I need Imaq 1394 occurance config example VI, Any one succesful in using this?

If i am calling the Imaq 1394 Get Image VI without triggering the camera, it takes full CPU power and finally get time out. I need to use Imaq 1394 occurance config to solve this. But it is not working for me. Anybody having a working VI or examples?

I've never used the occurrence vi, but I am wondering what version of IMAQ 1394 you are using. I think the CPU overload was fixed in a recent version. If you aren't using 1.5, contact NI and get the free upgrade. You will need to provide information about your current license to get the upgrade.
Bruce
Bruce Ammons
Ammons Engineering

Similar Messages

When I refresh a page, a popup comes asking my confirmation because firefox will need repeat an action, so is there any way I can disable this?

Every time I refresh a page, a popup:
"To display this page, Firefox must send information that will repeat any action (such as a search or order confirmation) that was performed earlier."
...appears.
Is there any way I can disable this popup?
Thanks for the help :)

Thanks for the help everyone but I have tried safe mode, disabling addons, etc, it does not fix the problem..
Is there any way to disable this popup in the about:config?

I needed to change my i tunes e male address but i used this email address to open a 2nd account. I need to cancel the 2nd account so I can use it to change my old account. How do I do this?

I needed to change my i tunes address but I used the new e male adress to open a new account that I dont want. how do I cancel this account so I can reuse this emal adress for my old account.

I'm afraid that once an address has been associated with an Apple ID you can't re-use it in any way. You will have to create another address (such as a free on from GMail or Yahoo for example).

I've just came on board from Andriod and need massive help with the Contacts application any one out there willing to help the 'noob'?

I had the folks at the store port over all of my contacts from my old
ratty Andriod phone to my new shiny iPhone.
however all 200+ of my contacts sort of "shook" out,
meaning say John Smith, on my old phone,
had in my contacts the following:
John Smith
123 Main St. Anytown, Anystate USA
555-826-4879 home
555-799-4247 cell
[email protected]
johnsmith@facebook
all nice and neat on my andriod but when it ported over
all that information was just scattered all over my contacts sort of like:
john smith, smith john
john smith 123 main st. etc.
johhn smith home 555 etc.
john smith cell 555 etc.
john smith johnsmith@ etc.
etc.
so for all those 200+ contacts in my phone, I've got a zillion of them now...
so I'd like to get this all back in order before I and Siri explode.
I know nothing, and I know even less about outlook and the sort.
But I do know I am in Dire need of help with this... I figured that eveything else
involving iphones and apple in general was supposed to be cake but it seems
like this is the only thing that isn't cake at all... unless, I'm just a right idiot. (which is possible, hence spelling and grammatical issues).

I believe I've tried to sync it with google, but it didn't seem to take
muchless take my calender. it seems to favor my facebook calender
more over my google calender, but Siri seems to be helping me re-write
it...but that's not the game here, it's the contacts. I've tried to export
the cvp (??) list and import it into my iTunes account. However, It only
doubled my issue because it didn't over write my existing contacts.

Error 3194 occurs while updating my iphone to latest version, now i am unable to even use my iphone,any one guide me on this problem

I was using software 6.1 version when i want to update on latest version of iphone the error 3194 occurs on firmware stage at 75%, do anyone tell me why this error occurs or sugesion to resolve this problem?

Hi Tanveer_ahme,
If you received an error 3194 while attempting to update your iPhone, you may find the troubleshooting steps outlined in the following articles helpful:
Apple Support: Resolve iOS update and restore errors in iTunes
http://support.apple.com/kb/ts1275
Apple Support: Resolve specific iTunes update and restore errors
http://support.apple.com/kb/TS3694
Regards,
- Brenden

My iphone 3gs says I need to restore my phone with itunes. when i connect the phone it says i need to unlock the phone which i cannont due because of the caution saying i need to restore. does anyone have any idea how to fix this problem

My iphone 3gs says I need to restore my phone with itunes. when i connect the phone it says i need to unlock the phone which i cannont due because of the caution on the phone. How do i fix this?

Hold down the power button and home button at the same time until the phone powers on, shuts back off, powers on again and continue to hold it until it shows the itunes logo to plug in to itunes. This should allow you to restore without unlocking it.

Any one with BT using Apples Mail need help

Hi
Anyone with BT and using Apples Mail please can you please send me all the settings that are needed. I have tried BT web site and even used on line help but nothing has helped. The problem is I can receive but not send, the message goes into the out box put then keeps coming back saying ""Too many messages" and this keeps happening over and over, sometimes in the mail activities box it says one of three when there is only one.
TA

a quick point, my stacks are EJB3+Hibernate+MySQL, don't know if hibernate has anything to do with my question...
again, thanks.., pls provide ur input/insights...

Need help in my code . Can any one please help !

In my report ihave written
'STOP' in the middle while printing out soma data.
But the display stops there.
After that i have again some write statement.
but how to restart execution for furthur printing.
tell me the syntax.
reatart, resume.....anything like that ?????

Hi,
Try Using EXIT or CONTINUE Statements.
Regards,
Satish

I have three identical templates. I need to delete two of them. Any idea how I do this please?

I feel so silly but I'm trying to delete templates and have no idea how to and there doesn't seem to be an obvious solution. Please help if you know how. Thank you!

Deleting files is a task dedicated to the Finder.
Navigate to the folder containing the file. If it's really a custom template, AnaMusic gave the correct standard location.
My own practice is :
select the icon of the unwanted file
press : command + delete (⃪)
Yvan KOENIG (VALLAURIS, France) samedi 26 janvier 2011 21:53:33
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community

Need lock for I message to prevent any one to open it

Is there lock for I pad I message

No, but there is a passcode lock for the iPad itself in Settings > General, which will prevent anyone accessing anything, not just iMessage.

I'm trying to create a Windows partition using Boot Camp. An error comes up telling me that I need to reformat my current partition(s) into one single partition. However, it's already formatted in the correct format, and is already a single partition.

As made clear in the title:
I'm trying to create a Windows partition using Boot Camp. An error comes up telling me that I need to reformat my current partition(s) into one single partition. However, it's already formatted in the correct format, and is already a single partition.
My computer recently had a kernel panic, which apparently the corruption was in the system and needed to be erased and re-installed. I have a complete back-up using an external hard drive, and I am definitely not willing to do another one of those to reformat a partition that is already singular. I restarted the computer after ejecting my back-up, and after turning off time machine (thinking that boot camp was recognizing it as a secondary partition), however the error still occurs.
Is there any way to get around this?

diskutil list:
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *750.2 GB   disk0
   1:                        EFI                         209.7 MB   disk0s1
   2:                  Apple_HFS Macintosh HD            749.3 GB   disk0s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:                            Windows7               *2.9 GB     disk1
diskutil cs list:
No CoreStorage logical volume groups found
mount:
/dev/disk0s2 on / (hfs, local, journaled)
devfs on /dev (devfs, local, nobrowse)
map -hosts on /net (autofs, nosuid, automounted, nobrowse)
map auto_home on /home (autofs, automounted, nobrowse)
/dev/disk1 on /Volumes/Windows7 (udf, local, nodev, nosuid, read-only, noowners)
From my very basic knowledge - it still looks as if there is only one partition (not including the windows 7 CD necessary to install the windows partition).

I have MAC OSX 10.5.8 and need to install adobe illustrator. I checked the compatibility and found that CS5 will work.Can any one help where i can find it. The trail version is fine with me.

I have MAC OSX 10.5.8 and need to install adobe illustrator. I checked the compatibility and found that CS5 will work.Can any one help where i can find it. The trail version is fine with me as i just have to use it for couple of days till i get my mac book back from service. Can any one help me on this.

You are welcome, ameronweb.
To elaborate a bit, you may come across offers of a new/unopened/unregistered version, which is the simplest case (you would need a guarantee). Other cases require much detailed information (and a guarantee).
If upgrading to 10.6.8 or higher is an option, you could use CS6.

More than one struts-config.xml files in one project

Hi all
Can we have more than one struts-config.xml files in one project developed using struts.
If so what is purpose and how to do this.
Anybody please explain on this topic.
Thanks
Parvathy

Hi all
Can we have more than one struts-config.xml files in
one project developed using struts.
yes it is possible
If so what is purpose and how to do this.
it is use for odular application so developer won't share a single configureation file.. as you know struts-config.xml is defined on the web.xml
like this:
<servlet>
<servlet-name>mybank</servlet-name>
<servlet-class>org.apache.struts.action.ActionServlet
</servlet-class>
<init-param>
<param-name>config</param-name>
<param-value>/WEB-INF/struts-config.xml</param-value>
</init-param>
<init-param>
<param-name>config/module1</param-name>
<param-value>
/WEB-INF/struts-module1-config.xml
</param-value>
</init-param>
</servlet>

Need a simple 3d text application. Any ideas?

Need a simple 3d text application. Any ideas?
I used to have a simple program called logomotion, but it has been discontinued. I just need something that I can just type "Welcome bla bla bla" and it will give me a few options like spin, scroll, random. Like that screen saver on PC where you just type in your companys name and it spins around 3D. (dont need anything crazy like maya,- any ideas!

you could also check out Blender:
http://www.blender.org
free, open source, etc. i've never used it, but it looks fairly full-featured. actually, i think that might be something i'll download and check out this weekend, come to think of it.
PowerMac G5 2.5GHz Mac OS X (10.4.5)

Ring acquisition with NI-IMAQ 1394

Our project requires saving captured images onto the hard drive with no frame loss, so Grab acquisition may not be sufficient. I wonder if there is a way to carry out ring acquisition with IMAQ1394 like that of the original IMAQ?
I was hoping to find equivalent functions of "IMAQ Configure List.vi", "IMAQ Configure Buffer.vi" and "IMAQ Extract Buffer.vi" in IMAQ1394, but none of them seems to exist.
"IMAQ1394 Get Image.vi" appears to be able to accept only one image at any one time, the option, image index, seems to be redundant to me. The example "Low-Level Sequence.vi" still runs after I removed the connection between the loop counter and "image index".
It is also unclear what the option, "no. of buffer" in "IMAQ1394 Configure
Acquisition.vi" could do. The example mentioned above uses multiple buffers, but nothing is connected to this option.
On a side note, I found that the buffering in IMAQ 1394 is not as logical as in IMAQ. Image(s) created along side the acquisition configuration would be used as its buffer frame(s) even though there is no connection between the two.
I would be very grateful if someone could share their ideas.
Regards,
Calvin Tsang
PS. I'm using IMAQ1394 version 1.1

Calvin,
This is one of the biggest problems I have had with IMAQ 1394. I was able to set up a continuous buffer, but there is no way to find out which buffer is the current one. The other problem with IMAQ 1394 is that it is software based instead of hardware, which means your CPU speed and operating system latencies can all affect it and make you miss frames.
What I ended up doing was making my own buffer, and using Grab to get each image. By checking the time elapsed between each frame acquired, I was able to detect missing frames. As long as the frame rates were low or I didn't update the display very often, I rarely missed frames.
My basic conclusion is that IMAQ 1394 is much better for snapshot type applications. Applications that require
continuous video with no missing frames work much better with the IMAQ boards than 1394.
Bruce
Bruce Ammons
Ammons Engineering

I need Imaq 1394 occurance config example VI, Any one succesful in using this?

Similar Messages

Maybe you are looking for