I need help with the upgraded version of Garage Band '11. Its totally different.

I am incredibly frustrated with the newest version of Garage Band. I am a choreographer and constantly need to edit music. The work I do is very simple. Just cutting sections of music to make the songs shorter. I have been using Garage Band for years with total ease. I used to be able to just highlight a section of music and click delete. Now all that does is either stretch out all the timing or delete the whole track. I need simple cut edits. PLEASE HELP!!! The help sections do not help at all!

emmiesuz04 wrote:
On the bottom window
editor pane
emmiesuz04 wrote:
I'd click where I'd wat to cut, drag to the right and highlight the section I didnt want
click in the bottom half
emmiesuz04 wrote:
Then drag the next part of the song to the left
click in the top half

Similar Messages

My 1st iMac, need help with the upgrade to Leopard CPU Drop-In DVD

Hello all, my 1st post as a new Apple switcher!
I just received my new iMac 24" today, and I am not sure about the upgrade to Leopard. (Came pre-installed with Tiger, and came with a Leopard CPU Drop-In DVD). I have read about a few issues with the upgrade / re-install process to Leopard, stemming from the rumor that the Leopard CPU Drop-In DVD is not a full version, but an upgrade only.
First of all, obviously I am supposed to put in the "Drop-In DVD" and let it rip, but there are several options to pick from. One of them is upgrade, and another is to erase the hard drive and perform a clean install.
My questions are:
If I perform the erase and install, I have heard that iLife 08 will not be installed. If so, where / how do I reinstall that and any other apps that are left out?
Secondly, in the future, if I need to re-install again, will this "Drop-In DVD" work because Tiger has been removed from the hard drive? Will I just pop in my Tiger disks like the old Windows stuff required?
I plan on just doing the upgrade, but I would like to know what to do in the future if I have to do an erase / install.
Thank you, and the iMac 24" is gorgeous!

Hey, I know what you mean.
I upgraded to Leopard after buying my first mac with Tiger.
I rang customer service and asked how do I install iLife 08 if I do a clean instal,l as when i upgraded my Safari would not play flash, quicktime or open certain websites. Also I had a very long load up period with Blue Screen which bothered me a lot. (I know I am fussy)
Anyway my brother suggested I use Pacifist to get the .pkg files from the Tiger boot disk. He took control of my machine as he has Leopard and did this for me remotely as I am not a wizard like him.
By the way that is a great feature of Leopard.
Anyway this worked for me, only iMovie would not start properly but when I download the updates to iLife 08 they all work perfectly now. Saved my 79 euro as well instead of having to buy again as I think iLife should be supplied on a separate disk, (bad form apple) as they know for many a clean install is likely if they experience serious issues upgrading.
Anyway pacifist http://www.charlessoft.com/ is worth a try if you can't afford to fork out for iLife again like me.
Just make sure you select all the iLife .pkg files and composer files. when it installs if the files are already there just click leave alone and it will install only what it needs. Then run the updates if you have any issues opening any of the programs such as imovie and this should replace any missing files.
I have open and run all the iLife programs and so far so good.

Need help with the latest version of Firefox

I asked this question before, but the answer I got was way too complicated. I keep being asked to upgrade to Firefox 29, and when I do go to do this I get the message "You are on the latest version of Firefox", even though I am on Firefox 24. Please tell me in simple language how to fix this.

Hi Ruben,
I'm sorry my answer wasn't easy to understand. I'll try to simplify it.
There are two reasons why your Firefox is incorrectly reading the useragent (the Firefox version you're on)
1) <code>about:config</code> (hidden website in Firefox) still has the preferences for an old version. There's only one thing to do for this step, Visit the below website and tell me what it says under Browser "User Agent" string:. Here's the site:
*https://jeffersonscher.com/res/jstest.php (credit goes to [https://support.mozilla.org/en-US/user/204 jscher2000])
Example: here's what mine looks like:
*Mozilla/5.0 (X11; Ubuntu; Linux x86_64; rv:29.0) Gecko/20100101 Firefox/29.0
If yours isn't 29 at the end you should do the below steps to reset your prefs to default
# Navigate to <code>about:config</code> via Address Bar
# Click the button that says, <code>"I'll be careful, I promse!"</code>
# At the top of this page, search for <code>general.useragent</code>
# Try to reset the following if they exist (If prefs are bold (user set) then you can right-click that pref and choose Reset.):
* general.useragent.extra.firefox
*general.useragent.extra.productName - where productName can be the name of some third party software (e.g. microsoftdotnet),
*general.useragent.locale
*general.useragent.override
*general.useragent.security
The other thing was to see if you had any user.js file active to initalize prefs when you start Firefox
You can delete a possible user.js file and numbered prefs-##.js files and delete the prefs.js file to reset all prefs to the default value. You can get to the profile folder below:
*Help > Troubleshooting Information > Profile Directory > Show Folder
or
*Go to '''about:support''' and click Show Folder next to Profile Directory.

Need help with the evaluation version of Lightroom CC : the app doesn't launch.

Hello, I have installed the Creative Cloud and Lightroom CC three days ago (version d'essai).
When I try to start Lightroom CC, I get a window with a countdown saying "28 days left", and at the bottom of this window there is a "pursue the evaluation" click button, but when I click on it (to start using Lightroom), nothing happens. I have not been able to launch the app for the last 2 days!
Thanks for your help.

Hi,
Here are some system info : I'm using a LENOVO YOGA 2, Windows 8.1, Intel Core i7, 64 bits.
In fact, the Creative Cloud applications did not unexpectedly revert to trial mode because I did ask for a trial version. At the time, it was the first time I installed Lightroom on my computer (a new computer) and I wanted to test the new Creative Cloud & its applications for photographers (Lightroom 6 and Photoshop).
As I said previously, when I try to launch Lightroom CC, I get a window with a countdown saying "28 days left" (which is ok because I installed the 30-days trial version two days ago). At the bottom of this window, there is a "pursue the evaluation" click button (on which I should click to start the app), but when I click on this button, the windows shots and nothing else happens : Lightroom doesn't open.

I need help with the new version of iMovie.

When I click on iTunes, the message in the browser says "The contents of your iTunes library will appear here". Nothing ever appears in the Browser box! HELP!! Thanks.

I didn't mention ITunes store I want to use songs from my iTunes library with a movie I am putting together in iMovie. I have done this many times before with older versions of iMovie. The contents of my iTunes Library will not load into this iMovie version (10.0.5).
Thanks for your interest..

I need help with the newest version of Adobe. Youtube wil no longer work.

Today I just installed Adobe 10.3 etc. and I can't get Youtube to play videos anymore. I'm not at all a professional, and not that good at computers either. I just want my Youtube to play again. Any help would be appreciated. Thanks.

Try to install adobe shockwave player http://get.adobe.com/shockwave/ it should work

I need help with the install of the upgrade to LR5.

I need assistance with the upgrade install to Lr5. I cannot get past "Destination Select"

The new "OpenH264 Video Codec provided by Cisco Systems, Inc." plugin that now shows up in the Firefox Add-ons Manager Plugins list was added in Firefox 33.0. It's installed in a subfolder of your [[Profiles|Firefox profile folder]], which you can confirm by typing '''about:plugins''' in the Firefox address bar to bring up a list of installed plugins (details [http://kb.mozillazine.org/Issues_related_to_plugins#Identifying_installed_plugins here]) and checking its "Path" entry .
The first link in the [https://www.mozilla.org/en-US/firefox/33.0/releasenotes/ Firefox 33.0 release notes] under What’s New, has this:
'''New''' | [http://andreasgal.com/2014/10/14/openh264-now-in-firefox/ OpenH264 support] * (sandboxed)
[*] Quoted from the linked page, http://andreasgal.com/2014/10/14/openh264-now-in-firefox/
(which also includes a [https://andreasgal.files.wordpress.com/2014/10/openh264.jpg screenshot] of the Add-ons Manager entry):
<blockquote>Today in collaboration with Cisco we are shipping support for H.264 in our WebRTC implementation. </blockquote>
<blockquote>Cisco has agreed to distribute OpenH264, a free H.264 codec plugin that Firefox downloads directly from Cisco.</blockquote>
<blockquote> Note: Firefox currently uses OpenH264 only for WebRTC and not for the <nowiki><video></nowiki> tag, because OpenH264 does not yet support the high profile format frequently used for streaming video. We will reconsider this once support has been added. </blockquote>
See also:
*https://wiki.mozilla.org/Media/WebRTC
*https://wiki.mozilla.org/GeckoMediaPlugins

I need help with the photo stream. Everytime I try to open it on my PC it says photo stream is unable and I have tried everuthing to enable it but it doesn't work. Any help, please?

I need help with the photo stream. Everytime I try to open it on my PC it says photo stream is unable and I have tried everuthing to enable it but it doesn't work. Any help, please?

Freezing, or crashing?
ID on the Mac can produce reports that may (or may not) prove helpful in diagnosing the problem. I suspect this is something not directly related to InDesign, and maybe not to any of the Adobe apps directly since you seem to be having a problem in more than one. That often inidcates a problem at the system level.
Nevertheless, it won't hurt to try to gather the reports. You'll find driections for how to generate them, and to post them on Pastebin.com (then put a link to them here) so we can see what's going on at Adobe Forums: InDesign CS5.5 Not Responding
Do you happen to run a font manager? If so, which one, and waht version?

I need Help with the dynamic link feature in CS3

Hi I was wondering if anyone could help me with an issue I am having? I have the adobe cs3 master collection. Having watched tutorials on the dynamic link feature my version seems not to have the same options as those I have viewed. I wish to send my premiere video creation to encore using dynamic link, however when I click "file" and then "adobe dynamic link" the only options available are about "adobe after effects". I can export to encore however I am only alloowed to export one premiere sequence to one new encore file, I cannot create an encore file and import several premiere sequence into the same encore project. That means currently I can only have an encore creation with one premiere sequence in it, and I have no adobe dynamic link. Any help anyone could offer would be greatly appreciated.

Thanks very much for that guys but my premiere media encoder only lets me export as: MPEG1, MPEG1-VCD, MPEG2, MPEG2 blu-ray, MPEG2-DVD, MPEG2-SVCD, H.264, H.264 blu-ray, Adobe Flash Video, Quicktime, Real Media, Windows Media. Are any of these formats DV AVI?
Am I to export my videos direct to encore or save them elsewhere (e.g desktop). It seems that I cannot export sequences from different premiere projects to the same encore project.
Sorry if any of these questions seem obvious, I am just new to premiere and keen to do things right from the off.
Many thanks again guys.
Date: Tue, 24 Nov 2009 19:32:47 -0700
From: [email protected]
To: [email protected]
Subject: I need Help with the dynamic link feature in CS3
Harm is correct. For SD DVD, exporting as a DV AVI file from Pr will give you good results. Encore's Automatic Transcoding will give you maximum quality for the available disc space.
-Jeff
>

Need help with the Vibrance adjustment in Photoshop CC 2014.

Need help with the Vibrance adjustment in Photoshop CC 2014.
Anytime I select Vibrance to adjust the color of an image. The whole image turns Pink in the highlights when the slider is moved from "0" to - or + in value. Can the Vibrance tool be reset to prevent this from happening? When this happens I cn not make adjustments...just turns Pink.
Thanks,
GD

Thank you for your reply.
Yes, that does reset to “0” and the Pink does disappear.
But as soon as I move the slider +1 or -1 or higher the image turns Pink in all of the highlights again, rather than adjusting the overall color.
GD
Guy Diehl web: www.guydiehl.com | email: [email protected]

I need help with the iPad Remote app to connect to apple TV 2

I need help with the iPad Remote app to connect to apple TV 2 I have the app already on my ipad and when I open it only shows my itunes library and not the small black Apple TV 2 icon! How do i fix this and i know it's something

Get the manual at http://manuals.info.apple.com/en_US/AppleTV_SetupGuide.pdf
 Cheers, Tom

Need help with the session state value items.

I need help with the session state value items.
Trigger is created (on After delete, insert action) on table A.
When insert in table B at least one row, then trigger update value to 'Y'
in table A.
When delete all rows from a table B,, then trigger update value to 'N'
in table A.
In detail report changes are visible, but the trigger replacement value is not set in session value.
How can I implement this?

You'll have to create a process which runs after your database update process that does a query and loads the result into your page item.
For example
SELECT YN_COLUMN
FROM My_TABLE
INTO My_Page_Item
WHERE Key_value = My_Page_Item_Holding_Key_ValueThe DML process will only return key values after updating, such as an ID primary key updated by a sequence in a trigger.
If the value is showing in a report, make sure the report refreshes on reload of the page.
Edited by: Bob37 on Dec 6, 2011 10:36 AM

Need Help with the Clone Tool

I need help with the clone tool, in that when I clone (let's say grass as example), the new cloned area does NOT come out as sharp as the area selected. It comes out much softer and somewhat blurred. I have the opacity and flow both set at 100%. This is very frustrating since I can not get a true clone.

what "tip" do you have selected? where are you sampling from ( found in top option bar) ALSO make sure MODE is normal
http://helpx.adobe.com/photoshop/using/retouching-repairing-images.html
-janelle

I need help with the Quote applet.

Hey all,
I need help with the Quote applet. I downloaded it and encoded it in the following html code:
<html>
<head>
<title>Part 2</title>
</head>
<body>
<applet codebase="/demo/quote/classes" code="/demo/quote/JavaQuote.class"
width="300" height="125" >
<param name="bgcolor" value="ffffff">
<param name="bheight" value="10">
<param name="bwidth" value="10">
<param name="delay" value="1000">
<param name="fontname" value="TimesRoman">
<param name="fontsize" value="14">
<param name="link" value="http://java.sun.com/events/jibe/index.html">
<param name="number" value="3">
<param name="quote0" value="Living next to you is in some ways like sleeping with an elephant. No matter how friendly and even-tempered is the beast, one is affected by every twitch and grunt.|- Pierre Elliot Trudeau|000000|ffffff|7">
<param name="quote1" value="Simplicity is key. Our customers need no special technology to enjoy our services. Because of Java, just about the entire world can come to PlayStar.|- PlayStar Corporation|000000|ffffff|7">
<param name="quote2" value="The ubiquity of the Internet is virtually wasted without a platform which allows applications to utilize the reach of Internet to write ubiquitous applications! That's where Java comes into the picture for us.|- NetAccent|000000|ffffff|7">
<param name="space" value="20">
</applet>
</body>
</html>When I previewed it in Netscape Navigator, a box with a red X appeared, and this appeared in the console when I opened it:
load: class /demo/quote/JavaQuote.class not found.
java.lang.ClassNotFoundException: .demo.quote.JavaQuote.class
 at sun.applet.AppletClassLoader.findClass(Unknown Source)
 at java.lang.ClassLoader.loadClass(Unknown Source)
 at sun.applet.AppletClassLoader.loadClass(Unknown Source)
 at java.lang.ClassLoader.loadClass(Unknown Source)
 at sun.applet.AppletClassLoader.loadCode(Unknown Source)
 at sun.applet.AppletPanel.createApplet(Unknown Source)
 at sun.plugin.AppletViewer.createApplet(Unknown Source)
 at sun.applet.AppletPanel.runLoader(Unknown Source)
 at sun.applet.AppletPanel.run(Unknown Source)
 at java.lang.Thread.run(Unknown Source)
Caused by: java.io.FileNotFoundException: \demo\quote\JavaQuote\class.class (The system cannot find the path specified)
 at java.io.FileInputStream.open(Native Method)
 at java.io.FileInputStream.<init>(Unknown Source)
 at java.io.FileInputStream.<init>(Unknown Source)
 at sun.net.www.protocol.file.FileURLConnection.connect(Unknown Source)
 at sun.net.www.protocol.file.FileURLConnection.getInputStream(Unknown Source)
 at sun.applet.AppletClassLoader.getBytes(Unknown Source)
 at sun.applet.AppletClassLoader.access$100(Unknown Source)
 at sun.applet.AppletClassLoader$1.run(Unknown Source)
 at java.security.AccessController.doPrivileged(Native Method)
 ... 10 more
Exception in thread "Thread-4" java.lang.NullPointerException
 at sun.plugin.util.GrayBoxPainter.showLoadingError(Unknown Source)
 at sun.plugin.AppletViewer.showAppletException(Unknown Source)
 at sun.applet.AppletPanel.runLoader(Unknown Source)
 at sun.applet.AppletPanel.run(Unknown Source)
 at java.lang.Thread.run(Unknown Source)
java.lang.NullPointerException
 at sun.plugin.util.GrayBoxPainter.showLoadingError(Unknown Source)
 at sun.plugin.AppletViewer.showAppletStatus(Unknown Source)
 at sun.applet.AppletPanel.run(Unknown Source)
 at java.lang.Thread.run(Unknown Source)What went wrong? and how can I make it run correct?
Thanks,
Nathan Pinno

JavaQuote.class is not where your HTML says it is. That is at the relative URL "/demo/quote/".

HT4528 Hi I need help with the volume on my phone even on speaker i can barely hear who I am speaking with

Hi I need help with the volume on my phone, even on speaker I can barely hear who I am speaking with . How do I make it louder /

Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/ts1630
-Griff W.

I need help with the upgraded version of Garage Band '11. Its totally different.

Similar Messages

Maybe you are looking for