I need help with WRT54G v. 4 and xbox

I keep getting freezes whenever anyone else on my network accesses the internet. All the computers are wireless, only the 360 is wired. I have set the MTU for 1365. I attempted to set the 360 for a static ip so i could forward ports to it, but whenever I try to test it, it always says that the ip test is failed. I can get my computer on with a static ip, why not the 360? Please help

Hi.
Try using the static IP 192.168.1.10 SM 255.255.255.0 and Default Gateway 192.168.1.1 on the XBOX. ( Supposing your router is set to default IP). After assigning the static IP powercycle the router and check the connection if the IP test fails try upgrading the router firmware. Also check the type of cable that you are using to connect between the router and the Xbox.

Similar Messages

Need help with WRT54G - no software and problems with internent

I'm sure I'm asking a common problem which has been answered already, but I couldn't find any solutions and I'm running out of time (re: getting frustrated as hell). I'm trying to set up a wireless network at my home. The internet/desktop/cable modem work fine. However, when I try to run the connection through the router, the connection fails. The appropriate lights on the router all light up, however. Is there something on the pc I need to do/change? Also, the disk drives on the pc don't work, so I can't load the setup software. Any help would be extremely appreciated.

What is the Version no. of your Router ? You can see it when you flip the router..
As your Internet Service Providor is Cable follow this link to configure your Router.

Need help with my iPhone 5 and my Macbook Pro.

Need help with my iPhone 5 and my Macbook Pro. I was purchased some music on itunes at my mac. Some reason I deleted those music from both on Mac and iPhone 5. Today, I went to my iPhone iTunes store inside of iCloud to redownload my puchased. But those song won't able to sync back to my iTunes library on my Mac. Can anyone help me with that ??....
iPhone 5, iOS 6.0.1

You've posted to the iTunes Match forum, which your question does not appear to be related to. You'll get better support responses by posting to either the iTunes for Mac or iTunes for Windows forum. Which ever is more appropriate for your situation.

I need help with my text tone and I have ring tone. no text tone for the 4s.

I need help with my text tone. I have ring tone no text tone. I have a 4s.

Hi Sarar2333! Let's get your text tones working again!
Here's a link with instructions how to enable and change your alert sounds for your text/notification settings on your iPhone 4S: http://vz.to/1stiF8a. You can ensure text tones are enabled by selecting a tone in the "Text Tone" setting. Let me know how that works out for you. Thanks!
AnthonyTa_VZW
Follow us on Twitter @VZWSupport

Need help with buying graphics card and ram for MSI 865PE NEO 2-V

Hi,
I want to buy 1GB of ram for motherboard MSI 865PE NEO 2-V I need help with finding correct parts.
I also want to buy 512Mb or 1GB graphics card.
as i said before i need help with finding correct ones so they match motherboard, I would appreciate if any one would post link to cheap and fitting parts.
I found graphics card allready, i just need to know if it will fit.
the card is
NVIDIA GeForce 7600 GS (512 MB) AGP Graphics Card
Thanks for help.

here you can see test reports for your mobo:
http://www.msi.com/product/mb/865PE-Neo2-V.html#?div=TestReport

Need help with clickbios ii terminolgy and values. Z77A-GD65 / 3770k

Hello All
I recently purchased a Z77A-GD65 board and after searching I've found the differences in terminology between this and my previous Asus board but still have a couple of settings I cant find any info on.
System Specs:
motherboard: msi z77a-gd65
cpu: intel 3770k
ram: corsair vengeance 2133mhz 1.5v
psu: corsair 850w
First things first is I believe I am running in turbo oc mode. I've selected the oc genie tab on the center right of the bios screen and proceeded to change settings there. With cpu voltage on auto and vdroop set to 50% at 4.6ghz. (I'll try and get screenshots of bios settings soon)
The following are the terms I need help with:
In the my oc genie section;
1. Long duration power limit
2. Long duration maintained
3. Short duration power limit
In the main overclocking section;
4. Digital Compensation level (not in owners manual, options auto/high)
5. Cpu core ocp expander (enabled for overclock 4.5ghz+?)
In the CPU Features section;
6. long duration power limit w (does "w" stand for watts?)
7. long duration maintained s (does "s" stand for seconds?)
8. short duration power limit
9. primary plane current limit a (does "a" stand for amps?)
10. secondary plane current limit
11. primary plane turbo power limit
12. secondary plane turbo power
I know those are a lot of settings, but would appreciate any simple definitions as to what they do and recommended values for mild overclocking (4.5-4.80)
Also on my previous board (Asus P8P67 Pro) my 3770k was stable in prime95 for 18 hrs at 4.5ghz fixed 1.155v with only ram timings put in manually and LLC set to extreme.(or whatever max is called in asus bios) Voltage was fixed and everything else was defailts.

Well I'm back. Been digging around for a few days and found some answers to my questions.
First things first s that for some reason I could not adjust voltage values with the + or - symbols. Clearing cmos did not help this. I had to reflash the bios to get this functionality back as well as clearing cmos before and after the flash.
So I figured out the values in the oc genie section are the same as the normal section but only used when your using the oc genie. (numbers 1-3)
Digital compensation level and ocp expander should be set to high and enabled respectively when going for higher overclocks. (4 and 5)
Now for the rest of my questions ( 6 through 12) I have found suggested settings and some info after hours and hours of searching but still have a couple of questions about them.
Long/short duration power limit, and primary/secondary plane turbo limit. I see suggestion settings of 250 or 255. I take it this is simply max supplied watts to the chip? If so why the 250/255 values? Is that the highest the board will give? Is plane turbo limit related to the enhanced turbo stated and how much wattage can be drawn there while the other limit is for any non turbo frequencies?
Long duration maintained, I've seen 60 suggested a lot. Why is this?
There's not an over abundance of info on these boards as compared to asus so it seems info is a little less documented and video tutorials explaining things are next to none.
Any help would be appreciated. Thanks

HT4528 I need help with my I phone and I can get verizon to let me on there to talk and I will have to have my phone so that I can do what you tell me to do

I need help with my phone it is not ringing and I cant figure where in here to make it so it will something has been pushed so I cant hear any calls or texts

Not when you insist on being so impatient.
These are user to user support forums. No one here is paid to read or respond to messages.
Try explaining the issue instead of the jumbled, rambling mess of a title and we will be happy to assist.

Need Help with External Hard drives and too much music

I am not terribly tech-savvy, and I need your help. I have a G5 PPC dual processor with an internal 250GB drive. I have two seagate firewire/USB2 external hard drives. One is 250GB and one is 350GB. I want to know how to use them to get my Mac to run faster and better.
My original hard drive is 7GB shy of being full. Almost half of this is my itunes library which is over 100GB. The older (250GB) hard drive has about 150GB of photos/videos.
My Mac is running slow as molasses and when I power up the external hard drives it slows down to what I recall my original Mac Plus ran like.
I use the G5 primarily to work with photos, illustrations and creating the occasional DVD with video and photos. the apps I use most often are Photoshop, Illustrator and Painter. I always listen to music while work.
I hope all of this information is helpful! Here is my question:
What is the best way for me to set up and use these external hard drives to return my G5 to its original blazing (to me) fast speed?
PPC G5 Mac OS X (10.4.9)

I think you should look at adding two 500GB internal drives. I'd say Maxtor MaxLine Pro for cost, but they also run much warmer (43ºC even when nearly doing zilch) so I'd go with WD RE2 500GB for $40 ea. more.
dump whatever you don't need, trash anything that is hogging space and is just temp file or useless cache. Web browsers can leave behind a ton of small files eating up tens of MBs.
Use SuperDuper to backup/clone your drive.
Disk Warrior 4 to repair (after it gets to 15% free, or just forget for now).
A 250GB drive formats to 240GB and you have ~3% free it looks like.
For every data drive plan to have two backup drives.
Keep your boot drive to 40% used.
And your data drive to 60%.
Backups can go a little higher.
Drives are cheap and inexpensive, especially for the space and performance. And they have improved SATA over the years it has been out.
By doing a backup followed by erasing your drive, and then restoring it, using SuperDuper, which optimizes the organization, skips copying temp files that aren't needed, it also defragments your files. I would do backup daily to different sets that you "rotate." And before any OS update. And do the erase and restore probably every 2 months.
Make sure you keep one drive partition somewhere that is just your disk utility emergency boot drive that is not a copy of working system, used for doing repairs like running Disk Warrior and Disk Utility.
You may need to repair; backup; even erase and restore your external drives. Rather than spend on vendor made case, just pick up a good FireWire case either with drive, or bare (and add your own). I think it'd add 500GB FW drive though.
Why?
To begin backup of your current drive. To leave your other FW drives "as is" for now.
Then install a new internal 500GB drive as well so you now have a good current backup, and you have moved your data off 250GB to 500GB. If anything happens, you have one off line FW backup.
Then begin to clean up, organize, and get your FW drives working. It sure sounds like they have had some directory or file problems.
You can find a lot of Firewire and SATA drive choices over at OWC:
http://www.macsales.com/firewire/

Need help with ext. SWF and XML

I'm trying to create an External SWF to load into my main
site (photography).
Home | Portfolio | Published Work | Bio | Contact
The SWF I want to load externally is Portfolio because it has
5 sections
Those 5 sections are:
-Editorial
-Adventure
-Fly Fishing
-Multimedia
-Weddings
I'm looking to keep this dynamic as possible, but I'm one of
those guys who doesn't write code from scratch, but knows AS well
enough to modify a base or a generic template if ever given. It
would be easier to use one subsection as an example, which could be
applied to all others.
e.g. "Fly Fishing" 1-Main container; 5-10 thumbnails (1
dyanamic thumbnailcontainer)
- I don't know XML (but can modify it). basically having an
ID tag for each image, possibly dynamically generate a thumbnail
too. Also have a spot for dynamic text to load in (captions with
multiple text lines for images upon onRelease - maybe this could be
it's own MC that loads on top of the main photo container)
- on (release) on a thumbnail: there would be a little
information icon that would appear. If you mouse over, it would
overlay a layer over that specific ID photo, and the text appear.
RollOut it would fade out the layer above that specific ID photo.
- Transition: FadeOut/Blur/Exposure Blur, something
interesting to that nature.
- Thumbnails: is it just easier to create thumbnail images
manually, and just create a separate container?
- Image folders: I would imagine each section would have
it's own watch folder. For example "Fly Fishing" would be a folder
"/swfImg_flyFishing/", but perhaps having one XML file.
- XML file details
id
location
caption summary
title
As you can see, if I had one template to build off of, I
could repeat it self for the others. I need help and if there is a
flash component (free or purchase) that does at least 70% of what I
need, please share information. thank you!Portfolio

I know doing a pushback to the client requires Flex Data
Services, but since I don't use FDS I can't tell you exactly how.
But look in the documentation about "pushing" data to the client.
Once you've figured out how to do that, you can trigger that push
once you've finished editing the xml file. You may want to ask over
in the FDS forum.

Need help with WRT54G installation

I just replaced a BEFSR41 with a WRT54G v.8, and came across an installation problem. I had no problem manually installing the BEFSR41 by following the Start Fast instruction. Since the WRT54G didn't come with a Start Fast document, I used the CD instead. After connecting the router to the PC (winXP), and the modem to the router, I kept getting a message about not being able to connect to the Internet. But in fact I was connected, and could access the Net fine. Is there something need fixing? Perhaps another factory reset? A few other questions:
- When I tried to print the settings, I was asked to install a printer. But I already have three printers installed. How can I print or save the settings?
- After exiting setup, browsing 192.168.1.1 showed a blank page. ZoneAlarm was disabled, and all other pages worked fine. What is going on?
- My firmware version is 8.00.2. Should I upgrade it.
Once I get these resolved, I have some very interesting speed test data to share.

Update. After factory reset and firmware upgrade, I followed the manual installation suggested in the archive here:
http://forums.linksysbycisco.com/linksys/board/message?board.id=Wireless_Routers&message.id=146133&query.id=553973#M146133
Now things seem a lot better. The firmware rev is now 8.00.8, and I can access the 192.168.1.1 page. Please let me knwo what else I should check. Still have to shut down ZoneAlarm to browse with Firefox.
I'll repeat the speed tests and report later.

Need help with configuring web root and root url URL

Hello Folks,
I have been trying for a while to the flex 4 tutorial which asks you to connect to a mysql database. I have been able to configure the DB but cannot figure out what my web root and root url should be. Is there a web service that needs to be deployed or started. Would it be the IP address of the database that I created ( I tried that ) . I get the idea that an apache service must be started somehow on my flex environment and then I must find the root of the apache server. I dont see an apache directory anywhere. I am finding this difficult to know where to begin.

Hi,
First you need to be running a web server on your computer something like wamp/mamp is usually the better choice as most people have had the best success with this server setup(and it has all the current services like php and myssql)
When you use the wizard the path to your webroot is usually whre you located the wamp/mamp install, for windows it maybe something like c:\wamp\www not 100% sure about macs but I think the 'www' folder on a mac is 'htdocs'.
your url is either http://localhost or http://127.0.0.1.
David.

Need help with hp photosmart c8180 and wep code

Hello,
I am somewhat new with computers. The printer I have is an old one. HP Photosmart c8180 . When i followed the wizzard set up
options I entered the wep that is on my lap top(also an HP) and that code was accepted by the printer, however, it will not print from the lap top everything says it is offline and in que. I cannot find a trouble shoot option or anything. Printer still reads "connected". Can anyone give me some ideas?
Thanks...
LR

hello nurselulu67, I don't know why you were not able to print. Could you run the Print Diagnostic Utility in the link below?
http://www.hp.com/go/tools
edit: change the link. easier to remember
Though I work for HP, I'm speaking for myself and not HP. I'm just trying to help with my limited knowledge
**Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.**

Need help with Olympus E-M1 and ACR 8.3 Results

Hi:
1. I'm fairly familiar with photoshop and ACR, but definitely not an expert.   I'm also very familiar with the Olympus RAW files since the E-5 (I've owned the E-5, E-M5 and several Pens); I now recently purchased the E-M1 and I've been having problems getting decent images out of the RAW files (compared to the prior Olympus RAW files).
2. Problem: it just "feels" that the overall tone curve is more abrupt, especially in the highlights.    With the prior Olympus RAW files, the transition from moving the exposure slider to the right and then getting blown out highlights was more gradual;   there just seems to be an overt decrease in "headroom" when dealing with highlights in the E-M1 RAW files.   I know this makes no sense in that the dynamic range is supposed to be greater with this camera compared to the prior ones.
3. Problem: In relation to the above issue, it also seems that the highlight slider is not as specific as it used to be in that when I move it to the left, more of the histogram seems to be affected as opposed to the bright / highlight region.   It now seems to basically counteract any adjustments made to the exposure.   Again, this may be my imagination but it just feels this way.
4. Problem: In relation to the above issue, the other strange observation I've had is that although the histogram of the image shows no clipping, the image may have very bright areas with almost imperceptible detail;   when I click on it and view that data point within curves, it shows it to be well below 255.    In my lame flower shot example (it's not a good example but I couldn't find anything else right now), I would have guessed that in the brighest petal area, that it would be something like 250, but it's only 220.   But when I zoom in, there's really no texure or detail or data.
5. The above issue in re: highlight rendering and control may or may not be related but it's the first time, I've been having issues and I've never had such problems with either ACR or prior Olympus cameras and thus I'm wondering if this is some issue with how ACR interprets the E-M1 file. I did do some comparison with Capture One 7 and that does a definitely better job of highlight recovery in that it seems to more preferentially target just the highlights and definitely does a better job with color rendition.   I have Olympus Viewer 3, but it's so slow and lame, that I haven't done much testing with it.   Any thoughts and advice much much appreciated.

Also, you might want to upload your raw file, a full-size JPG of what you posted, above, and an example from C1 to www.dropbox.com and post a public link, here, for others to experiment with.

Need help with wrt54gs v7

i think my router is dead but heres the info
the 1-2-3-4 ethernet lights are flashing and the internet light
ive tried holding down the reset button for 30 secs and nothing happens
computer doesent recognize it and i cant get any type of connection out of it

i really hope someone can help me with my situation that i'm in. My WRT54GS v7 been acting on me. I had a network establish on it connecting to my Xbox 360. When i switch different game systems i disconnected my game adapter and the router from the modem for a short period. Later i connect everything again and it went fine. I just changed security settings and tired to reconnect my game adapter back to the xbox 360 and nothing happen. It couldn't find the router. Later after several different trial and errors. It found it. Still couldn't connect. First the network and then the IP address stop the game adapter from working couldn't connect fully to the router. so i went back on trying to set the router to allow the game adapter in. Change the settings back to normal and then a message about detecting new changes makes this your defalut settings so i tried , but now couldn't detect the router ( even though it's right there not even 3 feet away). So i did what i was told to my the Linksys advisor to detect the router. Rest 10 seconds , connect, wait 30sec. , click next. I went to help and followed more instructions there. I reset the router several times. I uninstall and reinstall, went to web site to go to factory default. Tried on the game adaptor the reset, type manually on xbox ,but to no avil have i succeed. I also went online and tried these commands. Ipconfig/ renew, release, all(for info). I need a miracle so please can someone help me on a permant fix. Since resetting, reinstalling, refactory defaulting doesn't seem to work..Also how can iconnect my game adapter to it. I used the set up for both router and game adapter and i'm still stuck where i am. :[

Hard drive crash need help with new iTunes load and backup files

I have looked through the posts and not found my situation.
I had my iPhone synced to a PC computer and the hard drive crashed. I had an extensive library in iTunes, but none of the music was purchased online so I can't simply download it again. It was all from CD's, many of which belonged to friends. I now have an iMac. The music I like is still on my iPhone, but not on my new iMac. When I try to sync the iPhone with my iMac it wants to delete all the music on my iPhone. Is there any way to copy the music off my iPhone first - so I can add it back into my iTunes library?

Yes, luckily I have been in this situation.
You can download a free application that will take your music from your iPhone and place it onto your Macintosh HD.
One of these should suit your needs:
http://www.macupdate.com/app/mac/19890/ipoddisk
http://www.wideanglesoftware.com/touchcopy/index.php?gclid=CPjvvOiyr6gCFaNl7Aodm h6QIQ
http://www.headlightsoft.com/detune/
I hope this helped.

I need help with WRT54G v. 4 and xbox

Similar Messages

Maybe you are looking for