I need help with uninstalling FP so I can install FP or some hemlock

I cannot get flash player to install, uninstall so that I can install, as all the instructions tell us to do. That insane crazy pop up that tells you to install FP, that you can only say no to so that it will go away is making me want to eat a bullet. I cannot take it much longer. I have no idea what to do. And, the crazy thing is that I did do something a couple weeks ago that made it all stop and then somehow it started again. Sux to fix something but not know what you did, so that you break it again. Anywho, I have tried everything from doing a manual install with the downloader, tried downloading an older vs, but I could not find one that was compatible with Vista, which is my operating system (32 bit). I did go to the hyperlink provided on another persons delimna and the site said that I have the most current vs of FP installed. But, it is not showing in my programs list nor is it in my files in my C drive, nor a trace of it in common files. It is not in regedit in local machine/software/adobe. I cannot find it, only the saved programs to uninstall or install it saved to desktop. Wait, I just rechecked my programs and features and it shows flashplayer 10 Actuve X and shockwave player 11.5, both of which are not found anywhere else in my computer. I am so weary of all of this. I just need help. Please, please please, It is horrible because you have to have fp to run certain programs, but it will not run and I do not know if this is a Adobe issue, Windows issue or a Vaio issue.

Hokay, I have Norton 360, it is run regularily, I also ran ESET this week, I use malwarebytes, pest patrol, registry repair. I took adaware and mcafee off my system as I was told that too many virus softwares conflict and can cause problems. I have had my email stolen, along with the book, it appears someone stripped my email and sold it to a spammer. It is not coming from my computer. Makes me very upset. I have turned this into the FBI cyber crimes site, AOL and Yahoo, since the link emails in the details are yahoo accounts. I get the spam emails as well. Ppl who click on the hyperlinks, some of them are getting viruses, but as I said, these are not being generated by me, but rather from the web. I hate these ppl. My system appears clean.
The pop ups are what everyone who is complaining about this issue are getting, I am assuming. I am seeing this complaint all over. Here is the information about the pop up:
It pops up with any navigation you try to do in IE....any. It will pop up ten times in a row during simple functions. Makes you insane. And the only way you can answer it is to click don't allow. End of story. over and over and over. If you research, web wide you are told to uninstall FP and then reinstall, and there are hyper links provided to do it with, and then you are told to try doing it manually with the Adobe downloader. NOTHING works. I am truly so upset, I cannot use my laptop, a storm surge ate my desktop and I am waiting on insurance to replace that the the iPad is limited. I have no idea which or what is the prob, IE, Adobe or Vaio, which is my make of computer. But, this is so ridiculous.

Similar Messages

Need Help with UNINSTALLING Photoshop CS

Hey everyone
I want to uninstall my Photoshop CS application on my mac (The whole CS suite actually) since its takes up a ton of room and I no longer use it.
So I want to know how can I safely uninstall them. I read around and watched some youtube vids. Some people say just throw it all in the trash and empty it. Others say not to do that.
I put in the first disk thinking there would be an uninstall thing there but there wasn't.
So can I just throw it in the trash and go around finding the remaining stuff in my library and/or preferences folder? Is this the only way for us mac users to uninstall programs/apps?
Please help, I need to free up some space.
Thanks!
- Spyrochick101

Rave,
Thanks for the reply.
I have looked at those permissions and either set them or confirmed to myself that they were correct at least 4 times in this crusade so far.
I did find a folder named SLStore_v1 which appears to be empty. Anything there? Should the 2 folders where permissions were set have contents?
I am, currently, re-downloading PSCC. It is going very slowly. I'll see what happens when that is complete or has failed as it has times in the past.
Does the downloading need to happen when I have invoked the Root User? Or, is it the running and set up that's important there?
Jerry

I need help with doing a system wipe/re-install

I want to completely wipe my Macbook Pro (running Mountain Lion) and do a OS reinstall so that it is as if it was just taken out of the box. I have already moved files I want to keep over to an external. My question is this, do I need to do anything in regards to Microsoft Office or iTunes? Do I need to deauthorize my iTunes or my Microsoft Office activation code? Also, how do I even go about doing this system reset?

Follow these instructions step by step to prepare a Mac for sale:
Step One - Back up your data:
       A. If you have any Virtual PCs shut them down. They cannot be in their "fast saved" state. They must be shut down from inside Windows.
       B. Clone to an external drive using using Carbon Copy Cloner.
          1. Open Carbon Copy Cloner.
          2. Select the Source volume from the Select a source drop down menu on the left side.
          3. Select the Destination volume from the Select a destination drop down menu on the right
              side.
          4. Click on the Clone button. If you are prompted about creating a clone of the Recovery HD be
              sure to opt for that.
               Destination means a freshly erased external backup drive. Source means the internal
               startup drive.
Step Two - Prepare the machine for the new buyer:
          1. De-authorize the computer in iTunes! De-authorize both iTunes and Audible accounts.
          2, Remove any Open Firmware passwords or Firmware passwords.
          3. Turn the brightness full up and volume nearly so.
          4. Turn off File Vault, if enabled.
          5. Disable iCloud, if enabled: See.What to do with iCloud before selling your computer
Step Three - Install a fresh OS:
     A. Snow Leopard and earlier versions of OS X
          1. Insert the original OS X install CD/DVD that came with your computer.
          2. Restart the computer while holding down the C key to boot from the CD/DVD.
          3. Select Disk Utility from the Utilities menu; repartition and reformat the internal hard drive.
              Optionally, click on the Security button and set the Zero Data option to one-pass.
          4. Install OS X.
          5. Upon completion DO NOT restart the computer.
          6. Shutdown the computer.
     B. Lion and Mountain Lion (if pre-installed on the computer at purchase*)
         Note: You will need an active Internet connection. I suggest using Ethernet if possible because
                   it is three times faster than wireless.
          1. Restart the computer while holding down the COMMAND and R keys until the Mac OS X
              Utilities window appears.
          2. Select Disk Utility from the Mac OS X Utilities window and click on the Continue button.
          3. After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click
              on the Erase tab in the DU main window.
          4. Set the format type to Mac OS Extended (Journaled.) Optionally, click on the Security button
              and set the Zero Data option to one-pass.
          5. Click on the Erase button and wait until the process has completed.
          6. Quit DU and return to the Mac OS X Utilities window.
          7. Select Reinstall Lion/Mountain Lion and click on the Install button.
          8. Upon completion shutdown the computer.
*If your computer came with Lion or Mountain Lion pre-installed then you are entitled to transfer your license once. If you purchased Lion or Mountain Lion from the App Store then you cannot transfer your license to another party. In the case of the latter you should install the original version of OS X that came with your computer. You need to repartition the hard drive as well as reformat it; this will assure that the Recovery HD partition is removed. See Step Three above. You may verify these requirements by reviewing your OS X Software License.

:::NEED HELP WITH UNINSTALL:::

Hello Adobe CS experts!!
Before I do anything, I thought I'd ask you guys...
I currently have have 3 versions of Adobe CS on my computer. CS, CS3 and CS4...
I'd like to uninstall the CS version but there is no uninstaller I can find.
Does anyone know the proper method of manually uninstalling version CS?
Also, When I do, will any of the files removed effect my latest version that I'm keeping on this computer?
Thanks!
Toby

For CS (not CS 3) just drag to the trash.

Need help with PHP mail script [was: Can someone please help me?]

I'm trying to collect data from a form and email it. I'm using form2mail.php and the problem is that the email is not collecting the form info and it has the same email address in the From: and To: lines. I'm really stuck and would appreciate any help.
Here is the HTML code:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />
<title>Contact Us</title>
<style type="text/css">

</style>
</head>
<body>
<div align="center"><img src="nav2.jpg" alt="nav bar" width="698" height="91" border="0" usemap="#Map2" />
<map name="Map2" id="Map2">
<area shape="rect" coords="560,9,684,38" href="accessories.html" />
<area shape="rect" coords="456,8,548,38" href="contact.html" />
<area shape="rect" coords="305,8,435,40" href="photog.html" />
<area shape="rect" coords="187,9,283,39" href="services.html" />
<area shape="rect" coords="81,10,167,39" href="aboutus.html" />
<area shape="rect" coords="5,10,68,39" href="index.html" />
</map>
<map name="Map" id="Map">
    <area shape="rect" coords="9,9,69,39" href="index.html" />
    <area shape="rect" coords="83,11,165,39" href="aboutus.html" />
    <area shape="rect" coords="182,9,285,38" href="services.html" />
    <area shape="rect" coords="436,14,560,37" href="contact.html" />
    <area shape="rect" coords="563,14,682,38" href="accessories.html" />
</map>
</div>
<p> </p>
<form id="TheForm" name="TheForm" action="form2mail.php" method="post">
<p align="center" class="style2">P<span class="style1">lease fill out form below for a "free no obligation quote" then click submit.</span></p>
<p align="center" class="style3">(*Required Information)</p>
<div align="center">
    <pre><strong><span class="style8">*Contact Name</span> </strong><input name="name" type="text" id="name" />
<span class="style8"><strong>
Business Name </strong></span><input name="bn" type="text" id="bn" />
<span class="style8"><strong>*Phone Number <input type="text" name="first" size="3" onFocus="this.value='';"
    onKeyup="checkNumber(this.value); autoTab(this, document.TheForm.second);" maxlength="3" value="###" /> - <input type="text" name="second" size="3" onFocus="this.value='';" onKeyup="checkNumber(this.value); autoTab(this, document.TheForm.third);" maxlength="3" value="###" /> - <input type="text" name="third" size="4" onFocus="this.value='';" onKeyup="checkNumber(this.value); autoTab(this, document.TheForm.fourth);" maxlength="4" value="####"/> </strong></span>
<strong><span class="style1">*</span><span class="style8">Email Address</span> <input name="email" type="text" id="email" />     </strong> </pre>
    <label><span class="style9">*Re-enter to confirm</span>
    <input name="emx" type="text" id="emx" /></label><br /><br /><span class="style9">
<label></label>
    </span>
    <p><span class="style9">*Best time to call </span>
      <select name="name1[]" multiple size="1" >
        <option>8am-9am</option>
        <option>9am-10am</option>
        <option>10am-11am</option>
        <option>11am-12pm</option>
        <option>12pm-1pm</option>
        <option>1pm-2pm</option>
        <option>2pm-3pm</option>
        <option>3pm-4pm</option>
        <option>4pm-5pm</option>
        <option>5pm-6pm</option>
        <option>6pm-7pm</option>
        <option>7pm-8pm</option>
      </select>
      <br />
      <br />
      <span class="style9">Type of Location</span>
      <select name="name2[]" multiple size="1" >
        <option>Residential</option>
        <option>Commercial</option>
      </select>
      <br />
      <br />
        <span class="style1"><br />
        <strong><br />
          <span class="style6">*Type of Services Requested:</span></strong><br />
        </span><strong><span class="style10">(check all that apply)</span><br />
            </strong><br />
            <span class="style7"><span class="style1"><strong>Janitorial cleaning</strong></span>
            <input type="checkbox" name="checkbox[]" value="checkbox" multiple/>
            <br />
            </span><strong><br />
              <span class="style8">Mobile Auto Detailing</span>
            <input type="checkbox" name="checkbox2[]" value="checkbox" multiple/>
            <br />
            <br />
              </strong><span class="style9">Moving/Hauling</span>
      <input type="checkbox" name="checkbox3[]" value="checkbox" multiple/>
      <br />
      <br />
              <span class="style9">Pressure washing</span>
      <input type="checkbox" name="checkbox4[]" value="checkbox" multiple/>
      <br />
      <br />
              <span class="style9">Window washing</span>
      <input type="checkbox" name="checkbox5[]" value="checkbox" multiple/>
      <br />
      <br />
              <span class="style9">Window Tinting</span>
      <input type="checkbox" name="checkbox6[]" value="checkbox" multiple/>
      <br />
      <br />
              <span class="style9">Boat cleaning</span>
      <input type="checkbox" name="checkbox7[]" value="checkbox" multiple/>
      <br />
      <br />
              <span class="style9">RV cleaning</span>
      <input type="checkbox" name="checkbox8[]" value="checkbox" multiple/>
      <br />
      <br />
              <span class="style9">Motorcycle cleaning</span>
      <input type="checkbox" name="checkbox9[]" value="checkbox" multiple/>
      <br />
      <br />
      <br />
      <br />
      <input name="SB" type="button" class="style9" value="Submit" onClick="sendOff();">
    </p>
</div></label>
<script language="JavaScript1.2">
// (C) 2000 www.CodeLifter.com
// http://www.codelifter.com
// Free for all users, but leave in this header
var good;
function checkEmailAddress(field) {
// Note: The next expression must be all on one line...
//       allow no spaces, linefeeds, or carriage returns!
var goodEmail = field.value.match(/\b(^(\S+@).+((\.com)|(\.net)|(\.edu)|(\.mil)|(\.gov)|(\.org) |(\..{2,2}))$)\b/gi);
if (goodEmail){
   good = true
} else {
   alert('Please enter a valid e-mail address.')
   field.focus()
   field.select()
   good = false
function autoTab(startPoint,endPoint){
if (startPoint.getAttribute&&startPoint.value.length==startPoint.getAttribute("max length"))
endPoint.focus();
function checkNumber(phoneNumber){
var x=phoneNumber;
var phoneNumber=/(^\d+$)|(^\d+\.\d+$)/
if (phoneNumber.test(x))
testResult=true
else{
alert("Please enter a valid number.")
phoneNumber.focus();
phoneNumber.value="";
testResult=false
return (testResult)
function sendOff(){
   namecheck = document.TheForm.name.value
   if (namecheck.length <1) {
      alert('Please enter your name.')
      return
   good = false
   checkEmailAddress(document.TheForm.email)
   if ((document.TheForm.email.value ==
        document.TheForm.emx.value)&&(good)){
      // This is where you put your action
      // if name and email addresses are good.
      // We show an alert box, here; but you can
      // use a window.location= 'http://address'
      // to call a subsequent html page,
      // or a Perl script, etc.
      window.location= 'form2mail.php';
   if ((document.TheForm.email.value !=
          document.TheForm.emx.value)&&(good)){
          alert('Both e-mail address entries must match.')
</script>
</form>
<p> </p>
</body>
</html>
and here is the form2mail.php:
<?php
# You can use this script to submit your forms or to receive orders by email.
$MailToAddress = "[email protected]"; // your email address
$redirectURL = "http://www.chucksmobile.com/thankyou.html"; // the URL of the thank you page.
$MailSubject = "[Customer Contact Info]"; // the subject of the email
$sendHTML = FALSE; //set to "false" to receive Plain TEXT e-mail
$serverCheck = FALSE; // if, for some reason you can't send e-mails, set this to "false"
# copyright 2006 Web4Future.com =================== READ THIS ===================================================
# If you are asking for a name and an email address in your form, you can name the input fields "name" and "email".
# If you do this, the message will apear to come from that email address and you can simply click the reply button to answer it.
# To block an IP, simply add it to the blockip.txt text file.
# CHMOD 777 the blockip.txt file (run "CHMOD 777 blockip.txt", without the double quotes)
# This is needed because the script tries to block the IP that tried to hack it
# If you have a multiple selection box or multiple checkboxes, you MUST name the multiple list box or checkbox as "name[]" instead of just "name"
# you must also add "multiple" at the end of the tag like this: <select name="myselectname[]" multiple>
# you have to do the same with checkboxes
Web4Future Easiest Form2Mail (GPL).
Copyright (C) 1998-2006 Web4Future.com All Rights Reserved.
http://www.Web4Future.com/
This script was written by George L. & Calin S. from Web4Future.com
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
# DO NOT EDIT BELOW THIS LINE UNLESS YOU KNOW WHAT YOU ARE DOING ===================================================
$w4fver = "2.2";
$ip = ($_SERVER['HTTP_X_FORWARDED_FOR'] == "" ? $_SERVER['REMOTE_ADDR'] : $_SERVER['HTTP_X_FORWARDED_FOR']);
//function blockIP
function blockip($ip) {
$handle = @fopen("blockip.txt", 'a');
@fwrite($handle, $ip."\n");
@fclose($handle);
$w4fx = stristr(file_get_contents('blockip.txt'),getenv('REMOTE_ADDR'));
if ($serverCheck) {
if (preg_match ("/".str_replace("www.", "", $_SERVER["SERVER_NAME"])."/i", $_SERVER["HTTP_REFERER"])) { $w4fy = TRUE; } else { $w4fy = FALSE; }
} else { $w4fy = TRUE; }
if (($w4fy === TRUE) && ($w4fx === FALSE)) {
$w4fMessage = "<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.01 Transitional//EN\" \"http://www.w3.org/TR/html4/loose.dtd\"><html>\n<head><meta http-equiv=\"Content-Type\" content=\"text/html; charset=iso-8859-1\"></head><body><font face=3Dverdana size=3D2>";
if (count($_GET) >0) {
reset($_GET);
while(list($key, $val) = each($_GET)) {
$GLOBALS[$key] = $val;
if (is_array($val)) {
   $w4fMessage .= "<b>$key:</b> ";
   foreach ($val as $vala) {
    $vala =stripslashes($vala);
    $vala = htmlspecialchars($vala);
    if (trim($vala)) { if (stristr($vala,"Content-Type:") || stristr($vala,"MIME-Version") || stristr($vala,"Content-Transfer-Encoding") || stristr($vala,"bcc:")) { blockip($ip); die("ILLEGAL EXECUTION DETECTED!"); } }
    $w4fMessage .= "$vala, ";
   $w4fMessage .= "<br>\n";
else {
   $val = stripslashes($val);
   if (trim($val)) { if (stristr($val,"Content-Type:") || stristr($val,"MIME-Version") || stristr($val,"Content-Transfer-Encoding") || stristr($val,"bcc:")) { blockip($ip); die("ILLEGAL EXECUTION DETECTED!"); } }
   if (($key == "Submit") || ($key == "submit")) { }
   else { if ($val == "") { $w4fMessage .= "$key: - <br>\n"; }
     else { $w4fMessage .= "<b>$key:</b> $val<br>\n"; }
} // end while
}//end if
else {
reset($_POST);
while(list($key, $val) = each($_POST)) {
$GLOBALS[$key] = $val;
if (is_array($val)) {
   $w4fMessage .= "<b>$key:</b> ";
   foreach ($val as $vala) {
    $vala =stripslashes($vala);
    $vala = htmlspecialchars($vala);
    if (trim($vala)) { if (stristr($vala,"Content-Type:") || stristr($vala,"MIME-Version") || stristr($vala,"Content-Transfer-Encoding") || stristr($vala,"bcc:")) {blockip($ip); die("ILLEGAL EXECUTION DETECTED!"); } }
    $w4fMessage .= "$vala, ";
   $w4fMessage .= "<br>\n";
else {
   $val = stripslashes($val);
   if (trim($val)) { if (stristr($val,"Content-Type:") || stristr($val,"MIME-Version") || stristr($val,"Content-Transfer-Encoding") || stristr($val,"bcc:")) {blockip($ip); die("ILLEGAL EXECUTION DETECTED!"); } }
   if (($key == "Submit") || ($key == "submit")) { }
   else { if ($val == "") { $w4fMessage .= "$key: - <br>\n"; }
     else { $w4fMessage .= "<b>$key:</b> $val<br>\n"; }
} // end while
}//end else
$w4fMessage .= "<font size=3D1><br><br>\n Sender IP: ".$ip."</font></font></body></html>";
    $w4f_what = array("/To:/i", "/Cc:/i", "/Bcc:/i","/Content-Type:/i","/\n/");
$name = preg_replace($w4f_what, "", $name);
$email = preg_replace($w4f_what, "", $email);
if (!$email) {$email = $MailToAddress;}
$mailHeader = "From: $name <$email>\r\n";
$mailHeader .= "Reply-To: $name <$email>\r\n";
$mailHeader .= "Message-ID: <". md5(rand()."".time()) ."@". ereg_replace("www.","",$_SERVER["SERVER_NAME"]) .">\r\n";
$mailHeader .= "MIME-Version: 1.0\r\n";
if ($sendHTML) {
$mailHeader .= "Content-Type: multipart/alternative;";
$mailHeader .= " boundary=\"----=_NextPart_000_000E_01C5256B.0AEFE730\"\r\n";
$mailHeader .= "X-Priority: 3\r\n";
$mailHeader .= "X-Mailer: PHP/" . phpversion()."\r\n";
$mailHeader .= "X-MimeOLE: Produced By Web4Future Easiest Form2Mail $w4fver\r\n";
if ($sendHTML) {
$mailMessage = "This is a multi-part message in MIME format.\r\n\r\n";
$mailMessage .= "------=_NextPart_000_000E_01C5256B.0AEFE730\r\n";
$mailMessage .= "Content-Type: text/plain;   charset=\"ISO-8859-1\"\r\nContent-Transfer-Encoding: quoted-printable\r\n\r\n";
$mailMessage .= trim(strip_tags($w4fMessage))."\r\n\r\n";
$mailMessage .= "------=_NextPart_000_000E_01C5256B.0AEFE730\r\n";
$mailMessage .= "Content-Type: text/html;   charset=\"ISO-8859-1\"\r\nContent-Transfer-Encoding: quoted-printable\r\n\r\n";
$mailMessage .= "$w4fMessage\r\n\r\n";
$mailMessage .= "------=_NextPart_000_000E_01C5256B.0AEFE730--\r\n";
if ($sendHTML === FALSE) {
$mailHeader .= "Content-Type: text/plain;   charset=\"ISO-8859-1\"\r\nContent-Transfer-Encoding: quoted-printable\r\n\r\n";
$mailMessage .= trim(strip_tags($w4fMessage))."\r\n\r\n";
if (!mail($MailToAddress, $MailSubject, $mailMessage,$mailHeader)) { echo "Error sending e-mail!";}
else { header("Location: ".$redirectURL); }
} else { echo "<center><font face=verdana size=3 color=red><b>ILLEGAL EXECUTION DETECTED!</b></font></center>";}
?>
Thanks in advance,
Glenn
[Subject line edited by moderator to indicate nature of request]

Using PHP to process an online form and send the input by email is very simple. The mail() function takes a minimum of three arguments, namely: the address the mail is being sent to, the subject line, and the body of the email as a single string. The reason some people use scripts like form2mail.php is because they don't have the knowledge or patience to validate the user input to make sure it's safe to send.
Rather than attempt to trawl through your complex form looking for the problems, I would suggest starting with a couple of simple tests.
First of all, create a PHP page called mailtest.php containing the following script:
<?php
$to = '[email protected]'; // use your own email address
$subject = 'PHP mail test';
$message = 'This is a test of the mail() function.';
$sent = mail($to, $subject, $message);
if ($sent) {
echo 'Mail was sent';
} else {
echo 'Problem sending mail';
?>
Save the script, upload it to your server, and load it into a browser. If you see "Mail is sent", you're in business. If not, it probably means that the hosting company insists on the fifth argument being supplied to mail(). This is your email address preceded by -f. Change the line of code that sends the mail to this:
$sent = mail($to, $subject, $message, null, '[email protected]');
Obviously, replace "[email protected]" with your own email address.
If this results in the mail being sent successfully, you will need to adapt the code in form2mail.php to accept the fifth parameter. You need to change the following line, which is a few lines from the end of the script:
if (!mail($MailToAddress, $MailSubject, $mailMessage,$mailHeader))
Change it to this:
if (!mail($MailToAddress, $MailSubject, $mailMessage,$mailHeader, '[email protected]'))
Again, use your own email address instead of "[email protected]".
Once you have determined whether you need the fifth argument, test form2mail.php with a very simple form like this:
<form id="form1" name="form1" method="post" action="form2mail.php">
<p>
    <label for="name">Name:</label>
    <input type="text" name="name" id="name" />
</p>
<p>
    <label for="email">Email:</label>
    <input type="text" name="email" id="email" />
</p>
<p>
    <label>
      <input type="checkbox" name="options[]" value="boat cleaning" id="options_0" />
      Boat cleaning</label>
    <br />
    <label>
      <input type="checkbox" name="options[]" value="RV cleaning" id="options_1" />
      RV cleaning</label>
    <br />
    <label>
      <input type="checkbox" name="options[]" value="motorcycle cleaning" id="options_2" />
      Motorcycle cleaning</label>
</p>
<p>
    <input type="submit" name="send" id="send" value="Submit" />
</p>
</form>
If that works, you can start to make the form more complex and add back your JavaScript validation.

Need help with a simple Rename/Join Domain/Install SCCM Client Task Sequence

Good morning everyone,
I need to create a very simple task sequence that will run an .exe that we have created that renames the computer based on a prefix-serialnumber...then restarts, adds it to our domain, restarts, and then installs the SCCM client.
1) run rename program
2) join to domain
3) install sccm client
Can someone help me with the steps that will be required for this?
Thank you very much!
**note, these will not be formatted/have an OS installation ran on it with this task sequence. The situation is that we are receiving 400+ custom configured laptops, and we're going to have to rename/join/install sccm on each...trying to simplify
this
any recommendations are greatly appreciated!

Narcoticoo : Which boot image am i supposed to be using to insure that it boots into Standard Windows, NOT WinPE? I have a standard x86 package / boot image i've been using. If it boots up with this, it goes into WinPE (correct me if I'm wrong,
for this seems to be what happens each time it boots off the boot image...it does not go into windows standard/full)
When I go into properties of the one i'm using, and take the check off of "Use a boot image", where it will not boot to WinPE, it will not even show up in my list of available task sequences for
1) when I PXE boot to try the task sequence, or
2) when I try to make stand-alone media for this task sequence as you have suggested
When I run the standalone media, the only log files I find are the following with errors:
PackageID = 'MPS0014E' InstallSoftware
12/8/2014 12:28:36 PM 2344 (0x0928)
BaseVar = '', ContinueOnError='' InstallSoftware
12/8/2014 12:28:36 PM 2344 (0x0928)
ProgramName = 'MPHS - Rename Computer' InstallSoftware
12/8/2014 12:28:36 PM 2344 (0x0928)
SwdAction = '0002' InstallSoftware
12/8/2014 12:28:36 PM 2344 (0x0928)
IsSMSV4PlusClient() == true, HRESULT=80004005 (e:\nts_sccm_release\sms\client\osdeployment\installsoftware\main.cpp,332)
InstallSoftware 12/8/2014 12:28:36 PM
2344 (0x0928)
Configuration Manager client is not installed
InstallSoftware 12/8/2014 12:28:36 PM
2344 (0x0928)
Process completed with exit code 2147500037
TSManager 12/8/2014 12:28:36 PM
1544 (0x0608)
TSManager 12/8/2014 12:28:36 PM
1544 (0x0608)
Failed to run the action: Install Package.
Unspecified error (Error: 80004005; Source: Windows)
TSManager 12/8/2014 12:28:36 PM
1544 (0x0608)
Failed to run the action: Install Package. Execution has been aborted
TSManager 12/8/2014 12:28:36 PM
1544 (0x0608)
Do not send status message in full media case
TSManager 12/8/2014 12:28:36 PM
1544 (0x0608)
Failed to run the last action: Install Package. Execution of task sequence failed.
Unspecified error (Error: 80004005; Source: Windows)
TSManager 12/8/2014 12:28:36 PM
1544 (0x0608)
Do not send status message in full media case
TSManager 12/8/2014 12:28:36 PM
1544 (0x0608)
Execution::enExecutionFail != m_eExecutionResult, HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmanager\tsmanager.cpp,866)
TSManager 12/8/2014 12:43:48 PM
1544 (0x0608)
Task Sequence Engine failed! Code: enExecutionFail
TSManager 12/8/2014 12:43:48 PM
1544 (0x0608)
TSManager 12/8/2014 12:43:48 PM
1544 (0x0608)
Task sequence execution failed with error code 80004005
TSManager 12/8/2014 12:43:48 PM
1544 (0x0608)

Need help with my iTunes-new computer-can't access my music

We just got a new computer and I transferred all of my songs from the old to the new and now when I try to access them in iTunes I get an error message that "it cannot be used because the original file cannot be located" Do I have to put in the DVD with all of the files on it in order to use any of my song? I thought that I saved them to my hard drive, but who knows....HELP!!! pLEase!!!

You haven't told us enough about what you did.
You need to explain exactly how you did your transfer.
If you don't care about your ratings and play counts and your really did copy your files across, there is a simple way of getting going again.
With iTunes closed drag iTunes Library.itl and iTunes Music Library.itl out of the iTunes folder to the desk top.
Start iTunes and you will have an empty library. Now simply add the folder with your music files in it - normally iTunes Music - to iTunes with File>Add folder to library.
If you didn't copy your files across, try putting the DVD in the drive and opening iTunes - can iTunes find your files now. If so it is a sign you added the files to your library without copying them to your internal HD.

Need Help with Windows 7 Certifications Manager - Can't log on easily

I have to do a complete restore of my 7 Windows Home Premium OS. I downloaded all of the drivers, got everything up and running, but now whenever I use Firefox, the only browser I utilize, I always get the pop-up caution box that states "Do you want to allow the following program to make changes to this computer?" I looked at where the default was set for that message, and it is set according to Windows' recommendations. Even though I have good virus protection (the complete Avast version), I am not comfortable with the thought of disabling the feature completely.
I have no experience with certificates, but with the use of Windows Help, I was able to get to the program, but I found NO program with mozilla in the string.
I think the problem is with a certification, but I have never had this problem before and would very much appreciate any assistance!
Thank you,
Belle

Hello Whatsername,
BugCheckCode 10 is the decimal version of this error 0x0000000A.
Please start by trying to apply the hotfix that is listed on this Microsoft kb article
Error message on a blue screen on a computer that is running Windows 7 or Windows Server 2008 R2: "S...
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical.

I need help with iPhoto slideshow. I can't "save" changes. Particularly the rotate feature. I rotate a photo 90 degrees... and the next time I play it...it's back to original. Sideways! Very frustrating.

How do I save changes on iPhoto slideshow. I rotate a photo... then it reverts back to original (sideways) next time it plays.

With the amount of information you've provided it's impossible to offer a solution. We can't see your computer so we need to know the details of your problem and setup, i.e.:
what version of iPhoto are you using?
what system version are you running?
is your slideshow from an album or from the slideshow mode?
what theme are you using?
what fixes have you tried?
where is your library located?
did you apply any updates or upgrades just prior to the problem occurring?
are you running a "managed" or "referenced" library?
what type of Mac?
how much free space on your boot drive?

I need help with a plugin. I can't get the quciktime import plugin. Has anyone noticed this.

I have noticed that the whole abilities to import quicktime plugin. After effects says its gone. I can't find any downloads. I am still on free trial. But why would I buy something in a store that isn't full. Tech support says they won't help. Who knows what to do.

Nobody can tell you anything without proper system info or other technical details. Start by reinstalling the program and Quicktime. Otherwise the relevant stuff could simply be blocked by a firewall/ virus scanner or whatever and you need to make it behave...
Mylenium

Need help with reader 11.0.5 can't print

I can open the file in reader but it just won't print. No error messages. Print screen comes up and when I click print it does nothing. Printer works for all other printing
Message was edited by: coryd22

Thanks for the reply.
I changed the setting you suggested, did a restart of Reader, and ... still cannot print. Same error messages.

Need help with my apple tv

I need help with my I tunes billing

itunes can play a LOT! more formats then the appletv can unsupported files will not show
http://www.apple.com/appletv/specs/
H.264 video up to 1080p, 30 frames per second, High or Main Profile level 4.0 or lower, Baseline Profile level 3.0 or lower with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats
MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats
Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format

Need help with Page Layout and Background Scaling

hello, everyone.
I am in the process of designing a new website for myself,
and while I was researching nicely designed pages to use as
inspiration, I stumbled upon this site:
http://www.jeffsarmiento.com/
obviously, the design is very impressive, but it also
incorporates a lot of web mechanics that I have been trying to
figure out, so I will use this page as an example.
one thing I need help with is backgrounds. as you can see in
the posted website, the creator used a seamlessly tiled paper
texture to display the bulk of his content on. also make not of the
pattern that is located to the left of the paper texture. how do I
create seamless backgrounds like this that will scale to fit any
amount of content or any resolution? I can't imagine that the guy
that made that site created a new size background every time he
made an update, so there has to be an easier way.
the second thing that I am having trouble with is general
site layout. I have read that most sites used series of invisible
tables to organize there content, but when I open the source of
this page in dreamweaver, he was using something different. div
tags? should I be using these? who do I use them? are there any
general layout tips that someone could pass on to me? perhaps a
link to a good tutorial?
please help me. i am very confused.
thanks so much.

IMO not a good site to emulate. To wit:
Top background image:
http://www.jeffsarmiento.com/images/bg-top.jpg;
745px
x 350px 137K
Main background image:
http://www.jeffsarmiento.com/images/bg-tile.jpg;
745px x 950px 130K
Total page size: 454K (Check here:
www.websiteoptimization.com)
Website usability experts routinely recommend a maximum page
size of ~80K
Check out the We We Scale @ www.FutureNowInc.com/wewe/ where
they suggest,
"You speak about yourself approximately 0,003 times as often
as you speak
about your customers. Might that have an impact on your
effectiveness?"
That is 100% consistent with the #1 Web Design mistake:
"Believing people
care about you and your web site." or to phrase more
expansively, "Our site
tries to tell you how wonderful we are as a company, but not
how we're going
to solve your problems."
www.sitepoint.com has some excellent books on making a
website actually
attractive and usable at the same time.
Walt
"beWILLdered_" <[email protected]> wrote in
message
news:[email protected]...
> hello, everyone.
> I am in the process of designing a new website for
myself, and while I was
> researching nicely designed pages to use as inspiration,
I stumbled upon
> this
> site:
>
http://www.jeffsarmiento.com/
> obviously, the design is very impressive, but it also
incorporates a lot
> of
> web mechanics that I have been trying to figure out, so
I will use this
> page as
> an example.
> one thing I need help with is backgrounds. as you can
see in the posted
> website, the creator used a seamlessly tiled paper
texture to display the
> bulk
> of his content on. also make not of the pattern that is
located to the
> left of
> the paper texture. how do I create seamless backgrounds
like this that
> will
> scale to fit any amount of content or any resolution? I
can't imagine that
> the
> guy that made that site created a new size background
every time he made
> an
> update, so there has to be an easier way.
> the second thing that I am having trouble with is
general site layout. I
> have
> read that most sites used series of invisible tables to
organize there
> content,
> but when I open the source of this page in dreamweaver,
he was using
> something
> different. div tags? should I be using these? who do I
use them? are there
> any
> general layout tips that someone could pass on to me?
perhaps a link to a
> good
> tutorial?
> please help me. i am very confused.
>
> thanks so much.
>

Project Server 2013: I am using Project Server Permission Mode and need help with permission assignments?

Hi
Project Server 2013: I am using Project Server Permission Mode and need help with permission assignments?
How can I change Permissions for the individual users to see specific projects or all projects in project center and to see specific quick launch items?
For Example: if i have 4 users, A, B, C and D. what i want is:
User A can see everything and act as a project manager or Admin.
User B can view all projects in project centre but can change the schedule or resource assignment etc.
User C can only act as approver of projects and can view all projects in project centre.
User D can only view specific projects for which permissions are given.
can i have some expert help in sorting and understanding permission modes... as i was playing with project server mode permissions and can't figure out how to apply the above scenario to set of my user.
Thanks in Advance
Cheers
AJ
Ajay Kumar

Hi Ajay,
Please refer to this link for detailed explanations about PS2013 security model.
http://technet.microsoft.com/en-us/library/cc197638(v=office.15).aspx
Actually, it will take a couple of days to explain in detail the security model that is a fundamental and tricky aspect of every PS implementation. But basically, you NEVER set permissions for a single user. You have groups in which your insert users. Groups
define "what users can do". Then you associate groups to a corresponding category. Categories define "what user can see". Thus the association of a group with a category will set "what the user can do on the objects he can see". Then, for more advanced security
level, you can use the RBS that will consist in "branches" in which you'll insert users. Based on those branches, you'll customize categories to fine-tune what user can see (for projects and resources) depending on the RBS branch and level.
I'd advice you to start "playing" in a test environment with the default categories/groups that might probably cover your need.
Concerning your 4 users:
user A : add him to the "administrator" group. Be careful that you're mentionning either project manager or administrator, which are 2 groups/categories with totally different permissions level.
user B : basically can see everything and change everything? it could be in the project manager group, assuming that there are no project visibility restrictions on the category via the RBS.
user C : waht do you mean by "approver"? Workflow approvals? Then it will be the portfolio manager group. Task update or timesheet approval? Then it is another long topic: please refer in the documentation to the "status manager" and "timesheet manager"
concepts. There are not related to the security model. In a few words, the status manager is the owner of the project plan, is defined for each task and approves tasks updates. The timesheet manager is an attribute defined for each resource in its parameters
and approves resource timesheet.
user D : you have to define which permission level must be given to this user. Basically it could be a team member that will see only projects he's in the project team. Note that team member cannot interact with the project plan in another way than submitting
timesheets and/or tasks updates which must be approved.
Once more, those are large and complex subjects that require a deep dive into your business model and tons of tests in a test environment.
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS

Need help with new itouch

Please bare with me, while I 'try' to explain.
I have my itunes account linked to my iphone and macbook. I have bought my daughter an itouch for Xmas. Now I have set up a seperate itunes account for her on my other Windows laptop. So she is able to purchase apps without them going and clogging up my itunes... NOW this is the bit i need help with...
How can i transfer any music i have on my itunes to her itunes? and vice versa?
Thanks in advance

Right, I have now gone down the line of setting up a new user on my macbook, her own ID and then with the help of Mr google, I followed the steps of sharing my music, by moving my itunes media folder to a shared folder.
Now i got my music on her itunes libary but when i did a test download of an app, it wont show in the library. I have even done the 'transfer purchases'. and its still not showing. I am slowing loosing the will to live with it! I really need help.

I need help with uninstalling FP so I can install FP or some hemlock

Similar Messages

Maybe you are looking for