • Need help with a activation code for Adobe Acrobat X Standard for my PC,, Don't have older version serial numbers,  threw programs away,  only have Adobe Acrobat X Standard,  need a code to unlock program?

    Need help with a activation code for Adobe Acrobat X Standard for my PC, Don't have older Version of Adobe Acrobat 9, 8 or 7. 

    You don't need to install the older version, you only need the serial number from your original purchase. If you don't have them to hand, did you register? If so, they should be in your Adobe account. If not you really need to contact Adobe, though it isn't clear they will be able to do anything without some proof of purchase etc.

  • Need help with the session state value items.

    I need help with the session state value items.
    Trigger is created (on After delete, insert action) on table A.
    When insert in table B at least one row, then trigger update value to 'Y'
    in table A.
    When delete all rows from a table B,, then trigger update value to 'N'
    in table A.
    In detail report changes are visible, but the trigger replacement value is not set in session value.
    How can I implement this?

    You'll have to create a process which runs after your database update process that does a query and loads the result into your page item.
    For example
    SELECT YN_COLUMN
    FROM My_TABLE
    INTO My_Page_Item
    WHERE Key_value = My_Page_Item_Holding_Key_ValueThe DML process will only return key values after updating, such as an ID primary key updated by a sequence in a trigger.
    If the value is showing in a report, make sure the report refreshes on reload of the page.
    Edited by: Bob37 on Dec 6, 2011 10:36 AM

  • I need help with the Quote applet.

    Hey all,
    I need help with the Quote applet. I downloaded it and encoded it in the following html code:
    <html>
    <head>
    <title>Part 2</title>
    </head>
    <body>
    <applet      codebase="/demo/quote/classes" code="/demo/quote/JavaQuote.class"
    width="300" height="125" >
    <param      name="bgcolor"      value="ffffff">
    <param      name="bheight"      value="10">
    <param      name="bwidth"      value="10">
    <param      name="delay"      value="1000">
    <param      name="fontname"      value="TimesRoman">
    <param      name="fontsize"      value="14">
    <param      name="link"      value="http://java.sun.com/events/jibe/index.html">
    <param      name="number"      value="3">
    <param      name="quote0"      value="Living next to you is in some ways like sleeping with an elephant. No matter how friendly and even-tempered is the beast, one is affected by every twitch and grunt.|- Pierre Elliot Trudeau|000000|ffffff|7">
    <param      name="quote1"      value="Simplicity is key. Our customers need no special technology to enjoy our services. Because of Java, just about the entire world can come to PlayStar.|- PlayStar Corporation|000000|ffffff|7">
    <param      name="quote2"      value="The ubiquity of the Internet is virtually wasted without a platform which allows applications to utilize the reach of Internet to write ubiquitous applications! That's where Java comes into the picture for us.|- NetAccent|000000|ffffff|7">
    <param      name="space"      value="20">
    </applet>
    </body>
    </html>When I previewed it in Netscape Navigator, a box with a red X appeared, and this appeared in the console when I opened it:
    load: class /demo/quote/JavaQuote.class not found.
    java.lang.ClassNotFoundException: .demo.quote.JavaQuote.class
         at sun.applet.AppletClassLoader.findClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at sun.applet.AppletClassLoader.loadClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at sun.applet.AppletClassLoader.loadCode(Unknown Source)
         at sun.applet.AppletPanel.createApplet(Unknown Source)
         at sun.plugin.AppletViewer.createApplet(Unknown Source)
         at sun.applet.AppletPanel.runLoader(Unknown Source)
         at sun.applet.AppletPanel.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    Caused by: java.io.FileNotFoundException: \demo\quote\JavaQuote\class.class (The system cannot find the path specified)
         at java.io.FileInputStream.open(Native Method)
         at java.io.FileInputStream.<init>(Unknown Source)
         at java.io.FileInputStream.<init>(Unknown Source)
         at sun.net.www.protocol.file.FileURLConnection.connect(Unknown Source)
         at sun.net.www.protocol.file.FileURLConnection.getInputStream(Unknown Source)
         at sun.applet.AppletClassLoader.getBytes(Unknown Source)
         at sun.applet.AppletClassLoader.access$100(Unknown Source)
         at sun.applet.AppletClassLoader$1.run(Unknown Source)
         at java.security.AccessController.doPrivileged(Native Method)
         ... 10 more
    Exception in thread "Thread-4" java.lang.NullPointerException
         at sun.plugin.util.GrayBoxPainter.showLoadingError(Unknown Source)
         at sun.plugin.AppletViewer.showAppletException(Unknown Source)
         at sun.applet.AppletPanel.runLoader(Unknown Source)
         at sun.applet.AppletPanel.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    java.lang.NullPointerException
         at sun.plugin.util.GrayBoxPainter.showLoadingError(Unknown Source)
         at sun.plugin.AppletViewer.showAppletStatus(Unknown Source)
         at sun.applet.AppletPanel.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)What went wrong? and how can I make it run correct?
    Thanks,
    Nathan Pinno

    JavaQuote.class is not where your HTML says it is. That is at the relative URL "/demo/quote/".

  • I need help with the Web Application Certificate

    Greets,
    The title says it all really. I need help with the Web Application Certificate.
    I've followed the instructions from here:
    https://www.novell.com/documentation....html#b13qz9rn
    I can get as far as item 3.c
    3. Getting Your Certificate Officially Signed
    C. Select the self-signed certificate, then click File > Certification Request > Import CA Reply.
    I can get the certificate in to the Filr appliance but from there I'm stuck.
    Any help much appreciated.

    Originally Posted by bentinker
    Greets,
    The title says it all really. I need help with the Web Application Certificate.
    I've followed the instructions from here:
    https://www.novell.com/documentation....html#b13qz9rn
    I can get as far as item 3.c
    ok when you have you self signed certificate and you requested an official certificate with the corresponding CSR then you just need to go back to the digital certificates console. To import the official certificate, select the self signed certificate, then click File > Certification Request > Import CA Reply. Then a new windows pops out to select the certificate from your trusted authority from your local hard disk. Find the file (.cer worked for me) and click ok. As soon as you do this in the digital certificates console the self signed certificate will change the information that now it is officially signed. Look at the second column and you should see the name of your trusted authority under "issue from"
    I personally had a lot of issues across all platforms. Especially Firefox and Chrome for android. Needed to pack all the root cert, intermediate cert and signed cert into one file and import as CA reply. Not even sure if this is correct now. But at least it works.

  • I need help with downgradeing my ios for my ipod touch 4th gen

    i need help with downgradeing my ios for my ipod touch 4th gen

    As has alwys been the case, you cannot go back.
    Sorry

Maybe you are looking for