I need hepl about the unlocking, im from bolivia and im going to the united states but im going to be just one day at the mall at orlando and i need to know how many time takes the unlocking for Bolivia an if it has a extra cost,please help
im tlaking about the iphone 4s, im going to be really grateful for the help bye
Please clarify what you mean. Do you already have an iPhone? If so, and it came from the US and is (presumably) carrier locked, you're out of luck. NONE of the US carriers will unlock iPhones. There are no exceptions.
The unlocked iPhone 4S is not yet available in US Apple retail stores. All phones sold at retail in the US are currently carrier locked.
Similar Messages
-
I had to make this new Apple ID because I can't access my old one.
I forgot my password to my original Apple ID so I followed all the instructions on iforgot.apple.com
After I got the email confirmation saying that my password was successfully reset, I tried out my new password but it kept saying 'Your AppleID or password was entered incorrectly.'
I did this numerous times before. I even tried to get help from Apple Support through email but no matter what I did, it was useless. Please, anybody, help, I'd still like to use my old Apple ID. Thanks.I seen this many times, and in just about all cases, it's the user resetting a different AppleID than what's being used for the iTunes account.
-
How many time take the airport express in the configuration ?
My airport express don't complete the configuration
Hi wsantanasuarez,
Welcome to the Support Communities!
The article below may be able to help you with this. You may need to reset your Airport Express:
Resetting an AirPort base station FAQ
https://support.apple.com/kb/HT3728
Cheers,
- Judy -
Hi,
My son foolishly pressed a single digit till it just filled the text box of the passcode. Now i dont know how many times he has pressed it. If I can know the charcter length, or how many digits can just fill the text box of passcode, I can unlock my ipad2. If anyone reading this has ipad2, he can do the same thing and count how many digits will just fill the text box. I will really appreciate the help.
ThanksYou can put the iPad into Recovery mode and Restore it. See this link and note the sentence commencing, 'If you restore from a different computer.... ' down near the bottom of the page.
http://support.apple.com/kb/HT1808 -
Does anyone know how many times a newly purchased product (MB Air 2014) can be exchanged within the 14 day period? I feel like the MB Pro would be a better fit for me, so I wanted to exchange my Air for the Pro. But also, if I end up not liking the Pro and want to go back to an Air, would I be permitted to do so with another exchange? (all still within the 14 day window after purchase of course).
Also, are there any specifics I need to know in order to return my product and get a new one? Obvioulsy, I would be sure to remove all of my personal files, music, etc...but is there anything else I need to do?
And lastly, and im sure this question is irritating to you Mac wiz kids out there, but are the two models im comparing really all that different? I just cant make up my mind and would love some pointers/suggestions/tips/info to help me figure out what model is best for me (the apple employee that was helping me in the store was actually not that helpful at all, if they were I wouldnt have to ask this question on a discussion board). I do tons of multimedia things and download and enjoy music, tv shows, movies, all that stuff..and I used to love to burn dvds and cds (obviously cant do that with the MB Air now which totally bummed me out ). Which model does anyone think I should stick with? Id greatly appreciate some opinions! Really tho, help me out ppls! I'd love some helpful advice! I sometimes have problems making big/important/expensive decisions lol I just really want to make sure i am getting the best model for all of my daily tasks and all of the things i actually do regularly on my computer.
Oh, last lastly- I cant afford anything more than a 13" STANDARD MacBook Pro at the moment...soooo the Retina display is unfortunately not an option for me.
Which is also a big bummer.but i think i can get over it...or beg someone to loan me an extra $200 lol
Someone....Annnnyyyone....Pleeeeease....Heeelllllllp....
ThanksJust play with each and figure out which one you want. I believe they only allow 1 exchange unless it is a defect issue. You can always return the exchanged item and rebuy what you want if they will not allow you to do multiple exchanges.
But again, you need to really figure out which one you want. -
I have a presentation to make to a customer and need to know how many educational apps are there for the iPad/iPod? More specifically special education apps.
ThanksKeep in mind as well that not all apps are "created equal". Some are really good, and others are not very good. You might also want to look at some education sites for recommendations. An example of a general iPads in education forum is
http://ipadeducators.ning.com/
but I imagine some exist for special education needs as well. Our healthcare organization is using some apps for working with autistic children and find them very helpful. -
In ST03 , how can i see the Query name, user id,how many times executed the
HI Experts,
In ST03 , how can i see the Query name, user id,how many times executed the query.
these details how do i get from the above transaction.
EX:-if there is one report name X,I want to know how many users had executed X report today,weekly,monthly.
ex:-query userid total number of execution
sales order 0000555 5 times
custmer 05855 2 times
fast reply will be appreciated,Hi,
Look here:
http://help.sap.com/saphelp_nw04/helpdata/en/3b/54df4204892a78e10000000a155106/frameset.htm
Also check these:
http://help.sap.com/saphelp_nw2004s/helpdata/en/2d/b8be3befaefc75e10000000a114084/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/25/ece73a39e74d27e10000000a114084/frameset.htm
Hope this helps..
Bye
Dinesh -
Basically the title explains my question. How many times can the photos hop code be used? Like can I download it on one computer then later download it on a different computer?
You're allowed two installations/registrations. Anything above that requires deregistration on one of those computers.
Take note that if this is Photoshop CC, it's as easy as signing out on a system; there aren't any serial numbers involved as it's all tied to your Adobe ID. -
When I got my new iPhone and was trying to switch everything over I accidentally set up a new icloud account with one email and had one on my old iphone with another account. Does anyone know how I can merge the two accounts?
You cannot merge Apple IDs but you can go to Settings > iCloud and 'Delete Account'. When prompted to turn off documents and data, choose the only option which is Delete from my iPhone, but on the other prompt for Contacts, Calendars, etc you can choose 'Keep on my iPhone' Then once the Account is Deleted form the iPhone, log back in with the correct Apple ID and choose Merge when prompted. This will merge your data from this iPhone with that iCloud account effectively putting your devices on the same account.
-
How many times does the JDBC sender adapter retry ?
Hi All,
How many times does the JDBC sender adapter retry in the ' Retry Interval' specified .
I know that it retries after the time specified in the ' retry interval' , but if it again fails after the first retry will it retry again and again .And while doing it will it block the next Select query which should get executed.
Thanks & Regards,
RahulHi,
The no of times to be retired on failure of message is default 3 times.
You can set this in Visual Administrator->Server->Services----> SAP XI Adapter
Thanks
Swarup
Edited by: Swarup Sawant on May 30, 2008 7:19 PM -
I'd like to know how to change my profile picture that appears on mail threads on my mac. please help.
There may be other methods, but below is how I change my email photo.
Here is how to change your Mac Mail email photo in Mountain Lion:
Open the App called "Contacts". Type your name in the search field. Your contact info and photo should appear. Click on your photo. You now have some photo options. I use the "Recents" tab, and simply drag photo files from Finder into that window in Contacts. Drag and drop.
If you have trouble finding yourself in "Contacts" you can also get there by doing this:
Open one of your sent messages. Double click your photo in that message. This opens another window with your photo in it. Double-click that photo. This should open your contact information in the Contacts App.
Hope this helps.
-Craig -
How many times should the computer cycle on-off when doing a factory reset?
I have a Toshiba A665-S6065 which can not boot. Yesterday I tried the Auto Recovery by holding the 0
while booting, and following the default instructions. It seemed to complete without errors. But the computer
will still not boot. Today, when reading the instructions, it said to expect the computer to cycle on and off severa
times. So how many times? will there be any propmts or messages? How long should the entire process take?
How long should the computer be off before it turns on again each time? I think I might be screwing things up
by intervening and trying to start the computer myself because it isn't clear to me what should actually be happening.
Could someone please tell me what to expect before I start looking at possible hardwre problems?
BTW, I can access the Setup and Boot Menu.
Thanks,
kjdroid
NEW info:
Now when I boot while holding the 0 key, instead of going directly to the Recovery Wizard, it goes to the
Windows Boot Manager.
from there the options are Windows Setup [EMS enabled]
and Windows Memory Diagnostic, as well as the F8 option for advanced options.
If I select Windows Memory Diagnostic I get
File: \boot\memtest.exe
Status : 0xC000000f
Info : The selected entry could not be loaded because the application is missing or corrupt.
If I select Windows Setup or F8 followed by normal windows startup or startup in safe mode then
I get the following sequence of events.
Starting Windows with the Windows logo.
then the blue screen
Then to the Toshiba Recovery Wizard, where it partitions, and does the CRC and then prompts to press
finish to restart the computer.
Either the computer does not shut down, or it stops and starts very quickly because all the lights cycle
on and off but it does not appear that the start/stop light actually ever turns off.
Then I get the Starting Windows with Logo again.
Then the Recovery Wizard comes back but only with the screen about partitioning. It does not
do the recovery and CRC this time.
Nextis the Toshiba Logo reappears again with the options for F2 or F12 for the Setup and Boot Menus.
Finally, I get a blue screen and it appears nothing else is happening. I let it sit for 30 minutes before I retry, because I am not sure what is supposed to be happening now.
Also, one of my attempts, I got as far as the messages:
Setting up the Registry
Starting Services
Applying System Settings
Will continue after restarting your computer
Is preparing your computer for first use.
But then again, it just goes into the blue screen state until I finally decide to shut things down.
Am I being premature or should I let the blue screen sit there for a few hours while work is being
done in the background? I don't hear any sounds from the computer that would indicate any type of activity.
Thanks again
kjdroidActually, it's kind of hard to tell you what to replace. If you have a spare hard drive laying around, go for it. It also could be memory issues (I have the same model as you) & it was my sister-in-law's notebook before I get it. The notebook had several memory dumps that CCleaner found & deleted when I was working on it.
I told her that I would re-install it for her to make sure there no viruses or such. After backing up the computer, I proceeded to what was supposed to work, pressing "0" at startup to no avail, then booted into the area where the system restore, command line repairs & such were, & there was the option for a factory reset, the last option. I chose that one, & like you stated, it rebooted numerous times, until finally it was through. Longest factory re-install I've ever done.
What led me to believe there were memory issues was during the first round of updates, it BSOD'd, another memory dump was found by my portable CCleaner. It still had the original Samsung PC3-8500 memory, so I took the memory that shipped with my MSI (PC3-10600) & installed that, then not only was all fine, it was noticably faster. Once I got it fully updated & scanned with MBAM & the ESET Online Scanner (I always do this when installing or re-installing a computer), I removed my memory & placed hers back in, then returned it to her.
I ended up with it about 10 days later, she said it was still dumping. Needing a spare notebook, I offered $100 for it, ending up paying $150, but still came out way better than on eBay.
Once I got it, I placed the 6GB RAM back in there that I had, & also replaced the HDD with a extra Crucial M4 that was laying around. Right before swapping drives, I ran HD Tune (free) on the original, there were yellow attributes, meaning that it had issues pending. It's a 500GB Seagate HDD that runs at 7200 RPM. Just so happened, I lost a 500GB Seagate Barracuda desktop HDD (7200.11) less than a month ago. Booted the computer, the screen stated "No Operating System found".
So it could be either the HDD or memory (RAM). Or worse yet, the MB itself. Has it been dropped? Notebooks are fairly durable, but they don't take to being dropped very well. Does it run hot? If so, there may be severe dust buildup that's causing it to overheat, that will make it BSOD. My guess is that's it's one of the first three that I mentioned above & if it's the MB, forget it. Prices are too high, even for used ones & in a notebook, it's basically a total teardown to replace it. If it's a new MB, it may cost between $200 to $400, depending on popularity of the model. That's too much to pay to repair a computer built in 2010.
I'm trying to give some suggestions here, based totally on personal experience on my & other's computers that I work on. However, online it's a cat & mouse game. I don't want to tell you to purchase another HDD unless it's almost 100% certain that's the issue. Which is why I asked if you have a spare earlier. Also, try reversing the position of your memory sticks (a 5 minute job), it's behind that lid close to the battery underneath the notebook.
Post back if you need further assistance. Someone else may have other ideas, so follow the thread.
Best of Luck,
Cat -
How many times does the VideoEvent.READY event get fired?
Hello,
I have 2 videos I am loading via VideoPlayer.load(url). I
have setup eventlisteners(VideoEvent.READY, onVideoLoaded) for each
video so when the videos are loaded my function is called. How many
times should my function onVideoLoaded be called? I assume once for
each video. This is not the case because my function is called
multiple times for the first video and not called at all for the
second video. Can someone to me why? Is this a bug with AS3? Any
help would be appreciated.
Regards,
NilangHi,
The no of times to be retired on failure of message is default 3 times.
You can set this in Visual Administrator->Server->Services----> SAP XI Adapter
Thanks
Swarup
Edited by: Swarup Sawant on May 30, 2008 7:19 PM -
HT201401 How many times can I enter a password if my child has forgotten it?
My child set a password on a disconnected phone that he was using as an ipod. I am trying to unlock it. How many times can I enter a wrong password? Is there a limit and what are the consequences?
Thanks!Depends. Passcode can be set to erase all data after 10 failed attempts. If you repeatedly enter the wrong passcode, your iPhone, iPad, or iPod touch will be disabled for longer intervals before you can try again. After too many unsuccessful attempts, you won't be able to try again until you connect it to the computer with which you last synced it.
-
How do you count how many times a if/when/for statement runs?
So this new program I'm trying to write is a changemaker (in euros for some reason). You enter a price of a product, amount paid, and it computes how much change you should get back in the form
[number] x 2-euro
[number] x euro
[number] x 20-cent
etc
Where the number is the number of that kind of coin they should get back.
Right now, I have it so that you enter price, and amount paid, and then I have a series of while statements that go like..
while (surplus > 2.00);
while (surplus > 1.00);
etc. If the surplus > 2, I want to add 1 2-euro coin to the count, subtract 2, and then recheck the amount and either add another 2-euro or go onto the next coin. Only thing is, I don't know how to count how many times a while statement ran until it was false. Or I could be looking at this the wrong way entirely. What's the best way to go about a program like this?Well I finally figured it out with lots of help from other students in the class. It was much easier than it appeared to be. Thanks for the hints everyone (especially joker for doing the coding for it) wow :D much appreciated ^^
Heres the code that I came up with and it works matches the assignment's example:
import java.util.* ;
public class ChangeMaker {
private static int changeA [] = new int [7] ;
private static float changeVar[] = new float [7] ;
private static int changeVarNumb[] = new int [7] ;
private static String changeNames[] = new String [7] ;
// initialize Scanner
private static Float getInput (String prompt){
System.out.print (prompt.concat(" ")) ;
Scanner sc1 = new Scanner (System.in) ;
return (sc1.nextFloat ()) ;
// put the change variables and change names into arrays
private static void moneyArray (){
changeVar[0] = (float) 2.0 ;
changeVar[1] = (float) 1.00 ;
changeVar[2] = (float) 0.20 ;
changeVar[3] = (float) 0.10 ;
changeVar[4] = (float) 0.05 ;
changeVar[5] = (float) 0.02 ;
changeVar[6] = (float) 0.01 ;
changeVarNumb[0] = 2 ;
changeVarNumb[1] = 1 ;
changeVarNumb[2] = 20 ;
changeVarNumb[3] = 10 ;
changeVarNumb[4] = 5 ;
changeVarNumb[5] = 2 ;
changeVarNumb[6] = 1 ;
changeNames[0] = (String) "Euro" ;
changeNames[1] = (String) "Euro" ;
changeNames[2] = (String) "Cent" ;
changeNames[3] = (String) "Cent" ;
changeNames[4] = (String) "Cent" ;
changeNames[5] = (String) "Cent" ;
changeNames[6] = (String) "Cent" ;
return ;
// calculate the change the user is going to receive
private static void calcChange(float diffAmount) {
for (int i = 0; i < changeVar.length ; i++) {
if (diffAmount > changeVar) {
changeA[i] = (int)(diffAmount / changeVar[i]);
diffAmount = diffAmount - (changeA[i] * changeVar[i]) ;
System.out.println(changeA[i] + " x " + changeVarNumb[i] + " " + changeNames[i]) ;
return;
// output
public static void main(String[] args) {
float itemPrice = getInput("Enter product price: ") ;
float amountTendered = getInput("Enter amount paid: ") ;
float diffAmount = amountTendered - itemPrice ;
System.out.println() ;
System.out.println("Your change is " + diffAmount + " euros") ;
moneyArray() ;
calcChange(diffAmount) ;
And the output looks like this:
Enter product price: 2.32
Enter amount paid: 5.00
Your change is 2.68 euros
1 x 2 Euro
3 x 20 Cent
1 x 5 Cent
1 x 2 Cent
1 x 1 Cent
Maybe you are looking for
-
COPA line item report, Number format -output type - object list(ALV).
Hi, I am preparing COPA line item report. I want to change number format (two decimal place). I did the changes in form level then I did the changes in drill down report as well and saved as save definition. But changes are not reflecting in- output
-
I have a 5th generation IPod Nano that I have registered to my ITunes account. I recently bought my daughter a 7th generation IPod Nano and have attempted to sync this new IPod to my ITunes account. A message continues to appear saying that it does
-
Too many columns for Custom report
Hi, I'm building a custom XML Publishe report, the O/P will be in excel format. Problem is that i have too many columns...around 30 which are extracted to excel sheet. How should i create RTF file with these many columns? Any suggestion? Database:10g
-
Something is wrong with Searching - Just Hangs 7AM UTC
Something is wrong with Searching - Just Hangs 7AM UTC
-
Table goes out of alignment in text box
I have created a very simple table in InDesign CS5 on Windows 7, like this: However when you start typing into a cell, it goes like this: To fix it up you have to make the text box slightly bigger or smaller then resize back to what it's supposed to