I need high resolution fequency counter for 732.4220 Hz

The Frequency define my adjuste.
I need a frequency counter or way to get frequency for a continuos
signal (TTL).
the Standar frequency is 732.4220 but i neead steps at least from
0.004 Hz.
I mean I nead most have the ability to see the diference for:
732.4236, 732.4220Hz, 732.4204 and 732.4187
Actualy we are using a counter model 53131A Universal Frequency
Counter from HP

Unfortunately I am unfamiliar with HP�s Universal Frequency Counter. You should be able to look up some specs on HP�s website or perhaps another community member has more experience with that specific counter.
I can, however, refer you to a link that discusses National Instruments counters. I believe that our counters may provide the functionality you are looking for. Good luck!
Craig H.
National Instruments

Similar Messages

Saving a logo as a .EPS file, need higher resolution than 75dpi

Hi, hope someone can help me
I have designed a logo & sent it to the client, but they have come back to me asking for it in a higher resolution.
Apparently the .eps file I sent to them was 75 dpi but they need 300 dpi
I have opened up the original .ai files & tried to save them in higher resolution .eps but there is no option in the .eps save as dialogue box to save at higher resolution. The only part that seems to mention it is in the Transpency section... Preset: [Medium Resolution] But it's greyed out.
Does anyone know where I am going wrong?
Thanks!!!
Jade

Should I tell the client it is fine at 75dpi??
It's very common for someone receiving an EPS to import it into another program, see the embedded For-Position_Only preview (which is a raster image) and think it is a "low res EPS."
EPS is a metaformat. It's like a box that can contain any combination of raster, vector, and/or text objects. So EPS itself, like an Illusrtator fle, has no resolution, because resolution in a metaformat is object-specific to whatever raster objects which may or may not be included. A single EPS file may contain a 300 PPI raster image, and a 150 PPI raster image at the same time. Or, it may contain no raster objects at all, and only contain vector paths.
Regardless of the actual content, when you save the EPS, a screen-resolution raster image is created and embedded. This is to provide the program which is going to import it something for the user to see onscreen.
When the file is printed to a PostScript device (EPS stands for Encapsulated PostScript), the device prints the full-res raster objects, the vector objects, and/or the text objects that are contained in the EPS.
When the file is printed to a non-PostScript device, only the low-res preview is printed, because non-PostScript printers have no "brain" to interpret PostScript content.
If you are going to provide EPS to your customers, you should have some idea of what they intend to do with it, and make sure they have at least some basic understanding of what it is.
JET

HT4972 I need a higher resolution in order for me to watch TV programs. Can you assist me in doing this?

I am in need of some direction on how to go about updating my iPad to allow me to watch TV such as HBO to go....

Your pad is fine. To watch HO go , download the app from the store. Note, you need to be an hbo subscriber, and your cable company needs to support the effort. Not all do.
Other tv outlets may have an app, such as CNN and espn The store is always a good place to start

I just bought a new samsung 22" monitor and after talking to them found out it needs higher resolution then displayed in my settings,text resolution is bad. do I take back or can this be fixed?

I just bought a new Samsung 22" monitor. The text resolution is really bad. After talking to Samsung, I found that the needed resolution is higher then what my Mini-Mac shows available. Can this be fixed or do I return the monitor?

Let's try again...
my cable goes from the "Thunderball" port on my mini with an adaptor to convert it to the regular cable
You mean the Thunderbolt port.
What Mac mini do you have? Apple menu > About This Mac.
What Samsung monitor do you have?
What cables are you using?
Have you tried holding Option and click the Scaled resolutions button in System prefs > Displays?

I NEED HIGH RESOLUTION PICTURES...

Does someone can tell me or recommend me a place (web site) where I can get good quality backgrounds, landscapes or just nice pics? I need them for my projects. The ones I have is very poor quality, ther are betwwer 2 to 200 megabytes, no more. I need between 10 to 20 or more mega bytes I guess.
And I have another question: How can I get good quality when I mix my pictures after scann them through my Epson Perfection 4180. When I scann my pics on first time they are betwen 1 to 5 mega bytes, which is a pretty good quality. But after I use Photoshop elements 3 and mix them with some templates, the qualiti goes down, between 100 to 800 megabytes, no more. Maybe I use a wrong way to save them. I need help, Please.
Albert

Alberto:
I believe you're mixing your megabytes up with kilobytes. An 800 megabyte (MB) file is nearly 1 gigabyte in size you would not be able to work with it in any program.
What you want to strive for is the total number of pixels in the file. If these are for printing what size prints do you want. For printing on an inkjet printer 300dpi would give you very good results. So for a 11 x 14 print you would want an image that would be 3,300 x 4,200 pixels. In working with that image in PSE you set it to 8 x 10 the dpi would change to 420dip and keep the same number of pixels in the file.
So it depends a lot on the intended use, i.e. size if printing, as to how to scan and what size background images you need. If you'd post back with some of these answers we can more effectively help you.
OT

AIR for iOS: Severe performance drop using "high resolution" published app on retina iPhone

I have created a very simple test app the simply draws a line from the previous to the current mouse/touch position after MOUSE_MOVE is detected. I published the app, stage size 320x480, in both "standard" and "high" resolution using AIR for iOS and added each to two different iPhones, iPhone 3GS and iPhone 4S. I published again, stage size 640x960 in standard and high resolution and placed on both phones.
320x640 Flash stage size
- standard resolution on iPhone 3GS: works as expected, no hitches.
- high resolution on iPhone 3GS: works as expected
- standard resolution on iPhone 4S: works as expected
- high resolution on iPhone 4S: hangs occasionally and predictably for a half second or so once 20-30 points have been added to the drawing. Of the 4 tests at 320x640 this is the only one that displays at high res.
640x960 Flash stage size
Everything was the same as above. The only test here that diplayed at high res was the high res publish on the iphone 4s as expected. Which showed the same poor performace as above.
Perhaps this has something to do with the upscaled application trying to keep track of mouse position but I'm stumped. Any ideas?

I create an app for kids that draws using MOUSE_MOVE, KidFunKit. It's a retina display high-res app, using AIR 2.6 I got performing issues, after I couple of lines were drawn. Using AIR 3.0, it works nice. Obviously if your frame rate is 60 ... you'll expect lack of performance. You may try Starling Framework based on STAGE3D if you want the most of AS3.

Need to unreserve a counter in a finite pulse train generation

Hi. Let´s introduce my application first: I´m trying to generate a N-pulse train with the M series PCI-6221, in order to achieve a high frequency clock for an SSI transducer. That´s why i can´t use a software generation (because of the high frequency) and i have to use a finite pulse train. Besides, I would need to use another counter for a variable and finite count (but not simultaneously). The problem is that, as i think i have understood, this finite pulse train involves the two counters working together, so I can´t programm another task with that resources.
My question is, Is there any way to do the finite pulse train generation, unreserve the counters, wait for a finite count to finish and so on?
Thanks.

Hello,
My knowledges tell me that you need two counter to generate a finite pulse train.
The first counter generates a pulsed of desired width and the second counter generates the pulse train which is gated by the pulse of the first counter (Counter 0=Pulse Generation, Counter 1=Pulse train generation).
However, the finite pulse train generation and the continuous pulse train generation seem similar. The key difference is the generation mode from continuous to finite and the use fo a DAQmx Wait Until Done vi instead of a loop to monitor user input. From a point of view of the hardware there is a difference between the two. Continuous pulse train generation requires only 1 COUNTER.
Maybe you can try with a continuous pulse train generation and with this method you have another counter to do a finite count.
Regards
DiegoM.

Satellite M30:I need more resolution

Hi,
I have M30, XP system.
The screen rosolution of 1280x800 pixels is not enough. Is there a way to increase that resolution?
(Virtual resolution are not good which need you to scroll the screen...)

Hello
The fact is that the physical resolution of a TFT display is fixed based on the number of pixels the screen has. In your case this is 1280x800. Higher resolution is therefore not possible. One can lower the resolution but then the image is stretched and the image will appear a bit out of focus. This is also true for an external TFT screen. If one needs higher resolution one must buy a PC with higher resolution, of course the price will also be higher.
Like you know the max. resolution of the laptop is always shown at the specification and if you want to buy a notebook with higher resolution you must check it before you buy it.

How do I put high resolution pictures on my new iPad?

So I picked up a new iPad and I love it but when I try to put high resolution photos (2048x2048) for the wallpaper on it it resizes them to 1024 for example... This happens via email and when I download them from a website.
HOw do I get high resolution photos on my iPad to take advantage of the awesome screen?

Sync photos from your computer. If the new iPad is like the iPad 2 the photos will be sized to display at the screens resolution. Thus they should look stunning on your new iPad.

Since syncing with iCloud all my photos in my photo app are much lower resolution than they were before. Can anyone explain what happened an how I might get back my high resolution photos?

Since syncing with iCloud all my photos in my photo app are much lower resolution than they were before. Can anyone explain what happened an how I might get back my high resolution photos?

Thanks again.
Unfortunately I don't have iPhoto (running Windows).
I did, however, figure out a work-around.
I created an empty directory on my computer, and told iTunes to "Sync Photos from..." that empty directory. This deleted all the photos from the iPod (go figure).
I then set the "Sync Photos from..." dropdown back to directory that actually contained all my photos, and sync'd again.
And, yes, they all loaded onto the iPod at their better, higher resolution.
Thanks for all your help. Photos (and wallpaper) are perfect, again

Need to get the count based on the column availability

You get a set of table names from a query, say
select table_name from all_tab_columns where column_name like 'DC_I’;
TABLE_NAME
A
B
C
Now, for the above set of tables (A,B and C), you need to get the count(*) for a single dc_i value (say XXX DC)
In simple words, its like framing the following 4 separate queries into one single one:
select table_name from all_tab_columns where column_name like 'DC_I’; (Based on this o/p, following 3 queries..)
select count(*) from A where dc_i=XXX;
select count(*) from B where dc_i=XXX;
select count(*) from C where dc_i=XXX;
Thanks

Are you looking for this?
satyaki>
satyaki>select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
PL/SQL Release 10.2.0.1.0 - Production
CORE    10.2.0.1.0      Production
TNS for Linux: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
Elapsed: 00:00:01.04
satyaki>
satyaki>
satyaki>
satyaki>SELECT table_name,
2         DBMS_XMLGEN.getxmltype ('SELECT Count(*) c FROM ' || table_name||' where '||column_name|
|' = 10').EXTRACT ('//text()').getnumberval() tot_rows
3 FROM all_tab_cols
4 WHERE table_name in ('EMP', 'DEPT')
5 and   column_name = 'DEPTNO';
TABLE_NAME                       TOT_ROWS
EMP                                     4
DEPT                                    1
Elapsed: 00:00:01.00
satyaki>
satyaki>
satyaki>
satyaki>select count(*) from emp where deptno = 10;
COUNT(*)
         4
Elapsed: 00:00:00.00
satyaki>
satyaki>
satyaki>select count(*) from dept where deptno = 10;
COUNT(*)
         1
Elapsed: 00:00:00.00
satyaki>Regards.
Satyaki De.

Rows count for repetitive groups in tablix.

Hi All,
To make the story cut short, i will going to explain my scenario:
i have a tablis contro and i garoup it by a field say "Field1" which contains A and B values,
in my case we divide groups in two parts if it has rows more then 200.
so, my report output and my required is below :
Current Output -------------------------- Required layout
here 200, 20, 30 are number of rows per group.
now my requirement is if a group is repetitive
i need the all rows count for that value like in above case :
Header text of Group A should be like : A(220) i.e 200 +20
please help me on this...
it is very urgent for me
shashank

hi Simon,
thanks for reply, sorry, i skipped to mentioned that i have to provide multilevel grouping also, like
Group By: Field 1 -> Field 2 -> field3
so, to achieve my requirement by Sql as solution has no problem if i do not have multilevel grouping, but i have to provide that and in that case the query will be like,
“select distinct [column1],[Column2],[Column3],count(*) as rn from [table] group by [column1],[Column2],[Column3]”
which is problematic in my case.
so for doing this i need a solution apart from sql but by using SSRS Report end.
Thanks again.
Shashank

How do I upload to Facebook in High Resolution using my iPhone. Do I need an app? Which ones are best for the job? (I know how to do it on a PC :) )

How do I upload photos to Facebook in High Resolution using my iPhone. Do I need an app? Which ones are best for the job? (I know how to do it on a PC )

100pat wrote:
Thanks, I can do it fine from my Windows desktop PC, I just want to know how to do it from an iPhone4
Like I said before ask facebook or look at their support site to see if that is even a feature.

Is the optional high-resolution 1680 by 1050 needed for HD TV?

Is the optional high-resolution 1680-by-1050 pixels (vs. the standard 1440-by-900) needed to view HD TV on a 15" MacBook Pro with i5 processor?

No. You can view HDTV at reduced resolution on any MBP display. The 17" models are the only ones that can display 1920 x 1080 HDTV at its full resolution.

Low resolution Illustrator file needs to be changed to high resolution?

I created a logo for a client in Illustrator that they were going to use on large format banners. The file contained one Photoshop image that I imported into my Illustrator file and changed into a vector object. I also outlined all type. The only other items on the logo were colors done in CMYK. The client now says the overall image was done in 'low resolution' and needs to be in 'high resolution' but I'm confused about what part of the design she would be referring to (as, as far as I know) there are no pixels that would pertain to resolution - (unless the CMYK color builds translate into a problem?).
As she is a new designer for a client (my friend) I'd like to get some feedback before I just ask her what she's talking about and embarrasing her (or me).
Any thoughts? Thanks.

I'll note... after reviewing my file, the only other thing I noticed was under Document Setup, the Transparency preset was at 'Medium' instead of 'High' resolution, but here again, I thought this was a non-factor because as far as I know there is no 'transparency' (no jpegs, effects, etc.)... just the vector items that I noted.

I need high resolution fequency counter for 732.4220 Hz

Similar Messages

Maybe you are looking for