I need HP4280 GPIB library for LabView 6i. Help.

Hi.
I am researching about reducing insulating material's capacitance with HP 4280.
Recently I got a GPIB card, but I have no idea about it.
I need help, so far I have read the manual and etc., but I understand nothing.
Our lab has a LabView program (6i), a friend of mine said "If you have a HP4280 library, you will use it without difficulty."
So I am posting this.
If someone has a library about HP 4280 for LabView 6i, please let me get it.
Thank you.
P.s. : The CD has library for many other machines but don't have for HP 4280, the nearest library was HP 4284.

I performed a quick search, but I could not find an exact driver for the HP 4280. There are some drivers on www.ni.com/idnet that are close and may work with your instrument. Just search for HP and meters. All drivers can be downloaded on our site for free.
In addition, HP seems to sell a driver that covers a range of instruments, including the 4280. Here's the link I found: http://eesof.tm.agilent.com/products/85190a_ordering.html. I would recommend contacting HP for more information.
Good luck with your application!

Similar Messages

Do I need "nilm.exe" file for labview to run properly?

I have some problems with the "nilm.exe". Sometime it create a lot of other file in Windows tak manager and it lock completely my computer. Do I need "nilm.exe" file for labview to run properly? Can I remove it from my computer ?
thanks in advance for your reply

NILM.EXE is the NI License Manager for Remote Panels. If not using Remote Panels then you do not need to use NILM.EXE. The following webpage shows how to disable nilm.exe:
http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/581a81c57ac0c10b86256b5a005f2975?OpenDocument
Chris_Mitchell
Product Development Engineer
Certified LabVIEW Architect

I try to make update for my iphone and start showing itunes need to be connected and never start and i connect my phone on itunes but it say need to be format for phone .please help me .

I try to make update for my iphone and start showing itunes need to be connected and never start and i connect my phone on itunes but it say need to be format for phone .please help me .

Hello Huss87bash,
This screen indicates that the device is in recovery mode, and must be restored in iTunes before it can be used again.
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Once the device has been restored, you should be able to restore your device from a backup to replace all of your content and settings.
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/HT1766
Cheers,
Allen

Need spartan 3e driver for LabVIEW FPGA 2011

Hello,
I'm looking for Spartan-3E driver for Windows 7 LabVIEW FPGA 2011.
Thank you

Thank you for all the helps. I do appreciate that.
By the way, I'm wondering the latest driver on NI is used for Labview FPGA 2012 or 2012sp1?
Just in case our department would purchase the latest version of Labivew in the near future.
Thank you again and have a nice day.

Convert RudShel drivers library for LabVIEW 2011

Please, convert following library with Rudnev-Shilyaev ADC drivers:
source version is 4.0.2
target version is 2011.
List of 4.0.2 VI's in this lib:
GetFreq.vi
InitDMA1.vi
InitSINGLE.vi
InitSLOW.vi
PortIO.vi
PortIO_inp.vi
PortIO_Out.vi
Test.vi
Thank you!
Solved!
Go to Solution.
Attachments:
LIBRARY.LLB ‏372 KB

Hi,
Here it is in LV 8 readable in LV 2011
Missing a DLL file but I think you have this file.
Kees
Attachments:
LIBRARY.zip ‏45 KB

I need a new key for my keyboard - help please

Hi there. I've had my PowerBook G4 12" for just over a year. I love it and I want some help with the keyboard. I took off the top arrow key on the bottom right corner of the laptop. I did this because it felt like whenever I hit the key it wouldn't feel like all the other ones. It wasn't smooth and such. So I was trying to clean it I suppose. Now the key is off and that rubber thing that was under it is gone. Can I get this fixed? Thanks.
AIM - marksampson03

By the "rubber thing that was under it" do you mean the white plastic spring (known as the "scissors mechanism")? If so, you can purchase them individually here to fit yourself:
http://www.pbparts.com/shop/a123s.html
You can also get replacement key caps, if you're missing that too.
Just make sure you're getting the right ones for the 12" PowerBook you have (it sounds like you have what they call a "late model", which is what I've linked to above, but email them if you're unsure before you order).

Need to add superscript for text field--HELP NEEDED.

Hi Friends,
Is there any way to implement superscript and subscript text in Crystal? For example, I would like to superscript the portion (1) of the following string:
"Buy(1) or Sell(1)"
The only way I have found to do this is to put the "235" in a separate text field that uses a smaller font size, and overlay it into the gap that I intentionally left in the larger text field. For display and printing purposes, this works OK, but if a report containing these strings is exported to Excel, the text fields are exported as separate cells, which makes the exported report look funny.
I can create this string in Word, then cut and paste it into a text field in Crystal (which initially seems to work), but as soon as I click off the field, all the characters in it are converted to the same font size.
If this can't be done in the current version of Crystal, are there any plans for it to be implemented in future versions?

hello all,
the text interpretation for html or rtf in fields will not render superscript or subscript. the basic rule is that whatever you can format directly in a crystal reports text object, that's what you can have interpreted.
look up "text interpretation html" in kbase for a full list.
one option is to turn html passthrough on the server in question if this is a huge deal for you...if you want instructions on how to turn html passthrough on, they are located in the webelements user guide at
http://diamond.businessobjects.com/node/255
after doing so, you'd drop the database field into a formula and any html in the database field would be interpreted.

I have an iPod classic that syncs my entire library, I'd like to buy a smaller iPod, a nano maybe for the gym. Can I use the same library or do I need to set up a new library for the 2nd iPod? Is that possible? I mean for one to have 2 iTune librarys?

I have an iPod classic that syncs my entire library, I'd like to buy a smaller iPod, maybe a Nano for the gym. Would I need a 2nd iTunes library? Is that possibly, I mean for one person to have 2 iTune librarys/accounts?

Woodblock 3 wrote:
Would I need a 2nd iTunes library? Is that possibly, I mean for one person to have 2 iTune librarys/accounts?
In other words, no. You don't need another iTunes Library for your new iPod
Another iTunes Library, that's only if someone elses music is mixed in with yours and you want to create another Windows user account with their music in it.
The iTunes Library is the master vault containing all your content, from there you create playlists or smart playlists specially tailored for the smaller iPod's storage requirements.
For instance if the iPod can hold only 2,000 songs, then you create a smart playlist based upon those rules/limitation. Plus what type of music you like.
You have a incredible degree of control with smart playlists, they update automatically so you only set the conditions for what goes into them. Including content from other created playlists and smart playlists.
Then, when you hook up the smaller iPod, it has it's own sync options, "all of your music and playlists" or "only select playlists" So you use the second option to select just the smart playlist you tailored for the new iPod.
When you hook up the iPod Classic, only it's sync options are used, not the new iPod ones.
I hope I explained it better this time.

Where can I find GPIB drive for Stanford SR830 lockin amplifier for labview 6?

Hi I am trying to work with the lockin amplifier (Model: Stanford Research SR830). Unfortunately, my computer only has labview 6 installed. Could you please let me know where I can download a SR830 driver of GPIB version for labview 6? I have checked the NI website. Only drivers for LabVIEW 8.0 and up are available here. http://sine.ni.com/apps/utf8/niid_web_display.download_page?p_id_guid=240C113D3165071BE0440003BA7CCD...
Please let me know. If any one could upload one, that would be so great. Thank you.

Hi Wayne,
I am assuming you obtained the drivers from ni.com/drivers webpage? You can ask someone to convert it for you on the version conversion board and you should be good to go. If you create a new thread there please post the link to it over here so we can continue assisting you. Thank you and good luck!
Regards,
Basil
Applications Engineering
National Instruments

Labview GPIB Tutorial for sending commands to gen purpose equipment

Hi
I am reading an old NI GPIB "in-depth course" (in dos). It seems quite easy to send and receive GPIB command. Is there a GPIB tutorial for labview that will show me how to set up a piece of equipment and send/receive commands?
Wayne

Yes. If you have LabVIEW 6 or later, look in the LabVIEW Measurements Manual (a printed manual in your LabVIEW box, as well as a PDF installed with LabVIEW).
First of all, there are two ways to program GPIB. You can use the Traditional GPIB VIs, or you can use VISA. Both APIs are simple, but you probably want to use VISA. VISA works over GPIB, USB, Ethernet, Serial, etc., so learning it will apply to future projects, too.
In the 6.x version of the Measurements Manual, read chapter 20. In the 7.x version, read chapter 16. In either case, we have examples of using VISA to communicate with instruments.
This will give you a brief introduction to VISA. If you want to learn more, there are more advanced tutorials available on NI's web site, such as
href="http://www.ni.com/swf/presentation/us/instcontrol/">this one.
I hope this helps.
Brian

Looking for labview library

Like in the subject
regards
Kris

KZ;
You can find information about the National Instruments OCR library for LabVIEW here:
NI OCR Software
There are other OCR libraries for LabVIEW developed by third parties. I am aware of the following:
EconoCR for LabVIEW
Regards;
Enrique
www.vartortech.com

Library for Modbus ???

Hi, I have a project to control a motor system.
The communication is RS485 through Modbus via Serial.
The computer is the master and the control motor is the slave.
I have just one system to control
I found 3 free driver.
MODBUS Library for LabVIEW Version 1.21
http://www.ni.com/example/29756/en/
LabVIEW Modbus API v1.1.3.32
https://decibel.ni.com/content/docs/DOC-30140
MODBUS included in DSC module for LV2014
http://zone.ni.com/reference/en-XX/help/370622M-01/lvmve/choose_modbus_ioserver_vi/
I already made a development with 1.21 from NI.
Should it better to use Modbus library from DSC module ?
What do you suggest me ?
thanks in advance

Hi Minikisscool,
The Modbus Library for DSC is probably the more convenient to use but you need for that to have purchased the DSC module.
The option you have choosen (the free low level API) is probably the most commonly used and if you did not experience any particular troubles using it, I suggest you stick to it ; )
Have a nice day,
M-Junior

Frame Channel Conversion Library for LabwindowsCVI

Could someone help me to identify Frame Channel Conversion Library for LabwindowsCVI. I found a library for labview and it is working fine with my USB8473. But i really need to get it working with Labwindows. Have anyone tried to access the frchconvlib.dll from labwindows? Thanks in advance.

Unfortunately, the C API is not documented, nor is it stated as a supported interface.
With that said, you may be able to dig into the VI's of the Frame Channel Conversion Library and pull the function prototypes from the Call Library Function Node on the block diagram of each one. With this information, you could call the functions from the dll (usually located here: C:\Program Files\National Instruments\NI-CAN\CAN Frame Channel Conversion Library 1.0.2\Drivers) from within C.
Let me know your thoughts and if you have any success.
Regards,
Peter Flores
Applications Engineer

DAQmx support for Labview 8.0

I am having a problem with the current DAQmx Drivers,
The system used to run perfectly when using labview 8.0, however, after the installation of labview 2009
The DAQ library in the labview 8.0 folder is missing.
I tried to install the older version of the DAQmx (Legacy) but i still can't get the library back in labview 8.0 folder.
Would it possible to get those files ?
Thanks,
Ahmad Aladdasi
Mechatronics Engineer
Solved!
Go to Solution.

Hello again,
I tried to uninstall everything related to labview on the computer using msiblast, but still having the same problem, even after removing every labview newer than 8.0 files.
When I try to install DAQmx 8.6 it says a newer version is available.
I deleted the registry stuff to.
I had to keep labview 8.0 because it is the version i want to use plus i don't have the CD to install it, so i kept it and it's support files.
Can anyone send me the DAQmx library for labview 8.0?
Makesure it is the Vi files not the installation setup because that one will give me the same problem, " Newer Version is installed" problem.
Don't refer me to any extra links about installing, cuz honestly i have seen them all....
Thanks,

DSP Module For LabVIEW 2011

Dears,
I need the DSP Module For LabVIEW 2011, is it Available? and where can I Download it ?
Thanks
Ahmed Abdulbaky

Hi Ahmed,
I posted this in error. I did not see that Ryan had already answered this.
Ryan is correct. The latest version is 8.6
You can download the latest version of the DSP module from ni.com/downloads. The exact URL is shown below:
http://search.ni.com/nisearch/app/main/p/bot/no/ap/tech/lang/en/pg/1/sn/ssnavdl/q/dsp/#
I hope this information helps.
Regards,
James D.
Applications Engineer
National Instruments

I need HP4280 GPIB library for LabView 6i. Help.

Similar Messages

Maybe you are looking for